safety notice: vulnerability of the Extensible Authentication Protocol

Similar Questions

• Toshiba Wireless Manager - not possible to choose the authentication protocol

  Hello

  I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.

  Concerning

  Post edited by: malo

  Hello

  As far as I know to create a new profile.
  Then you could add the APN, user name, password and authentication protocol
  But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocol

  Welcome them

• The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  Hello

  I use Windows 7 (32-bit) with SP1.

  Quite often (at least three times a day) I am to be locked of my PC and cannot connect to 30 mts each time. I've analyzed carefully and there is absolutely nothing wrong with my ID on the front of Windows AD or group etc. policy.

  I am getting event ID 40690 in my observer of events and here are the details...

  WARNING on 09/06/2011 09:07:54 lsasrv 40960 any

  Log name: System

  Source: lsasrv with

  Date: 09/06/2011 09:07:54

  Event ID: 40960

  Task category: no

  Level: WARNING

  Keywords:

  User: SYSTEM

  Computer: workstation.companyname.com

  Description:

  The security system detected an authentication for the HTTP/http-proxy server error - nom_societe.com. The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.

  (0xc0000234).

  I searched all possible sites and cannot find an appropriate solution.

  As it is causing a lot of inconvenience would appreciate a miracle solution as soon as POSSIBLE.

  See you soon,.

  bcshekar

  Hi bcshekar,

  The question you have posted is related to the area and would be better suited to the net Tech community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

• PAP authentication protocol

  Dear,

  When I ssh rocking the authentication protocol and authentication details in the snapshot attached, I see as a PAP_ASCII protocol that was used.

  I know that the PAP's clear password authentication protocol, so how do I justify to anyone connecting to my switch is secure.

  So the only way to access the device managed correctly is to use SSH and TELNET. from the NAS to the AAA (RADIUS) server, your password is encrypted anyway.

  You can read the discussion detailed here:

  https://supportforums.Cisco.com/discussion/12668396/does-Cisco-support-s...

  Rgds,

  Jousset

  ~ Make rate of useful messages.

• Cisco supports strong remote network authentication protocols?

  Hello world

  To the best of my knowledge IOS and IOS - XE nothing better than PAP support for authenticating users to network devices remotely. Is there a solution more concentrated than PAP, perhaps CHAP or P/EAP-based? Given the fact that OpenSSL already installed in these devices, I'm surprised that EAP-TTLS has not been adopted as a secure alternative.

  Any ideas?

  Hey Hod,

  As far as I'm concerned, I don't know of any technology readily available to protect RAY sessions between the authenticator and the RADIUS server. The need for this is may be minimized by the fact that common applications of RADIUS (i.e., PPP, 802. 1 X and wireless authentication) establish a secure channel "supplicant" - RADIUS and use EAP to carry any authentication the begging and RADIUS is supported, with the authenticator, being relegated to a minor role of reconditioning of EAP messages in pairs of RAY - V and vice versa. This whole chain carrying identification user information can be protected by TLS, the actual communication between a RADIUS server and her authenticators is not protected by itself.

  Many sources often States in a flippant remark that a VPN tunnel, such as IPsec, could be used to protect RAY sessions. It is hardly feasible, however, because many features in the role of authenticator (for example, switches) have no support for IPsec, either. It seems that RADIUS has been recently extended with TLS support - the "RadSec" is described in RFC 6614 but I've not supported by devices yet seen - honestly, I learned about this was now alone as I looking for some details during the drafting of this response.

  Protect the old RADIUS protocol is always a challenge, it would seem.

  Best regards
  Peter

• This version of 5.5 U1 is vulnerable to the software? 1892794

  Hello

  I saw that there is a patch for 5.5 U1 to HeartBleed (ESXi550-201404001), we run build 1892794.  Research on the portal of the patch, this contains the following hotfixes:

  ESXi550-201407405-BG

  KO 2077411

  Critical bug fix

  Esx-base updates

  ESXi550-201407401-BG

  KO 2077407

  Critical bug fix

  Tools-light updates

  ESXi550-201407403-BG

  KO 2077409

  Fixed an Important bug

  Misc-drivers updates

  ESXi550-201407402-BG

  KO 2077408

  Fixed an Important bug

  Megaraid sas scsi updates

  ESXi550-201407404-BG

  KO 2077410

  Fixed an Important bug

  Esx-base updates

  ESXi550-201407101-SG

  KO 2077414

  Criticism of security

  Tools-light updates

  ESXi550-201407102-SG

  2077415 KB

  Important safety

  This suggests that the patch is NOT included in this version, but I learned that some of these bugs are cumulative and include patches.  Which is correct?

  Thank you

  Hello Dan,.

