Satellite Pro S300-12O - Sound Forge 8 does not

Similar Questions

• Satellite Pro S300 - screen is blank and can not restart

  A week ago, I left my Satellite Pro S300-EZ2502 at night (as usual). It was fine tonight.

  The next day, I got a black screen and a flashing light orange on the left side. I tried to turn it off, don't restart, no dice. I tried removing the battery and restart under just current alternative, nothing, I tried the opposite. Nothing. I tried to let the battery and then recharge. No help. Very rarely when I plug it in again, I will get the green light for a few seconds, but then again the yellow flashing light. Nothing EVER on the screen.

  I've only had this laptop since MAY! What's wrong!!

  Have you installed extra RAM in the system?

  Try to remove one of the Modules or swap them around.

  Otherwise, it may be a motherboard problem. An FSL can repair it for you - free if its under warranty.

• Satellite Pro A300D - reinstalled XP - now its does not work

  Recently, I had a virus on my laptop Toshiba Satellite Pro A300D-14O, which meant that I had to take it to get reinstalled Windows.
  This tech guy who I gave it to a do.

  However, now, the sound does not seem to work properly.
  The volume on the laptop wheel itself does nothing.
  I tried to open Control Panel to check the sounds and audio devices, but I could not change anything in the boxes.

  I tried to download a driver from toshiba Web site was updated, but I thought that it could not find the device driver support.

  Can anyone help?

  Hello

  You must install the Win XP SP3!
  This package must be installed BEFORE installing the audio driver.

  Install SP3
  Then remove the audio driver (already installed) system
  Go to Device Manager and remove the sound chip of the list of devices
  Restart the device
  Now reinstall the sound card driver.

  Should work as it worked in my case as well

• Satellite Pro L300-1FL - WLAN network adapter does not exist

  Model: Satellite Pro L300-1FL (PSLB9E)
  Operating system: XP Pro SP2
  Wireless card: PA3616u-1mpc (atheros AR5007)

  the laptop came with pre-installed vista, everything worked very well (including wireless), although a little slowly, but decided to downgrade to xp. integrated SATA drivers into my xp with nlite installation disc. XP installed fine. visited the toshiba support site and downloaded all the drivers for xp and install.

  Despite the installation of the wireless driver there is still no present in the wireless network card device driver. It is an "unknown" device listed, which I think is the wireless card.

  at first I was not sure what card appeared so systematically installed that all options of wlan of the toshiba download page [intel/atheros/realtek], none has worked. little more digging autour and discovery was a then reinstalled atheros atheros wlan client on the toshiba site. still did not work. found a update atheros ar5007 driver installed, still no joy.

  forward wireless switch is on [the orange light] and has been throughout the process. have you tried enabling / disabling fn + F8, which doesn't do anything.

  I think I read somewhere (having read much too many post on this over the last few days!) that update the BIOS to version 2.4 can solve the problem. However the version offered for my model by the toshiba page BIOS update is 2.1 (which I've updated when you install all drivers in xp) and I'm not that eager to update the BIOS to a version that is not supported by toshiba, because I have no idea how fix an incorrect BIOS prevents starting the computer.

  When you look at the BIOS option "wake we wireless" is grayed out and not selectable. There is no other network without wire/related parameters. This might infer that the BIOS does not recognize the card wireless for some reason any. whereas he should have before, I started to lose its time, as worked it fine under vista wireless. so I think that upgrading the BIOS might have broken, although I can't be sure that I've updated the BIOS until I realize that the without wire did not work under XP, so it could have been broken before the BIOS update. Does this sound plausible? also, I have no idea how if is take to solve this - you can downgrade the BIOS?

  any help greatly appreciated - have been pulling on my hair for 2 days now and there is only so much googling, you can do before find yourself you constantly re - visiting the same sites over and over again!

  Thank you

  ~ andy

  worried that he may have been conflict for different drivers wlan I had initially installed, so have done a complete re - format and re-installation of xp. Install the drivers, including the wlan driver atheros. but still no adapter wlan in Device Manager.

  the unknown device in the other section of the Device Manager is listed as an ethernet controller; However glancing upward from the PCI/VEN # (C & DEV_001C 168) on the basis of data from the provider PCI identifies that this is indeed the atheros card.

  This means that it is not a hardware/BIOS problem as I previously suspected. XP can 'see' the device, but for some reason, the driver won't work. Hmm

  someone at - it had a similar problem? is it just a matter of finding the "correct" driver

  Thank you

  ~ a

• Satellite Pro S500-139 - FN + F9 key does not have to turn off the touchpad

  Hello

  I use a Satellite Pro S500-139 and am having problems with my F9 key. When I tap my palm touches the mouse and send the cursor somewhere else on the page. I reinstalled the ALPS pointing device and now have access to the Advanced setting that I was not able to get.

