Similar Questions

• Safari slow after upgrade of the El Capitan, Hideme install

  Why is Safari slow after El Capitan upgraded, or would it be Hideme

  You described your own next troubleshooting step.  Disable your proxy/VPN for a direct connection to the Internet through your ISP and see if your slow disappears.

• K3 Note Wifi problem after upgrade to the marshmallow

  Guys, after upgradation of Marshmallow in k3 note, there arise a problem of wifi, it just dropeout every minute like connect for 1-2 seconds and disconnect then automatic...
  If someone knows how to fix this please tell me... I have hard reset my phone but the problem is not solved... so please tell me the solution

  Note from the admin; phone added to the subject type

  
  

• Z3 messaging, contacts, system settings and more unresponsive after upgrade to the marshmallow

  most of my function of system such as e-mail, contacts, settings storage system no longer works when I just have to upgrade to Android Marshmallow.

  @Hippopothomas

  If you updated over the old system, I suggest you to back up your important data and run a repair using PC Companion software.

• After upgradeing to the 8 elements is 13 elements safe to uninstall elements 8

  After upgradeing to the 8 elements 13 elements is it save to uninstall elements 8?

  Hi Robin,

  If you do not want to use the Version 8 more and moved to 13; You can go ahead and uninstall it.

  Reference: uninstall | Adobe Premiere Elements | Photoshop Elements

  Kind regards

  Sheena

• FF gets Veery slow after upgrade from 3.6.28 to everything including the later version 12

  Removal, reboot and reinstall 3.6.28 solves the problem. The slowness is expressed during the change of pages and/or srolling.
  The computer is lightweight Vaio VPCX11S1E w / SSD 128 GB, 2 GB of RAM, Awast antivirus and firewall Zone Alarm.
  No private plugins have been nsntalled

  Try to start Firefox in safe mode. This mode disables all extensions, customizations, hardware acceleration, etc., temporarily for the diagnosis and troubleshooting. If Firefox works fine in Safe Mode, then it is probably a problem with the add-on. Restart Firefox in normal mode, and then type "subject: addons" (without the quotes) in the address bar. Disable your extensions, restart Firefox between each one, until you find the troublemaker. Once you do, you can turn off this add-on and report the problem to the developer of this - on Add.

  A few other basic problems you can try things is the following:
  Run all Windows updates, install all required service packs, etc.

  Updating your graphics driver (Firefox uses the graphics card for rendering and an outdated graphics card driver can cause problems. https://support.mozilla.org/en-US/kb/how-do-i-upgrade-my-graphics-drivers.

  Update all of your plugins (Flash, Java, etc.): http://www.mozilla.org/plugincheck/.

  Download and install MalwareBytes Anti-Malware, run a full scan. http://www.malwarebytes.org/. This check allows that there is no virus on your computer, causing problems. You can uninstall this program after having cleaned the infections.

• IPad that two is running SLOW after upgrade to iOS 9.2? Also closes apps unexpectedly. All of the available fixes or should I try to install an OS earlier? Thanks Wes

  Im running an iPad 2 # A1396 with iOS 9.2. I noticed a significant drop in speed and some quite unexpected apps. My wifi speed is 15mbs down and 2 upwards. Older versions of iOS ran much faster and are more stable. I rebooted several times with no improvement. I have exceeded my ability of processors A5?

  Unfortunately, the installation of an earlier version of iOS is not possible. You can try to reset the iPad, but I doubt that that would solve the problem. It appears that he will soon upgrade to the iPad

• Internet slow after upgrade to 8.1

  I upgraded the OS on my laptop dv-7-7240 HP Envy today from 8 to 8.1 Windows (64-bit), which included 11 Explorer. He went pretty much as expected and everything worked fine except my speed of web slowed to a crawl.    I have disabled all add-ons and reset the Explorer, but that did not help.  Note: I was living slow internet (I'm on cable, by the way) and some other questions that I could not resolved, the main reason I upgraded to 8.1. It resoloved all issues except for the slow internet. Any suggestions would be greatly appreciated. Thank you!

  Yes, the problem started then on Windows 8 and continued after the upgrade to Windows 8.1. However, I have since solved the problem, but I'm a little embarrassed to tell how.  After going around the world to try to solve this problem, the solution was right in front of me all the time... the stupid cable modem.  Finally, I noticed that the light on my modem (which is quite old, by the way), were flashes more quickly than they normally.  A call to technical support to my cable company confirmed that I probably have a defective modem. So, I installed a modem new, thinner, and now I am again crusing the net like a champ. The lesson: If your modem is more than five years, beware; they do not last forever. Lesson learned!

  Thank you!

• Date / time error on the SPA3102 after upgrade to the SW version: 5.1.7 (GW)

  After the upgrade of the software of the date and time of my SPA is taped:

  Current time: 01/01/2003 12:10:11

  and therefore can not save. I tried to change to multiple NTP IE: time.nist.gov or ntp.sipgate.net but nothing gives.

  Anu suggestions how to solve this problem?

  Make sure that the machine is on the internet or that he makes the DNS server addresses.

  You can also try to point to an IP address of the local computer to use his time.

• WTR320N still slow after upgrade

  Today, I upgraded my LAN 10/100mbps to 100/1000 Mbps Wireless LAN using the Linksys WTR320N with. The initial tests took place without problems. The small local network set up with 2 laptops, router and modem worked well and I plugged in the other systems.

