iOS 10 questions implementation of several devices on Home App (HomeKit) for use with Hub of HUE.

Similar Questions

• Problem burning DVDs. "Error in device - device target is not suitable for use.

  Hi all

  Initially, I had many problems with PE8. However, the update of nVidia Driver resolved most of them.

  Just thought it was important to note the success, but also failure!

  However, one problem remains. I get the following error at the level of the mark of 96% when burning. "Error in device - device target is not suitable for use. It is always the mark of 96% and the program is "[something] compilation" when this happens.

  After searching this site I noticed that the user rgferg posted a similar problem 13 days ago has been redirected to repost in a different place, but never did.

  I tried to burn a clip 1 hour 4 times and each time I chose the slowest burning speed (8 MB/s), as suggested. It seems that the lower support is a culprit, so I bought some Verbatim DVD media - R [quality] try in my optical drive SATA Phillips. I'm skeptical it will work, but nevertheless open-minded. I'll give it a whirl when my computer has stopped capturing VHS, I train.

  Whenever combustion not not the disc was ejected automatically and the burn process actually started and progresses maybe about 40% or more.

  That tells me it's a question of sharing, rather than issue a support. Somewhere on this forum, he suggested that I go through a process of 20 stages and remove/disable each piece of software that can compete with the first, among other things. IF I do this what do I burn through the outside of Adobe? What I need imgburn or whatever it was called? What happens if I like Nero? Nero 6 has worked very well for me for 3 years.

  So I am ready to uninstall my old optical drive burning software, who out there can recommend commercial software which, for them, creates a painless Adobe burning experience without errors or conflicts? Perhaps there is another solution that I've not seen on this forum?

  I am running Windows XP SP3. I have the latest nVidia drivers for my cards SLI GeForce 7600 GS. I have 3 monitors. RAID 0 SATA, 2 GB RAM, Athlon X 2 5400.

  Justin.

  Since you are apparently able to burn to a folder on your hard drive, but not directly on a DVD, the problem is most likely that another program (Nero, for example) is interfering with communications between Premiere Elements and your DVD burner. This is very common.

  Rather than fight with it, the easiest solution is simply to burn your files on your hard drive and then use Nero (or whatever your burner program) to burn the VIDEO_TS folder to a playable disc. This process takes no more time and offers a number of advantages, including the fact that he make several copies of your DVDs very easy.

• Lightroom iOS 'Save to the original' or an extension for use with iCloud photos

  Hello

  I use icloud library because I want only a library, I would like to change with Lightroom without having to save a copy/copy of each photo.

  What iOS allows replaces the original photo in the "Photos" app rather than a lot of copies.

  There are 2 ways to make this economy of Lightroom on the original, or if Lightroom was an "extension of photos.

  This does not replace the original because it can be "reversed to the original" at any time.

  ADOBE ALLOW LIGHTROOM TO HAVE THIS LEVEL OF INTEGRATION OF IOS?

  I guess that a link to the original photos in iOS 'of the photos' would be necessary so that he knows what edit relates to how original.

  so any chance of an option "replace" when recording or an extension of Lightroom?

  Hi Luke,.

  Not really sure, but this link may help: Using Adobe Lightroom with OSX Photos | Apple official support communities

  Kind regards

  Sheena

• Several devices in health App

  I had a previous smart watch that makes basic steps sleep functions and so on, I got the Apple Watch Sunday it paired no problem. When I went into the app of health devices he said sharing information with "Misfit" but the icon wasn't there. This is the app that makes the previous stuff. I finally got the removal off the coast. by re downloaded the application. After being downloaded I deleted the application and also delete said all it data... Then, I was on the phone with most Advisor 'senior' bonehead. I followed what they told me to do and now I got 4 apple watches... The problem is every time he pairs re it self he bears the same name, so I understand that it is and put it on the top of the list for the heart rate of sleep, markets and what ever it monitors. There must be a way to remove the old appliances. I even deleted all the stuff of health from the beginning of time. Still, these 4 devices display

  Hello

  It is not currently possible to change the name of the listed such shows in the application of health.

  If you are happy to lose all the data stored by the application of health on your iPhone (including information on the activities, achievements and training data) - and also lost other sensitive data on your iPhone, including the HomeKit saved passwords and settings Wi - Fi data - then you can remove all the 'previous versions' of your app as follows health watch :

  • Cancel the pairing of your watch (when not matched with the watch app, it automatically takes a backup of your watch):
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
  • Backup your iPhone to iTunes as an encrypted backup of the United Nations(make sure the option to "Encrypt iPhone backup" is not selected / checked):
    • It's only possible via iTunes, like iCloud backups are encrypted as standard.
  • Erase content and settings on your iPhone:
    • On your iPhone: settings > general > reset > erase all content and settings.
  • Restore your iPhone from the encrypted backup of the United Nations:
    • Restore your device from an iCloud or iTunes backup - Apple Support
  • Re-pair your Apple Watch, choosing backup restore when offered the option during the set:
    • Set up your Apple Watch - Apple Support

  To repeat: this will result in the permanent loss of all accumulated data of activity and health from all sources.