  Although I can set the sensitivity etc. I would really be able to use the shortcut to disable the mouse momentarily while typing. My keyboard shows that, if I press fn and F9 the i should be able to disable the mouse but the function does not work. F9 all other functions seem to work.

  Do you know if there is a solution to this?

  I am running windows 7 pro 32-bit service pack 1.

  What you can try is to reinstall extra package from Toshiba.

• Satellite Pro A300 - 1 H 2 - Windows does not recognize the HARD drive

  Hello

  I'm a newbie, which has probably asked bin before so if You ' l excuse me, I have a satellite pro A300 - 1 h 2.

  I got the volume of unmountable boot blue screen, then tried to adapt to a new samsung drive. I put in my windows disc it will load all the drivers, then says that there is no hard drive?
  In the bios, it recognizes it?

  Thanks if anyone can help

  Hello

  The problem is that your laptop supports the SATA HDD controller but the system OS does not contain the SATA drivers
  You can assign in the compatible SATA mode BIOS.
  This allows you to install the operating system without installation of the SATA drivers.

  Welcome them

• Satellite Pro P100-465 CD/DVD drive does not.

  My Satellite Pro is new and I was very happy with it until I started one day find my CD/DVD drive not recognized.
  Initially that the drawer does not open yet, it does now but only after a few presses the eject button. When I put a disk in it spins and the drawer light flashes briefly, but then nothing?
  The CD/DVD drive is not displayed in Device Manager is?

  Can anyone help please?

  Hello

  I'm not an expert so take what I say with a large pinch of salt and check again! I have a similar problem with my A100 except the works of CD tray very well but the machine will not play some DVD and won't play any CD several people have suggested that download ITunes affects your registry files and shortly after that the machine does not recognize the CD/DVD driver.

  The error message that said something like: "i/o device error".

  Have you tried to download a new driver? I have that have not yet done and came here to seek to verify this info myself.

  Anyone else heard about Itunes affecting your laptop in anyway?

• Re: Satellite Pro A100 PSAA3E: after XP installation does not work

  Hello

  I recently bought a psaa3e Satellite Pro A100.
  I formatted and installed Win XP. Everything works except the sound.
  In Device Manager its shows a PCI device problem.

  I think I need the pci to install before my sound card is recognized.
  I could be wrong and often am installed all drivers I could find on this site for my laptop.
  Any suggestions please, its driving me crazy.

  brgds

  spadger

  The solution is simple.
  After installing Xp, you must install all the service packs. SP2 is important.
  In addition, you will need to upgrade the XP to the last State. All fixes and patches must be installed also.
  The * KB888111 * and * KB835221 hotfix * must be installed before installing the audio driver.

  After installing the hotfix, restart the computer, and then reinstall the audio driver!

  Good luck

• Satellite Pro A300: Win 7 Upgrade DVD does not list my laptop model

  I bought a Satellite Pro A300 that came with Windows Vista pre-installed on it. I was offered a Windows 7 Uprgrade for 30 by Toshiba that I bought and got 2 discs:

  (1) Windows 7 Upgrade disc
  (2) Toshiba Win7 Drivers Upgrade drive

  I have updated successfully however the drivers Toshiba disk does not list my model of laptop. I tried to install the drivers on the disk for the OEM software such as drivers of web cam (which are not available online), but they do not work. Also now my DVD player does not open and I can't view the contents of the disc?

  Can someone advise who I come into contact with to get a drive for my laptop model?

  Hello

  What model of laptop do you have?

  Have you tried to choose another model instead of your laptop model?
  Do this!

  I read about a similar question here in the forum and the user could solve this choose another laptop model number.

  By the way; all Win7 drivers can be downloaded from the page of European driver from Toshiba:
  http://EU.computers.Toshiba-Europe.com

  See you soon

• Satellite Pro L20 - recovery utility hangs and does not complete

  Hello.

  I've been running my L20 Pro Satellite for two years now, quite happy. Unfortunately, in the last 3 months, he began to misbehave. The startup time stretched to 5-10 minutes by that I mean time spent in "black" screen between the initials XP boot logo and the bright blue splash screen Windows. Playing sound/media crackled and stuttered badly through the loudspeaker. So, being reasonable technical, I've read various articles forum tried MSCONFIG tweaks here and there, removed all viruses etc... Nothing helps.

  I began to suspect a HARD drive problem. CHKDSK has not shown any errors. I finally resolved to back up my data and attempt a complete recovery. (Virgin!)

