SSD for the Scratch, Cache and swap file?

Similar Questions

• Profile of user runs as an administrator for the daily work and this account is corrupt and switch every time on a portable temporary file is opened (created)

  User profile runs as an administrator for the daily work and this account is corrupted and switch every time on my laptop, just open a temp file (created), I downloaded a driver to run my cell phone as a modem while he is on vacation. and the problem started after downloading this software,

  Hi johnnyroque

  Thanks for posting on Microsoft Answers.

  Try to use the following steps to enable the built-in Administrator account and further, then the steps and links to fix a corrupted profile.

  Please start on the mode of the Windows recovery environment (WINRE).

  -To start the computer into WinRE mode, insert the Vista CD in the CD tray, restart the computer.
  -When you are prompted to "press any key to boot from the CD-ROM..." Press ENTER.
  -Select the language by default, click Next.
  -Select "repair your computer".
  http://www.Flickr.com/photos/freeed/363935713/in/set-72157594490796701/
  -Select command prompt, and then type the following commands:

  NET user administrator / Active: Yes
  NET user {user account name} {new user password}

  Note: Please enter the user name and the password without the braces of the flower.
  
  -Restart the computer normally.

  //////////////////////////////////////////////////////////////////////////////

  To fix a see corrupted profile link below:
  http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Please post back and let us know if it helped to solve the problem - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file.  I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for

  When I import my .wav and my .m2V files still accepts the .wav file but does not load the .m2V file. I created movie DVD 5 discs - still accepted the .wav and for the four remaining groups .m2V files and created 4 DVD discs for these files. What can I do to be free from this error?

  OSstatus = error-37

  Note that this a Mac operating system error.

  http://forums.CreativeCOW.NET/thread/145/865447

  Error when importing the file: slash or other character in file name

  http://forums.Adobe.com/message/3729601

  The build error: slash or other character in file name

  http://forums.CreativeCOW.NET/thread/145/868994

  The build error: complete startup disk

• MAC OS Yosemite - CS6 - earlier, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's all

  -At the time, I did something to where when I open a file in photoshop, is no longer a single window, now it is two storage ones. one for the program itself, and another for the actual file how to return it where it's a window without having to be full screen mode? I managed to go a few times like this, but right now it's really annoying me. Help!

  

  Just drag the small window up just under the toolbar, you will see the area highlighted, and when you drop the file should anchor.

• Sizes of Splash screen and names for the iPhone 6 and 6 more in the file descriptor xml files

  Is anyone know the sizes of screen and the file names for the iPhone 6 and 6 more (for the descriptor xml file)? Or current splash screens works on both devices?

  i.e. Default-Portrait.png *-768w x 1024 h

  Hello

  Here is the specification.

  iPhone 6	Start screen	750 x 1334	72	[email protected]	Resources or resources/iphone
  iPhone 6 more landscape	Start screen	2208 x 1242	72	[email protected]	Resources or resources/iphone
  iPhone 6 Plus portrait	Start screen	1242 x 2208	72	[email protected]	Resources or resources/iphone

  You can find more info here - http://docs.appcelerator.com/titanium/3.0/#! / guide/Icons_and_Splash_Screens-section-290048 97_IconsandSplashScreens-Splashscreens

• A SCN for the entire database and the different SNA for the data files?

  DB Version: 11 g
  
  I always thought that there is a unique SCN for the database as a whole.
  A quote from the link below as
  When a control point is completed, Oracle stores the RCS individually in the control for each data file file
  http://www.dbapool.com/articles/1029200701.html
  
  
  What does that mean? There is a SNA for the entire database, and there are individual SCN for each data files?

  Well, unfortunately, the article says more bad than good things. Or if I can't call them wrong, they are rather confusing and rather than clear things for the reader, its making them appear to look more confused.

  First things, YVERT is used for read consistency (CR) mechanism and the backbone of the notion of Multiversioning. The control point is the mechanism to help that recovery is decided. Contrary to what said article, not any kind of checkpoints update both the data file and the control file, and also, there is not a type of them as well. In addition, the article says that the LAST_CHECKPOOINT is set to NULL, while its actually set to the infinity since it is not possible to detect the moment when the database is opened, that the last issue of control over the file would be. In the case of complete control point, this number is saved and is also associated with the toa Controlfile own database leader at the next startup. If this is not the case, there is an inconsistency in the stop_checkpoint of the data file and the stop_checkpoint reocrded in the control file, leading to a recovery of the instance.