  You will also need to add the cards to Apple pay on both devices.

  More information:

  https://www.Apple.com/UK/support/iPhone/backup/

  On safeguards encrypted in iTunes - Apple Support

• Language settings in device disobeys blackBerry App World for BlackBerry

  My copy of BlackBerry World plays smart and poster Indonesian while I explicitly specify English as my language in the settings of the device. Even worse is the fact that it is incomplete: there is always English phrases left in BlackBerry World here and there.

  Is there a way to force the BlackBerry World not trying to display a language he thinks I need and it displays the language I want to rather?

  Hello Raestloz,

  Thank you for your question about the language settings in the world of BlackBerry.

  To fix this complete the steps described below:

  1. Close BlackBerry World
  2. View the settings on the BlackBerry
  3. Select a language and entry
  4. Change the display language of English UK
  5. launch the BlackBerry World
  6. Confirm that the BlackBerry World now displays in English
  7. View the settings on the BlackBerry
  8. Select a language and entry
  9. Change the display in English language
  10. Open BlackBerry World
  11. Verify that the BlackBerry World is still listed as being in English

  Let us know if that helps.

• SDM version for use with the IOS 15

  Does anyone know what version of SDM is used for IOS version 15? The latest version for download is version 2.5. Release notes for version 2.5 shows only support for the version of IOS 12.x.

  In addition, no one knows if there is a packet capture Wizard in the SDM that supports IOS 15, as it is in the ASA 8.x ASDM?

  Thank you

  Mark

  I think that SDM is a dead product.

  You are in theory supposed to use Cisco Configuration Professional now: http://www.cisco.com/en/US/products/ps9422/index.html

  It is free to download.

  HTH

• Questions about the configuration of the cache for use with partitioned off-lot...

  Once more, I give it a try to see if we can make use of the new partitioned (split) off-heap storage and are having problems with the configuration of the cache (including configuration files).
  
  The problems that I had, it seems that < high > units should be specified for the entire cluster (or perhaps for a node? not sure yet!) while < original-size > & < size > is specified by partition. Is this correct? That's the way it was intended (for me it would have seemed more logical to also specify < high-units > per partition since I guess overflow checking and expulsion is made by partition)? The way I read the documentation, it seems that all three should be per partition if < partitioned > true < / partitioned > is specified.
  If I value < > 1 mb high-units (as i belive I should if it was per partition) I get the impression that I posted in a previous question (a message to info on some missing index data, then the crash of nodes in cluster with some of out of memory error).
  
  / Magnus
  

  <?xml version="1.0"?>
  <!DOCTYPE cache-config SYSTEM "cache-config.dtd">
  
  <cache-config>
      <caching-scheme-mapping>
          <cache-mapping>
              <cache-name>ObjCache</cache-name>
              <scheme-name>off-heap-near</scheme-name>
              <init-params>
                  <init-param>
                      <param-name>front-size</param-name>
                      <param-value>200000</param-value>
                  </init-param>
              </init-params>
          </cache-mapping>
      </caching-scheme-mapping>
  
      <caching-schemes>
          <near-scheme>
              <scheme-name>off-heap-near</scheme-name>
              <front-scheme>
                  <local-scheme>
                      <high-units>{front-size}</high-units>
                  </local-scheme>
              </front-scheme>
              <back-scheme>
                  <distributed-scheme>
                      <service-name>PartitionedOffHeap</service-name>
                      <backup-count>1</backup-count>
                      <thread-count>4</thread-count>
                      <partition-count>127</partition-count>
                      <backing-map-scheme>
                                <partitioned>true</partitioned>
                            <external-scheme>
                                  <nio-memory-manager>
                                     <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                                     <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                                  </nio-memory-manager>
                                  <unit-calculator>BINARY</unit-calculator>
                                  <high-units>127m</high-units> <!-- PER PARTITION/NODE/CLUSTER?????? -->
                           </external-scheme>
                      </backing-map-scheme>
                      <backup-storage>
                      <!-- PARTITIONED BY DEFAULT?! -->
                          <type>off-heap</type>     
                      <initial-size>1m</initial-size> <!-- PER PARTITION?! -->
                      <maximum-size>1m</maximum-size> <!-- PER PARTITION?! -->
                      </backup-storage>
                      <autostart>true</autostart>
                  </distributed-scheme>
              </back-scheme>
              <autostart>true</autostart>
          </near-scheme>
      </caching-schemes>
  </cache-config>

  Sorry, my description is very confusing. High units is by cache. What I was trying to say, is that cache mapping can train additional units high to affect the memory required by the node. Since multiple caches can map to the same pattern, especially if you use wildcards in the mapping, you must consider the total number of hidden units of high times. It is true or not caches use different services.

