samples does not: class not registered

Similar Questions

• BlackBerry.Launch.newmap sample does not work

  Hi people,

  I try to open the maps app from a web page. I was able to start the maps app, but it does not show the location. Now, I'm not even able to open the application. I use the example of code to:

  http://docs.BlackBerry.com/en/developers/deliverables/11849/blackberry_launch_971534_11.jsp#Blackber...

  that is to say:

  blackberry.launch.newMap({)
  "latitude": 4346518,
  "longitude":-8052237
  });

  I also use in similar problems with the launch.newContact and the launch.newAppointment. I can't get the dates informed correctly according to the examples.

  I coded the javascript code in an asp.net page that is published on my local web server and I am accessing the page via the simulator of blackberry 9800.

  Anyone have any ideas?

  Thank you

  Carlo.

  Well, I think I found the solution. I put in the code samples and I managed to get it to start up the card. I reduced the code until I'm at the point where I found that what missed me was:

  blackberry.location.refreshLocation ();

  I called who, before calling the launch.newMap. Is this really what was needed or is it just a case of what I call the programming of pasta: throw the code to it and when when something sticks, it's done.

  Thank you

  Carlo.

• Seagate 2 TB external hard drive does not register

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  I'd appreciate any help you can give. Thank you!

  Riley G. says:

  I almost always took care to disconnect the drive safely, and continued to work well when he is accidentally unplugged (only happened 3 - 4 times). Today he did not appear in the office or in the finder, the responses in this thread, external HARD drive Seagate will appear not in place were a little helpful but did not fix my problem. Here are some of the facts of the case, somehow:

  • I use a 2012 MacBook Pro running El Capitan with a 1 TB hard drive (this was added later when the original drive has failed)
  • External hard disk was used to transfer large files a bit to a laptop running Windows 8 and was not ejected safely from this computer
  • The reader is displayed correctly on other MacBooks (tested today) and all files are in order.
  • The drive appears in the report of the system but does not appear in the disk utility.
  • The drive does not appear in the Seagate dashboard that was installed when the car was purchased.
  • The drive has two partitions: one for Time Machine and the other to the format to work on Mac and Windows to store normal files.
  • My MacBook has been impossible to open a .dmg file today, unconnected with. I do not have this issue.

  If it shows in disk utility > file >Mount

  
  

• My zune does not register in the windows media player library

  Media Player does not save the zune I have and I can't sync together

  Hi guardmemeber,

  You will not be able to synchronize music player Zune with Windows media player, you will only need to use the Zune player software to synchronize.

  For more information about this after your query in the Zune forums.

  http://www.Zune.NET/en-us/support/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 6921 IPPhone does not register after the firmware update

  Hi all

  We try to update the firmware 6921 phones.

  We have CUCM system version: 8.0.3.20000 - 2

  Current firmware on the phones of SCCPS 6921 is SCCP69xx.9 - 0-3-0.

  We tried to upgrade to SCCP69xx.9 - 4-1-3 SR 1, but the phone will not register with this firmware.

  As we modernize cucm to 10.5 (1), we woud would have all put phones upgraded to the version of the firmware shipped with cucm 10.5 (1) before the cut above miniimize downtime.

  Any suggestions will be helpful on how to solve this problem.

  Thanks in advance

  Hi Ravi,

  I guess you have to download the Pack of the device if you want to use 9.4 (1) SR1

  9.4 release notes (1) SR1 say that

  Before installing the version, check that the device Package Cisco Unified Communications Manager is installed

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/cuipph/6900_series/firmware/9-4-1-SR1/Release_Notes/P690_BK_6AA8901D_00_6900-series-release-notes-9_4_1sr1.PDF

  Now if I see the Compatibility Pack device matrix, it's for CUCM 8.5 (1), but in your case, call Manager version is 8.0.3.20000 - 2

  http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/compat/matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix/CMDP_BK_CCBDA741_00_cucm-device-package-compatibility-matrix_chapter_00.html#CMDP_RF_C6E2BC42_00

  regds,

  Aman

• MGCP FXO does not register with CUCM on VG204XM

  I have a VG204XM running MGCP with CUCM 10.5. When the port is changed and reset him CUCM config push down to the VG204XM there is an error (it is identical to the Bug CSCtr78616 reported on a router 28xx in 2011)

  In the newspapers, I see that, once the router receives the config it tried to configure AALN/S0 / / 0 (voice-port 0/0)
  However, for some reason, it seems that the router is to convert the port to a 65535 instead of 0

  "cmapp_xml_get_interface_info: slot = 0 vic = 65535 port = 0".

