Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

Similar Questions

• External monitor works only with the Macbook Pro?

  I just bought a Macbook Pro 15-inch (mid-2015, OS X El Capitan 10.11.4) and planned to connect it to my BenQ GL2450HM (he had since worms 2011 for my Windows PC). I had a DVI adapter for them, but the card connects to the cable correctly (as it goes down easy) and then when I plugged it, the monitor gave me a green light for a bit, but finally displays 'no signal' and the screen went black, and yellow light. But when I pulled the cable out of my monitor, he said "no cable not connected" (implying that he entered the connection somehow before that?)

  So, I read while holding down the option key to detect monitors, but that did not work. Put the laptop to sleep and then wake it up didn't work either. I also tried to plug the adapter to DVI/VGA Converter that I have, but they fit together. I tried to plug the adapter directly to the DVI port on my monitor, but they are not at all together.

  I feel, it should be possible to make the Macbook and monitor work together, but I'm stuck to know exactly what needs to be fixed. Probably the adapter or DVI cable, however. Do you have any suggestions?

  I don't see that this is not possible, so I am that give a bump.

• Hello everyone. I recently installed a Samsung SSD (hard solid state drive) in my destop PC. For some reason any Lightroom do not see? So I can't ingest pictures of her, or copy photos from a card itself. It is not listed as a player option. See LR

  Hello everyone. I recently installed a Samsung SSD (hard solid state drive) in my destop PC. For some reason any Lightroom do not see? So I can't ingest pictures of her, or copy photos from a card itself. It is not listed as a player option. LR sees any other drive. My computer he sees very well, so I was able to create a catalog it. IM using windows 8.1. Any ideas? I would also add that this drive has become corrupted and was repaired by Samsung. Maybe they did do a very good job......

  Did receive the disk with the letter of A: or B: drive? See below, which deals with the question:

  Re: lr 4 does not display the new hard drives > 2 TB

• 2009 Mac Pro is plant after the boot Samsung 850 Evo 250 GB drive upgrade

  The system seems to hang mysteriously every two weeks. It restarts every time login screen. I tried to run DiskWarrior 5.0 on the system, but it doesn't seem to help.

  I've been thinking out the disc and its replacement with an OWC (mercury Accelsior E2) or a conventional hard drive. Another option could be upgraded to the latest OS X Server 5.0.3.

  2009 mac Pro

  Mac OS X Server 10.6.8 - stock (no Trim Enabler)

  8-core 2.26 GHz, 6 GB RAM, nVidia GeForce GT 120

  Highpoint RocketRAID 2314

  Interval since the last report of panic: 734359 sec

  Panic since the last report: 1

  Anonymous UUID: E2906FE3-AD37-43A4-9D1C-5D313A9E42B5

  Fri Jan 15 20:55:31 2016

  panic (the appellant 2 cpu 0xffffff7f80cc8b4d): "AppleAHCI: location (0) reused, newFIS = 0xaaef8027: 0x00000000: 0x00000000: 0x00000000, currentFIS = x 0 00358027: 0x403cb6a0: 0x00000000: 0x00000010, PxCl = 0x00000000 PxSact = 0x00000000\n"@/SourceCache/AppleAHCI/AppleAHCI-217.0.5/AppleAHCIPort.cpp:2801.

  Backtrace (2 CPU), Frame: Return address

  0xffffff8087943b00: 0xffffff8000204d15

  0xffffff8087943c00: 0xffffff7f80cc8b4d

  0xffffff8087943c90: 0xffffff800053c225

  0xffffff8087943d00: 0xffffff7f80cc71b9

  0xffffff8087943da0: 0xffffff7f80cbce8d

  0xffffff8087943dd0: 0xffffff7f80cbd29a

  0xffffff8087943e50: 0xffffff7f8117325d

  0xffffff8087943e90: 0xffffff7f811738e9

  0xffffff8087943eb0: 0xffffff7f8117348c

  0xffffff8087943ed0: 0xffffff7f811768f0

  0xffffff8087943f60: 0xffffff8000285b66

  0xffffff8087943fa0: 0xffffff80002c8527

  Extensions of kernel in trace (with dependencies):

  com.apple.iokit.IOAHCIBlockStorage (1.6.4) @0xffffff7f8116e000-> 0xffffff7f81182ff f

  dependency: com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000

  dependency: com.apple.iokit.IOStorageFamily (1.6.3) @0xffffff7f80d59000

  com.apple.driver.AppleAHCIPort (2.1.7) @0xffffff7f80cc2000-> 0xffffff7f80cd8fff

  dependency: com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000

  dependency: com.apple.iokit.IOPCIFamily (2.6.5) @0xffffff7f8081d000

  com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000-> 0xffffff7f80cc1fff

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  10K 549

  Kernel version:

