Sam A40: dvd cd will no longer play
I get a message "format is" whenever I load a CD dvd... even bought in-store dvd will not play,... someone has any ideas
Hello
It seems that the missing codecs. Make sure you have all the necessary codecs.
If in doubt, try to download and install K-Lite codec Pack (full version or mega):
http://www.free-codecs.com/download/K_Lite_Codec_Pack.htm
Good luck!
Tags: Toshiba
Similar Questions
-
Windows Media Player will no longer play videos WVM from my local computer.
Windows Media Player will no longer play videos WVM from my local computer. It just hangs and the circle keeps going around and around. I "ve waited nine minutes and the video never played WVM. I don't get the error messages.
Consider this case closed, please.
-
computer is spit back out dvd but will keep and play the game disc
have a dell studio, he started being silly, it will read and play the game disc. partially, it reads the disks if recording information. but it wen I put it in a dvd takes it turns around inside like its gona read but it spits out back. IV run virous scans and updates and I cheak all system files and every thing seems OK Please help
Hello
Check with Dell Support, their online documentation, drivers, diagnostics and ask in their forums
on the problems known.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/----------------
Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
themselves at the start because they will be competing for resources. This does not mean that this issue has been
caused by those, however, it's a possibility depending on which and how many you have installed.You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
correctly.Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.
Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.
CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
tolerances. They may be delivered, but it is generally more economical to replace the disk.Several good info here:
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014-------------------------------------------------------------
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================================
After the foregoing:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Can't open my dvd tray &; DVD will no longer play
I have a HP Pavilion dv6810 laptop. Recently, I tried to play a dvd, but the computer does not recognize that there is a dvd inserted. I must start by saying that a few days before I tried to access a data cd, but was unable to do so. In any case, when I then tried to use the dvd player, it does not recognize that there is a dvd in the machine. Now, unfortunately, I can't not to open the dvd drawer. It is stuck and nothing I've tried will open. I tried opening outdoors also although inwardly by clicking "Eject" Quick Play. I've even tried doing lever, but he is really stuck on one end.
I don't want to have to take the machine to a repair shop. They're going to have it forever and I need for my work every day.
Any suggestions?
Hi, looks like you have a defective optical drive.
To remove media insert a paper clip in the access of the output in the control panel front of the optical drive and gently push on the paper clip until the tray is released.
-
CD will no longer play in a cd player.
Recently, I've burned audio CDs in WMP and they play in the computer, in my two dvd players connected to TV and my car stereo but won't play in my two stereo cd players. In fact, a few but they take a lot of time to "load". Others never load nor a message 'no disc '. If I try a cd burned months ago, they play as they always did without problem or delay in "loading". Obviously, the music is ON the cd, but something is at the origin of these 2 players for not being able to read or load it. I tried different cd Mfg., but which was never a problem before. It makes little difference. The worst was a Memorex color cd batch all gave a message 'no disc '. On a few of the blanks Magnavox (which ALWAYS worked very well), they will BE finally "load", but it takes a lot of time. Most will not. Yet once, I tried previously burned to the cd in the cd player 2 and they work fine. What I NOW burn, is a problem, but ONLY on 2 stereo drives cd and only with CDs burned in the last month or two. I ran the free program offered by Microsoft to correct WM, etc, but nothing has changed. I did a little at different speeds without success. Basically, I've been ripping / burning using Windows Audio at different speeds a few with no perceptible change in the results. Later I received from an expert internet the burner to computer was bad. It is relatively new and has worked very well until very recently.
Q: could it have something to do with the cd been closed properly? The cd play in my car, my computer and my dvd player if it has not been closed correctly? During the burning process, he says it closes.
Q: codec have something to do with the playback of the cd? Could they have changed during a windows update do the cd players obsolete readers?
Ed.
Hi Eddill,
What is the operating system installed on your computer?
I suggest you to refer to the section "why the disc I burned don't play in my CD player?" link and check if it helps.
Burn a CD or DVD in Windows Media Player: frequently asked questions
I hope this helps.
-
old videos will no longer play / audio codec missing
Some old videos that I no longer will play. It says I'm missing an Audio Sharp G.726 audio codec (45). I tried to download the components, but I do not know if it is applied to Windows Media Player.
Yes, I had already tried and that has done nothing, so I went to http://www.free-codecs.com/sharp_g726_audio_codec_download.htm , a site that had the missing codec and installed it. It took three tries and I had to uninstall and reistall of other codec packages I tried, then restarted after making my slow super computer and reinstall just the single missing codec and finally it worked.
