Safari slow after upgrade of the El Capitan, Hideme install

Similar Questions

• Safari slow after update to the last El Capitan

  Hello!

  After the last update El Capitan (April 16), Safari has been slow. For example, goes from one URL to another usually take one or two seconds and takes up to 15 seconds. First of all, I thought that my cable provider was the culprit but then I tried a different browser (Firefox) and it is never slow, even if Safari is still waiting to load a page.

  I also noticed that nsurlstoraged in the activity monitor is consuming a lot of CPU when I'm under Safari, but not when I'm in Firefox.

  I tried to disable all extensions in Safari as well as connection points disabling (where there is a conflict somewhere), but it does not solve the problem.

  I really prefer Safari on Firefox, but for now I need to run Firefox just to get the work done.

  Any thoughts on where to go from here?

  Thanks in advance for your help.

  Armand

  Troubleshoot the Safari plug-ins... (not the same as Extensions)

  Go to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.

  If it does not help the process of nsurlstoraged, try resetting the SMC as mentioned in a similar discussion here > CPU Load from NSURLSTORAGED

• Battery life after upgrade of the El Capitan is very bad

  Since the upgrade to El Capitan, it seems that my battery drains quite quickly.  Here is my EtreCheck report.  Please advise on what I need to do to get back to normal.  Thank you

  EtreCheck version: 2.6.6 (226)

  Report generated on 05/01/16 15:03

  Time 03:14

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook (13 inch, late 2009)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook - model: MacBook6, 1

  1 2.26 GHz Intel Core 2 Duo CPU: 2 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 1286 - SN = W000881YP9X7A

  Video information: (Does that mean?)

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - time since started: about one day

  Disc information: (Does that mean?)

  TOSHIBA MK2555GSXF disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Swope MacBook (disk0s2) /: go-go 249,20 (97.27) free

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-898)

  USB information: (Does that mean?)

  Built-in ISight from Apple Inc..

  Apple Inc. Apple keyboard / Trackpad

  Microsoft microsoft¬ae Nano Transceiver v1.0

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Configuration files: (Does that mean?)

  / etc/sudoers, 1242 but file size expected 2299

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / Library/Application Support/MacKeeper/AntiVirus.app

  net.kromtech.kext.AVKauth [no charge] (2.3.9 - 10.10 SDK) [click for support]

  net.kromtech.kext.Firewall [no charge] (2.3.9 - 10.10 SDK) [click for support]

  / Library/Application Support/Roxio

  [no charge] com.roxio.TDIXController (1.2) [click for support]

  / System/Library/Extensions

  [no charge] com.leapfrog.driver.LfConnectDriver (1.0.1) [click for support]

  [no charge] com.ragingmenace.driver.SideTrack (1.6) [click for support]

  Launch officers: (Does that mean?)

  [loading] com.google.keystone.agent.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [loading] com.leapfrog.connect.shell.plist [click to support]

  [operation] com.mackeeper.AntiVirus.plist [click to support]

  [operation] com.mackeeper.MacKeeper.plugin.AntiTheft.daemon.plist [click to support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist [click to support]

  [operation] com.ragingmenace.SideTrack.Daemon.plist [click to support]

  User launch officers: (Does that mean?)

  [operation] com.mackeeper.MacKeeper.Helper.plist [click to support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist [click to support]

  Items in user login: (Does that mean?)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

  Other applications: (Does that mean?)

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000006.MemoryKeeper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.EtreCheck

  [ongoing] com.fitbit.GalileoMenubar.189152

  com.mackeeper.MacKeeper.service.clean [loading]

  [ongoing] com.macpaw.CleanMyMac3.Menu.11232

  net.kromtech.MemoryKeeper.60832 [loading]

  net.kromtech.MemoryKeeper.Launcher [loading]

  Plug-ins Internet: (Does that mean?)

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Silverlight: Version: 4.0.50917.0 [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  iPhotoPhotocast: Version: 7.0

  Center photo Plugin: Version: Photo Center Plugin 1.1.2.2 [click for support]

  GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.11 check the version of the SDK

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  Safari extensions: (Does that mean?)

  Adblock more

  3rd party preference panes: (Does that mean?)

  Application Enhancer

  Flash Player [click for support]

  SideTrack [click for support]

  Time Machine: (Does that mean?)

