Samsung EVO850 plus disk Util is not smart

Similar Questions

• Disk utility does not see an external drive on my network

  I'm trying to reformat the external drive that I use for backup on Time Machine, but disk utility does not see it. She appears in the Finder as a shared drive. I use OS x 10.11.6. Thank you.

  Disk utility is not supposed to see the network drives.

  If it's a USB, connect it to your computer.

  If it's an Ethernet or wireless, using a utility specifically designed for this.

  (145027)

• Why Techtool and disk utility reports different SMART status?

  my laptop sometimes starts the sign of prohibition, and some start successfully.

  I guess it's the HARD drive, that this assumption holds up to what otherwise. All the Apple hardware test has passed including the extended version.

  the image below illustrates the tool of technology S.M.A.R.T status report is a failure because of "current pending sector count", while the State SMART Disk utility report is checked.

  who should I believe? or should I suspect the flex cable?

  

  

  Hi chemotkbiloIn, first of all save all your data now. I would tend to believe TT. But you don't have to guess, the best way to find out would be to bring your Mac to any Apple store for a free evaluation.

• Disk utility will not let me click on the partition.

  I've updated to El Capitan, disk utility since refuses to let me click on partition.

  Accidentally, I partitioned my disk flash before I updated and so I need to cancel, because now I have 200 MB of storage on it.

  I tried using terminal but I have been unable to fix this way, too.

  Can someone help me with this?

  Thank you

  Make sure that all your files are backed up. Accidents happen and I'd hate for you to lose all data.

  Are you trying to repartition the boot disk? If I understand correctly, your hard disk is currently partitioned, and you need to recover a single correct hard drive?

  You can't repair the disk hard while you use the hard disk. To get the partition on a single disk, boot from the recovery disc.

  Restart the computer and press immediately on and hold command-R until you see a loading bar, and then release the keys. Once the recovery disc starts, choose your language (if it asks you to) and then again open disk utility. Now, select your hard drive and delete the extra partition. It should tell you "this will not affect your files...". "but if he says that you will lose all data, STOP. Make sure that you remove the extra partition without data on this subject. I'm guessing that it's called "Untitled 1" or something that affects unless you named it something different.

• Disk utility does not not what Time Machine backup connected / file Vault question?

  Hi all

  I'm on Mac OSX El Capitan 10.11.3 (15 d 21) on a Macbook Pro 8.2 (early 2011)

  Previously, when File Vault was not activated I've been able to backup on my external drive for Time Machine (1 TB store Transcend jet) and the drive was visible when opening disk utility no problem...

  Now since I have encrypted my first Macintosh HD using File Vault, my disk utility program will not load when my Time Machine (unencrypted) external backup disk is connected, and I can not back up by using the application Time Machine (the player is simply not visible).

  When my external drive for Time Machine is not connected, my disk utility opens very well and I can see my Macintosh HD all external USB drives.

  I tried to re-boot, I tried to disconnect all external devices, I tried to connect the Time Machine drive with two USB ports and I tried to open the first disk utility, and then connect the external drive for Time Machine without success.

  Anyone else have experience with this problem or something similar? Any help and advice would be greatly appreciated.

  Thank you very much!

  Connect your Time Machine backup disk

  Open a Terminal

  Diskutil type: list

  Paste the results

  Should look like this screenshot.

  

• Disk utility OSX not letting u/c partition names

  I recently changed the HARD drive on my Macbook Pro to a crucial SSD 1 TB.  At the time I thought that the HARD drive was faulty so used the Mac online recovery to reinstall the original OSX (Mountain Lion).  When I appointed the SSD partition it only let me use the upper case for the name of the partition.   I had already improved Cougar to the Mavericks so there were a few problems with some on application data, so I decided to do a new install directly from Time Machine.  This good all looked and noticed that Time Machine renamed partition SSD the original name of the disk partition HARD and that this name was a mixture of upper case and lower case letters.

  After that, I decided it would be useful to have a second external USB backup drive, but for the second disc I tried to partition the drive into three partitions all formatted in Mac OS X extended (journaled).  More utility disk once only would allow me to only use capitals in partition names.

  Since OSX is happily using the partition with uppercase letters and lowercase names I'm puzzled what disk utility is forcing me to use uppercase letters.  The only thing I can think is that SSD and USB disk could have been previously formatted with FAT32 and it was inhibiting the disk utility.  Does anyone have ideas better?

  Here's the new disks that are not configured for Macs. Follow these steps:

  Drive partition and format

  1. open utility disk from the Applications\utilitaires folder.

  2. after disk utility charges select the new SSD entry (this is the entrance Out-bumpy with of the mfgr.) ID and size) in the list on the left. Click the Partition tab in the main window of disk utility.

  3. in the title of the Volume entitled plan set the number of partitions in the menu drop-down one. Click the Options button, set the GUID partition scheme, and then click the OK button. Set the type of Mac OS extended (journaled) format. Click on the apply button and wait until the process is complete.

  Repeat for the USB drive.