-
Audiobooks from Netlibrary will no longer play
In the past, I managed to download and play 2 audio books from the media center of Netlibrary my clip. Yesterday, I tried to download another book, and he won't play at all. When I select my music and press Play, it scrolls all chapter numbers, but it will not stop on a whole chapter and play anything. I deleted the audio book and downloaded another. I had exactly the same result.
What is happening with my clip all of a sudden? This problem can be corrected?
Thank you!
In fact, I thought that my problem. I was trying to listen to mp3 instead of WMA files files. When I transferred a book in the WMA format, it works beautifully.
-
I transferred a large amount of music from my work (XP Dell) computer to my home laptop (Dell Vista) via an external hard drive. About 3/4 of the music now will not import into itunes (nothing happens at all when I try to add or drag the files on), and Windows media player will not play them. He complains about the codex or file extension. I is not the exact message at the moment but you can get it later.
The songs will play in another free player I downloaded (I don't remember who it was but can find out (I'm not on my laptop now)).
I've had this problem for a year or two and thinking of upgrading to Windows 7 just if I can access my music again, but don't know if it will even work and prefer not spend this money if there is a solution under Vista.
The files are a mixture of types, some were given to me and others that I transferred via CD myself. I have all the original CD or files. Each of them has played without problems on the XP PC. When I got this problem, I sent one of the files from my Vista computer on an XP machine and it played smoothly on this point, so it seems not that files have been corrupted. It seems to be a Vista problem that also affects good windows media player and itunes. I want to be able to get the songs in itunes, so I can listen to on my Ipod.
Any help gratefully received.Hi Rachael_964,
I suggest that you follow the section provided below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
Because of itunes, you can contact itunes support for more help and information.
-
Windows Media Player will no longer play downloaded visualizations
Recently, I had a problem range from simple annoyance to frustrating. The visualizations that I bought two (IE GE Force Aeon of spectrum) and those downloaded from Micorsoft (Album Art 3D, bubbles) will not play. It was a gradual progression, first I would like to restart and the problem seems to be resolved. Then my X 86 would not work, but would be my Media Player for 64-bit. Now they don't work at all. However, I can still see them. DLL in the list and my Alchemy, Bars and waves and the batteries still work fine (coincidentally, those working in Windows Media Center, who has never played the downloaded content - at least not on Windows 7-64 bit). I am running Windows 7 Ulitmate, service pack 1(64bit) with a card ATI 5850 vid and a Phenom II x 4 965 processor.
Hi michardav,
· Are you able to play integrated visualizations?
I suggest you run the troubleshooter in Windows Media Player and see if it helps.
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Downloaded visualizations can be corrupted, download it again and check.
-
My built in CD/DVD player will not be playing any media
My built in CD/DVD player won't play all the media, the system says that it can not detect a CD/DVD drive, I an and it is built in. Is this a problem with my driver? If so, how can I download a new driver?
My built in CD/DVD player won't play all the media, the system says that it can not detect a CD/DVD drive, I an and it is built in. Is this a problem with my driver? If so, how can I download a new driver?
====================================
The following link might be worth a visit:(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7) -
3GP video will no longer play after moving
After I move my video files 3gp from one folder to another on my laptop, the video and audio are unable to play more. The playback bar moves, but nothing shows... He played a minute ago in the folder of origin, but tried everything now, nothing works... help?
Perform control and restoration of the system.
-
The satellite A40-151 DVD player will not play DVD
Hi my dvd player will play music CDs, but when I try to play a dvd, it is simply a beep and nothing don't get going I tried windvd and it lights up, but everything is blurred and still wont read dvd
Hello
Very bad situation here! What will you do now? Replacing the drive maybe?
-
DVD player will not read is no longer drives
Recently, I went for 2 weeks - when I left my computer was working and my dvd drive could read all my disks (mainly games)
My return however (and after the installation of 18 updates last night) the bed DVD player is no longer just about any type of media disc (having already be able to read all). However, whenever I needed it for work, he did, I noticed that before I left my DVD player had played a bit and seems to be trying to read discs (making the noise of rotation).
Anyone got any ideas on what this could be and a possible fix?