  Since the port above does not exist on the router the survey attempt a mistake.

  Mar 27 18:07:59.278: % SYS-5-CONFIG_I: configured from console by console
  Mar 27 18:07:59.278: cmapp_xml_get_interface_info:
  18:07:59.278 Mar 27: =.
  Mar 27 18:07:59.278: cmapp_xml_get_interface_info: slot = 0 vic = 65535 port = 0
  18:07:59.278 Mar 27: Interface_name: AALN/S0/0
  Mar 27 18:07:59.278: controller:
  18:07:59.278 Mar 27: addr: 65535/0/0
  Mar 27 18:07:59.278: interface:
  Mar 27 18:07:59.278: voice_port: voice-port 65535/0/0
  Mar 27 18:07:59.278: dial_peer: voice dial-peer 9990655350
  Mar 27 18:07:59.278: dial_peer_port: 65535/0/0
  Mar 27 18:07:59.278:
  Mar 27 18:07:59.278: cmapp_xml_configure_router: verification of the Deleted interfaces
  Mar 27 18:07:59.278: cmapp_xml_get_intf: looking for a vdb [65535/0/0]
  Mar 27 18:07:59.278: cmapp_xml_configure_router: analog ports are ready
  Mar 27 18:07:59.278: cmapp_xml_find_corr_intf_cfg:
  Mar 27 18:07:59.278: cmapp_xml_find_corr_intf_cfg: old_cfg is NULL
  Mar 27 18:07:59.282: cmapp_xml_intf_cfg_changed:
  Mar 27 18:07:59.282: old intf configuration is null
  Mar 27 18:07:59.282: cmapp_xml_cfg_analog_intf:
  Mar 27 18:07:59.282: cmapp_mgcp_get_card_type_for_analog_intf: looking for a vdb [65535/0/0]
  Mar 27 18:07:59.294: cmapp_xml_cfg_router_intf: intf configuration: [voice-port 65535/0/0]
  Mar 27 18:07:59.294: cmapp_xml_cfg_router_intf: configuration [echo - cancel enable]
  Mar 27 18:07:59.298: % SYS-5-CONFIG_I: configured from console by console
  Mar 27 18:07:59.298: cmapp_xml_cfg_router_intf: 395 line router configuration error
  Mar 27 18:07:59.298: cmapp_xml_send_msg_to_callmgr: CMBH_MSG_CFG_ERR of sending
  Mar 27 18:07:59.298: * info ERROR: the router configuration failed: voice-port 65535/0/0
  echo - cancel enable
  end

  I have a VG224 gateways running with MGCP CUCM 10,5 and no error

  Everyone knows about this problem on VG204XM?

  Hello

  Please check

  https://Tools.Cisco.com/bugsearch/bug/CSCui83022/?reffering_site=dumpcr

  Auto config MGCP fails for VG204XM
  CSCui83022
   

  Description

• BlackBerry Storm 2 9550 smartphones does not register in BlackBerry service.

  Hi guys

  I bought a Blackberry Storm 2 9950 of Verizone the United States 16 months ago and after two months I went to live in the Mexico. I got my unlocked BB and I used services Movistar with any problems until two months ago that I started facing problems for you to connect.

  I went to check this with Movistar carrier here at the Mexico, but support guys told me that it is a device of another company that they can help with configuration problems, or does not endorse her. He suggested me to throw it in the trash and buy another of his company.

  I think there could be a solution for this, I tried configuring it by my self audit as much as I could to support blogs.

  Can someone BB help? or I have to buy another phone brand and forget anithing on blackberry devices?

  concerning

  Saul

  Hi guys

  I got my Blackberry Storm 2 work back Friday last 13 overnight. I don't really know what had happened or who I have to thank for this one. But I'm happy to have my camera works again.

