S12 VIA upgrades

Similar Questions

• Where can I download BIOS 23 for Windows 7 32 bit S12 VIA?

  Where can I download BIOS 23 for Windows 7 S12 VIA?

  I cann't it search.

  

  All drivers Lenovo here m8 - http://consumersupport.lenovo.com/au/en/driversdownloads/drivers_list.aspx?categoryid=607007

• I can't stack (previously in version sets) photos imported via 'Upgrade PES catalogue'. Why not?

  I am currently using LR 3.6 on a Windows 7 OS / HP laptop.  Previously, I organized my photos using PSE Organizer 9.  When I went to 3 LR, I have selected the option Update my catalogue of PSE to put my photos on LR.  LR imported pictures and keywords/sides but not my version sets or smart albums.  I understand that LR doesn't have version sets so I would have to manually reinstall my pictures but now LR is does not give me this option.  Photos that were previously in a PSE defined version are displayed as the unstackable (all battery options are grayed out) even if they are in the same folder on my hard drive.  I have trouble finding anything on the web that deal with this issue.  Any help/direction would be very appreciated my catalogue is rather heavy at this point.

  Thank you

  Sierra

  In the catalogue on the left panel, you have selected "all photos"? You selected the two photos to stack until you tried to stack them? Both must be highlighted, then stack should be available.

• Upgrade of RAM for S12 with VIA NANO

  I just bought a S12 with VIA NANO processor (using right now).   I want to upgrade the RAM on it, but have a few questions.

  1. the amount of RAM this processor can handle?  It is specific to the operating system (Vista vs XP vs Win 7)?

  2. what type of RAM is the requirement VIA.

  Hi, if you update the new BIOS for S12 Via machine

  S12 VIA BIOS 23

  Summary of changes 20CN23WW: supports 3G of RAM.

  You can Upgrade to max 3 GB...

  Thus, every good brand S0 - Dimm DDR2 667 or 800 MHz 2 GB Memory Stick could do the job...

  Corsair, kingston, samsung, hynix, I wish...

  cordially KalvinKlein

• The s12 2959 to 3 GB upgrade

  Hello!

  I recently bought a 2 GB of memory (as specified - PC2 5300 SODIMM 667 MHz) for the upgrade of my ideapad s12 2959 GTM.

  After soliciting support and forums I have seen that it is necessary to update the Bios for this group.

  The thing is that I've recently updated my OS XP Home to Windows 7 32-bit.

  There is no updated BIOS for Windows 7.

  Is it possible to run the XP update on Windows 7 driver? I have to reinstall XP to install this Bios driver

  update the firmware?

  Thank you for the support.

  Hello and welcome if your S12 Via Nano comes with S12 VIA BIOS 23 or more...

  Summary of changes 20CN23WW: Support 3 G RAM, you can Upgrade to max 3 GB...

  Think that latest comes with a higher BIOS > 23 it is not necessary to update BIOS...

  Thus, every good brand S0 - Dimm DDR2 667 or 800 MHz 2 GB Memory Stick could do the job...

  Corsair, kingston, samsung, hynix, I wish...

  How to install...

  

  remove the battery, open the back cover... 2 screws... the new S0 Dimm DDR2 memory stands in one direction...

  to have contact... .Insert in law... .slightly press on in position and press it so that left and right click to for memory locks...

  cordially KalvinKlein

• Envy 17 3010eg: upgrade to Windows 8 and update Bios: no switchable graphics and other problems

  Hello

  I'm of the Germany, but I'll do my best to write this in English.

  The product name and number: HP Envy 17 3010eg {information}

  Operating system: Windows 8 Pro 64-bit

  Drivers: everything up to date

   

  Long story short,

  I just wanted to upgrade the pre-installed Windows 7 Home Premium 64 - bit to the new Windows 8 Pro 64-bit.

  So I waited until the driver for Windows 8 support has been completed by HP.

  This month, I noticed that HP has released a graphic driver for Windows 8.