  10.8.0 Darwin kernel version: kills Jun 7 16:32:41 PDT 2011; root:XNU-1504.15.3~1/RELEASE_X86_64

  Name of system model: MacPro4, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 130647334321206

  discharged kexts:

  com.apple.driver.AppleIntel8254XEthernet 2.1.3b1 (0xffffff7f80f07000 addr, size 0 x 118784) - last unloaded 87066847159

  kexts responsible:

  com Highpoint - tech.kext.HighPointRR 1.1.1

  com.apple.driver.AppleHWSensor 1.9.3d0 - last load 26409548610

  com Apple.nke.PPTP 1.5

  com Apple.nke.L2TP 1.5

  com Apple.filesystems.autofs 2.1.0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 100.12.31

  com.apple.driver.AppleMikeyHIDDriver 1.2.0

  com.apple.driver.AppleUpstreamUserClient 3.5.7

  com.apple.driver.AppleMCCSControl 1.0.20

  com.apple.driver.AppleHDA 2.0.5f14

  com.apple.driver.AppleMikeyDriver 2.0.5f14

  com.apple.driver.AudioAUUC 1.57

  6.3.6 com.apple.GeForce

  com.apple.driver.AppleUSBOpticalMouse 3.7.5

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AudioIPCDriver 1.1.6

  com.apple.driver.AppleIntelNehalemProfile 11

  com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1

  com.apple.driver.AppleLPC 1.5.1

  com.apple.driver.AppleRAID 4.0.6

  com.apple.iokit.IOAHCIBlockStorage 1.6.4

  com.apple.driver.Oxford_Semi 2.6.1

  com.apple.iokit.SCSITaskUserClient 2.6.8

  com.apple.BootCache 31.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

  com.apple.driver.AppleFWOHCI 4.7.3

  com.apple.driver.Intel82574L 2.1.8b1

  com.apple.driver.AppleUSBHub 4.2.4

  2.1.7 com.apple.driver.AppleAHCIPort

  com.apple.driver.AppleEFINVRAM 1.4.0

  com.apple.driver.AppleUSBEHCI 4.2.4

  com.apple.driver.AppleUSBUHCI 4.2.0

  com.apple.driver.AppleHPET 1.5

  com.apple.driver.AppleRTC 1.3.1

  com.apple.driver.AppleACPIButtons 1.3.6

  com.apple.driver.AppleSMBIOS 1.7

  com.apple.driver.AppleACPIEC 1.3.6

  com.apple.driver.AppleAPIC 1.4

  com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0

  com Apple.Security.sandbox 1

  com Apple.Security.Quarantine 0

  com 2.1.14 Apple.NKE.applicationfirewall

  com.apple.driver.AppleIntelCPUPowerManagement 142.6.0

  com Apple.nke.PPP 1.5

  com.apple.driver.AppleProfileReadCounterAction 17

  com.apple.driver.DspFuncLib 2.0.5f14

  com.apple.driver.AppleProfileTimestampAction 10

  com.apple.driver.AppleProfileThreadInfoAction 14

  com.apple.driver.AppleProfileRegisterStateAction 10

  com.apple.driver.AppleProfileKEventAction 10

  com.apple.driver.AppleProfileCallstackAction 20

  com.apple.driver.AppleSMBusController 1.0.10d0

  com Apple.NVIDIA.nv50hal 6.3.6

  6.3.6 com.apple.NVDAResman

  com.apple.iokit.IONDRVSupport 2.2.1

  com.apple.iokit.IOFireWireIP 2.0.3

  com.apple.iokit.IOSurface 74.2

  com.apple.iokit.IOBluetoothSerialManager 2.4.5f3

  com.apple.iokit.IOSerialFamily 10.0.3

  com.apple.iokit.IOAudioFamily 1.8.3fc2

  com.apple.kext.OSvKernDSPLib 1.3

  com.apple.driver.AppleHDAController 2.0.5f14

  com.apple.iokit.IOGraphicsFamily 2.2.1

  com.apple.iokit.IOHDAFamily 2.0.5f14

  com.apple.iokit.AppleProfileFamily 41

  com.apple.driver.AppleSMC 3.1.0d5

  com.apple.driver.IOPlatformPluginFamily 4.7.0a1

  com.apple.driver.AppleSMBusPCI 1.0.10d0

  com.apple.driver.AppleUSBHIDKeyboard 141,5

  com.apple.driver.AppleHIDKeyboard 141,5

  com.apple.iokit.IOUSBHIDDriver 4.2.0

  com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3

  com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3

  com.apple.iokit.IOBluetoothFamily 2.4.5f3

