Same result for different frequencies?
Hi all
I'm new to labview and the communication kit, so I'm trying to test the examples.
When the example of 'Rx Continuous Sync or Async' opening and it works I get the same output on the "power spectrum".
i'm checking different frequencies in the range of 1.2 GHz to 6 GHz.
How is it possible then that there is nothing transmitted? -> checking with the android application for wifi channels (channels 1 to 8 are used, all others are not...) and yet labview gives me the same result... (attached file = 2 GHz, the other is a comparison of the 5 GHz, 2,412 GHz and 2,484 GHz)
material:
NEITHER USRP N210 (rev 4)
CBX 1200-6000 MHz Rx/Tx (40 MHz)
Antenna VERT900
connecting via gigabit
PC: W7 64 bit, i7-2600 to 3.4 GHz, 4 GB RAM
Thanks in advance
Hey insiderbe,
I did some research on the Ettus forum and found the following:
https://lists.gnu.org/archive/HTML/discuss-gnuradio/2010-08/msg00237.html
https://www.Ruby-Forum.com/topic/214890
I suspect that the IPS you see on 0Hz is the DC offset that is introduced to the ADC of the USRP N210. We can confirm this by removing air and closing the RX. If the tip is still there, it's a feature of the analog input circuit.
Brian of Ettus recommends tuning your frequency slightly out of your signal of interest and using a high pass filter to remove DC offset. I recommend looking at the second link for more information.
With respect to obtaining the value of art through many different frequencies, I think that it is a property of the antenna used. The VERT900 is valid from 824-960 MHz and 1710-1990 MHz. can you listen to one of these groups and test your power, even if you have a known signal? You have another USRP generator or a function to generate a known signal?
https://www.ettus.com/product/details/VERT900
My last concern use the N210 with the CBX in LabVIEW Communications. According to the Readme, it's an unsupported hardware configuration, which means that R & D has not tested the configuration, and we do not know how the configuration will occur.
http://download.NI.com/support/softlib//RF/NI%20USRP/15.0/niUSRP_readme.html
Thank you for this post!
Kind regards
Tags: NI Products
Similar Questions
-
How to get the same result on different characterset?
Hello experts,
I use
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production PL/SQL Release 11.2.0.3.0 - Production "CORE 11.2.0.3.0 Production" TNS for 64-bit Windows: Version 11.2.0.3.0 - Production NLSRTL Version 11.2.0.3.0 - Production
Needing a result even on my example.
SELECT ASCII('ˆ') -- when characterset is -NLS_CHARACTERSET WE8MSWIN1252 FROM DUAL; --result 136
SELECT ASCII('ˆ') -- when characterset is -NLS_CHARACTERSET AL32UTF8 FROM DUAL; --result 52102 but need 136
I need same result.
Thanks for your time...
EDITED RESULT.
Ask2Learn
You test something that you call "encrypted" data, which are not at all encryption.
For example speaking of letter t.
The CHR (ASCII('t') + 20) operation is pretty useless. You try to find the character that has the code binary and longer than 20 that the letter 't'. This can work with single-byte as WE8MSWIN1252 character sets, but it does not work with variable width as AL32UTF8 character sets. The letter 't' a code 0 x 74 in WE8MSWIN1252 and AL32UTF8. If you add 20 (decimal), you get 0 x 88. Byte 0 x 88 is a valid code in the WE8MSWIN1252, but is not a valid code in AL32UTF8. Bytes in this range may bytes of continuation in AL32UTF8, i.e. a second, third or the fourth byte of a multi-byte sequence.
The "circumflex accent" character code 0 x 88 (in WE8MSWIN1252) has the code of two bytes 0xCB 0 x 86 in AL32UTF8.
So, why not take a look at DBMS_CRYPTO integrated
Hope this helps
Hamid
-
Can you change text of reversal in the same range for different triggers?
Hi, I have not used Fireworks since version 3, which was about 6 years ago when I dabbled in web development. My past has turn against me, and I need to make a pretty simple site quickly enough for my boss. I myself have CS4, and now that I understand that you can only use the buttons for disjoint bearings, I begin to make progress...