  Happy as I was I installed Windows 8 immediately via upgrade function.

  I installed all the missing drivers.

  * Update Bios to F.08*

  I noticed that I had to upgrade my Bios to version F.08 to install new graphics drivers. I did the upgrade and installation of the driver.

  BUT after the update to the version of the Bios the laptop only F.08 recognized the AMD graphics card. The integrated Intel HD 3000 graphics card had disappeared!

  Even after installing the new graphics driver, the Intel card is still missing in the 'Device Manager' of Windows 8.

  The battery life is now about 1 1/2 to 2 hours maximum because the laptop always uses the card AMD.

  So I looked in the 'new' Bios, but I have not found a way to change the graphics card. So I think that there is only a 'software' switch to do so.

  I have installed "AIDA64"and look under "Graphics".» The graphics card Intel HD 3000 has been mentioned as 'disabled'.

  Nice, but I have no idea how to turn it on again.

  So I re-installed Windows 8. This time, I did a completely clean install. With the same results.

  So, I switched to Windows 7, and there you go. Two graphics cards are displayed in "Device Manager" and the switchable graphics feature works perfectly (! even with the new version of the Bios F.08!).

  * Tested in Bios Version F.09*

  Yesterday, I noticed another Bios Update. This time in version F.09.

  So, I updated the Bios with Windows 7 installed.

  Everything went well (I thought!).

  Once, I've done a completely new installation of Windows 8 to take a peek, if Intel HD 3000 card will be recognized this time.

  BUT without success...

  So, I thought that the problem could only be Windows 8, because Windows 7 works perfectly.

  * Problems with Bios Version F.09*

  BUT then, I noticed a strange behaviour of my laptop:

  -proximity sensor no longer works

  -the keyboard backlight cannot be (DIS-) activated

  -the brightness of the backlight is half as usual

  -internal fans are going crazy-> they accelerate without reason (laptop is idle) and won't slow down until I do a re-boot

  * Version of the Bios downgraded to F.05*

  So, I spent to the version of the Bios to the older Version available: F05

  And I was a little shocked by the result.

  Windows 8 acknowledged the Intel HD 3000 graphics card again!

  The problem is the Bios!

  Then, I upgraded the version of Bios version to see which version of the cause of the problem:

  Œuvres F05

  Œuvres F.06

  F.08 does not work

  F.09 does not work

   

  So I decided to stay with the version F.06

  BUT to install the new Windows graphic 8 driver you need the version of Bios F.08 (min.).

  I installed the driver anyway...

  I found myself with a black screen... I had to reinstall Windows completely.

  Yet more long story short,

  I ended up using Windows 8 Pro 64 - bit with the graphics card AMD only.

  I also updated the Bios (back) to the version F.08 dispelled the problems with the version of the Bios F.09 I mentioned.

  So for the moment I am absolutely no idea what the problem might be.

  The support has not yet heard of these problems and I have not found any website which explains the same problem.

  Every posting, I found explains that the AMD card is not recognized by Windows 8 but Intel HD card.

  Someone else got the same problems?

  What do you think? Is it really a problem with the Bios?

  What can I do to solve the problem?

  for me the best driver are:

  http://leshcatlabs.NET/

  Works Perfekt (cards during execution of the F06 BIOS and a map when F08/09) and are updated often.

• How to change the disk?

  Hello

  How can I remove the old drive and put a new? Please give some instructions

  Hi, no one could help you without announcing your Type and model

  I read / answer your other post...

  I'm talking about that you will upgrade your S12 Via...

  An owner in Germany change the HARD for one SSD drive in S12 his language German but well illustrated photos.

