S2340L, issue of hue

Similar Questions

• Issue of hue saturation

  Hello photoshopers.

  I have two images that are the same, the one on the left deliberately I changed its color using the hue/saturation, a bluish color.

  on the right is the actual color that is red Crimson.

  Now if I want to change back to a blue to Crimson red, is there a way rather that play with the sliders hue/saturation to get the info of the exact color of a picture, and then type the RGB/CMYK values and get the result.

  Thank you.

  Overlay one another and use the blend color or tint mode.

  Or create a solid color layer and do the same thing.

• Issue of hue PMS

  I'm working on a paper header which is printed on an offset press. Logo of the company must be a tinge of 40% of the spot color PMS that we use.  I don't know how to create the shade, but my question is: How can I determine what will be the PBA of the color of the screen?  Is it possible to specify in IT or ID, or is - it still controlled by printing?

  I obviously want the points in the tint to be as discreet as possible in order to keep the logo looking, smooth and clean. Are there standard screens used on a site like this, on uncoated paper, or every print has its own standards?  What is this driven by the imagesetter software? Years ago, I have would have specified a screen 133 lines for something like that, but I don't know if the technology or the terminology has changed.

  Thanks for any help you can provide!

  LPI is determined by the plate making this operation. There is a standard to define its overide in eps, for an effect of paper' artistic ' enlarged rude, but forget I mentioned that, according to me.»

  Your purchase order by specifying 133lpi for uncoated offset would fall into an acceptable standard.

  A few tears do not specify the traditional model of viginette these days. forms of frequency modulated and Stochastic screening points set variables generated randomly in the hue area.

• Red hue S2340L and intertwining of the lines on the left side of the screen

  Hello

  I have been using the monitor S2340L dell for the last 4 months. Now he seems to have a reddish tint on the left side of the screen. On a thorough inspection it seems also to be interlacing of horizontal lines. These lines don't extend to whole screen however, only about 5cm from the left at the border. the rest of the function of the monitor as usual.

  I did the test, in disabling the pc and pressing the keys 1 and 4 on monitor. It's still there. Please me tips on how to get this repaired/replaced product.

  * Back to the top of this Forum to monitor
  Open the monitor "FAQ".
  * Open "monitor and safety guarantees.

• Blur Gaussian and color Hue/Saturation setting cause freeze-up

  After using PS Elements 9 for a year, he started to give me problems, and I can't find a solution for her online.  Choosing the Blur Gaussian or color - causes of setting Hue/Saturation PES 9 to freeze and stop responding.  This just started today and I'm stumped.  Some other filters stopped working, but they do not produce a freeze-up.  I did a disk cleanup and defragmentation, but I didn't something different to my computer in a long time.  I can try to uninstall/reinstall, but I'd rather not if there is a simpler solution.  I'm on a Toshiba Satelite Notebook, processor i5, Windows Home Premium 64-Bit OS.  I would appreciate any idea on this issue.

  The registered editor preferences often get corrupted. You may need to restore the preferences of the Publisher to resolve all conflicts.

  Press the Ctrl + Shift + Alt keys and simultaneously click the button Edit in the Welcome screen. The three keys to unlock and look behind the screen of welcome to close. Or press the keys while double clicking on PhotoshopElementsEditor.exe (in Program Files x86\Adobe)

  You should see a pop up box with the words: settings of items file remove Adobe Photoshop?

  Click Yes

  Then wait while the elements rebuilt preferences.

• Appeal iPhone issues 7 more

  I recently bought the new iPhone 7 more.  Not only am I having problems with the LTE service, bounce back between 3 G and no service I am now having problems with call connectivity.  When you try to make an outgoing call, I get an automatic response from my carrier (Verizon) "it's Verizon, we are unable to complete your call at this time, please turn off your phone and back and try again."

  It is a known issue with the iPhone 7 and Verizon. Supposed to be Apple and Verizon are seeking him. It has been a problem since the phone was released. Do a Google search or search here on the forums for a temporary solution but not a cure.  But basically to stop the LTE oice and data into data only in the settings.

