CyberLink recovery disk utility: can not burn to disc when you try the recovery computer

Similar Questions

• What should I do when I can not enter a password when you try to connect to a wifi network

  I'm currently traveling but I am unable to choose a network from the list of networks that appear.  (I entered it from a family computer.) Then when I click on connect, it takes me to the screen to enter the password.  However, it won't let me type the password.  I tried to copy the password of a MSWord document and it copied 8 nine characters, but still wouldn't let me add the last character.  Any ideas?

  I must point out however that I have just went to Starbucks and was able to connect to their wireless network without having to enter a password, and I don't have a problem connecting to my home network either.  Thanks for your help.

  Jim

  Hi Jim,.

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description, you have problems to access wireless networks.

  This problem may occur if there is some incorrect settings in the network.

  Perform the steps from the link below and see if it helps.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Answer to us if you are experiencing problems with wireless networks or any other problem of Windows, and we would be happy to help you.

  Good day!

  Hope this information helps.

• Upgrading from Windows XP to Windows Vista and now I can not find wifi or when I try to connect to the internet, I get an error, "a cable is not plugged on the network card.

  Wireless connections

  I upgraded my dell vostro laptop 1000 Windows xp to vista and now I can not find wifi or when I try to connect to the internet I get an error, "a cable is not plugged into the card network", "connection to the Local network. Everything worked fine until I upgraded. I noticed in my device manager, the driver for the system controller and core network are not installed. Could it be the problem? Is someone can you please help me understand this?

  Hello

  I noticed that you had created another similar to this question. Have you tried the steps suggested in this post?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/how-do-i-put-WiFi-back-on-my-PC-after-upgrading-to/c9b90ec1-8393-4B57-b4af-2fbeb802af58

  You can also try the following methods and check if it helps.

  Method 1:

  Update a network adapter driver.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Troubleshoot network adapter problems.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

• I get 'no more virtual tiles can be allocated' when you try the filter Shake reduction... anyone know what causes this error?

  I get 'no more virtual tiles can be allocated' when you try the filter Shake reduction... anyone know what causes this error? I always get on each blurry picture, I am trying to do a little better.

  This may result from the way in which the scratch disk is set up. Yo have a separate drive for the scratch?

• I am a teacher in South Australia.  Can I get a discount when you purchase the package Adobe Cloud?

  I am a teacher in South Australia.  Can I get a discount when you purchase the package Adobe Cloud?

  Try https://creative.adobe.com/plans?plan=edu&store_code=au&locale=en

• My administrator accounts will not accept PW administrator when you try to run a program. The IPL is corrent, because I can't lon on the administrator account by using the same PW. Any advice?

  Must be explicit

  Hi Ronnox,

  1. do you receive any error messages?

  2. were you able to use the Admin password before?

  3. did you of recent changes to the computer?

  4. This occurs when you try to access a particular program?

  If this only happens with a particular program, you can try uninstalling and reinstalling the program and check.

  Uninstall a program

  Hope this information is useful.

• Error - Cliché Vol. works do not (0 x 81000202) when you try to use system restore

  Original title: System Restore problem

  Try to do system restore, I get a message 'Vol. Shadow copy does not (0 x 81000202)' I am running Vista Home Premium.

  Hi Grandma of Hawaii,

  1. from when are you facing this problem?

  I suggest you try the following steps:

  Step 1: System Restore that Make is enabled, follow these steps:

  To enable the system restore:

  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  (b) in the left pane, click System Protection.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. to enable Protection of the system for a hard disk, select the check box next to the disk and then click OK.

  Step 2: Make sure that the services associated with the restoration of the system are started and set to automatic, to do this, follow these steps:

  Volume shadow copy, Multimedia Class Scheduler, RPC Remote Procedure Call (), Plug and Play, DCOM Server process Launcher.

  Please follow the instructions below and all above defined services to automatic.

  a. click the Start button and in the search box, type in: Services.
  b. press "Enter" to open the Services window.
  c find above the list of related services and check the status (on the road) and the Startup Type (automatic).
  d. double-click the service to change the status of started and set the startup type to automatic.

  If the problem persists,

  Step 3: The System File Checker (SFC) utility allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt, type sfc/scannow, and then press ENTER.