  Change disc HARD S12 translated

  German origin of Thread change S12 HDD ...

  cordially KalvinKlein

• Get the most out of my old Mac

  I have an old Mac with OSX 10.5.8 - assuming that I am not in a position to replace the right now, what is the best performance I can get out, via upgrades etc. ?? Any help appreciated

  I have an old Mac running 10.5.8.  It's a Power Mac G5, and I could use it as my Mac primary (for most things), if my Intel Mac mini came down.  It has 4 GB of RAM; It could go much higher (up to 16 GB), but 4GB seems to be more than enough for the race of Leopard.  It has a 128 GB SSD as the startup disk, and the other internal drive is a hard drive 2 TB.  The currently-installed video card is stock - nothing special, good enough for my application.

  It is connected to the TV in the living room for display; It is "hidden" behind the HDTV.  It uses my system stereo as its speakers.  It acts as my network storage "data dump".  I can watch videos on web sites like YouTube (although less of it since getting an Apple TV), as long as the web site uses based on HTML5 video (not Flash video-based).  The latest version of iTunes for Mac PowerPC (10.6.3) still work with current iTunes game service, so I can listen to my library of music complete iTunes on this subject.  Since it's next to my stereo system, I did and still do audio recording (using an older version of GarageBand).  For example, to scan tapes and old LPs of music.  I also use it to record audio from my TV decoder.

  I don't know if you have an iMac G4 or G5.  If it is a G5, it can substantially benefit an SSD, because it has a SATA interface.  For a G4, because of its old PATA interface, an SSD is probably less effective to increase overall performance.  But it would probably improve things like startup time, and it can benefit an iMac (G4 or G5) by producing less heat and making less power compared to a standard 3.5-inch hard drive (less stress on the aging system).  Certainly maximize its RAM.  Storage and RAM - you can't really do anything else internally, since this is an iMac.

  For the software, Use TenFourFox as their web browser.  Safari for 10.5.8 is old and does not have to be updated over the years.  TenFourFox is a special version of FireFox, actively maintained by a dedicated developer, optimized for Mac PowerPC under Tiger or Leopard.

  http://www.floodgap.com/software/tenfourfox/

  TenFourFox, that's what makes my PowerMac G5 can still be used as a computer 'every day', more than any of its hardware upgrades.

• Satellite Pro S300-12O - Sound Forge 8 does not

  Hi guys out there, I hope someone here can give me some advice.

  First of all, I have a laptop Toshiba S300-12O bought in January. I downgraded to XP Pro via upgrade disk lower.
  I had zero problems until recently when I installed Sony Sound Forge 8 on the machine. I tried to burn an audio CD using SF8 and the machine hung, SF8 answers do not. Nothing worked at all and I had to manually turn off the machine. Had another crack at it and she said then there was a serious error and the PC have closed, etc..
  Sent the error report to Microsoft when the machine has restarted and said that he had recovered from a serious error, etc.

  This could be a driver problem? I had a quick glance but can not find the drivers out there apart from the one which allows you to play DVDs on the laptop.

  The optical drive is TEAC DW-W28-RT multi layer. I can open the drive to SF8, not tried burning mp3 mp3 files or anything yet.

  I have not tried burning a disc audio using any other utility still or actually burned anything on any software. SF8 is my overwhelming favorite and I would use it as I do a few edition of music etc and this is my software of choice. Any advice greatly appreciated guys.

  Hello!

  To be honest, this program is not for me, but in my opinion, you should look for an update on the site of the factory.
  Check if the program is compatible with Windows XP.

  Last but not least, you should check if you have the same problem with another program. I think that it is a question of the program that you are using.

  Good bye

• Network wireless and Bluetooth card no longer works...

  Hello

  I guess I did something very stupid.

  I had an Ideapad s12 via nano 2959. While the closure of Windows XP, I turned off the wireless switch. After reboot I lit it again once, the blue icon, the white light on the front edge of the dark rest netbook and wireless, nor the network card or the bluretooth seems to work more. The bluetooth of the systray icon displays in blue and Red instead of blue and white. Wireless systray icon as not connected, a scan of wireless networks you find no.

  In Device Manager, I'll see under "Bluetooth-devices" only "-Bluetooth enumerator. I don't see anything in the enumerator "Bluetooth."

  While I find the adapter wireless network installed, enabled and working properly...