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Swope MacBook: Disc size: 249,20 GB disc used: 151,93 GB

  Destinations:

  Backup [Local]

  Total size: 499,76 GB

  Total number of backups: 27

  An older backup: 01/15/13, 23:03

  Last backup: 12/19/15, 03:12

  Size of backup drive: adequate

  Backup size GB 499,76 > (disc 151,93 GB X 3)

  Top of page process CPU: (Does that mean?)

  6% WindowServer

  kernel_task 2%

  0% fontd

  0% CleanMyMac 3 Menu

  0% MemoryKeeper

  Top of page process of memory: (Does that mean?)

  670 MB kernel_task

  442 MB softwareupdated

  Safari of 328 MB

  311 MB AntiVirus

  213 MB com.apple.WebKit.WebContent

  Virtual memory information: (Does that mean?)

  439 MB of free RAM

  7.82 GB used RAM (3.70 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  4 January 2016, 18:49:41 self-test - spent

  If you read the report you notice there is nothing on the battery. Do not post these reports unless you have been asked to do or have a problem identified in the report for which you need assistance.

  Your battery information is reported in the power section of the information system located in your Utilities folder. Monitor user activity to see if you can identify any process consuming a lot of time processor.

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Reinstall OS X or do run these items:

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• Bootcamp problem after upgrade of the El Capitan!

  Hello

  I just upgraded to El Capitan Yosemite on my iMac, so I can't find my bootcamp. I tried to do with lonely T instructions, but yet, I think I did something wrong (not very tech savvy just follow the instructions). Bootcamp volume appears in the finder and accessible but non-startup disk. Protection of the integrity of the system has been disable by running csrutil the command disable on recovery mode. I need help!

  additional notes: I have an extra partition named Extra, and I went through the same process using gdisk when I added the partition when using Yosemite. He works at this time, but not now after El Capitan upgrade.

  And I realize that I don't have "No CoreStorage groups of logical volumes found".

  

  Not sure if necessary additional info:

  

  

  Thanks in advance, please guide me in the process.

  Derrick

  Please enter 'p' to the list of files in the last Data MS and after the release. What does the 'Extra' on your Mac partition? Do you have 'lost' Windows when you created "Extra"?

• Xperia double Z3, slow after upgrade to the marshmallow

  My double z3 updated last night (~ 1 GB throughout the app 'software update'), but it slows down the passage of open applications, view contacts, view the settings and just about anywhere you can think of a phone.

  I update another double of z3 and everything is OK? No! This is the best, with numerous app I have on it.
  Viva Sony

• After upgradeing to the 8 elements is 13 elements safe to uninstall elements 8

  After upgradeing to the 8 elements 13 elements is it save to uninstall elements 8?

  Hi Robin,

  If you do not want to use the Version 8 more and moved to 13; You can go ahead and uninstall it.

  Reference: uninstall | Adobe Premiere Elements | Photoshop Elements

  Kind regards

  Sheena

• computer "bug" after "acceptor of the license agreement" when installing Elements 6, IMAC.

  computer "bug" after "acceptor of the license agreement" when installing Elements 6, IMAC.

  Are Harley94140 you face to difficulties to accept the license agreement?  What version of Mac OS are you using on your iMac?

• How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  How install and run Acrobat Pro after having downloaded the trial without checking 'install '?

  You can not.  You must check 'install' to install and run it.

• Safari not updated with the upgrade of the El Capitan

  I have an older iMAC which has been upgraded to El Capitan (10.11.6), but Safari is still the 9.1.2.  How to upgrade to Safari?

  You use the latest version of Safari.

  (144251)

• FF gets Veery slow after upgrade from 3.6.28 to everything including the later version 12

  Removal, reboot and reinstall 3.6.28 solves the problem. The slowness is expressed during the change of pages and/or srolling.
  The computer is lightweight Vaio VPCX11S1E w / SSD 128 GB, 2 GB of RAM, Awast antivirus and firewall Zone Alarm.
  No private plugins have been nsntalled

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can turn off this add-on and report the problem to the developer of this - on Add.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• My computer is VERY slow after upgrade to El Capitan, and especially after I have downloaded MS Office 2016

  After that I downloaded El Capitan, I was satisfied with the content and the speed for about a week. I did a clean install... After 2 weeks of use, I bought the MS Office 2016 and I think after that, I noticed a significant decrease in performance. I mean, like one where I want to throw my computer out the window about 100 times a day. Takes me 30 minutes to start the computer and perform a simple task like the connection to an account on the internet and missing his shot something. 30 minutes! A task that should take 30 seconds.