  Follow the instructions in the link below for more information on scan SFC.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• "Popup error ' A:\ is not Accessible, incorrect function" when you try to read the "A" drive in Explorer.

  When you try to read a disk in the 'A' drive from Windows Explorer, I get a Popup with a white 'X' in a red circle and a message that "A:\ is not Accessible" "Incorrect function" and an OK button at the bottom.  It happens to any disk, formatted or not, with the files or empty.  I replaced the disk drive - no help.

  I don't know if it's a windows setting went crazy or a motherboard problem.  My BIOS seems correct.  If I do a 'fill' of window hardware in administrative tools he tells me that I have data on the disk.

  I have XP - SP3.

  Any ideas-

  go to a command prompt and type "sfc/scannow" (without the quotes) and let it run... see if this is helpful at all.

  Hope do you feel better soon.

• computer does not recognize my ipod when you try to download music

  try to downloasd music on my ipod and the computer will not recognize even the ipod

  Hi maangise,

  I suggest you try the following steps:

  Step 1: Run the fixit provided in the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Step 2: Search for the error code in Device Manager

  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in Device Manager, locate the Bus USB controllers and then double-click the device name.

  3. Locate the Apple Mobile Device USB Driver in this list. In some cases, one of the entries will say 'Unknown' in its name. In other cases, Apple Mobile Device can be attached to a different section of the Device Manager.

  4. under the gaze of general tab for the status of the device for any error code indicated.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-Device-Manager-errors

   

  Try to update the drivers, Click on the driver tab, then click on set to update driver and follow the instructions.

  
  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

   

  Step 3: You can follow the steps mentioned in the link below

  http://support.Apple.com/kb/TS1369

  For more information, see the link below

  http://support.Apple.com/kb/TS1538

  You can check with apple to get help

  http://www.Apple.com/support/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Difficulty 'Not connected' Error Messages When you try to access Web Services

  If you are running on an error message on your printer stating that it is "not connected" when you try to access ePrint or your applications, but you know that it is connected to the internet, it probably just means that the printer does not connect to the server properly.

  Here's the first set of markets, I will try, as they seem to solve this problem deliver half the time.

  • The first thing I'd like to try in this situation is a reboot of the system.
  • First, unplug the power cord at the back of your router.
  • Then unplug the power either to the back of the printer or the wall without it first turn.
  • Wait about 30 seconds and reconnect the power cord to your router.
  • Wait about another 30 seconds and reconnect the printer. It should start back up automatically, but if it is not moving forward and press the power button.
  • Once everything is back running, try to access ePrint or your applications.

  If these steps do not work for you, the next thing would be to establish a static IP & DNS for the printer. Before doing this, you want to print a Network Setup page. It varies from a model, but usually found under settings wireless or in reports in the Setup menu. After that you have this page, follow these steps.

  Before we begin, we need a network with your current connection settings configuration page. To do this, press the button on the front of your printer wireless and press 'Print Info' or 'print the State. " This example displays on a page of configuration of the network, which provides information on what we have to finish the next few steps.

  • After that you have, we will need to access the built-in Web server (EWS) printers. You can do this by entering the IP address of printers (from the Network Setup page) browser press and the address bar type.
  • Once there, press the 'Network' tab at the top of the page. From there, you'll want to click on the button "IPv4", on the f-side of the page. It will be there for wireless and wired, so make sure you click the one for you, but you are connected. If you do not see "IPv4", you should see 'Networking', press and press "Network Address (IP).
  • Then, you click the small round button next to "Manual"IP address", and then fill in the IP address, subnet mask and default gateway using the information available on the network configuration page.
  • For the primary or the preferred DNS server, you will want to enter 8.8.8.8.
  • For secondary school or another DNS server, you will want to write 8.8.4.4.
  • Click on apply and when the message appears saying that the changes have been applied, press 'OK '.
  • Press the power button on your printer, wait that it completely power off and press it again to power it on.
  • After doing this, go ahead and try to activate ePrint again.

  These measures should fix this for you. If they don't, then something else can cause this problem for you. Reply in this thread if these steps do not work, and I'll see if I can help figure you out what might be causing the problem.

