HP P6540f - BIOS doesn't support AHCI for newly installed SSD with OS Win 7

Similar Questions

• Wrong BIOS in the support page for Satellite A300D

  Hi all
  Half an hour ago, I was searching a driver for my a300d and I found a new bios version 2.80 - win64 02/10/12
  latest version of the bios is 3.30 in 2009
  new versions are always with a greater number... and never after almost 3 years
  I'm not stupid enough to try this 'new' bios, but there are a lot of fish :)
  I hope someone from toshiba service support check this
  Thank you and sorry for my English

  * the problem is solved... There is no more version 2.80 in download list... Thank you *.

  Post edited by: rata

  Seems its solved

• Pavilion dv7-6b78us: software of fingerprint for Pavilion dv7-6b78us with OS Win 10 to the finger

  I need software for fingerprint reader.  Active control panel, Device Manager and it says the drive is running and a driver curent.  Check installed programs and can find t.

  Hello:

  The only suggestion I can offer would be to see if the W10 Simplepass software works on your model.

  This package contains the HP SimplePass Identity Protection software for the notebook models and operating systems. This software protects the identity information and account access using fingerprint of the owner of the computer.

  File name: sp71729.exe

• CC2015/Mac: CXSEvent doesn't have a constructor - newly installed WARNING extension CEP on MACOSX

  

  Some MacOSX users get this error:

  "An attached script generated the following error message:

  CSXSEvent has no constructor

  You want to disable this event handler.

  .. When running our CEP Extension (HTML5 / JS / JSX).

  The user who reported him runs CC 2015.2. The message shows for almost everything she does in the user interface, but most of the actions (maybe all) work despite the annoying message.

  For the first user (it would have been 2014 CC then) with this problem, the error disappeared suddenly. He had not checked the box "don't show".

  It seems that this error is only on Mac. Users running Windows, which I belong is not the issue.

  (There is also an initial "i/o error" for the user, at the start of the application, but that would not have anything to do with the CSXSEvent).

  CEP6 branchezBranchez library is attached, so does not need to load from an external file. We can just use the method showing by Loïc

  var = new ExternalObject MyLib ("lib: PlugPlugExternalObject");

  Have you tried that before doing what you describe in #12?

  If not, try it and see if it works

• RE: What models of Dell supported AHCI and FILLING for SSD?

  NOUSERNAME

  Hi Jonathan:

  ..... Specifically, I wonder if a workstation Dell Precision T3600 can do justice to an SSD.

  Anyone? The motherboard on a Precision T3500 or precision T3600 does support AHCI?

  TIA

  Yes.

  T3600 - AHCI is the SATA Operation (page 41 of the manual) setting.

  T3500 - Info is not in the manual, but the T3500 should have a RAID AutoDetect / AHCI setting in BIOS under Operation SATA.

• A Persario SR1200NX will support a SATA drive. BIOS doesn't have this option

  I am trying to recover data to a SATA drive for a friend, my card mother Persario SR1200NR has connections for the SATA drive but the bios doesn't have the option for SATA drives. I downloaded the latest BIOS upgrade but still no SATA option appers.

  Hello

  The short answer is NO, there only IDE controller.

  Kind regards.

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.

• Satellite R830-143 - update of the BIOS does not support this operating system

  Hello

  I received a notification via Tempro that he did not have a BIOS upgrade. I downloaded the ZIP file (bios - 20120209125153.zip), extract the package (BIOS360_EC140_WIN.exe) and ran it according to the instructions.

  The package runs, give the progress bar "extract files...". ", then displays a dialogue entitled"TOSHIBA BIOS package Ver.4.1.2"that says:"this package BIOS does not support this operating system."

  I am running Windows 7 Home Premium 64 - bit on a Satellite 830R-143 with the short part No. PT32LE

  Does anyone know what is the problem?

  Thanks in advance for your help...

  Hello

  You have problems with the laptop?
  If not then why you want to do the BIOS? Just because the new BIOS is released?
  I would not change anything if my laptop is running correctly.