• CyberLink recovery disk utility: can not burn to disc when you try the recovery computer

  Hi all

  Recently, my hard drive on my HP Pavilion p6674y was wiped out. I have a new hard drive installed in the computer. I created my own recovery DVDs when I bought the computer first. I started with the recovery discs and all was well until about 70% (on the 2 CD at this stage of 3) and then I got an error "0xe0ef000e.

  I then did some research and have ordered the discs of recovery from HP and then saw that I must download and burn to disc recovery disks Cyberlink utility so that the discs work. I have serious problems this CD to burn. I followed the instructions and when it is to the burning time of the installation wizard CD does not burn. It says on the wizard I'm full and there is a 'yes' 'no' and the button "Cancel". When I hit Yes the computer I currently use just restarts. I then try the disc (even if I can say that it's always empty) in my Pavilion and the checkmark never comes to the top.

  I'm not sure what I'm doing wrong.

  Help, please.

  Thank you

  Hello:

  This utility is not absolutely necessary.

  You only need if the HP recovery discs do not work on your new hard drive.

  I tried to run the file on Windows 8 and it wrong, then I won't be able to help you with that.

  While you wait for your drives HP recovery plant to arrive, you can make your own plain W7 installation media and use that to install W7, so at least you can use your PC.

  Here is how to do this.  My only review of the instructions is not to activate W7, unless you want to. Just skip entered the product key from the COA Microsoft sticker on your PC case.

  You have 30 days to use the program without activating it.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.  SP1 Refresh of media files are the latest ISO files.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

• Disk utility will not erase a CD.

  The button 'Clear' disk utility is disabled when I insert a CD that I burned a podcast this morning.

  Have you used the media CD - RW or CD-ROM?

• Disk utility can not create large image of drive (60 GB) on the network share

  Disc Utiity (Versie 15.0 (1511.3)):

  I am creating a disc from a hard disk image. I want to save the image on a Synology DS414 network share.

  The share is accessible a there is no active disk quota.

  I copied a large file via Finder (384 MB) to the \\partagereseau that works.

  When I try to record a copy of disk sharing (60 GB), I get the following message:

  Unsatisfactory area is available on "(null)" to create the NAME of diskimage. Choose another volume with at least 60 GB of available space and continue.

  Summary: I can create large files on the share, but the disc utilities cannot?

  Greetings Wim

  384 MB is nowadays is no longer considered to be a file of "big."

  You don't mention how much space is actually available on the Synology but for arguments sake, we will assume that more than 60 GB of space is available.

  So in theory it should be possible to create a disk image of 60 GB (no doubt), there is enough space available. As you say there is no set of storage quotas and I'm happy to believe that. I think that the issue could be more to do with the maximum allowed size of the file, remember that I mentioned that 384 is actually not much, although some systems have a limit of 4 GB for a single file, for example FAT32 file systems have such a limit. In theory the FAT32 limit should not apply here because almost all including Synology NAS servers actually use Linux as the underlying software and so use Ext3 or Ext4 as file system, not FAT32. Same Ext2 a fortiori Ext3 or Ext4 allowing individuals will produce up to 2 TB of size which is clearly much larger than 60 GB.

  Still it could be related to that question even if it is necessary as an unnecessary and artificial limit may be for example to ensure compatible with other systems using FAT32.

  If you have enough space on the Mac, you could create and try to copy on the Synology, however another approach which is probably better all around is to create a "sparsebundle disk image. It's a disc image, but another type and will work around this problem because it is in fact made up of lots of all small files attached together. As that user do you see this as image a big drive, but the computer sees it as a folder full of files much smaller.

• (EN) / (РУС) BOOTCAMP + EL CAPITAN DISK UTILITY = BOOTCAMP NOT LOAD

  Sorry myEnglish is bad

  EN
  (1) install BOOTCAMP on maverics

  (2) up to Yosemite > EL CAPITAN

  (3) the right of al

  (4) I wanted more space on bootcamp

  (5) I want: (I create disk of 10 GB EXfat > kill discs EXfat on windos and extendet bootcamp)

  (6) after the fund drive EXfat BOOTCAMP on charge with ALT disappeared

  (7) I try to repair with: (see link and screen RU)

  (8) I try to load the TRAINING camp in OS X recovery (on charge with alt) but I see the instructions (no boot device...)

  (9) for the first see on os x (Tuxera) files botcamp not corrupted

  Help me please...

  RU

  Беда такая: Имею bootcamp еще General времен маверикса, апнулся dizinine ёсмита а потом и dizinine капитана, не много бубна и полет нормальный, но тут мне начало не хватат 40гб на винде решил дисковой утилитой (мака) откусить от macintosh HD эксфатный раздел на 10гб и в винде грохнуть присовокупить виндоразделу расширив его виндоутилитой к и его потом.

  Беда меня настигла после создания диска эксфатного тома дисковой утилитой (мак), после этого при загрузке n alt'ом перестала появляться винда (BOOTCAMP) остался ток мак и его восстановление, пытался решить проблему методом сюда от:http://sourceforge.net/projects/gptfdisk/

  НО ПОЛУЧИЛ ОШИБКУ (НА СКРИНЕ).