  There are several types of control points. Similarly, there are several types of SNA as well. Without going into the details of these, IMO, the article simply means that when the control point write over a file passes, oracle updates the file checkpoint on it and this is recorded in the Controlifle. as well.

  HTH
  Aman...

• Hardware configuration for the catalog, previews and the RAWs?

  Hi all.

  For the past 2 years I've been running a retina 27 "iMac with 512 GB SSD, because it is the essential motivation.

  My catalog, previews and RAWs have all been on a connected USB3 SSD 1 TB and backed up with time machine to 2 TB drive HARD USB3.

  Now all 3 of my discs are at capacity.

  Historically I've shot with a D800 the D810 so the raws were huge. Now, I'm moving to an X - T2.

  The easy answer is to move the SSD to 2 TB SSD and the TM drive to a 4 GB ext USB disk, which should buy me a few years.

  Maybe another option is to invest in a 4-Bay NAS, stick 4x4gb operates to and use the batch for the backup storage and image TM.

  What do you think guys? even if I'm running a processor i7 and 32 GB of RAM, sake still images second or 2 to appear in my current setup, I really don't want them to appear all slower. It was suggested that I could move all the images more than a year on the NAS and keep the catalog, the previews and the latest images on the 1 TB SSD.

  Curious to hear other ideas and configurations that work well.

  Thanks in adv.

  Craig

  Since you are using a fairly recent Mac she must have a thunderbolt port, otherwise 2 of them and you can also add a USB 3 hub to connect multiple disks to your current configuration. I don't see in adding disks more large and small age of retirement. Just add another 2 disks of the same capacity. You can also get rid of some of the old Time Machine backups to free up space on the drive that you configured for Time Machine.

  As far as I KNOW 99% of multiple NAS boxes drive (Bay) are thus set up a RAID array. Which would limit the overall storage capacity of this box.

  The LR catalog file must also be on a drive connected directly to the computer and not on a network drive.

• Trying to open the message box appears 'lightroom has encountered an error when reading the preview cache and needs to stop smoking' Lightroom "Lightroom will try to solve this problem, the next time that it launches" OK when you press closed Lightroom an

  Trying to open 5 Lightroom, a message appears 'Lightroom has encountered an error when reading the preview cache and needs to quit' "Lightroom will attempt to solve this problem, the next time he throws" when OK key Lightroom quit unexpectedly and the computer returns to the office.  This persisted for 2 days and it has not set itself.  help please.

  Click OK close Lightroom.

  You must manually go to the location of your Lightroom by Finder catalogue / file Explorer and get rid of the Previews.lrdata folder

  By default, the location would be in Pictures\Lightroom folder

• Partitions on SSD for the hypervisor host of vSphere5 (Free Edition)

  Hello

  This will be my first installation of a system of 5 hypervisor vSphere (Free Edition). My new PC will contain an SSD (120GB) for the vSphere host and VMs. in addition, it will contain a RAID controller with multiple SATA drives for data. My questions are:

  Do I have to create partitions on the SSD drive for installing vSphere 5?

  I read on http://vmetc.com/2009/07/22/best-practices-for-vsphere-esx-4-service-console-partitions/

  There is several necessary partiotions. Is the installation program automatically creates those partitions?

  Is it possible to store the computer virtual (System of each operating system partition) on this SSD also?

  I will store VMs for 2 x Windows7 (approximately 2x30GB), 1 x FreeNAS, 1 x Linux for Zarafa, 1 x Linux for many other services.

  Kind regards

  Oliver

  Hello and welcome to the forums.

  Do I have to create partitions on the SSD drive for installing vSphere 5?

  No, the installation program will take care of everything for you.

  Is it possible to store the computer virtual (System of each operating system partition) on this SSD also?

  Yes, the installer will create a VMFS on the SSD volume where you can place these files.

  Good luck!

• Is it OK for the test server, and the server signs Local point to the same location?

  There seems to be three places where the files of my site: local files, server assessment and remote server.  I am happy with the remote server.  What I'm confused about are the other two.

  I understand that to build a site using mysql databases that I need to set up a test server.  Here is my configuration: Windows 10, CBWMS 2015.1 using XAMPP with the folder root of my site in htdocs.  I tested FormMail, hence the name of the site is formmail

  

  So, I open one of my files from the local files (right) Panel, modify it and it save (in the local files Panel).  I then use a preview in the browser to see my changes.  It seems that I didn't need to use was ABLE to move the file to the test server, because the file/s are already here, because as shown in the screenshot, the display of local files as the testing server view are in the same place.  What is the point of the testing server Panel?