What I want to achieve, is that there are 6 "buttons" on my page, which, when they you flipping them will display the text in a box on the side. I would use separate boxes for each button, but there is not enough space on the page, because there is a lot of text, so I would use a box at the same place to display all 6 texts, according to which the button is reversed. Is this possible?
I have no doubt entirely my head layers round and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right drill bit using the product?
Because the reversal disjoint button does not work, I created 6 slices for triggers. I first tried the hot spots, but could not use them as I want as a direct substitution trigger the filter effect.
Yes, you can trigger the different content on the postponement of several other sections.
It is easier to show the describe statement, so here is a sample file that does what I think you are looking for:
(1) six buttons
(2) each button a unique text
(3) each button corresponds to a rollover State
(4) single text appears in the same place for each button on turnover
I hope this helps!
Dave
Right-click and save the image below - it's a Fireworks source file:
-
List of deployed applications. Different results for different hierarchies of MBean
Hello
When I list deployed applications, I get different results depending on what hierarchy MBean I question:
- serverConfig():
wls:/MY_WEBLOGIC_DOMAIN/serverConfig> listApplications() APPLICATION_1APPLICATION_2
- domainRuntime():
wls:/MY_WEBLOGIC_DOMAIN/domainRuntime/AppRuntimeStateRuntime/AppRuntimeStateRuntime> ls() -r-- ApplicationIds java.lang.String[APPLICATION_1, APPLICATION_2, APPLICATION_3]
No idea why is APPLICATION_3 in the list?
Thanks in advance,
Luis
PS: if I apply directly to the managed server:
wls:/MY_WEBLOGIC_DOMAIN/domainRuntime/ServerRuntimes/prodGAD_1> ls('ApplicationRuntimes') dr-- bea_wls9_async_response dr-- bea_wls_cluster_internal dr-- bea_wls_deployment_internal dr-- bea_wls_diagnostics dr-- bea_wls_internal dr-- APPLICATION_1 dr-- APPLICATION_2
Hi Vijaya,
Thanks for your reply, yes you are right, my config.xml file I see this request:
APPLICATION_3 ... ear ...ear DDOnly But now that I read your response, I already rebooted the AdminServer. This new beginning has resolved the problem.
Thank you
Luis
-
Same package for different teams?
Hi, we have several clients in the same environment/area and we want Don t to create 4 different packages of Photoshop CC (exactly the same thing with Creative Cloud packed Packer).
If we use the CCP with a generic Adobe account and pack these applications for teams, may all our connection of different customers in the app with their own accounts or we will have problems of licenses?
Or do we need to pack the apps and be logged on as a member of the team who will use the app?
If you perform a deployment of the named user where each user connects to the license of the software, then your approach should work fine. The sign in during the creation of a package is not the software under license, it combines just you to an organization so that Packager knows that you are eligible to be deployed.
-
How to get results for different conditions of a line?
Hello
I have the following statement for 11g
Select sum (A.Wert) of
(
with t as (select vtobslpos. RANK rank #, vtobslpos. ANZAHL count #, vtobsl.faellig f #, vtobslpos. PAYMENT vtobslpos wert, vtobsl
where vtobslpos. SYSVTOBSL = vtobsl.sysid and vtobsl.inaktiv = 0 and vtobsl.sysvt = 165406
)
t1 as)
Select rownum rn
of the double
connect by level < = (select sum (County #) t)
)
Select row_number() line (order of ranking #, rn) #, ranking #, 1 count, add_months (f #, row_number () (order of ranking #, rn)-1) Faellig, Wert
t, t1
where t1.rn < = t.count #.
) AT
' where A.Faellig > = ' 30.06.2011.
' - where A.Faellig between ' 30.06.2011 "and + 30 to_date('30.06.2011','dd.mm.yyyy')
-where A.Faellig between to_date('30.06.2011','dd.mm.yyyy') and to_date('30.06.2011','dd.mm.yyyy') + 30, 90
that works fine for all three, where the conditions used both. What I would like to have are the different results of the sum (A.Wert) of all three conditions
"Condition 1: where A.Faellig > = ' 30.06.2011.