  com.apple.driver.XsanFilter 402.1

  com.apple.driver.AppleUSBMergeNub 4.2.4

  com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8

  com.apple.iokit.IOUSBMassStorageClass 2.6.7

  com.apple.driver.AppleUSBComposite 3.9.0

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0

  com.apple.iokit.IOFireWireSBP2 4.0.6

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8

  com.apple.iokit.IOBDStorageFamily 1.6

  com.apple.iokit.IODVDStorageFamily 1.6

  com.apple.iokit.IOCDStorageFamily 1.6.1

  com.apple.iokit.IOFireWireFamily 4.2.6

  com.apple.iokit.IOSCSIParallelFamily 2.1.1

  com.apple.iokit.IOAHCISerialATAPI 1.2.6

  com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8

  com.apple.iokit.IONetworkingFamily 1.10

  com.apple.iokit.IOUSBUserClient 4.2.4

  com.apple.iokit.IOAHCIFamily 2.0.6

  com.apple.iokit.IOUSBFamily 4.2.4

  com.apple.driver.AppleEFIRuntime 1.4.0

  com.apple.iokit.IOHIDFamily 1.6.6

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.security.TMSafetyNet 6

  com.apple.driver.DiskImages 289.1

  com.apple.iokit.IOStorageFamily 1.6.3

  com.apple.driver.AppleACPIPlatform 1.3.6

  com.apple.iokit.IOPCIFamily 2.6.5

  com.apple.iokit.IOACPIFamily 1.3.0

  Model: MacPro4, 1, MP41.0081.B07 of BootROM, 8-Quad - Core Intel Xeon processor, 2.26 GHz, 6 GB, MSC 1.39f5

  Graphics card: NVIDIA GeForce GT 120, GeForce GT 120, PCIe, 512 MB NVIDIA

  Memory module: global_name

  Bluetooth: Version 2.4.5f3, 2 service, 12 aircraft, 1 incoming serial ports

  Service network: Ethernet 1, Ethernet, en0

  Service network: Ethernet, Ethernet, 2 in 1

  PCI card: scsi, sppci_scsi_bus, slot-3

  PCI card: NVIDIA GeForce GT 120, sppci_displaycontroller, Slot-1

  Serial ATA Device: HL-DT-ST DVD - RW GH41N

  Serial ATA Device: Samsung 850 EVO 250 GB, GB 232,89 SSD

  Serial ATA Device: WDC 1.82 TB, WD2002FAEX-007BA0

  Serial ATA Device: ST31000528AS, GB 931,51

  Serial ATA Device: ST31000528AS, GB 931,51

  SCSI device: Equipment of SCSI target @ 0

  SCSI device: Equipment of SCSI target @ 16

  USB device: Keyboard Hub, 0x05ac (Apple Inc.), 0 x 1006, 0xfd300000 / 3

  USB device: Apple USB Optical Mouse, 0x05ac (Apple Inc.), 0 x 0307, 0xfd310000 / 5

  USB device: Apple keyboard, 0x05ac (Apple Inc.), 0x024f, 0xfd320000 / 4

  USB device: USB-SATA Bridge, 0x067b (Prolific Technology, Inc.), 0 x 2773, 0xfd100000 / 2

  USB device: CRCA102 * AF1, 0 x 0764 (Cyber Power Systems, Inc.), 0 x 0501, 0x1a200000 / 2

  USB Device: Hub BRCM2046, 0x0a5c (Broadcom Corp.), 0 x 4500, 0x5a100000 / 2

  USB device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0 x 8215, 0x5a110000 / 3

  FireWire devices: built-in_hub, up to 800 Mb/s

  FireWire device: G-DRIVE, HGST, up to 800 Mb/s

  The panic occurred because the queue of the AHCI is truncated. Thus all things SATA are immediately suspect.

  These extensions on the "scene of the crime" are used ordinary ACHI drivers for SATA drive.

  In your added kernel extensions, you have an additional driver for RocketRAID. If possible, you should remove only while debugging this problem. It was not explicitly on the "crime scene", but it may have made changes that caused the instability.

  In addition, readers could be involved in this problem, as a failed drive can spray data in the wrong section of memory, rewrite of things.

• BlackBerry Z10 PrintToGo works only with the new version of OS 10

  Am unable to load files using PrintToGo from the new version (10.1.0.4181) installed.