  Yes VMware fixes are cumulative so with build 1892794 you are already patched for the vulnerability of the software.

  Patch ESXi550-201404001 will take you to the version 1746018 which are already on the vulnerability of HB.

  Patch ESXi550-201404020 will take you to the version 1746974 which are already on the vulnerability of HB.

  ESXi 5.5 Patch 2	2014-07-01	1892794	Ok
  ESXi 5.5 Patch Express 4	2014 06-11	1881737	Ok
  ESXi 5.5 Update 1 has	2014-04-19	1746018	Ok
  ESXi 5.5 Express Patch3	2014-04-19	1746974	Ok
  ESXi 5.5 Update 1	2014 03-11	1623387	Vulnerable

  For the latest security patches, see this article:

  VMware KB: Security of VMware connection guidelines for ESXi and ESX

  So if you want the latest patch of security (for ESXi 5.5) go to the Patch ESXi550-201410101-SG this will update only the VIB esx-base and bring your host to the build 2093874.

  Or update the image with Patch version ESXi550-201410001 (including SG above) which will bring you to the last build real 2143827. (5.5 Patch3 ESXi)

• Site ads continue to use the proxy settings and I get the message "Authentication required" time and time again. I have stop advertisements to use my proxy settings?

  I have put my school proxy settings and use them very often. On some Web sites, ads continue to use these proxy settings (probably to show me ads based on my preferences or I don't know), and I get the message "Authentication required" time and time again before the end of the loading page. It's annoying because if I have several tabs open and am currently on another page while loading the website with the ads, I'm brought back to this page to authenticate. Can I get asked 3 times to authenticate while this page loads, and it takes forever to load because of this. I don't want to disable my proxy settings because I use it very often. I tried to uncheck the "Accept cookies from Web sites" and nothing happens, it's always the same. I want these ads to stop going through my proxy settings. How do I do that?

  Hello

  You can try the add-on Adblock Plus . In addition to subscriptions, you can manually add URL patterns or click on an ad to add a filter.

  Support

• What will be the form of the file (file://) Protocol in firefox? Using file://servername/foldername, I am uable to open a folder. But she supported in other browsers. Need a quick solution to this issue.

  What will be the form of the file (file://) Protocol in firefox? Using file://servername/foldername, I am uable to open a folder. But it

  supported in other browsers. Need a quick solution to this issue.
  I used following code snippets:
  < a href = "file://PC2/c$" > open the file < /a >
  It is used to open C: /. But it does not work in other browsers except Mozilla.

  Need a solution as soon as possible...

  See also:

  • http://KB.mozillazine.org/Links_to_local_pages_do_not_work

• Internet Explore has stopped working - question of the biometric authentication service

  My Elitebook 8540p has developed a problem where I get the error message - Internet Explorer has stopped working... Turn it back on.     I am running Windows 7 32 bit.   And using IE9.

  After some internet reading, I started my services of neutralization.    I finally got down to a service that is causing the problem.

  Biometric Authentication Service Digital Persona Inc.

  When I disable the service in the services of the MSconfig System Configuration and reboot, I use internet explore without any problem.    (I've identified some Web pages which would agrivate the question.)

  The deactivation of the Service of Authenticaton of Biomitric causes the scanner to not work.     I tried to reload the driver for fingerprint reader, and the HP Protect tools Security Manager.

  Any idea how I can activate the biometric authentication Service and not IE stopped working the issue?

  j1bissig

  I had the same problem on my HP Pavilion dv7 and had the chance of getting a solution.

  I, too, put the finger on biometric authentication as the problem Service.  By disabling the service, Internet Explorer worked well; except, now, I had no finger analysis feature.  I installed the latest version and it worked for a few sessions and then the problem comes back.

  Looking at my updates, I realized that the Flash is set to update at the same time, the problem started.  I tested by activating the biometric authentication Service.  Instead, I disabled the Flash add-on in Internet Explorer and it did not work again; except, now, I had no Flash.

  Searching online, I came across this post from Adobe:

  Post on the Adobe Forum: IE9, Windows 7 64-bit Flash causes "Internet Explorer has stopped working".

  I followed the instructions in this post, including the "clean install" and reverted to version 10.3 of Flash.

  Post on the Adobe Forum: how to return to a previous version of Flash Player?

  Now, all the features work correctly.

  I hope this helps!

• VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  VISA: (Hex 0xBFFF001) timeout expired before the operation is complete. I get this error when you run a VI (instrument is set up to be controlled remotely using the TCP/IP Protocol)

  Please suggest a solution.

  Thank you very much, it worked!

• Family safety control turns off the PC?

  I installed the family security check on a PC with Windows 7. Parental control turns off the PC whene the time I have instald (while my son can use the PC) has reached?