"Condition 2: where A.Faellig between ' 30.06.2011" and + 30 to_date('30.06.2011','dd.mm.yyyy')
Condition 3: where A.Faellig between to_date('30.06.2011','dd.mm.yyyy') and to_date('30.06.2011','dd.mm.yyyy') + 30, 90
in a row without repeating the statement internal / virtual table (with t as...-...) One that provides a payment stream that is stored in a form that is compressed in the comic book as follows
LINE # FAELLIG WERT
1 15.10.2004 00:00:00 691,48
15.11.2004 2 00:00:00 691,48
15.12.2004 3 00:00:00 691,48
4 15.01.2005 00:00:00 691,48
15.02.2005 5 00:00:00 691,48
15.03.2005 6 00:00:00 691,48
15.04.2005 7 00:00:00 691,48
15.05.2005 8 00:00:00 691,48
15.06.2005 9 00:00:00 691,48
15.07.2005 10 00:00:00 691,48
15.08.2005 11 00:00:00 691,48
15.09.2005 12 00:00:00 691,48
15.10.2005 13 00:00:00 691,48
15.11.2005 14 00:00:00 691,48
15.12.2005 15 00:00:00 691,48
15.01.2006 16 00:00:00 691,48
15.02.2006 17 00:00:00 691,48
15.03.2006 18 00:00:00 691,48
15.04.2006 19 00:00:00 691,48
15.05.2006 20 00:00:00 691,48
15.06.2006 21 00:00:00 691,48
15.07.2006 22 00:00:00 691,48
15.08.2006 23 00:00:00 691,48
15.09.2006 24 00:00:00 691,48
15.10.2006 25 00:00:00 691,48
15.11.2006 26 00:00:00 691,48
15.12.2006 27 00:00:00 691,48
15.01.2007 28 00:00:00 691,48
15.02.2007 29 00:00:00 691,48
15.03.2007 30 00:00:00 691,48
15.04.2007 31 00:00:00 691,48
32 15.05.2007 00:00:00 691,48
33 15.06.2007 00:00:00 691,48
34 15.07.2007 00:00:00 691,48
35 15.08.2007 00:00:00 691,48
36 15.09.2007 00:00:00 691,48
37 15.10.2007 00:00:00 691,48
38 15.11.2007 00:00:00 691,48
39 15.12.2007 00:00:00 691,48
40 15.01.2008 00:00:00 691,48
41 15.02.2008 00:00:00 691,48
42 15.03.2008 00:00:00 691,48
43 15.04.2008 00:00:00 691,48
44 15.05.2008 00:00:00 691,48
45 15.06.2008 00:00:00 691,48
46 15.07.2008 00:00:00 691,48
47 15.08.2008 00:00:00 691,48
48 15.09.2008 00:00:00 691,48
49 15.10.2008 00:00:00 691,48
50 15.11.2008 00:00:00 691,48
51 15.12.2008 00:00:00 691,48
52 15.01.2009 00:00:00 691,48
53 15.02.2009 00:00:00 691,48
54 15.03.2009 00:00:00 691,48
55 15.04.2009 00:00:00 691,48
56 15.05.2009 00:00:00 691,48
57 15.06.2009 00:00:00 691,48
58 15.07.2009 00:00:00 691,48
59 15.08.2009 00:00:00 691,48
60 15.09.2009 00:00:00 691,48
61 15.10.2009 00:00:00 20000
62 15.11.2009 00:00:00 1500
63 15.12.2009 00:00:00 1500
64 15.01.2010 00:00:00 1500
65 15.02.2010 00:00:00 1500
66 15.03.2010 00:00:00 1500
67 15.04.2010 00:00:00 1500
68 15.05.2010 00:00:00 1500
69 15.06.2010 00:00:00 1500
15.07.2010 70 00:00:00 1500
71 15.08.2010 00:00:00 1500
72 15.09.2010 00:00:00 1500
73 15.10.2010 00:00:00 1500
74 15.11.2010 00:00:00 1500
75 15.12.2010 00:00:00 1500
76 15.01.2011 00:00:00 1500
00:00:00 77 15.02.2011 1500
78 15.03.2011 00:00:00 1500
79 15.04.2011 00:00:00 1500
80 15.05.2011 00:00:00 1500
81 15.06.2011 00:00:00 1500
82 15.07.2011 00:00:00 1500
83 15.08.2011 00:00:00 1500
84 15.09.2011 00:00:00 1500
85 15.10.2011 00:00:00 1500
86 15.11.2011 00:00:00 1500
87 15.12.2011 00:00:00 1500
00:00:00 88 15.01.2012 1500
00:00:00 89 15.02.2012 1500
00:00:00 90 15.03.2012 1500
00:00:00 91 15.04.2012 1500
00:00:00 92 15.05.2012 1500
93 15.06.2012 00:00:00 1500
00:00:00 94 15.07.2012 1500
95 15.08.2012 00:00:00 1500
00:00:00 96 15.09.2012 1500
97 15.10.2012 00:00:00 1500
98 15.11.2012 00:00:00 1500
99 15.12.2012 00:00:00 1500
100 15.01.2013 00:00:00 1500
101 15.02.2013 00:00:00 1500
102 15.03.2013 00:00:00 1500