  Worked fine with the previous version and works with the Playbook (2.1.0.1526)

  PrintToGo error log:

  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.BeginConnect (using ServerIP:192.168.2.102, ServerPort:80)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - TCPClient.EndConnect)
  PrintToGoDesktop.exe Information: 0: 09/02/2013 11:33:52 - connected successfully!
  PrintToGoDesktop.exe error: 0: 09/02/2013 11:33:52 - Z10 (2ABE5757) cell phone: EXCEPTION RAISING - System.NullReferenceException: object reference not set to an instance of an object.
  on the EDGE. PrintToGo.UserInterface.Device.UploadPDFFile (String fileTransferURL, String fileName, BackgroundWorker bw, DoWorkEventArgs e)
  PrintToGoDesktop.exe Information: 0: temporary removal PostScript file 'C:\Users\Paul\AppData\Local\Temp\PtB1360.tmp '.

  Resolved, had to repair the Z10 with the PC!  Would have thought that upgrading software would have saved the environment so that this step was not necessary (played with this for several weeks and market).

• Xtreme JBL bluetooth does not work with the macbook pro

  I am currently using a MacBook Pro (13-inch, mid-2014, retina), OS: El Capitan 10.11.3.

  When I tried my new JBL Xtreme bluetooth with my macbook pro or even macbook air matching, it can only go up pair. When I play music on my macbook pro/air, however, there is no music coming out of speakers JBL Xtreme, even if it is coupled.

  However, I am able to pair and play music from my iphone 6.

  Can you suggest how to solve this problem?

  When coupled if you go to System Preferences > sound > output is the BT listed and selected as output device?

• Current applications will work ok with the iPad Pro?

  I use a number of applications for the conduct of instruction - which are designed to move objects... will be they work well with the new iPad Pro... ?

  They should be. Other that a processor more the biggest difference between an older iPad and the pro is screen size.  and I imagine the apps dimensionnera upward for the pro.

• DeskJet F4180: F4180 driver works only with Windows 10

  Printer prints all bad, except the dark colors. Turns red magenta, green is dark blue etc.

  Printer worked fine with win xp.

  Test page prints perfectly without error

  Using the prints to photocopy an exact color copy - it's just data coming directly from the computer which is incorrect, so the work of does'nt driver properly with win 10. I checked that I have the latest version of the driver 6.1.7600.16385.

  I have noted this problem has already been spotted upward - when a new driver is available?

  or can anyone suggest a work around.

  Printer I tried with my laptop win10 and the fault has been the same.

  Printer I tried with my old desktop winxp and the rift was healed - perfect impression of a jpeg file.

  Reconnected printer back on my desk win10 and printed on the same jpeg file and printing was perfect!

  Have you tried a few other files that I had problems with and prints are very well - can only be assumed that the problem was down to the usb connector.

  Thanks for the help

  Concerning

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• TOSHIBA external drive works only with Macbook

  Hello

  I have a 1 TB external drive that I used on my 2007 Macbook without problem until recently when he decided suddenly stop working. Nothing has been changed in the Macbook, I read in some places that there is a problem with enough power of drawing from the usb port to power the player, but have you tried going through a usb port and using a longer replacement cable...

  All advice welcome!

  Thank you

  The question is: is this just a problem of USB connection or maybe the HARD drive starts to crime

  I mean, early or late each HARD drive is going to die, and it's just a matter of time and usage of HARD drive

  I recommend you to connect this drive external DRIVE on another computer just to check if it will recognize

  but to be honest, the question smells like a hardware malfunction.

• USB 2.0 Slim Portable optical drive works only with Windows 8

  Hello

  I recently bought an external optical drive (USB slim portable optical drive;) DVD + RW/BLU-RAY disc). When I plugged in my lenovo with windows 8. the computer does not even recognize any device connected to it. The optical drive does even turn on. I don't know if it's a problem with the player or what he is.
  I would apreciate for this assistance.

  Hello

  It is possible that the drive is faulty, but there may be a setting of conservation of power on your laptop, originally a problem as well...

  If you go to Power Options... 'Change Plan settings' on the right in blue text... then 'Change advanced power' also in the blue text, you will get a window where you can change the default power settings.

  You can temporarily disable or modify everything related to your USB...

  You can also go to Device Manager... 'Bus USB controllers' and see if you can determine what Hub or your disk controller is attached to and temporarily disable power save...

  Maybe it's that your computer does simply not provide enough power to the drive...

  Can you pass the cables to different ports to see if that helps?

  USB 3.0 ports supply more power, is that you have a...

  You have all the gadgets AC adapter that power via a USB connector, you can try?

  You could try a friends computer or something for a simple test...