  I did not change any configuration, any more than some adjust I found here in this forum.

  So please consider this problem solved.

  Concerning

  Saul

• Outgoing sample does not create a output file

  Dear community,

  I've tested so far to export plug-in 'leaving '. It is compilable and run under Photoshop CC 2014. But if I run the plug-in in the submenu export, I get no output file.

  Debugging indicates that the plug-in is running the DoPrepare method (in the case of exportSelectorPrepare) and also the method of DoStart (in the case of exportSelectorStart), but when he jumps in CreateExportFile (inside the DoStart) it returns false and stops at the end of DoStart. As a result, no export file is written.

  Seems that the boolean PIOpenFile method does not accept the response of input parameter, fRefNum or result.

  Anyone have similar results? How can I solve this problem?

  Kind regards

  Silver

  What I'm saying, it's to plug the export does not give you that. You must export it to what you want. If you want a temp file something like this would work.

  NSString * tempDir = NSTemporaryDirectory();

  NSString * tempFile = [stringByAppendingString:@"/MyFile.txt tempDir'];

  const char * a = [tempFile UTF8String];

  FILE * fd = fopen (one, "w");

  If (fd)

  {

  fwrite ("test\n", 5, 1, fd); / /<-- replacing="" image="" data="" here="" probably="" as="" in="" the="" windows="" side="" of="">

  fclose (FD);

  }

  in my command prompt I can confirm that the file has been created:

  Cat ' / var/folders/ms/dv872b4s17j8zt039bbdh7_00000gn/T//MyFile.txt '.

  test

• Captivate 3 does not register app I want to record

  I test Captivate 3. I am trying to record an activity in my company's request. I select record new project, then select software simulation, Application. Can I get a dialog box asking me to explain the application I want to save, but it lists all open applications, with the exception of the app to my business! Any ideas why it does not recognize my application open?

  Thanks for the tips. I tried and it worked pretty well, but I tried that out I figured out what caused the problem. All my open applications in an occupant the entire desktop, with the exception of the app of my business that I had resized to size, I wanted to capture the maximized State. Once I enlarged society app, Captivate 3 he listed in the drop-down menu dialog box. Then, once I picked it, I could resize the window of the app to the desired size before you start recording...

• my product key for Home premium vistas of my backup disk does not register? help please

  I just bought a new card mother and tried to re install vista home premium 32-bit my sysytem origianl backup disk, so I could possible go to 64 bits, what has not happened and now I'm having to reinstall everything, however I said that I have to put my vista Home premium again? I click ok doing that, with the product key already stressed by the computer its self, and he said that my product key is valid? can you please help?

  I just bought a new card mother and tried to re install vista home premium 32-bit my sysytem origianl backup disk, so I could possible go to 64 bits, what has not happened and now I'm having to reinstall everything, however I said that I have to put my vista Home premium again? I click ok doing that, with the product key already stressed by the computer its self, and he said that my product key is valid? can you please help?

  The way you wrote, I guess that Vista was preinstalled on the computer when you purchased the computer.
  In other words, you have a version of OEM license. Yes?

  If so,the product key you have is related to the original motherboard. It is not good for the new MB.
  To use your product key, you must replace the motherboard with the exact model, the machine came with that.

  Call the manufacturer of your computer for a suitable motherboard.

• Time Machine does not register the last backups

  In Time Machine preferences, it signals that the last backup is June 2, but when I go to Time Machine I don't see what

  which seems to be backups in recent days.  How do both to sync to declare the same data?

  

  • Assuming that your profile information is correct, OS X update to the latest version: How can I update to OS X and Mac apps - Apple Support.
  • If you do not already done, simply connect / again or restart your Mac.
  • If you back up the contents of the source that lies in the external devices, make sure they are all operational, mounted and available.
  • If the last time information and the date are still incorrect, continue with the steps below.
  1. Confirm that a backup is not already underway. Then, scroll down to 'Add or remove backup disk... '. "and select it. Choose 'Data' and then delete.
     • If everything works as it should, this will not affect your existing backup history. However, if you have done this until now it is not working as it should, and in an abundance of caution you should consider creating an additional, redundant backup first. If you work with the data that you just can't live without, that a backup is not enough in any case, even if everything works perfectly.
  2. Then select the drive again, connect you and choose 'Back Up Now' in the Time Machine menu bar icon.
     • If you have added previously any exclusion of the element (under the 'Options... button "), you will need to add.
  3. Time Machine will take a lot of time while it makes a 'deep event' scan to determine which files need to be backed up. Meanwhile "preparing backup...". ' appears in Time Machine preferences.
  4. When the "scan deep event" is over, Time Machine will perform a normal incremental backup, which will have the usual amount of time.