  However, the update of the BIOS requires the VAP (value added package).
  So remember that this PPV is installed correctly. If this isn't the case, so far.

• I have a Pavilion p6540f. Who will support two monitors?

  I have a Pavilion p6540f. Who will support two monitors? It has outputs two DVI and VGA, but I get conflicting advice in searching for internet information. Should I install a new video card? My 250 watt power supply will support another video card? Thank you.

  Thank you very much for the information and your quick response.  I have a new HP monitor on the way.

  Take care.

• HP Pavilion Notebook N9R33EA # a: problems with the BIOS update (HP Support Assistant)

  I was offered an update of software SP77359, which seems to me to be an update of the BIOS provided by HP Support Assistant. Version F.82Ap1. Two days ago, I updated the BIOS via the support and, on the report wizard got an other update via the support Wizard. I applied this patch to find that it was still an other BIOS update and now, which has been applied this third update has appeared. Please let know us how I do.
  
  The model number of my machine is actually N9R33EA #ABU (as reported by the Assistant to support) but ths was too long to type in the name of the product.

  Your laptop is a HP Pavilion Notebook - 15-ab208na (ENERGY STAR) for later use.

  I wouldn't update. Simply click the X to remove the download and install the list in the help Wizard.

  The current version on your laptop support portal is F.8.1

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/8499306/model/8942501

• Windows XP installation hangs when the BIOS is set to AHCI

  I have Windows 7 on my computer. It has a motherboard Asus P8Z77 - V LX with the AHCI BIOS.

  Now, I would like to install Windows XP to a dual boot set up so that my son can continue to play some of their old games XP.

  When I tried to install XP, I got the BSOD during the first phase of the installation process.

  Internet research, I discovered that Windows needs a controller AHCI driver and that I could use F6 to install the appropriate driver to a diskette during installation or wake the driver in a Windows installation CD using a program called nLite. I chose the latter because there are no floppy drive on the computer. I chose the version XP 32 bit Intel (R) series 7/216 Chipset Family SATA AHCI Controller to wake.

  I used my newly created installation disk and the initial phase of installation is fine, but after the first reboot, just like the Windows XP GUI interface appeared, the system crashed, rebooted and crashed again.

  The only way I could get XP install was to change the BIOS to IDE, then it installed fine. But Windows 7 does not load unless I have change the AHCI BIOS so that's what I've done so far.

  Suggestions as to how I can either get XP to install in AHCI mode or change it to AHCI mode, once it has been installed in IDE mode?

  OK, my apologies, it seems I have didn't read entirely your answer. I have BSOD stop 7B have treated several times and has been guilty of inaccurate "quick read".

  However, I gave you a possibility through response to your last paragraph...

  install the drivers for XP AHCI as it is started in IDE mode, and then change the AHCI BIOS

  .. have you tried this? What were the results?

  After thinking a bit about this possibility, it may be a good idea to restart in IDE mode after installing the AHCI driver before then stopping and switching to AHCI mode.

  As far as I know there are only two possibilities for the installation of the AHCI driver when installing XP. You dismissed one of them (Setup F6 disk) and you say that the other does not have a bootable system. Maybe you could try to "slipstreaming" once again, in which case the process did not work properly. Where did you get the drivers from making the wake? Was it the same place as the link I posted above? Absence of "slipstreaming" or the purchase of a (cheap) floppy drive, my only suggestion is that I repeated above.

  Finally, can you confirm that it is stop 7B that you get? If not what stop do you receive?

  Tricky

• I am trying to play call of duty world at war, and he said video card or driver doesn't support UBYTE4N vertex data.

  I asked a bunch of people and they said to update. It saids

  Getting Direct3D 9 interface...
  Pixel shader version is 2.0
  Vertex shader version is 0.0
  Video card or driver does not accelerate the transformation and lighting.
  Video card or driver doesn't support UBYTE4N vertex data.

  Error during initialization:
  Video card or driver doesn't support UBYTE4N vertex data.

  Hi Jbrown_98,

  You can download and install the latest chipset and graphics drivers for Windows Vista and check if this solves the problem.