• iPhone 6 more hang freeze issues

  My iPhone 6 more guard suspended (gel) for the past 6 months, I have to reset the whole phone sometimes up to 2 times just to get it to work again. Been a loyal (including my entire family) custome since gen 1 iPhone, iPad, mac book. Am really disappointed with the quality now. Did not bring to the service center since the first day of the problem because I thought that was just a few bugs & was sure that apple will fix it, but after many update of iOS so far, the pesisit still problem.

  iPhone is more quality I've known, hope apple can fix this problem before finally losing the most loyal customers

  Hello BennyFoo,

  Thank you for bringing your iPhone freeze questions here for Apple Support communities. I understand how it is important to have a reliable phone. I'm happy to check this with you.

  The first thing we want to make sure that all of your data on your device is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Once your data is safe, try to turn off your device, then again on the March. Sometimes, that's all that is needed for connections reset and everything working properly again. This article help from Apple will help you to do: restart your iPad, iPhone or iPod touch. If you are still having issues, try force reset then. It is designed to be used when the iPhone does not respond, and it looks to be the exact symptoms that you are experiencing right now.

  If you still experience the same problems after reboot, please try to restore your device from a backup by using this article help: restore your iPhone, iPad or iPod touch from a backup. If you don't have a current backup, please try this help article: If you can not update or restore your iPhone, iPad, or iPod touch. Please pay close attention when you get to step 4 who said "when you see the option restore or put to update, choose update. iTunes will try to reinstall iOS without erasing your data. "to get your iOS reinstalled. Test if the issue is still ongoing.

  Thanks again and have a great rest of your day.

• Pages on issues of formatting to iCloud

  Hey everybody,

  I created a document Pages using the Pages application on my macbook pro I downloaded then to iCloud Pages so that I can access it from any computer. The issue I'm having is that I formatted some of the text to have a black background and the text to yellow color. For the life of me I can't understand how to change the background color of text on the Pages of iCloud. I beginning to think that changing the background color of text just is not possible on the platform of iCloud, but wanted to put this out there just to make sure.

  I appreciate any help or clarification on this issue.

  Thank you!

  Background (highlight) text color controls are absent in the Pages for iCloud, because it is a subset of Pages for Mac.

  This has been discussed in a previous post here, not so long ago.

• External hard drive mounting issues on MacOS Sierra

  After upgrading to OS Sierra, I found that my USB3 drives, directly connected to my iMac end of 2012, turn off at startup. USB 2 disks are unaffected and connect properly. The only way to access my USB3 disks is to disconnect and reconnect every time I start the computer, then they are ok. I tried to reset the NVRAM, but it did not work. I found Os El Capitan until this issue is resolved.

  Do not mount or actually turns out always the system start? It was not clear in your subject line and content later, what was going on.

  Are they NTFS formatted drives? See the solutions frequently asked and answered forum if they are.

• TVos 10 - Apple TV 4 (Wifi issues)

  My apple TV was working until it was upgraded to the new update 10 TVos great. I reset my router and modem, reset the apple tv itself and it has restarted several times, all with the same mistake of not being able to connect to the wifi network. My iPhone and computer are connected properly, get about 40mbps is normal, and the router is in the same room. Everyone knows these issues? No luck, anyone know a fix?

  have you tried to restore the appletv? Restore your Apple TV via iTunes - Apple Support

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• How to configure automation with Apple TV, Homekit and Hue

  I have what I believe should be a viable home automation installation: a new brand (4th generation, Sept. 16) Apple TV, a hub of hue with the support of Homekit and seven lights attached via the hub.  The lights appear in the home iPad app and can be enabled or disabled here.  I can also do things with Siri on the Apple TV as "turn one room family", and have the appropriate lights.  Thus, it seems that everything works.