  Didn't destroy my wireless devices by cutting so that the closing...?

  If so, why the adapter wireless network will show as being installed, active and functioning correctly in Device Manager?

  Hello and welcome check the Menu Fn + F5 softswitch...

  cordially KalvinKlein

• Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. Prva Nice

  Firefox asked me to upgrade my sound system & in the process, I have installed a Zombie and I can't uninstall it in Windows 7 via my control panel. I expected more of Firefox as a privacy feature!

  Sorry to hear about this, you should always beware of the pop-ups - never open or install anything, unless it is on the official website. Firefox has built-in features (and extensions that you need to find and install) to protect your privacy and security, but all users must still be careful with their browsing habits. You can report malicious links to the FBI Internet Crime Complaint Center here: http://www.ic3.gov/complaint/default.aspx

  You can also report false web documents by clicking on:

  • Help > report false Web, or
  • 

    >

    

    > Report false Web

  Regarding your malware, please follow this guide:

  • http://malwaretips.com/blogs/zombie-alert-virus/

  After removing your malware, consider extensions such as Adblock Plus.

• I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8?

  I have an iPhone 4S model A1387. I want to upgrade to ios 8. I currently have ios 7.1.2 (11D257). When I try to update via iphone or itunes on my mac, the answer is "your software is up-to-date." How to upgrade to ios 8? I need for a medical application that requires ios8 or above.

  Force restart your iPhone.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  And then tap settings > general > software update

  If this does not help, make sure that your Mac running the latest version of iTunes.

  You can do this by clicking on your top  Apple left of your screen.

  In the drop-down list, click: App Store

  After the opening of the App Store, select updates in the upper part of the menu of the window of the App Store.
  

• I just upgraded to Firefox 8 and now I can't connect to webpages about via Mozilla. I can always connect through Internet Explorer.

  I've upgraded to Firefox 8 and I can't establish an internet connection to any webpage via Firefox. I removed the Firefox program and re-installed through Internet Explorer with the same results.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• Portege A600 upgraded to Win7 can't find any networks via 3g

  I have a Portege A600 with initially installed Windows Vista.
  Due to a non hard drive work, I upgraded my hard drive and my operating system to Windows 7.
  Installation went well.
  Went on the Toshiba Support Site for drivers and eliminated all of the missing devices.
  The Device Manager has more no unknown device. So far so good.
  more I installed the fn feature, don't know what was the name of the package.
  and more the Wireless Manager.
  all the drivers are the latest versions.

  (1) the Wireless Manager told me after the reboot whenever the modem 3g is deactivatet.
  so I activate it via the next reboot rem. I do the same thing. very irritating and annoying.

  (2) * this is the real problem.* even the modem was found, and I have to type in my code PIN of the SIM Wireless Manager cannot find all of the 3g networks. what I have to do a special configuration in Wireless Manager or elsewhere?
  I have freenet as a provider of the Germany.

  Hi dude

  I found Nice Toshiba 3 G portal where you can find some interesting material (FAQ and manual)
  Please take a look in this HowTo:

  + How to create a Dial-Up connection with 3 +.
  http://APS2.toshiba-tro.de/KB0/HTD9802OF0000R01.htm

  It provides beautiful description how to set up the 3G connection.

• HP Photosmart B110a: HP Photosmart B110a cannot print via wifi after upgraded to windows 10 notebook

  Before I updated to windows 10,

  I can print via wifi.

  But now I can't.

  the error says that there is some connection problems.

  But I could not understand what is wrong.

  We need to make a configuration under windows 10?

  Thank you

  Hi ma1210,

  Given that this problem occurred after the upgrade to Windows 10 I think your best option would be to uninstall the printer driver and reinstall Windows 10 drivers for the printer. You can download Windows 10 drivers for this printer by going to HP support at www.support.hp.com site - then enter your product information IE HP Photosmart B110a... change the Windows 10 operating system, download the driver and install it. According to me, which should solve the problem. All the best...