  During the test, the speed of the internet was as before, instantaneous loading of most of the pages (Facebook, Youtube, etc.) and reaches the maximum capable speed, which is 23MBps with a low ping about 30.

  Now, with the entire network, the internetspeed is not top 20MBps more, it sticks to 15-17, which is a loss of 6 Mbps on my connection. After checking on various topics on other forums, I upgraded the firmware of 1.0.0.3 for 1.0.0.4. Who gave a small improvement, but I can't yet reach my speed max, neither a decent ping and pageload time.

  I'm a cable internet provider that requires no password/username to log, so it is a permanent connection. MTU is 1500, and because I don't know what it is (I've seen the expression and change it to 1300/1350. a few times looking for a solution).

  No idea how I can speed up the loadtimes and the internetspeed?

  [EDIT] problems are both on cable in Wi - Fi. The signal strength of the wireless is maximum and never given wired connections problems before.

  Change the MTU to 1365.

  You have already updated the Firmware of the router.

  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure the router.

  Press and hold the reset button on the router for 30 seconds. Release the reset and wait for 10 seconds. Power cycle the router and reconfigure the router.

• Scan C5180 not working after upgrade of the mavericks

  After upgrading my Macbook Air to the operating system of Mavericks, my software of scan C5180 does not include the overview / dots a longer selection.  These are the points that allow you to select only part of the image of bed scanner for treatment.

  The scanner / printer software has been updated by the o/s update Lion to the Mavericks.

  MacBook Air does not include a CD option, so I can't go back to the original driver.

  Thanks, but none of it helped.

  I got running again by installing an older driver from a site "archived drivers."  And I will decrease just suggestions more Apple to upgrade a current driver for the C5180.

  Search Google proposed this solution after a number of other people had the same problem after upgrading them to the Mavericks.

  / Dual rear wheels

  I consider this matter closed.

• Problem with the rules after upgrade of the VM in foglight cartridge

  Hello

  There is a small problem with the rules after that I updated the VM cartridge level.

  In the default rules, I changed a few settings so that they will act as I need.

  However, each time I upgrade VM cartridge my rules are off and marked as backup.

  The question is: is there a way to upgrade the cartridge and keep my active rules after upgrading?

  Best regards

  Victor

  This is the normal behavior according to this KB article

  https://support.quest.com/SolutionDetail.aspx?ID=SOL105872&PR=Foglight

  105872 knowledge article

   
  • return

  • Title

    Backup rules fill in the dashboard management rule after Foglight upgraded

  • Description

    After that an upgrade of Foglight was conducted, several backup rules are created for rules that have been published before the upgrade. For example:

    Cluster VMW IO network
    Cluster VMW IO network (backup)

  • Resolution

    During the upgrade procedure, the FMS has detected that some of the original rules have been changed in some way. It copies the rules previously upgraded in backups, before trying to merge the contents of the update rule in the former.

    Assuming that the FMS works as expected, the rules of backup can be deleted. However, it is best to confirm this in the respect of the rules first before making deletions.

    When editing rules, particularly rules OOTB (out of the box), it is recommended to copy the original rule, disable the original rule and edit the copied rule. This should reduce the risk of the problem described in this Article.

  Golan

• Not be able to start DW CS4 after upgrade to the final version of Windows 10

  Dear Sirs.

  I installed DW CS4 on Windows 10 Preview Edition and it worked fine. After the upgrade to the final version of Windows 10 I'm no more able to start DW. I guess it's a problem with licensing. I just tried uninstalling and reinstalling, but is not changes anything.

  Thank you for your help... Michael

  There are some ongoing discussions about this, one of them in W10 is...

  Do a search for CMD

  The icon right-click command prompt and choose Run as administrator

  In prompt, type (make sure that space is there between sfc and /)

  sfc/scannow

  Press enter

  When finished, restart the computer and try again to DW.

• Email does not work after upgrade to the APEX

  Operating systems: Windows 2003
  DB: 11 GR 1 material
  
  E-mail no longer works for users after upgrade from 4.0 to 4.1. New APEX_040100 'main' added to the ACL as well as the main APEX_040000 of the previous version. In fact, the two still exist in the ACL.
  
  Error code in the APEX Admin Mail queue: ORA-24247: access denied by access control (ACL) of network list
  
  What could be the cause of the installation of electronic mail within the APEX to not work?
  See you soon!

  See what {message identifier: = 10355015}

• Why a sql statement has become slow after upgrade to 11g database

  Hello
  
  My previous version of the database is 9I and any sql statement are well-developed.
  but after upgrading to 11g database, a sql statement become slowly.
  
  My senior dba friend told me there are a few different calculating methods from 9i to 11g.
  is any body can explain this different methods from 9i to 11g, and what should be attention to calculate at what level 9i to 11g. I thank.
  
  Sean

  The administrator of yours is correct. What he meant, 9i, the works of the optimizer with different formulas and 11 g, there are different formulas. PS this sometimes causes when you upgrade from 9i (or even 10g too), analyze the queries that worked with RBO in 9i perfectly and used indexes, all of a sudden they stop using it because the CBO think not that this is a good choice. It would be too difficult to put formulas here by anyone, but what I can say is that to buy a book.
  http://www.Amazon.com/cost-based-Oracle-fundamentals-experts-voice/DP/1590596366

  And practice on 9i, 10g and 11g. It would say a lot of formulas used by oracle.

  HTH
  Aman...