  BUT: when I go to the tab "Automation" in the app iPad Home, all I get is a page telling me that I should get an Apple TV to put in place of the automated activities - there is no way to actually DO something.  Am I missing something obvious?  I do this also?  Don't forget that I can control the lights in the House on the iPad, so they certainly know each other...  Thank you!

  Howdy Jim

  Looks like you are unable to configure Automation with your Apple TV. I would check that you have everything set up correctly with the steps described in this article:

  Automate and remotely to your accessories HomeKit

  If everything looks OK, then use the section 'Get help with your home hub' down. Thank you for using communities of Apple Support.

• connectivity issues mobile iPhone 7

  I have a new iPhone 7 jet black, so far I'm in love. But yesterday, I noticed an annoying problem. The phone loses the network connection (cell to the & t) and he no reconnect, it will remain just it saying no service. I have to go in airplane mode and outside to force it to look for the network connection.

  everyone knows this? and everybody understand what it could be?

  I already missed messages and a phone call. This could worsen as boring to become a problem. If anyone has any idea what this could be please give me a heads up!

  OH! Another thing I noticed, when the iPhone is connected my signal strength went from-102 to my 6 sec to-86 on my 7! Then when I am connected I am connected!

  Hello jpgraphx,

  Thank you for using communities Support from Apple. I know have a cell connection issue on your new iPhone, it's not what you expect. The good news are the following steps will help to solve your problem with loss of cellular data and see no Service and get your new iPhone works properly again.

  If you cannot connect to a cellular network or cellular data

  See you soon!

• iOS 10 questions implementation of several devices on Home App (HomeKit) for use with Hub of HUE.

  I can connect an iPhone but am unable to allow a guest or a second iPhone to the visionaries. Once I'm Setup on an iPhone, the second iPhone will not see the hub of HUE with their application to the home page. When I send an invitation for comments and they accept, they see my Home Setup, I created, but they get an error message saying ' accessories does not.

  I rest iphones and TINT Hub several times as well as home App and TINT settings. I'm still able to install one of the two iPhones at the start. The problem comes when you try to grant the second iPhone controls. I even tried to remove the TINT Apps to ensure that they do not interfere in some way. Both devices are able to use the application of COLOUR very well to control the lights, but we would like both the convience to control the lights of HUE with iPhone Control Center.

  Someone at - it stories of success with the connection of multiple devices using the Hub of HUE and Apple Home App for iOS 10 release?

  Both devices are iPhone 6 Plus running iOS 10. I have an iPad Pro available, but it is not setup for iOS 10 again or used for lighting control. The Hub of HUE is the latest model of square.

  Thank you!

  I have exactly the same problem.  My iPhone 6 s + works fine.  My children and wife iPads, iPods and phones running iOS10 are not.  They can see the app home screen and all the features of the installation.  But each device says "no response" and at the top of the page its says "no responding accessories".

  In addition, they can all use the app of Hue and set the lights very well.  However, not with Siri, but that's another question.  Once again my siri controls function very well.

  My guess is it's a bug.

• Backup issues after upgrade to iOS10

  Dear users of Apple,

  I updated my iphone 6 more yesterday with iOS 10. Phone works quite well. But I have my phone backup problems. I usually back up my phone with my iTunes Macbook (Via cable and sometimes on wifi). But after the update to iOS 10 it seems that I can't back up my phone more. I don't know the real cause of this problem.

  1. I am not able to save my iPhone via wifi data in iTunes. (Previously it was not the case).

  2. I tried to back up my phone using the cable also. Also, I pressed "Trust" this computer, but I get this error message. Please see below.

  Also, I allowed my computer by disconnecting iTunes and logging back there. And yet I have the same issues.

  "iTunes could not connect to the iPhone because an invalid response was received from the device."

  Does anyone know what this answer is invalid can be?

  Do I have to change the settings in my phone or iTunes?

  Help please!

  Thank you very much

  Deven

  Did install you the latest iTunes? iOS 10 requires iTunes 12.5.1.

  Get the latest version of iTunes - Apple Support