00:00:00 103 15.04.2013 1500
104 15.05.2013 00:00:00 1500
105 15.06.2013 00:00:00 1500
106 15.07.2013 00:00:00 1500
107 15.08.2013 00:00:00 1500
108 15.09.2013 00:00:00 1500
109 15.10.2013 00:00:00 1500
00:00:00 110 15.11.2013 1500
111 15.12.2013 00:00:00 1500
112 15.01.2014 00:00:00 1500
113 15.02.2014 00:00:00 1500
114 15.03.2014 00:00:00 1500
115 15.04.2014 00:00:00 1500
116 15.05.2014 00:00:00 1500
117 15.06.2014 00:00:00 1500
118 15.07.2014 00:00:00 1500
119 15.08.2014 00:00:00 1500
120 15.09.2014 00:00:00 1500
121 15.10.2014 00:00:00 1500
122 15.11.2014 00:00:00 64883,93
Thanks a lot for any help
Best regards
CarstenSomething like that...
SELECT SUM( CASE WHEN condition1 THEN A.Wert ELSE 0 END ) AS sum1, SUM( CASE WHEN condition2 THEN A.Wert ELSE 0 END ) AS sum2, SUM( CASE WHEN condition3 THEN A.Wert ELSE 0 END ) AS sum3 FROM ( with t as .. .. .. -- Remove the three conditions from the WHERE clause
-Rakesh
-
Same license for different ASA SSL VPN
Hello
I have run ASA5510 SSL VPN is installed with a license. I want to replace it with the new ASA5510 without SSL VPN license. Is it possible to copy the license from my old ASA? Can I order different license for my new box?
THX
Iwan
A new license is required.
License key is created based off the serial number of the device.
Gilbert
-Rate, if it helps-
-
Hi guys OAF.
Created a page of manual search with several buttons below. After entering search criteria and click on the first button, it shows the records in a separate page where I perform trade operations. The second page, I have a "back to the main search" link that takes me to the first page of search.
Now, if I remove the value of any field of text input by clicking X mark the end of the field, or pressing the button remove the key board and try searching again, same values are to come in the next page as if I did not remove the value.
Data on the next page is mainly with the help of setWhereClause. And here is the code I wrote.
public void issueQuery (String OrderNum)
{
If ((OrderNum! = null) & & (!("".)) Equals (OrderNum.Trim ()))
{
setWhereClause ("ORDER_NUMBER =: 1");
setWhereClauseParams (null); Always reset
setWhereClauseParam (0, OrderNum);
}
executeQuery();
}
Please advice, what has gone wrong or its something Oracle behavior?
Thank you
Bideau
I got the answer, it is resolved after the setwhereclause reset each time.
-
Handling for different combinations of input Boolean result
Hi team,
Need inputs or suggestions below scenario to manage the results for different combinations.
We have more than a thousand of the Boolean attributes that determines the different results. Here is the example.
Based on the choice of Yes or no it should show different results as results 1 (will be several values Outcome1.1, outcome1.2 etc... 7 maximum)), stability.2... Outcome10. This is only for a single Boolean attribute.
I tried to use excel and word and found that there are a few limitations to achieve. It is not picking up the second attribute boolean values in excel and in word result generates a single (if we have more attributes are 2 true, it should display different results for each) and can not use the names of different result as contents page will go more than 20 or 30 pages.
Question
Value
Results
Attribute1 Boolean
Yes
Useful info: abc
Useful info: xyz
Useful info: abcdef
Fees: 20
Eligible licence: ZZZZZ
NO.