  Unfortunately, this is going to plan. medium 90% up to the end of the NVA Toshiba Recovery Utility 1.0.1.0 I think, started making subtle beeps and stopped on the 'X:\03596002 '. File of the GHS. The Green HARD-drive activity light has renounced his reassuring twinkling. Nothing.

  Any suggestions tips out there? I am currently in the State where he can not start (no NTLDR found).

  Help.

  Thank you.

  HDD on SP L20 interface is - Serial ATA Rev. 1. 0a.

  For the replacement of Satellite Pro L20 HDD or upgrades, you can use follow hard drives:
  With 4200 RPM.
  Fujitsu MHV2060AT
  Fujitsu MHV2080AT
  Fujitsu MHV2100AT
  Toshiba MK6025GAS
  Toshiba MK8025GAS
  Toshiba MK1031GAS

  With 5400 RPM
  Fujitsu MHV2060AH
  Fujitsu MHV2080AH
  Fujitsu MHV2100AH
  Toshiba MK6026GAX
  Toshiba MK8026GAX
  Toshiba MK1032GAX

  So, you can choose one of these hard disks for upgrade. If you now of 60 GB inside buy 100 GB for replacement.

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Satellite Pro P200: Reinstalled audio driver - microphone does not work

  Satellite Pro P200, bought Jan 2008.

  Managed to disable onboard intervene somehow, trying to disable them so that when I got the USB speakers loud the built-ins would not interfere with the sound.

  Driver installed P200_X200_Audio_Vis3264_6015477_1.exe.

  Speakers work fine now - microphone is not.

  Any ideas?

  Thanks, Dave

  Did you check the audio settings in Windows Vista?
  Maybe the microphone is muted or the volume is at the lowest level. Did you check that?

  In addition, I would recommend reinstall the sound card driver. Remove the old version first and then restart the computer and install the latest version on the Toshiba site.

  You use the factory settings or you have installed your own version of Windows?

• Satellite Pro A60: TV S-VHS on does not work

  I have a Satellite Pro a60 and I'm pulling out my S-VHS to function... This does not work very well.

  I connected all the cables right and right click on the desktop, again choose preferences, then on Preferences, but I can't find anything on the transmission of the video signal.

  I have not though as the configuration standard of Toshiba, but that shouldn't matter. I'm running WinXP SE, but the drivers for my card ATI is about two years old and I can not find a suitable one anywhere, this is the problem, or should I program utility ATI?

  Best regards!

  Hello

  You should also check the TV settings. You must choose the right channel.
  As in the previous announcement suggested, you can change the display device using the FN + F9 key combination.
  If you want to play the DVD with the WinDVD player for example if you first need to change the output of the TV and then start the WinDVD.

• Satellite Pro A300 sleep and extended functions does not properly

  I have a new satellite Pro A300 PSAJ1E - 01E00VIT, and I find this problem:

  Sometimes (not always: maybe it depends on which program is running) in trying to put the computer to sleep or into hibernation, it does not stop, but only stop the monitor (Panel), while the fan goes on and the power light is green. Of course, a lot of energy consumption of battery!

  Then there is no other way to take off the computer by pressing the power button for a long time... but this is not correct!
  NB: my computer is always connected to a local network, and generally there are some browser windows open when I put it in stand-by mode.

  How can I fix?
  jomurray

  You must update the BIOS and must always close the programs and applications that ruin on the laptop before activating the standby mode or hibernation would be.

  I found this solution in this forum, and according to some people here it has solved similar problems

• Satellite Pro L20-212 - USB 2.0 does not work

  Hello

  I own a * Satellite Pro L20-212 *, * Windows XP (SP2) is installed, but USB2.0 does not work *. I see nothing on USB 2.0 in the Devicemanager and the speed of the USB 2.0 devices attached is at the level of the USB 1.1.

  I don't know what information is needed to help me with this problem as it should normally work on my laptop (and I know that the laptop has USB 2.0 ports).

  What I have to install a special driver to use USB2.0 or is there any software on my laptop that I need to activate?

  Thank you very much
  Frank

  Hello

  Did you install the image on the Toshiba Recovery CD? This image contains the Windows operating system, Toshiba drivers and additional utilities. After installation, everything should work fine, and also the USB ports should work also.

  The USP ports, you can find in Device Manager in the serial BUS controller universal section. Open the tree and check if there is some yellow exclamation points.
  Then try to remove the Device Manager, the controllers and the USB hub and restart the laptop. After restarting again the OS should recognize USB controllers deleted again.

  I hope that this accelerated procedure will help you.

  Greetings