  

  Еще пытался загрузиться в восстановление macintosh HD и там выбрал принудительно загрузочным после чего при загрузке получил надпись bootcamp: (no device bootable insert...) НУ И ТД).

  PS из мака диск bootcamp нормально виден и не первый взгляд не повреждены файлы

  ПОМОГИТЕ ПОЖАЛУЙСТА!

  EN > disable SIP http://osxdaily.com/2015/10/05/disable-rootless-system-integrity-protection-mac-os-x /
  It works

  RU > SIP как тут отключил Я http://osxdaily.com/2015/10/05/disable-rootless-system-integrity-protection-mac-os-x /

  После этого GPTfdisc заработал штатно

• Attempt to load Samsung phone mobile disk but is not Compatible with Vista

  I am trying to load a disc to samsung mobile phone, but it is only compatible with windows 2000 or windows xp, my PC has windows Vista Home Basic charge, is there a way that I download the driver of bad to install this drive? Thank you

  Hello

  Samsung has written drivers for their products non-microsoft

  If samsung does not have drivers vista for it to improve the product

  Contact samsung

• External drive is not accessible by Time Machine or disk utility

  I have a USB drive connected on my MAC (OS X El Capitan) the drive has 3 partitions, one is used for bacp of documents (200 GB), empty (300 GB) and for the backup copies made with Time Machine (300 GB). Since yesterday, Time machine does recognize more the drive for the installation of the most recent reserve backup copy, The Time Machine, the disk partition is also not found by Finder and when the drive is connected via USB to the MAC, disk utility does not but rest in mode search, without giving any information.

  The MAC system information indicates that all the three partitions connected via the USB bus, ar

  I can't remove the disks with the indications of the boom, but when I remove them physically a warning I thay sgiven the duisk has been removed as not appropriate.

  I think that something is wrong with the partitioning of the disk, but I see no way to retrieve the disc.

  Does have same problem or if it can indicate a path to a solution of the problem.

  Stop

  Remove all external devices except the keyboard and mouse

  Restart and rest the PRAM

  How to reset the NVRAM on your Mac - Apple Support

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Reconnect the drive (and any other external devices)

  If the disc is not visible in disk utility, you can try to connect to another computer and check it or reformat if all else fails.

  a disc formatted in anything other than extended journaled Mac will not be usable with Time Machine. If you need to reformat the drive in NTFS or FAT or ExFat, format Windows PC then reconnect to the mac, once the drive is recognized, reformat with extended Mac.

  It is also possible that the drive is dead. If it is still under warranty it can be replaced, but manufacturers don't offer a premium-free data recovery. see the manufacturer's Web site. you will need the serial number of the drive.

• Disk utility "restore."

  Hello

  I bought a new external hard drive (let's call it #2), and I wanted to copy one partition on the other (let's call it #1) to it.

  If the partition called 'DATA' of 1 # must be copied in the "FAT CLONE" #2 partition.

  Both partitions were MS-DOS FAT.

  I wanted to use 'Restore' (in disk utility).

  I selected DATA as the source and the CLONE FAT as a destination.

  As I clicked "Restore", I had a doubt, I forgot to copy the data on the DATA before, in the case where something is happening.

  So I cancelled the operation, and now I can't see the DATA more in the Finder. It's still here in disk utility, but he apparently disassembled.

  So my question is: should I just remove and I find once again all my data? That's my guess, but I don't want to spoil what I have some data that is unique, it ... That's why I'm asking here.

  Kind regards

  Laurent

  

  Select the entry that is grayed out for the volume, then click the icon to enter the toolber back. It should reappear on your desktop. So that the process works on the destination volume must be equal to or greater that the target volume. Disk utility does not simply copy files but rather all the blocks on the volume. If the destination volume is not enough big then disk utility will notify you. Then you will need to copy the data with another backup utility such as Carbon Copy Cloner.

• My disk utility has no encryption option.

  I'm trying to format a USB key that I can encrypt.  But my disk utility does not have the drop down option for encryption. Can I have a utility obsolete? OS X El Capitan 10.11.5

  In the Finder, when you attempt to encrypt, I get an error message saying "A Partition GUID (GPT) partitioning schΘma Table is necessary".

  Suggestions please.

  You must format the disk with a Table of Partition GUID.

  You can do if you erase the drive with disk utility. Choose Mac OS extended (journaled, Encrypted) format.

  If you encrypt the drive without deleting the content, it's impossible because it is already formatted with a Table of Partition GUID.

• external hard drive partition in disk utility impossible

  on El Capitan, disk utility does not a new external hard drive partitioning.

  When is this corrected?  Is there a work-around.

  With I TB seagate drive and I cannot partition?  It is not useful.

  Marilyn

  Mac mini end of 2014 2.6 Ghz Intel core i 5

  8GB memory

  El Capitan

  Of course, it does.

  Select the drive:

  

  Set how many partitions:

  

  Click on the Add [+] button once for each partition that you want to add. You can set the size using the size field.

  Before you start to complain about something, it would be wise to get your facts straight.