Useful info: ABCE
Useful info: xxxxx
Boolean Attribut2
Yes
Useful info: defghhh
Useful info : rsttttt
Useful info : xyzxyz
Useful info : usefulinfo
Fee: 30
Eligible licence: ABC
NO.
Can you please throw your point of view on this.
Thank you
Vivek
When you use the declarative rules, it's always better (and much easier to manage) to start expressing the decision or determination and then specify all conditions that lead to this decision. Each rule is independent in that it expresses a true statement independently of any other rules that are expressed.
For example:
ABC is recommended if information
A is true or
both
B is true and
C is true
XYZ permit is recommended if...
-
Import of the results in the preview video even for different videos videos
Hello
I use the latest version of Premiere Pro and have problems reading or working with imported videos. The video source I provided is stored in a strange hierarchy where each file MP4 is in its own subfolder; so I need to make these in one or import the whole structure. That part works. The weird part is that, when previewing the videos, it shows and reads the overview even for different files.
If I place all MP4 files in a directory and then import it, it works.
I'm guessing it's a bug or something. Displays the information here the best way to report the bug?
Thank you
San
The directory - import of these files Structure translates the same overview for different videos
If I put the files in the same folder, it works
The nice thing in the subject using the (correct) method of Jim, besides that it works, is that more long records that were burglarized several files on the card (split clips), first recognize them for what they are (parts of a longer clip) and them will be important as a single clip, long breaks/seedless inside. There are many advantages for the workflow 'copy the entire folder, import with Media Browser'.
One of the problems with the import only some clips of different maps is that you can have multiple clips with the same name, such as 0001.mts and then the first can get confused. Using the method above, this means that unique clips are indeed kept unique in first and not combined with other elements of the same name.
Thank you
Jeff
-
Running the Single Instance and RAC on the same server of different homes.
Hi guys,.
I already have 4 node RAC12c installed on OLE 6.
I'm planing on some of my other 12 single instance databases on other migration for RAC nodes.
Please correct me here if I am wrong...
My understanding is that, to be able to use DBCA or rconfig for conversion of database instance RAC, the only instance and RAC cluster must run on the same server or machine node.
Thanks to this understanding... Am planing on the installation of a binary single instance on one of my cluster node node1 say and then use RMAN to duplicate the single instance or just an RMAN restore from the node of the instance that is unique to this node1. Am capable of this plan must then use DBCA or rconfig to convert the CARS database.
Now, my question is can I run a single instance and RAC on the same server for different homes with different database ports?
2. for these unique instance that runs on the server RAC 1 node, can I use the RAC database listener that runs from the House of the grid or I have to create another auditor?
Thank you in advance and also let me know if I can use DBCA or rconfig when the only instance and rac database are on separate nodes.
K
Fix. And that's what I would normally do. In general, I would have just an ORACLE_HOME directory that can be used by the punctual and RAC databases at the same time.
See you soon,.
Brian -
I use the outgoing/incoming analog DDK with the DAQ 6341 SMU map.
The examples, for example aoex5, show a single timer (method outTimerHelper::loadUI), but the example shows the DMA loaded with same size of vector data.
There is a comment in the outTimerHelper:call rogramUpdateCount, which implies that memory sizes different pad per channel can be used.
(the comment is: switching between the sizes of the various buffers is not used)
Nobody knows what should be the format the DMA buffer for data from multiple channels with different frequencies?
For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz. What looks like the DMA buffer?
With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?
Hello Kenstern,
Data are always intertwined since each card has only a single timing for each subsystem engine.
To AO, you must specify the number of samples that will be released to the AO. You also specify the number of channels. Because he didn't is that a single engine timing for AO, each AO will be channel will be updated at the same time to update clock tick. Data will be interlaced exactly as shown in the example because each channel AO needs output at each tick of the clock to update. The data itself can change depending on the frequency you want to copy.
kenstern wrote:
For example, we want a0 with a sinusoid at 1 kHz and a1 with a sine wave of 1.5 Khz. What looks like the DMA buffer?
With the same frequency for each channel, the data are interleaved, for example (ao0 #0, ao1 #0; ao0 ao1 #1, #1,...), but when the frequencies for each channel is different, what the stamp looks like?