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• Adobe Premiere elements 12 will be not open. Crashes when you try to load 'importer quick time. "

  I have windows. I tried to uninstall and reinstall. As I said in the title, it tries to open but crashes when you try to load 'importer quick time. " Help, please!

  the link you show the locations of preference files so you can delete/rename them without having to open the program.

• Disk utility can not create large image of drive (60 GB) on the network share

  Disc Utiity (Versie 15.0 (1511.3)):

  I am creating a disc from a hard disk image. I want to save the image on a Synology DS414 network share.

  The share is accessible a there is no active disk quota.

  I copied a large file via Finder (384 MB) to the \\partagereseau that works.

  When I try to record a copy of disk sharing (60 GB), I get the following message:

  Unsatisfactory area is available on "(null)" to create the NAME of diskimage. Choose another volume with at least 60 GB of available space and continue.

  Summary: I can create large files on the share, but the disc utilities cannot?

  Greetings Wim

  384 MB is nowadays is no longer considered to be a file of "big."

  You don't mention how much space is actually available on the Synology but for arguments sake, we will assume that more than 60 GB of space is available.

  So in theory it should be possible to create a disk image of 60 GB (no doubt), there is enough space available. As you say there is no set of storage quotas and I'm happy to believe that. I think that the issue could be more to do with the maximum allowed size of the file, remember that I mentioned that 384 is actually not much, although some systems have a limit of 4 GB for a single file, for example FAT32 file systems have such a limit. In theory the FAT32 limit should not apply here because almost all including Synology NAS servers actually use Linux as the underlying software and so use Ext3 or Ext4 as file system, not FAT32. Same Ext2 a fortiori Ext3 or Ext4 allowing individuals will produce up to 2 TB of size which is clearly much larger than 60 GB.

  Still it could be related to that question even if it is necessary as an unnecessary and artificial limit may be for example to ensure compatible with other systems using FAT32.

  If you have enough space on the Mac, you could create and try to copy on the Synology, however another approach which is probably better all around is to create a "sparsebundle disk image. It's a disc image, but another type and will work around this problem because it is in fact made up of lots of all small files attached together. As that user do you see this as image a big drive, but the computer sees it as a folder full of files much smaller.

• Can not burn to disc.  Burn the file, can not find the file, what gives?

  43 min, marriage project 2.7 GB . Can't burn the disk, can't find the iso file.  What's wrong?  I worked on it for three weeks.  Several chat sessions, uninstalled EP 11 and 13 of PE.  Reinstalled EP 13.  They say that the burn because of the disc is a known issue.  When I try to burn it to a file or an ISO file, the program says it was successful, but it does not appear in the destination.  I tried shorter test files, etc.  Nothing helps.  Are other people having this problem?

  Václav

  There are several known issues with regard to burn on in elements first 13/13.1.

  The most recent is burn it to disc, folder or ISO Image and not finding the format of the final product.

  Several overcame the issue by examining the problem with and without the preference of the Intel HD Graphics 2000 and higher disable in Edit Menu/preferences/general. And then to go with the choice that worked for them...

  Another issue related to an ISO Image burn when the .iso file has a file size of 1 GB or more. Many have reported that the use of the .iso to produce product results of disc with the player not to recognize the format of the disc.

  First Elements ATR troubleshooting: EP 13: ISO Image File Size question

  There are several cases where Premiere Elements does not recognize the burner in the field of the dialog box to the location of the burner burning, and there are cases where the status field remains with missing media. Many of these cases are not resolved, many try another drive or another drive, for some uninstall / free ccleaner Cross (regular and register cleaner parts) has solved the problem, some go into the video editor.

  Please explore the above and let us know the result. Then we could discuss what then if you have not exhausted all the users, troubleshooting of the possibilities.

  Thank you.

  RTA

• I get an error message that Windows can not find a certificate when I try to use my Verizon's MiFI Jetback.

  I have a Verizon Mi - Fi Jetpack.

  I have a Verizon MI-Fi's Jetpack.  It works fine on my Windows 7 computer, but on this computer (Windows XP with Service Pack 3), I get an error message that Windows can not find a certificate.  It won't let me connect even if it shows excellent signal, etc.  Need help.  Thank you

  Hello

  1. when exactly you get this error message?

  2. What is the model of the unit?

  Check if the device is compatible with Windows XP by referring to the user's manual.

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.