  I don't know where is the problem. I have a late 2008 Macbook Alu 2.4 GHz, 8 GB Ram, disk SSD (130 GB of free space) and the rest is the default value. Is there a solution, suggestion? Is it fair that my computer can't take El Capitan even with the plug I have, or are at - it something else?

  Thank you that I advance for any help, I'm desperate with her...

  AB

  look at the following link-

  https://discussions.Apple.com/message/29099604#29099604

• IPad that two is running SLOW after upgrade to iOS 9.2? Also closes apps unexpectedly. All of the available fixes or should I try to install an OS earlier? Thanks Wes

  Im running an iPad 2 # A1396 with iOS 9.2. I noticed a significant drop in speed and some quite unexpected apps. My wifi speed is 15mbs down and 2 upwards. Older versions of iOS ran much faster and are more stable. I rebooted several times with no improvement. I have exceeded my ability of processors A5?

  Unfortunately, the installation of an earlier version of iOS is not possible. You can try to reset the iPad, but I doubt that that would solve the problem. It appears that he will soon upgrade to the iPad

• Time Machine extremely slow after upgrade to El Cap

  Time Machine problem with upgrade to Yosemite to El Cap on a laptop MBPr 15 "mid-2012.

  Time Machine backup plan: by wifi or LAN cable for two different hard disks attached to a Mac Mini that is on the local network. Two USB mini drives would serve as a backup for a total of 4 Mac disks at home.

  Behavior of Time Machine in Yosemite: dead normal. Backups were fast (10 Mbit/s in wifi, 80 MB/s when I plugged the MBPr on my LAN using a bolt of lightning for the Ethernet card.) Restored backups (I test them sometimes) fine.

  I upgraded yesterday to El Capitan. Behavior of the time Machine now: excruciatingly slow. All the steps (preparation, backup, cleanup) takes hours. My laptop was connected to the wired LAN for 9 hours now and is only 1.26 GB thanks to a backup of 3.82 GB. Speed (from MenuMeters) is under 10 KB/sec - Yes, it is * kilogram * bytes/s.

  Speed of transfer of files between the two machines via drag & drop is very good, ~80MB/sec both on the LAN, about 12 MB/s in wifi. Laptop computer interacts with the web at normal speeds. It does not appear that Time Machine, which is watered, and only on my laptop of Capitaned newly-El. My other domestic machines (all on Yosemite still) back up normally.

  I tried:

  -power / reboot both machines.

  -power / restart the LAN together.

  -cycle Time Machine power switch in the Prefs system.

  -Remove the two drives as backup targets TM laptop, then re - specify with preferences TM;

  -other things that I found through the search for this problem.

  It is a common problem in judging by the many valuation model who met it. I searched a lot and found nothing that helped me.

  I can't work without a viable backup. For now, I use Carbon Copy Cloner to duplicate my SSD MBPr for an external hard drive. Not really satisfying.

  Did someone solved this problem? Can someone tell me or suggest a solution? Thank you very much!

  Please make a copy of test in the Finder of the source for the backup volume. Is it too slow? Delete the files copied from the backup volume after the test.

• Is upgrading to the El Capitan crash Server Apple Application?

  Only Mini server - crash Server Application after an upgrade to El Capitan, or it doesn't work until a patch is installed?

  My experience is that the upgrade using the App store of 10.10.5 for a running Server 5.0.15 smoothly by stopping the server, and then performing the upgrade. You must then open the.app and he made some kind of update and then starts with the previous services and settings as they were. At this point, that I reboot, no particular reason, it seems just too good to be true.

  C.

• Canon CanoScan LIDE 200 scanner not more known with the upgrade of the El Capitan

  Using my scanner USB Canon CanoScan LIDE 200 throughout the years that

  camera seems to no longer work after upgrading to El Capitan.

  The USB device ID is:

  Bus device 250 007: ID 04 a 9:1905 Canon, Inc. CanoScan LiDE 200

  
  

  What can I do to re - activate this device?

  Thanks for any help!

  Greetings

  ULI, DF4IAH

  Try VueScan http://www.hamrick.com/