  I know that I can put the Panel on the left with the remote server. This will allow me to sync with my ISP host.  If I put the left - and probably testing server Panel a sync is useless because the files are in the same place as the Local file?

  Maybe my setup is incorrect.  I guess my question is, is it OK for the test server, and the server signs Local point to the same location?

  Thank you gentlemen (and Lady!) I'll go forward with newfound confidence, Bravo.

• I can't get my LR to open without this message: "Lightroom has encountered an error when reading the preview cache and need to quit."

  Lightroom has encountered an error when reading the preview cache and needs to stop smoking.  Help, please

  Hi crystalc,

  It seems that the preview cache has become corrupted.

  You must go to the location where your catalog is stored via finder/File Explorer and get rid of the file ending with Previews.lrdata (not .lrcat)

  Default location of the catalog is under Pictures\Lightroom

• Is there any fix planned for the slow lingering and pervasive in LR6/cc?

  LR6, Win7, 6 GB of ram

  Is there any fix planned for the slow lingering and pervasive in LR6/cc? I disabled the GRU.  I cleared the cache.  My catalogs are updated to LR 5.7.1.  Everything is slow.  It doesn't matter what it is.  Its takes twice as much time to do something.  LR will freeze for 5 to 15 seconds at a time without apparent reason.  The use cases are to go "Not responding" are numerous and vary widely.  I check the CPU during these events Nn sensitive usage and its pretty much slowed down.  I have check the disk usage and its also generally inactive.

  I thought it might be VSCO plugins, but it's not.  LR5.7.1 is always screaming fast while LR6 is an old slow cow.

  Here is an example that I saw that is repeatable:

  (1) start an import

  (2) choose the photos from an SD card

  3) click the + to add them to the catalog

  4) appears to enter a catalog name

  (5) start to type in the dialog box.
  (6) after may entered 8 letters, LR goes "Not responding", 10 seconds

  (7) after LR starts responding again, emphasis on catalog name field has been lost

  There is no reason for a freezing here.  The CPU does nothing.  The drive does nothing.

  There are things like that in every sense.

  Another example.

  (1) develop the Mode

  (2) select a photo

  (3) left and right panels are hidden

  (4) browse the side panel right of the mouse so that it will pop-out

  5) LR freezes for 5 seconds

  6( ) when the right panel opens, click on the number of exposure (0) and try to type in 1.25.

  7( ) after after graduating 1,2, LR hangs for 10 seconds.

  8( ) when LR answers once again, finishing by typing in the 5 other (1.25) and press to enter.

  9( ) the image immediately illuminates as expected.

  Yay!  They have updated LRCC/6 today.  The slowness and latency seem to have disappeared! Yay!  I can get back to work!

• Error: "LR has encountered an error when reading the preview cache and need to quit."

  Trying to open it, a message "LR has encountered an error when reading the preview cache and needs to stop smoking. LR will attempt to fix the next time it starts. "apppears and it stops. Tried many launches and the same error appears. Help!

  Post edited by: Brett N

  OK, go to the Lightroom folder (in images by default) and delete the folder/file ending with the extension.lrdata. Previews have somehow become corrupt.

• LR has encountered an error when reading the preview cache and needs to stop smoking.

  I have the trial version of Lightroom 30 days.  I was able to use it for a week, but the last weeks of 1,5 to 2, it was locked up and that gives this error message.  How to solve the problem?  And how to reset the free 30 day trial?  I wish I had the time using the product before deciding on the annual contract.

  "LR has encountered an error when reading the preview cache and needs to stop smoking.  Lightroom will attempt to solve this problem, the next time it starts. »

  Thank you.

  Delete the cache of the overview of the Lightroom folder in your pictures folder if you used the default location. It has the extension .lrdata.

  You cannot reset the trial period.

• At startup, LR 4.4 cannot read the preview cache and stops

  Can't open LR 4.4.  Get LR error message cannot read the preview cache and needs to close.  Says he will try to repair to the stimulus.  That happened after that laptop battery so closed that I was in LR.

  Do you this for your operating system, using the Explorer or Finder, without LR running.  You must delete the FOLDER that is located in the same folder as your LR catalog, but with a name starting with the same name as your catalog but then including a Previews.lrdata suffix.