  You are also right about high units, applying to the partitioned support cards. You could have easily expulsion are happening as you describe. We must take another look at the configuration because it is too easy to make a mistake.

  As expected, the allocation of card support splitting is lazy to avoid the problem you described. The worst case situation, I was trying to explain can occur if you have caused all buffers to be allocated based on the data before all other nodes could take some of the partitions.

  Kind regards

  David

• A bought with my Dell XP disc may be updated or replaced for use with an HP or a similar device?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  In a Word, no. If you find my answer helpful, please click the button "Vote as helpful"! Thank you!
  My Windows Blog

• LaserJet pro M201-M202dw: I can implement a Lasrejet pro M201-M202dw for use with wireless and USB

  How can I set up my Pro M201-M202dw of Lasrejet to be accessible via the USB connection or wireless

  Hello @datfr

  Thanks for posting on the HP Forums!

  I should be able to provide assistance. If your LaserJet is already configured on the wireless network and added to the computer, then all you need to do is plug the USB cable into the computer too.  If the printer is not WiFi yet ensure that USB is not connected and run Setup wireless for printers.  Here is a link about the Configuration the printer to a wireless or wired network for the HP LaserJet Pro M201 and M202 Printer series.

  Let me know how it goes!

• Question on BB to tools for use with Eclipse

  Hello

  I m new BB Apps development... Im trying to develop applications of BB by eclipse and I need advice. I installed Eclipse 3.4.2. While I'm looking for the tools to use BB, I found the following available on different sites - I'm confused about which of these i should I use with Eclipse for development. Could someone briefly explain where each of these tools are used during the development with eclipse? Thank you

  (1) BB Plugin

  (2) BB JDE 4.3.0

  (3) pack of BB JDE component - 4.3.0

  (4) eclipse Software Update for the BB JDE v4.3 component Pack

  The 4.5 refers to the component pack version. If you expand to 4.3, then you need get the 4.3 component pack and install it as well. Go to the page that I provided above and download the pack of item 4.3 in the list of downloads (near the bottom of the page).

  Once installed with eclipse, you need to configure your plugin BlackBerry current to use the 4.3 API, simulators, etc... Window-> Preferences-> BlackBerry JDE

• What device drivers OR are required to use the configurator with CompactRIO Profibus Master-Slave device?

  I'm trying to deploy the software driver for a portable production that will allow technicians to download configurations of profibus for CompactRIO profibus DP master-slave cards.  I know I need support VISA and MAX in order to communicate with the device when it is in Slot 1.

  I have a Windows XP computer I've used in the past for this and a 7 32-bit Windows development machine that can do as well.  I guess I would need OR-Rio installed and more MAX and VISA, but I run in RIO the right software to install on this machine.  Until I dig a hole more far than necessary can someone point me in the right direction of what is needed to install?

  My development platform is LabVIEW 2010 with SP1.  The development and the production laptop computer work all the two 32-bit Windows 7.  The development machine has the following (and other) software:

  LabVIEW 2010 (RT, FPGA modules) SP1

  MAX 5.3.3

  NI-VISA 5.2

  NOR-RIO 3.6

  We use Comsoft Configurator II 1.2.37

  All reviews are much appreciated!

  Matt,

  I understand the suggestion about Profibus shake appeal reviewer, but I never mentioned the module Profibus - only the NI Compact RIO driver software.

  Ryan,

  I checked that the key and it is present and correct.  Later during some additional tests, I'm done with several other installers throw similar messages.  I've seen CVIRTEDIR and MAXAFWDIR as well.

  I thought at this stage there was another really obscure registry entry who standing things upwards, so I tried to install it (s) even on another unit of the same configuration management.  Installed LabVIEW Runtime Engine 2010 SP1f5, NI-VISA 5.2 (included OR MAX 5.3) and NOR-RIO 3.6.1 and everything works well for use with Configurator II Version 1.2 (September 2011 version 1.09 interface Comsoft TCP sockets, includes LabVIEW 8.6 run time engine).

  In the past I could have resorted to the use of MSI-Blast to clean all the related registry NOR entered, but I couldn't get my hands on a copy and uninstall NOR has not removed the remains (it seems).

  Jason

• 8.4 uConnect system &amp; iOS 10 questions!

  Help!

  I have a Jeep Cherokee from 2016 and uConnect 8.4 (update to the latest firmware). Since I updated my phone to iOS 10, when connected via USB, my music didn't play through the stereo.