(im running windows vista and the drive is a tsstcorp DVD + - RW TS - H653B ATA)
Thanks in advance
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Media Player or Media Center will not recognize DVDs, but will play CD
I've had my laptop for about a year now. The media play would play a DVD without problem. Up to what a month ago I noticed that it would take more time and more time for the Media Player play a DVD. I can't have the media to listen to anything except a CD. I noticed a rattling when I inserted the DVD. Now he not only recognise a DVD, but when I insert a DVD, nothing will happen. I tried uninstalling the driver rest nothing is that nothing happens. Do I have to replace the whole player. In Media Center, it lists a DVD as being stored in the library, I the HELP JUST DO NOT KNOW WHAT THE DEVIL IS VA ON?
ONE WITH A SOLUTION? NEED HELP.
Hi Roy,
Welcome to the Microsoft community.
Apology for a late reply.
I suggest you TURN the Windows media feature in the list of Windows features in Control Panel. Check the results. Check out the link and follow the steps to do this:
Please let us know the results.
-
Windows DVD Maker will not play on the TV DVD player
I have Windows Vista, and Windows Movie Maker to make a movie. I've published using Windows DVD Maker. I've made several copies and sent to various members of my family. While I was able to watch them when I tested them on my TV dvd player, none of my family members are able to watch their copies on their dvd players. In addition, when I insert the dvd in my computer's dvd player, it won't play either. How can I fix?
Thank you. What I did just check "ffdshow" configuration and found that the codec for mp2 was disabled, so I let him. Now when I load the dvd into my computer it starts automatically.
Now, my question is that I have to burn the new dvd for my family, so they can watch on their dvd player TV? Are their other codecs apart from that I have activated that must be adjusted so that DVDs can be found on other dvd players?
======================================
You didn't say if you have a folder VIDEO_TS on the DVD...OK... you say you can play DVDs on your freestanding
DVD player and on your computer. Startups that appears
DVDs are fine and the problems of members of your family
need to be cleared up on their end.One thing I would try would be to publish the project as a
.wmv movie file in a folder on my hard drive. Then I'd
the following freeware to create a video DVD. There are
a small chance that it would work better for you.(FWIW) It's always a good idea to create a system
Restore point before installing software or updates)DVD Flick
http://www.dvdflick.NET/Be sure to read the Guide:
http://www.dvdflick.NET/Guide.phpIf you have problems to download DVD Flick...
Try the following direct link:
http://tinyurl.com/yzx9sck
or...
http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayerSave the file to a folder on your hard drive and
install from there.Tutorials:
Tutorial DVD Flick
http://beginwithsoftware.com/videoguides/DVD-flick-Guide.htmlBurn any Format video DVD PC
http://www.freevideoworkshop.com/dvdflicktutorial.htmTo create a video DVD base that should play in a free
permanent drive DVD... try the following...First... read the DVD Flick Guide to familiarize
with the program.Open DVD Flick and insert a blank DVD in your drive.
If the window of Autorun from your computer... just close it.
Click the project settings button and check... Video /.
Target format... residents United States... Choose... NTSC /.
Accept.The title button left click Add and navigate to your
Video clips and select the ones you want on the DVD.You can have by selecting one and then use
the up and down buttons.Left click on the button create DVD / OK / Yes / Yes.
Please wait while the DVD is created.
When the text "Completed successfully" is displayed you
DVD Flick can close. Now you can eject your DVD
and play in your DVD player.At some point you might want to buy more
Advanced Cyberlink, Nero, Roxio, software
Ulead, etc... but at least it is a start.Good luck. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
Maybe you are looking for
-
To connect a Mac to a PC... editorial issues
I have an iMac (el Capitan 10.11.5) and a PC (Win 7) connected by a cable network through a router connected to the internet. I have no problem to read all files on the PC and access the internet but I can not just change, and files on the mac and th
-
Update driver graphic on Satellite L of evil
Hey, support I was installing a game when he said that I had a 'bad video driver', search for it on some forum that says I know what graphics card I had and be updated on the Web site of producers (AMD) - ATI Mobility Radeon HD 4500 Series. I have DL
-
I want to see my Firefox the way in which the video shows. Firefox TAB instead of: File, Edit, View, etc.. How can I change the view?
-
Plug loose in Satellite Pro L300
Satellite Pro L300.The power supply plug "toggle" in this position.It does not take much more. Computer never abused. My use only. 2.5 years. 5th PC toshiba laptop.Could not find anything to let me know how difficult a fix that would be. Sometimes, i
-
Tecra S1 stops when you use the Port Replicator III
Hello I ve you have a problem with a Tecra S1 Notebook and Port Replicator III. When I anchor the portable station, it turns off immediately. It doesn´t so serious I m in Windows or not. The same notebook works in a Port Replicator II without any pro