  Best regards

  Hi Peter,.

  Currently, we don't have the option in Family Safety to shut down the computer when the time limit is reached, what we have is to disconnect the user when the deadline has been reached. Even if your child is using the computer, all activities that are conducted will be stopped when your child has been disconnected. For more information about this, please read the article in this link: how Time allocation and work of curfew?

  This feature is a great idea and would be a nice feature to have, please submit it as a request to feature by going to the page http://feedback.live.com/ and then select "Windows Live Family Safety".

  Kind regards
  Gerard G.

• My computer does not connect to the Internet. Event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."

  Hello!
  I am working on a Dell Inspiron 1300 laptop for a friend. She has Windows HP Home Edition, SP3 installed.
  He said that Saturday night he started to act funny and wouldn't connect to the Internet. There were a few popups then begins, and he did not know if they were connected to not go on the Internet.
  He had the rootkit.zeroaccess infection. I used Combofix to remove it. It won't always get on the Internet, either via a wi - fi or ethernet connection.
  Looking at the event viewer, I see event ID 7003, "the TCP/IP protocol driver service depends on the non-existent service below: IPSec."
  Then, event 7001, "(NLA) network location awareness service depends on the service protocol driver TCP/IP which could not start due to the following error: the dependency service does not exist or has been marked for deletion.".

  I copied ipsec.sys from another XP Home machine which worked and stuck in the Windows\System32\drivers directory and it still does not work.

  Any ideas are greatly appreciated!

  Dave

  Hello

  See this link:

  http://TechNet.Microsoft.com/en-us/library/cc958861.aspx

  http://www.Microsoft.com/technet/support/ee/transform.aspx?ProdName=Windows+operating+system&ProdVer=5.2&EvtID=7003&EvtSrc=Service+Control+Manager&lcid=1033

  Let us know the results.

• Linksys Smart Wi - Fi is vulnerable to the heart bleed OpenSSL

  I'm curious to know if the Linksys Smart Wi - Fi site or routers are vulnerable to the exploit of heart bleed OpenSSL?

  http://SiliconANGLE.com/blog/2014/04/08/OpenSSL-heartbleed-vulnerability-may-affect-millions/

  BTW: Change your passwords...

  FW_LICENSE_EA4500_v2.1.39.145204 - 3 - RainCAP_n.html construction

• Have recently noticed icons on the desktop "oscillate" or shake a moment; What is going on? Is this a problem?

  I recently noticed some icons on the desktop, shaking for a moment from time to time, which does not seem to be connected to everything I do. I noticed mostly with the icons for a few programs I downloaded recently (Switch Sound File Converter, WavePad Sound Editor and RecordPad sound recorder), even if I used these programs in the past without problem and did not notice anything unusual to suggest a virus. Does anyone know what this means? Thank you!

  Hello

  Step 1:

  You can try to start in safe mode and check if the problem persists. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Hope that information was useful

• the AAA authentication enable default group Ganymede + activate

  I implement CSACS 4.0. First of all on the client, I will apply aaa authenticatio / authorization under vty. The issure if I use the followin command

  the AAA authentication enable default group Ganymede + activate

  What happens if I connect via the console? I need to enter a name of user and password?

  Here is my configuration

  AAA new-model

  Group authvty of connection authentication AAA GANYMEDE + local

  the AAA authentication enable default group Ganymede + activate

  authvty orders 15 AAA authorization GANYMEDE + local

  RADIUS-server host IP

  Radius-server key

  Ganymede IP source interface VLAN 3

  AAA accounting send stop-record an authentication failure

  AAA accounting delay start

  AAA accounting exec authvty start-stop group Ganymede +.

  orders accounting AAA 15 authvty power group Ganymede +.

  AAA accounting connection authvty start-stop group Ganymede +.

  line vty 0 15

  connection of authentication authvty

  authorization orders 15 authvty

  authvty connection accounting

  accounting orders 15 authvty

  accunting exec authvty

  Any suggestion will be appreciated!

  It should work because it is a guest message.banner whenever you try to connect (console/vty). I set it up on my router.

  If you have banner motd, it will appear as well (see below). So, I have to remove it to get only the aaa banner & prompt is displayed:

  ************************************************************

  Username: cisco, password: cisco (priv 15f - local) *.

  ************************************************************

  Any unauthorized use is prohibited.

  Enter your name here: User1

  Now enter your password:

  Router #.

  The configuration more or less looks like this:

  AAA new-model

  AAA authentication banner ^ is forbidden to use CUnauthorized. ^ C

  AAA authentication password prompt "enter your password now:

  AAA-guest authentication username "enter your name here:

  Group AAA authentication login default RADIUS

  local authentication AAA CONSOLE connection

  HTH

  AK