Trying mobile home: adapter USB remote NDIS network device knows of driver or hardware-related problems?

Similar Questions

• Samsung Mobile USB Remote NDIS Network driver problem woth Windows 8

  Hello

  I've updated since a Windows 7 PC to a Windows 8 BPC.

  Previously, with Windows 7, I had no problem USB modem to connect to the Internet via WIFI to my Samsung Galaxy S3 (or 3G).
  With Windows 8 However, I can only attach a few minutes and then the connection is cut. When I watched the driver by using the Device Manager on my PC, I saw the following error message:
  "Samsung Mobile USB Remote NDIS Network has a driver problem".

  I used PC troubleshooting functionality that does not set it and gave me the following message is displayed:
  "The mobile Samsung remote NDIS device USB network adapter lives driver or problems with the material, do not set".

  I uninstalled the driver and reconnected my phone via USB, USB port checked attaching who re-installed the driver.
  I then the internet connection on my PC for a few minutes before it shuts down again and the process repeats.
  I have looked on various online forums and some suggest that the driver in using and liked?

  There is no problem of connection and access to my phone via USB, just storage attached to connect to the internet using my phone signal.

  I have also contacted Samsung who advised me to contact Microsoft.

  Please can you help me?

  Thank you very much
  Ian Nugent

  iannugent,

  In case you still have questions, because I had the same problem myself, the pilot would have to stop when the registry was refreshing.  However, he could not find a driver dependent and would not completely load the driver, that "off" your internet connection.

  The solution is to

  -Open your device manager,

  -Find the SAMSUNG NDIS device under network adapters

  -Right-click on the troubled device and select Update driver software

  -Select Browse my computer for software driver

  -Select Let me pick from a list of drivers for devices on my computer

  -Select Remote NDIS based Internet sharing devices and click Next

  .. .that should be your dependent on engine and you should have no problem thereafter I've not had any since.  In addition, there was no reboot needed.  Windows figured it all as soon as I installed this driver dependent

  I hope this helps.

  The e

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Adapter USB to GPIO TI EVM. Dll driver Labview for

  I'm looking for a way to send commands through Texas Instrument USB-to-GPIO using Labview. TI supports only the .dll file. No .h and .c files. So, when I set up "Call library function node" then. DLL is not enough. All nodes are closed.

  
  

• Does not network cards: get the "NIC Intel(r) 82562V 10/100 Network Connection knows driver or hardware related issues." I installed a new adapter Ethernet (Belkin) and it hit the same problem.

  Dell Inspiron 530 with Vista Ultimate Edition with Service Pack 2 installed

  I found a solution for me aleast... I installed windows xp drivers and all works like a charm... "computing" my ____.

• The Qualcomm Atheros AR5BWB222 Wireless Network Adapter adapter has driver - or hardware problems

  It's for my laptop Acer Aspire V3 - 771G who has internet CONNECTION problems. I was able to connect fine until windows 8, now I can only connect using the hard line. I ran a bunch of updates, driver downloads and etc means for this model directly on the Acer website for the upgrade of windows 7 to 8 and I had no chance.  However, this message appears when I try to fix the problems of network adapter "the Qualcomm Atheros AR5BWB222 Wireless Network adapter adapt knows driver - or hardware-related problems".  Any help would be greatly appreciated.

  I FIXED IT ALL! :) Simply drag or type at the top right of your screen to open the SEARCH option. Research of Control Panel. Click MANAGE the DEVICES.  Now, you can either search for the driver who is broken or defective write his name uninstall, and then reinstall it from the web (recommended to go to page creator ex; atheros was mine so I have downloaded from them.)  If you have no W/LAN driver then go to your website of the laptop manufacturers and find the necessary driver for your model :) I HOPE THIS HAS HELPED!

• Error "the network card experiences driver or hardware problems" and "To ensure that your Internet protocol bindings are Correct" on Dell Inspiron 530

  Original title: 'make sure that your Internet protocol bindings are Correct (DELL Inspiron 530 Intel 82562V and Desltop)
  
  I'm doing tech support for the family and I'm stumped. They had a Dell 530 with an Intel 82562V-2 and is no longer connected to the internet.

  ipconfig/all statements

  Hostname...: wayne-PC
  Suffix main DNS...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  That's all. Windows gives errors two errors:

  (1) the card network knows of driver or hardware problems

  (2) check that your Internet Protocol connections are Correct

  I installed the latest Intel drivers and TCP IP settings are checked for V4 and V6. I even went as far to install a new Dynex Ethernet card that gets the same mistakes.