In your example, you must come with an update rate that works for the two waveforms (sine waves of 1 and 1.5 KHz). To get a good representation of a sine wave, you need to update more than 10 x faster than your fastest frequency... I would recommend x 100 if possible.
Update frequency: 150 KHz
Channels: 2
Then create you stamps that include complete cycles of each wave you want to produce based on the frequency of update. These buffers must also be of the same size.
Buffer 1: Contains data for the sine wave of 1 KHz, 300 points 2 cycles of sine wave
Buffer 2: Contains data for the sine wave of 1.5 KHz, 300 points, 3 cycles of sine wave
You can Interleave them as before. When the data are performed through the ADC, they are out different sine waves, even if the AO channels are updated at the same speed.
-
Air ipad 2 at the same price in different stores for Apple in California?
Air ipad 2 at the same price in different stores for Apple in California?
To different Apple store, Yes. Some other retailers can offer a small discount (Costco is about $ 20 cheaper, for example). but for the most part, it will be the same price regardless of where you buy it.
-
The same drive letter may point to different locations for different processes?
The same drive letter may point to different locations for different processes?
Our users have the E: drive mapped to one place. But I need a scheduled task in order to use the E: drive to point to a different location at the same time, without affecting the mapping of moose for logged in users.
There is no work around this need of ours. This is because users are working 24 X 7 update of our data files on the E: drive, and a log file is made. We plan prevent users for a minute every night while move us / save the log file and then allow users of the resume and allow a new log file to create. Then take the saved log file and apply it to a real set of monthly backup of data files, so the backup files will be ready for a recovery after disaster. The program that applies the transactions recorded in the data files is able to apply operations to files that are considered as being in the same exact location.
I know that's not possible without resorting to the application logs a set of files on a completely different machine. But I ask.
Thank you
Dan
Hello
The question you posted would be better supported in the TechNet Forums. I suggest you to ask your question in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads
I hope that helps!
-
Hello. Pavilion p6130y with Pegatron M2N7B - LA, Vista Home Premium 64 bit, Seagate Barracuda 7200.12 750 GB. Has stopped not working, with errors, none found in storage. Cable sata switched to other ports-same results. Bought the new Seagate hard drive and tested with new cables and ports with the same results. Taken to the technicians at best buy have tested and said it was the motherboard and not the hard drive. I don't know how they determined it was the motherboard - guy looked at the jury and said Oh yes I see it now... etc. Is it possible that I can say that it is the motherboard? I know enough to be dangerous ) with the material. Told us that a new motherboard is about $600. -better to get a new computer. The computer is around the age of 29 months. Is there a fuse that could be replaced if found reason for blowing possible in the first place? Seems too early for a bad mother for me. Thanks for any help.
Ah Ah! Your motherboard is the origin of the problem, not hard drives. If the system is out of warranty, chances are you would, but I always call and let them know you have a problem with the map of M2N7B - violet.
Maybe you are looking for
-
Mac Pro RAM, Audio, Bluetooth mouse problems
I recently bought an Apple factory refurbished Mac Pro (end 2013) and replaced the three-chip RAM of 4 GB with 16 GB of Crucial two chips. Everything was great for the first two weeks. Then I started having a strange audio problem. Audio would become
-
HP Pavilion g6t - 1 d 00: cannot find the Ethernet drivers
I have a HP Pavilion g6t - 1 d 00 Mobile (product #-A1J17AV;) Series # 5CG217015R) with Windows 7. The operating system has crashed so I reinstalled a fresh copy of Windows 7 (64-bit) on my computer. The HP support site is not all the drivers for the
-
I recently tried to partition my macbook pro (retina, 13 inches, mi 2014) that runs on osX El Captain using bootcamp. I installed Windows 10 and everything was fine until I realized that I am a fool one should have made my windows partition more so
-
What is c? 'historic' weird link?
Hello I have a problem with firefox history there is a link that won't even if I delete my history https://s15.postimg.org/dw1pc3uwr/image.PNG
-
How to get the phone in ongoing call screen
It is a follow-up on the menu of the phone not shown thread. I checked with the KB and found an interesting topic: How - to upgrade a screen on the main event Thread My original question (as can be seen in the thread has already been mentioned) was t