  That should correct the erroneous information.

• Disagreement with Firefox 3, Firefox 4 does not register the tabs open when I leave to have several tabs open. How can I do this in Firefox 4?

  In Firefox 3, when I got to close the program to have several tabs open, Firefox asked me if I wanted to save and remember the tabs open, so that I can get them at the next restart of Firefox. Firefox 4 is no more. Is it because I have have not properly set up somehow, or is this normal? How can I recover this function?
  Thanks in advance,
  Andrea

  A Firefox 4 is from Firefox showing the default warning message will stop, but it can be turned on again by changing some preferences.

  1. Type of topic: config in the address bar and press on enter
  2. Accept the warning message that appears, you will be taken to a list of preferences
  3. Find browser.tabs.warnOnClosepreference, if its value is set to false, double-click on it to change its value to true
  4. Repeat this for 3 preferences browser.warnOnQuit, the browser.warnOnRestart and the browser.showQuitWarning

• Disk Manager does not register E:

  Normally when I insert the disk my camera SD to get a little menu asking what I want to do with these files.  Today, I don't get that. Last time it worked propoerly was two days ago.  It is not a new drive, even if it has been reformatted after the last time that I took the pictures off it.  It is not a new camera.  When I put the disc in the computer [Dell Inspiron 1520, XP SP3] nothing happens.  If I go into my computer, drive E is not listed.  If I look at the Disk Manager (rt - click my computer) the drive E is not listed under storage devices.  Where at - it go?  I want very much to get these pictures from the disc and my computer.

  Thank you

  From your description, I guess that the SD card reader is integrated on your computer. Is this correct?

  • You have another SD card in the Player embedded on this computer? If so, what happens?
  • You have another SD card drive (be it for this computer or on another computer) to enjoy this SD card? If so, what happens?
  • The SD card works OK in your camera (i.e., can see you all the pictures you've taken)?

  It seems that if your card reader is dead.  Open the Device Manager (start > run > devmgmt.msc > OK) and see if there are icons next to one of the notices.  If there is, double-click on the entry and report what appears under the "device status", as well as the camera model name/number.

  As a solution, either connect your camera directly to the computer with the USB cable that should have been provided with the camera or purchase an external SD connected by USB card reader (these are not very expensive).

• My computer does not register my desktop settings.

  Whenever my computer restarts, stop or goes into sleep mode setting I have on my desktop disappear. This product even when I hit apply the settings. How can I solve this?

  It is possible that your user profile has become corrupted in the past.  When this happens, Windows connect by using a temporary profile whose settings will disappear between sessions.  To test this, create another user on your computer and open it as a new user and see if the same problems occur for this user.  If they are not, then treat your original login as a corrupted profile and go through the steps to recover your corrupt profile:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• After you install the service Pack 2 of my dvd does not register

  Need help

  Hello

  Maybe you had the wrong key - becareful with O, o and 0 letter upper and lower case O and 0 zero
  as well as everything - in the code.

  Control Panel - System - watch downstairs for the Product Code, which can take a few minutes to appear.

  These are not cracks - they find your product key on your machine.

  Vista product key
  http://www.Vistax64.com/tutorials/85023-product-key-number.html

  Magic Jellybean Product Key Finder see Web site for many products.
  http://magicaljellybean.com/KeyFinder/

  Finder Windows product keys
  http://www.rjlsoftware.com/software/utility/winproductkey/

  Window Vista and product keys Microsoft Office - WinGuggle
  http://unlockforus.blogspot.com/2008/01/WinGuggle-get-your-Windows-Vista.html

  How to see the Vista product key
  http://www.Vistax64.com/tutorials/85023-product-key-number.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.