  I even tried the netsh reset ip and netsh winsock reset command. I have no idea what to do next. I searched glasses and found similar problems with the same model of Dell and card, but they have been fixed by rebooting.

  Hi MButIer,

  -How long have you had this problem?
  -Was any change in software because the computer before the show?

  Follow the steps mentioned below:

  Step 1:

  Temporarily disable the antivirus software (and any other security software) and the firewall on the computer as a test. Once disabled check if you can connect to the internet without any error.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall programs.

  Warning

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

   

  Perform a System Restore to a point before the show and check if this solves the problem.

  See also:

  System Restore: frequently asked questions

  If the steps above do not help, the best would be to get in touch with the Internet Service Provider (ISP) for assistance.

  Hope this information helps.

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Wireless USB Netgear 802 network adapter. 11 b

  I have a Dell 8300 Core i7 in running Windows 7 Home Premium and cannot get a wireless adapter usb to work - I have tried both a D - Link WDA - 130 (hardware version E1, firmware version 5.10) and a Netgear WNDA3100v2. A few details. They install, the computer sees (they show that Manager devices installed and work properly in), but no card can see a wireless network (mine or others in the region).
  -Two cards work fine when I install on my HP laptop running XP Service Pack 3.
  -J' tried to install with the complete software of the manufacturer and allowing Windows to do it by looking for drivers.
  -J' tried to install them with my virus/firewall on and out (I use ZoneAlarm).
  -J' restored by system status 'factory' and installed.
  In all cases, the result is the same - the adapter installs, but will not see a wireless networks.

  XP drivers need to be installed in compatibility mode that has helped me

• Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter

  Realtek rtl8188su wireless lan update 802.11n usb 2.0 network adapter. What are the problems he says. is it necessary?

  See my response to your previous thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/latest-niviidia-driver-update-windows-7-64-geforce/2f0effbe-634b-e011-8dfc-68b599b31bf5

• "The specified network folder is currently mapped using a different user name and password", trying to connect to a remote drive.

  Original title: the specified network folder is currently mapped using a different user name and password.__To to connect using a different user name and password, first disconnect any existing mappings to this network share.

  I am trying to connect to a remote drive. I clicked to map the drive, entered the name of the drive, came the name of login/password for the computer turns on and then it give me this error message: the specified network folder is currently mapped using a different user name and password. To connect using a different user name and password, first disconnect any existing mappings to this network share.

  In Windows 7 Enterprise, I would like to point out that, if you map \\server1\share1 as drive letter X using "user1" and "password1", then try to map \\server1\share2 (a different share) as drive letter Y using the same ID "User1" and "password1" and you select 'connect using different credentials' in the dialog box connect a network drive and specify the id "User1" and "password1". you will get this error MESSAGE INCORRECT that says 'the specified network folder is currently mapped using a different user name and password'.

  The message is bad because:

  1. the specified network (action2 in my example) folder is not mapped at all, and

  2. the server (in my example, "server1") is already mapped (to a different and different drive letter share) using the SAME user name and password.

  The error message is wrong in two respects.

  This let me puzzled for a while until I realized that once you have mapped to 'Server1' using the credentials, you can map to different actions on the same server without re - specify the credentials.  It is NOT CLEARLY the 'Map network drives' dialog box, which leads to users (like me, and I'm a programmer by trade) trying to enter credentials again and this incorrect error message.

  David Walker

• Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

  Hello

  It is possible in some cases - Adpater, power and the ability to read the disc
  are the issues.

  Check with the manufacturer of phone and the USB key and their forums.

  How to: use your USB with the Nexus 7 [root]
  http://www.androidcentral.com/how-use-your-USB-flash-drives-nexus-7-root

  For phones Windows ask in this forum and check the support.