  When USB powered external drives first came out, there were many problems with insufficient availability. Even after the use of two Sockets USB problem remained to a lesser extent...

  USB 3.0 has a higher power to try to resolve many of these issues.

• My Wacom Graphire4 graphics tablet works only with the pen pressure, OK in CS5 but not CS6...

  I am Windows 7 Professional 64 bit and still have the CS5 and CS6 64 bits loaded.  I've used my tablet with stylus Graphire4 with CS6 will detect all problems.  All of a sudden it only works with the pen pressure even if the stylus pressure is off.  I'm trying to use it as a mouse and frequently use shift/click when you change a mask.  I can do it no longer.  If I run CS5 the pen works as it should but not CS6.  When I first open the CS6 with visible brush the brush palette shows a hard brush, but when I open a file it turns into sensitive pressure without measure by me.  I have reset the brushes, re-installed the driver and finally downloaded a driver more but the problem persists.  Because it works very well in CS5 but not CS6 it must be a problem to Adobe.  It's very frustrating.  I enclose a composite image showing what happens to the CS6.  The right side shows what looks like the brush palette until I open a file.  The left side shows what happens when I open a file.   Even if I do not open a file and make changes within the brush palette, it immediately turns to pen pressure.  It's very strange.

  I would of course someone can provide information that could help.

  Kind regards... Ralph

  

  No answers, but in the meantime, I have come into contact with Adobe.  Problem has been resolved by phone.  Resolution is to delete the preferences file reopen CS6, date at which the PS automatically creates a new preferences file.  It was she, corrected a problem... Ralph

• Magic Mouse works only with the latest el capitan

  Why Apple is not the problems with El Capitan (10.11.6) and it's Magic Mouse? The only way is connected to my MacBook Pro is to remove the com.app.bluetooth.plist at the end of each session and even that does not always work. When it is finally connected, the mouse connects and reconnects constantly during the session. The mouse is an Apple product, and Apple does not seem to recognize the problem or give anyone a viable solution.

  Determine that the problem is inherent in the software is an act of faith (there is no batches of messages here with the same problem).

  Try resetting the SMC and the NVRAM.

  Barry

• GPIB analyzer works only with the Trace of e/s on the same computer

  Following the advice on the basics of knowledge I want to capture Trace IO simultaneously with the

  Capture on the field PC Analyzer.  This is because I have to go on a customer site and only want to

  capture non-intrusive traffic GPIB.  The IO Trace does not capture the field of PC that has the GPIB +.

  card.  When I run IO path on the Test PC, it works fine.  However, I want to avoid encroaching on the

  Setting up clients to say IO Trace Facility.

  If I run a basic series write and read VI. EXE on the PC in the field and to perform only IO capture of this

  works fine (no instrument not attached - just to make sure IO Trace works on PCs in the field).  If I run the NOR

  draw on its own on the field PC, then run the Test PC controlling Instruments, IO Trace is

  does not work.

  At this point, I wonder if Analyzer and IO Trace can not run simultaneously on the same PC?

  OR Trace does not work with GPIB cards +?

  Help much appreciated.  Thank you

  Trace of e/s OR and GPIB Analyzer can be run on the same computer, but not in the way you want.

  The GPIB analyzer is actually a Logic Analyzer, which "listens" for all lines GPIB directly from hardware. For this reason, it can be run from any computer connected to your GPIB topology, even it is not involved in the transers. This allows almost completely corner the bus logging.

  Trace IO OR works with drivers OR Save function calls that are made. These function calls can only be captured the system where they are called, therefore NO IO Trace should run on the test computer. Trace IO NOR will always be a small impact on the time where the test system, due to the time it takes to connect to each call.

  -Jason Smith

• showacls works only with the unc on windows 2008 servers paths

  Hi people!

  We use the command showAcls.exe to the folder list ntfs permissions (we then use this list for some internal processes).  It worked well UNTIL we have upgraded a server to Windows 2008.  When we have a command like:

  showacls \\fs05\Userhome_45\brian-ba

  It returns nothing. No error, no data, just returns to the command prompt.   Needless to say that this command worked fine until the \\fs05 server has been upgraded.  I have found that if:

  I put a copy of showAcls.exe on the \\fs05 server and remote control and then in the server AND reference the full physical path, it will work.

  rcmd \\fs05 s:\showacls "s:\HO_USR1\User_Data_Processing\Userhome_45\brian-ba" / s

  Everyone knows this? Or am I the only one still using showAcls.exe?

  Would love to hear of a workaround

  Thank you!

  Hi BRIANBALSTER,

  Your question in Windows Server 2008 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer