Samsung Mobile USB Remote NDIS Network driver problem woth Windows 8

Hello

I've updated since a Windows 7 PC to a Windows 8 BPC.

Previously, with Windows 7, I had no problem USB modem to connect to the Internet via WIFI to my Samsung Galaxy S3 (or 3G).
With Windows 8 However, I can only attach a few minutes and then the connection is cut. When I watched the driver by using the Device Manager on my PC, I saw the following error message:
"Samsung Mobile USB Remote NDIS Network has a driver problem".

I used PC troubleshooting functionality that does not set it and gave me the following message is displayed:
"The mobile Samsung remote NDIS device USB network adapter lives driver or problems with the material, do not set".

I uninstalled the driver and reconnected my phone via USB, USB port checked attaching who re-installed the driver.
I then the internet connection on my PC for a few minutes before it shuts down again and the process repeats.
I have looked on various online forums and some suggest that the driver in using and liked?

There is no problem of connection and access to my phone via USB, just storage attached to connect to the internet using my phone signal.

I have also contacted Samsung who advised me to contact Microsoft.

Please can you help me?

Thank you very much
Ian Nugent

iannugent,

In case you still have questions, because I had the same problem myself, the pilot would have to stop when the registry was refreshing.  However, he could not find a driver dependent and would not completely load the driver, that "off" your internet connection.

The solution is to

-Open your device manager,

-Find the SAMSUNG NDIS device under network adapters

-Right-click on the troubled device and select Update driver software

-Select Browse my computer for software driver

-Select Let me pick from a list of drivers for devices on my computer

-Select Remote NDIS based Internet sharing devices and click Next

.. .that should be your dependent on engine and you should have no problem thereafter I've not had any since.  In addition, there was no reboot needed.  Windows figured it all as soon as I installed this driver dependent

I hope this helps.

The e

Tags: Windows

Similar Questions

  • Trying mobile home: adapter USB remote NDIS network device knows of driver or hardware-related problems?

    Hi all! don't know not if this is the place to post this, because the phone is new and without further problems, consider a Windows problem.

    I recently signed up for three is a plan with tethering on a Galaxy Note 1, but Windows 8 is having a little keep track of it such as GT-7000 in the folders under computer as it appears then disappears at random, but it is OK for most of the problems, I enabled USB attached to the ticket tethering Android-setting-Tethering and mobile hotspot-USB but no love It just won't save the connection in network and center of shear in Windows :(
    The following help pages watched with no luck:
    https://support.Google.com/Android/answer/168932

    There only by unplugging my wired ethernet is I managed to find the following error message, through correction problem.
    Problem found
    The samsung mobile knows remote NDIS device USB network adapter driver or problems related to the equipment, do not set
    My build, if any:
    Silverstone SST-FT02B-W / Asus Maximus V Gene / Intel core i5 - 3570 k, Samsung 8 GB, Dark Green rock pro 2 / EVGA GTX 780, current high Antec pro 750w / Samsung SSD 830 256 GB, Win 8 pro.

    Hello

    Thanks for the reply.

    If you install new drivers, and you have a problem, restore drivers gives you an easy way to revert to the previous version of the driver in question.

    Feel free to post your request here on the Forums of Windows, we would be happy to help you.

    I had the same problem today: (Sony Vaio Flip 15 w / Win 8.1, Samsung Galaxy S4).

    However, I created my problem trying to use 'VAIO Control Center', which allows the user to screening of certain factors, such as the default printer, based on the network connection.  This software is not "USB" as a source of network and by default to the local network.  On exitting, the software corrupted the registry.

    Roll back the driver as described above restored Internet access through the strap of the USB.  Windows Update has provided the new driver.

    The copy is also placed on the Sony support site.

  • HP 750 055xt: clean install / desire / network driver problem

    Want to 750-055xt. Bought as a refurb. SSD is small, so I put more in and did a clean install with Windows 7 Professional.

    Internet - network driver problem does not connect and I see that the drivers are missing. I tried searching the site, but I can't find the driver.

    It's not a hardware issue because I can put the other drive and it works fine.

    I am struck an impasse with the search tool. I need to copy the driver on another computer to move.

    All of the suggestions.

    Thank you.

    Hello:

    Page for your model motherboard plug indicates that there is a CG-RTL8151GH-Realtek gigabit ethernet card.

    See if the W7 directly from Realtek driver works - 3rd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Driver problem with GalaxyTab 10.1 - peripheral USB MTP has a driver problem: Microsoft Virtual WiFi Miniport has a driver problem

    I just a GalaxyTab 10.1.  Connected to the computer and got the following driver problems: "USB MTP device has a driver problem" and "Microsoft Virtual WiFi Miniport has a driver problem.  What are the corrections?  My automatic updates are up to date.  is it a problem to Microsoft or GalaxyTab?

    Hi David,

    1. have you received any disk software for GalaxyTab 10.1?

    Method 1:

    You can try to start the Fixit material and check.

    Hardware devices do not work or are not detected in Windows

    Method 1:

    You can try to uninstall and reinstall the device.

    a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

    b. Select the USB device and right click on it.

    c. now, select uninstall.

    d. restart the computer.

    Alternatively, you can download the drivers for your Samsung device from following link:

    http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU

    2. What is the error or message code you get for Virtual WiFi Miniport in Device Manager?

    Method 1:

    Alternatively, you can try to reinstall the Virtual WiFi Miniport driver and see if it helps.

    a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

    b. Select the device to Wifi Miniport Adapter, the network adapter and right click on it

    c. now, select uninstall.

    d. restart the computer.

    After the computer restarts, the drivers will be installed automatically.

    Method 2:

    If you're still having problems, then try updating the chipset and network card drivers.

    For more information, you can consult the following articles:

    What to do when a device is not installed correctly

    Updated a hardware driver that is not working properly

    Hope this information is useful.

  • EliteDesk 800 35W G2: G2 EliteDesk 800 35W network driver problem

    Hello

    We have a new EliteDesk 800 35W G2 phone in our office.

    In order to obtain compatible drivers, that I'm wrong.

    The one you suggest the latest network drivers for "G2 HP EliteDesk 800 35W.

    Network driver: Intel (r) Ethernet connection (2) I219-LM

    Pls share me the source for Windows 7 x 64.

    Thanks in advance!

    Pen

    Amala

    Was having the same problem for weeks. Finally found a driver that works with the boot image (6.3.9600) - found on the Lenovo site but works on HP EliteDesk 800 G2. Used download Win7/8.1. No other driver seems to work - get the blank screen because you do not have a work CARD driver (press F8 for CMD and run IPCONFIG).

    http://support.Lenovo.com/us/en/downloads/ds105362

    The driver version is 12.13.17.6

  • Pavilion g6-1d70us network driver problems

    I really need help.i have just installed Windows 7 Home premium on my Hp Pavilion 1d70us g6, but im having problems with its pilots, the Ethernet controller, Bus controller and pci simple communications controller. I can't find these three drivers. I tried to install almost every displayed on the Hp.com drivers network driver. but no cure

    Hello

    Please post the ID number of device here is how you can find.

    In the Device Manager menu, regardless of the way you have to, find the driver that is missing (no yellow question mark).

    -Right-click on it and select "Properties".

    -In the Properties menu, click on the tab "Details".

    -In the Details tab, click the menu drop down and select "Device Id".

    -When you have this submenu opened below, you should see one sentence that contains a couple of things you need.
    -C' is what it would look like for example:
    -PCI\VEN_10DE & DEV_03D1 & SUBSYS_14041565 & REV_A2 (could be a couple extra rows with some similar stuff, but the main things you need are the FRI and DEV).

  • HP Pavilion DV6 3050TX: (low range) wireless network driver problem

    My hard drive and motherboard both damaged so I installed a new hard drive and the motherboard and install a new copy of Windows 7 Ultimate (64 bit). But after installing a new copy of windows, the serious problem that I found are to find the right drivers for the wifi and bluetooth. HP has listed a lot of driver for bluetooth and WIFI but that is just and appropriate is not found. Not my WIFI range is decreased. Whenever need to uninstall the driver and reconnect after a few hours of use. As his 'Problem with access point or wireless adapter' shows in troubleshooting. I also installed a software called "Connectify" what internet part of the computer laptop connect as WIFI Hotspot but same problem the range is extremely low, even I keep my mobile phone or another close HP DV6 3050TX bar signal shows only 2 bars. List of available drivers for HP Dv6 3050TX in the official site of HP 2011 Atheros Wireless LAN Driver (sp52131) Broadcom Wireless LAN Driver for Microsoft Windows 7 (sp48591) Intel PROWireless drivers for Microsoft Windows 7 (sp51096) Intel Wireless drivers for Microsoft Windows (sp53540) Ralink 802.11 bgn (sp52534) only WiFi Driver Broadcom Wireless LAN adapter works for me with low-end but often you have to uninstall and reinstall because a few hours after his stoppage of work as "No Internet access" Please give me a correct version and last updated WIFI Driver for HP Dv6 3050TX

    Hello:

    The photo on your screenshot shows that the Broadcom wireless card is present and functioning properly.

    So, if you are unable to connect to the internet, unfortunately, I won't be able to help you with that.

    That would be the best driver for this card.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  • network drive problem

    Morning, I have a laptop Advent under win 7 and recently Google takes ages to load. In my computer, there is a Z drive with a red top is MEMORYCARD (\\EPSON2BAABD.

    In the system when windows loading tray, a message appears saying: "not able to connect all network drives.

    These could all point to google taking forever to load pages.

    Thanks in advance

    Hello

    Thanks for posting your question on the Microsoft community.

    Thank you for details on the issue.

    This problem may occur because of corrupted or incorrect network settings.

    I suggest using the steps described in the following articles and check if it helps.
    Reference:
    Network convenience stores
    http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

    Using the troubleshooter from network in Windows 7
    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • USB mass storage device driver problem

    I have 64 bit computer purchased new in July 2012, running Windows 7 with a Lexmark Interpret S405 printer.  It has been installed and works well for months and today, I asked a print a page on a Web site, and it would not print.  I received an error message indicating that the printer cannot communicate with the computer.  I tried to delete the request for printing, but the computer did not respond.  So I rebooted it.  After it restarted, I went to devices and printers to check the printer, and there the image representing that she needed troubleshooting.  Tried, but it did not fix the problem.  Then I received another message: USB Mass Storage Device has a driver problem.  Tried to find and install the updates for it, but the info said that the driver was already installed.  Can you help me solve this problem?  I'm not a computer scientist, just a frustrated computer user.  Thank you!

    I asked a question yesterday about an error message that says: USB Mass Storage Device has a driver problem.  This morning I tried unplugging the power to the printer and then plugged back in.... problem solved.  No need for additional assistance at this time.  Thanks anyway!

  • Network driver problem

    Hello

    I use MDT to Windows 7 Professional x 64 sliding for Dell OptiPlex 990 and 9010's. Both types use the same Intel network card, but the 9010 do not have the latest driver for it. I have provided the driver to MDT with the enterprise deployment CABs Dell store hosts free on their site. The problem is the network driver, which works well on the 990, slows down the Windows login in about two minutes and mess-to top the Windows task bar. The network icon is missing from the system tray and whenever I try to adjust the volume, the icon will move under the mouse pointer and unresponsive. This happens on the 990, just the 9010. I tried an older driver for 2011 with no luck. Is there another driver I could try? I also tried to use the same driver, who works on the 990 on the 9010 with no luck. I'm little at a loss to know what to do next. I appreciate any suggestions that anyone can offer.

    Thank you

    Just to be clear, what is an Office 9010 or a 9010 all-in-one?

    The drivers for the Intel Network_Driver_NNGMH_WN_18.1.0.0_A08 990 lists page. EXE for Win 7 x 64, but the drivers of the page for the 9010 desktop lists Intel Network_Driver_N0F78_WN32_16.8.0.0_A00. EXE for Win 7 x 64.

    If the two systems have the same Intel NIC, it seems logical that they would both use the same driver, but Dell did not up-to-date Office page 9010 to the pilot of the most recent list 18.1.0.0 so maybe there is a good reason...

  • How to map network drives for all Windows 7 users

    I'm trying to map network drives in Windows 7.  I did it by the usual method, but readers of network appear only for a single user (Administrator) and they do not appear for other users.  Is it possible to map these drives as an administrator so that all users can see them (instead of each user maps itself)?

    Thanks for your help!

    Hi may 1

    There is no possibility to map the network drive for all users at once.

    However, you can access the mapped network drive other user accounts by using the credentials.

    To access the mapped network drive.

    1. click Start , then computer.

    2. click on map network drive.

    3. now, make a check mark in connect using different credentials.

    4. click on Finish.

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Canon ImageCLASS MF4150 All - in - One Printer Driver problems with Windows 7

    Anyone else had problems with Windows 7 compatible drivers for Canon ImageCLASS MF4150 all-in-one printer?  I downloaded the drivers from the Canon Website, but my computer does not recognize the driver.

    Tried the Canon support? That would be my first port of call...

  • Satellite 2430-101: external USB 2.0 HARD drive problem

    Hello everyone,
    I have Toshiba satellite 2430-101. Recently I bought external 40 GB hard drive. When I connected to my toshiba usb hub, it is said that it exceeds the limit of the power, and I need to detach the external hard drive. When I read these last questions, someone suggested to uncheck the power supply to the usb hub options, but he says always the same. They are someone to help me.
    Concerning
    Sri

    Hello

    Well, in my opinion, this problem occurs if the USB port can't provide enough power.
    In this case, that the USB hub must be connect to external power.

    Good bye

  • Universal Serial Bus (usb) controller - the missing driver problem

    1. Hi all.
    • Name of the product and operating system: HP (Notebook) 15-r003sv - Windows 7 x 64
    • Product no.: G7E53EA #AB7

    This laptop has windows 8 and everything works fine, then I installed windows 7 x 64 and I have problem with the usb ports. they do not work and are of unknown devices

    I tried everything posted on the internet, but nothing.

    How can I find a driver for USB controller for my device?

    Thank you to

    * Also, I installed 3 drivers in my page of devices support for hp drivers (sp66602 etc, under the chipset). It extracts to a folder, I found and run but said the error message "this computer does not meet the minimum requirements for installing this software.

    Hi all!

    The problem is resolved.
    Thank you all to try it.

    Now, the magic software that solved my problem was "pilot identifier. (I didn't know it)

    It can detect unknown hardware ID devices (as you did) and recommends drivers for them.

    The pilot who was the solution has been Intel USB 3.0 eXtensible host controller driver.
    They are different but you choose the one that is compatible with your chipset.

    Pilot identifier recommend correct.

    Installation: Just run a single setup.exe, and that's all!

    Thank again!

  • SanDisk extreme 64 GB usb 3.0 flash drive problem

    Hi, my sandisk extreme USB drive is recognized as a hard disk, which appears in the section hard drives instead of the section of removable storage. I wonder how to solve this problem. Although it does not use normal with this drive, but it's just strange.

    PS. I am using windows 7 ultimate x 64

    SanDIsk was fixed drives and non-removable for awhile when he tried to support Windows 8 MS Go features.  There is no fix or the possibility to design autour.

Maybe you are looking for

  • No chapters after compressor export?

    Hi people, I'm editing old family 16mm film to a customer in a SD NTSC file. The file is modified with several chapters (16 or almost) fully finished. I exported a file of format prores FCX.  I'm doing this because I also give customers a larger file

  • Why is Norton Insight allow me to install Thunderbird?

    I want to install Mozilla Thunderbird but my Norton Insight will not allow him. He said that it is dangerous. What can I do to install Thunderbird?

  • Pavilion dv7-7133nr: touchscreen upgrade

    I have a Pavilion dv7-7133nr laptop. I have touchscreen but I'd like to see if I can switch to one, and where I could find one. Is my product number: B4T77UA #ABA

  • Win7

    Thanks for any info on the cost of the ease of installation of vista to windows 7...

  • Cannot disable the microphone 1 on SX10 TC7.2.0

    Morning! Here, we have a SX10 recently upgraded to TC7.2.0, both microphones work perfectly but the problem we have is we cannot cut the microphone 1 (one internal), we need mute because the codec is somewhat less a screen with speakers to the codec.