  Here is the link to the Intel Web site to download the drivers:

  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Let us know if it helps.

• How to enable the AHCI for SSD on M6-1010TX laptop computer HP

  HELO

  Have tried to install an EVO of 840 Samsung 240 GB SSD on my laptop of M6-1010TX with WIN7x64 i5/4 GB and running.

  The SSD seems to work OK, but I when I run Samsung magician this is a warning that it must be set to AHCI.

  Also, most of the menu items are grayed out and unavailable in Wizard, so I can't see or adjust all parameters. I don't even know if the TRIM work.

  There is no possibility of setting to AHCI in the BIOS. (In fact there is no provision for seting pretty much anything in the BIOS)

  I've seen a remedy to a similar problem on this forum under 'How to enable AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook' which offers to upgrade to the latest version of Intel RST, which is supposed to give favor SSD attitude to go with the 7 series Intel chipset.

  I already have the updated HP version of installed RST (2012-05-04 11.1.0.1006), but the Intel site has versions up to 13.1.0.1058 in date 27-05-2014.

  Anyone know if these later versions of Intel are safe to install?

  PS - I 840 Samsung SSD EVO running on 2 HP ProBooks's a little older, and they run like lightning.

  A simple setting in the BIOS to enable the AHCI is available on these. Why not in the new M6?

  Thank you

  OK Hüffer---> we have a update

  I had the opportunity to re - install the SSD drive this morning.

  It seems that you were mostly correct, but there is also a bit of a conflict between the Samsung software and HP hardware.

  When I re-installed this time I connected the SSD in USB BEFORE installing the software (Samsung instructions say to connect AFTER insalling software). This has resulted in much better recognition of the SSD and all the options are now available in Sasung magician.

  EXCEPT - 1. He always warns AHCI mode being "Deactivated (IDE or RAID).

  2. it does not recognize the SATA 3 Interface

  HOWEVER - it seems to work quite fantasmagorically FAAAAAAST

  Samsung Benchmark gives random read/write speeds about 30% above their maximum rate quotes

  These reference speeds are about double what I get from the above, 2 HP ProBooks who have SATA 2 interfaces, so it seems that the SATA3 interface actually works correctly.

  I am now very happy with this performance (but I wish that AHCI warnings were not there)

  So the secret seems to be to connect the SSD drive first and do believe not all alerts when the evidence says it actually works OK.

  Thank you once again to Hüffer,

  Hawkeye

• BIOS and HP Support Assistant?

  I am a little appalled and would like to know what is happening with the updated Bios and HP Support Assistant.  To visit this forum, I came to the conclusion that we should NOT allow the HPSA download and install the updates to the Bios.  Is this true and if so, what do you do to solve this problem?  Unfortunately, I learned that this HPSA AFTER put to update my Bios to a version that is not listed for my laptop.  Unfortunately, not a not inform me on what I should do after it has happened.  Should I try and "exploded" my Bios?  Or leave?  I appreciate all help.  I now f.2bs and according to the download site for my model number, I use f.0Une.  My laptop is a Pavilion DV6T-7000 Quad Edition A5F76AV.

  Problem solved.  I decided my BIOS of backflash called for on site support (drivers and downloads).  Everything is fine and it even fixed some Diagnostics UEFI.  After seeing things, I found that HPSA does not have a very good job of distinquishing your operating system.  In my case, whenever HPSA tells me an update of the BIOS, it applies generally to 8 Windwos.  I am running Windows 7.  Meh.

• AHCI for Dell Inspiron 530

  Hi, I just installed a Samsung 840 EVO 250 GB in my Dell Inspiron 530 (Quad Q6600) running under Win 7 32 bit. BIOS version 1.0.18 (latest version) the SSD works really well, giving the startup time much better than with the previous hard disk. However, I am under IDE and AHCI is not enabled. 1. it will make much difference to the performance of the SSD if I'd be able to get the AHCI running on my system? 2. If so, how can I get the AHCI to work? Thanks for your help!

  It will not make much difference, but it will make your system more efficient.