  Here is a break down of the issues:

  Audio is no longer play through stereo system

  So, it's a biggie. He no longer plays music via USB. The biggest problem is when I plug it via USB, it starts to play the audio through my phone, not through the stereo. In the Middle option to choose a different output shows that "iPhone", not "uConnect" on the phone. The reason why I know it's supposed to say uConnect is because when I plug, uConnect is here for just a second, then he just disappears and goes to the iPhone. I can control the music through my steering wheel and other buttons in the car, but he plays just the external speaker on the iPhone, not the stereo music. I guess that's definitely a software problem that must be fixed as soon as POSSIBLE!

  Start with associate whenever I plug in my current reading list who played previously in force

  Another question, I've had (even with iOS 9) has every time I plugged my phone, it would leave my playlist on the phone and play the first track of global music (and not in a playlist). This really * whenever I plug the phone in my car, he kills here where I already left with a song.

  Siri suspended and does not not after talking

  If the uConnect system Siri resulted, however, when you talk to Siri and you talk is no longer, it's not the output answer sound indicating that she has taken in your speech. Only, it of there and does nothing. So I've never been able to use Siri in my car yet. This happened also with iOS 9.

  I hope to have an answer to these questions, I have. It really *. Painfully, I'm waiting for the update of CarPlay or release to the uConnect as soon as POSSIBLE, so I can stop using their antiquated terrible system!

  I sincerely hope that my first question on audio plays is not on my stereo gets fixed as soon as POSSIBLE!

  Anyone else have these problems?

  Sincerely,

  -Adam J.

  Hi aJauhari,

  Please use the Apple Support communities to post your question. It seems so that updated your iPhone to iOS 10 you lost the ability to play your music through uConnect in your Jeep Cherokee from 2016. I understand how important to get this fixed up is to you. Please, try the procedure described in the following link. Help to connect your iPhone, iPad or iPod touch with your car radio

  You can also visit the Support page uConnect for assistance with the stereo of the Jeep. Jeep® Support

  If CarPlay is not yet available in your Jeep and you can always not the USB function works with the uConnect system, try to connect your iPhone to the car sound system via Bluetooth.
  This should have you listen to your tunes in your trip again in no time!

  Good day.

• Several devices on Stream 8 Bluetooth pairing

  Hello

  I just wanted to know if its possible to pair 2 or several devices such as the mouse Bluetooth and a Bluetooth keyboard on stream 8 and simultameously work on both?

  Kind regards

  Hrishikesh

  Hello

  Keyboard and mouse Bluetooth Bluetooth work wonder, at the same time.

  I have HP Bluetooth keyboard T800 paired with 8 HP flow, just got one case iBall mouse tried bluetooth pairing with 8 Stream and here we go!

  Keyboard and mouse are paired and works like charm.

  More importantly, I have my free to load usb microphone, USB key, etc..

  Almost want to mini computer, mouse and keyboard, extremely portable and easy to carry.

  Kind regards

  Hrishikesh.

• Factory recovery finished, now several devices in system without driver

  Hello! I have a desktop HP Pavilion p7 - 1236 s with Windows 7 Home Premium x 64. I got the factory settings last night using recovery discs HP bought for my specific model. I have not installed/uninstalled all programs, drivers, etc., and now, Device Manager lists several devices of system without a driver.  The list includes: 2nd generation Intel Core processor to DRAM Controller-0100; direct memory access controller; high precision event timer. Intel 6 series/C200 Series Chipset Family SMBus Controller - 1 22; 5 instances of resources of the mother; digital data processor; programmable interrupt controller; 2 instances of card system; and the system clock. Before you recover my system last night, I had uninstalled the Intel RST 11.0.0.1032 program version. I have a single 1 terabyte hard drive (no RAID) and use the computer for my home-based business, and I had read elsewhere that it is not necessary for such a situation. Following this recovery, I see that the pilot in the path: C:\SWSETUP\DRV\Storage\Intel\RST\11.0.0.1032; However, the program is not in the programs of the devices & or Device Manager. -What is originally is current driver problems? I'd be VERY happy any idea that you could provide. Thank you!

  pammywammyv

  You are the very welcome, Pam.

  I hope HP will do a great job, fixing the problem.

• Pair several devices on the same COM Port that use the stack for windows by toshiba bluetooth?

  I have several instances of the same device...

  I wish that they all use the same COM Port when connecting to my Toughbook.
  The application that will receive data from these devices will only monitor a single COM Port assigned to.

  I have only one active connection both for couples... That's why Ifeel, this should be possible.

  Any help would be greatly appreciated

  Thank you

  Hello

  Please contact the Microsoft Community Forums. I understand you want to pair multiple devices on the same COM Port using Bluetooth.

  Unfortunately, it is impossible to pair multiple devices on the same COM Port using Bluetooth as it is by design.

  With the help of Windows-related issues feel free to post on the Forums of community of Microsoft, we will be happy to help you.

  Thank you.