  Answers - Windows phones
  http://answers.Microsoft.com/en-us/WinPhone

  For other phones check with their Support and Forums.

  Support of SanDisk and Forums (and others) would be a good source of info.

  SanDisk - Support
  http://www.SanDisk.com/SanDisk-support/

  SanDisk - Forums
  http://forums.SanDisk.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Realtek RTL8187 Wireless 802. 11b / g 54Mbps USB 2.0 Network Adapter driver for windows 7 32 bit

  Hi I have a Realtek RTL8187 Wireless 802. 11b / g 54Mbps USB 2.0 Network Adapter and I have long ago through the internet and I can't find a driver in offline mode to install...

  any help?

  Hey

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=1&level=6&Conn=5&DownTypeID=3&GETDOWN=false&downloads=true

  or

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=1&level=6&Conn=5&DownTypeID=3&GETDOWN=false

• Pavilion network adapter are not not in Device Manager

  My Pavilion P6330f lost the internal network adapter (no internet connection, adapter are not not in Device Manager).  Is it possible to re-restore/refresh it?  I tried to do a scan to refresh hardware, but it doesn't show any internal network adapter.

  I was able to get back on the network by installing a wireless network adapter via the disk support provided with the wireless USB device and using Device Manager.

  It seems that the internal NETWORK adapter has gone (fried) and I need to install a new NETWORK adapter in one of the expansion slots.  Other options?

  Is this a common problem?

  D.

  No, it is not common, unless your home has experienced a surge\dropout of power or a bolt of lightning. What you are experiencing, this is usually the result of thet.

  Since your office worked five years ago, he certainly provided you a reliable service. You might consider looking for a PC replacement in 2015. SCP last usually about five years before replacement is required.

  Wireless, it's that a good option as no extra wire is a good thing.

• Error "insufficient system resources exist to complete the requested service" what installation driver for Remote NDIS on Internet sharing

  I get this error message when you try to install the driver 'Remote NDIS based Internet Sharing Device' Microsoft allowing me to attach my cell phone.  This driver installs normally automatically whenever I attach my phone to a computer windows 7 via USB and enable tethering.  I did several times with success on other systems, as well as one currently give this error.  I tried the registry setting:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management]
  "PagedPoolSize" = DWORD
  "PoolUsageMaximum' = dword:0000003 c

  As suggested in another article about this error message on a XP machine without success.

  Currently expanded memory: 179 Non paged: 84

  Any help would be appreciated.

  I also had this problem for awhile now and have been unable attach despite trying your suggested corrections.

  Could you clarify what the error code 5aa means exactly? I get this error code when getting the "Insufficient resources" error when trying to install/upgrade my Motorola Network Interface driver, but the same error code appeared recently when I tried to install the latest version of my application of attachment, which gave me the same error code even if instead of "insufficient system resources exist to complete the requested service." , it was in response to
  'UpdateDriverForPlugAndPlayDevices err is 5aa'.
  I could only solve this problem by installing an older version. I think to understand it this error code would better identify the source of this problem.

• Mobile Home with Yosemite/EL Capitan record

  Hello everyone

  I have a small business with 30 macs odd configuration. The server runs 10.7.5 and 10.9.5 customers.  I have long and hard battle thanks to a non-existent documentation on records of mobile home that I managed to create a stable environment using Active Directory, Open Directory and WorkGroup Manager (MCX).

  With the slow death of the PCS I'm now migration 10.10.5 system (server and clients). I'm trying to set up mobile home folders by a manager of profiles installed on the mac server. The Profile Manager works well, but the correct configuration for mobile home folders still eludes me.

  Ist there a complete documentation available or there at - it someone here who could shed some light on the subject?

  Any help would be appreciated :-)

  Ralph

  If some thoughts.  If Active Directory is the center of your domain, then the Foundation of mobile accounts is really easy as all you have to do is to link the AD positions.  For a complete control I suggest to use directory utility to bind the work stations (you can use a Configuration profile, but I'll get to that in a minute).  Using the directory utility, you must check the option "Create mobile account when connecting".  And there you have it, the mobile accounts through AD accounts.  There is no need for OS X Server, or profiled PCS achieve mobile accounts with AD as your domain name.  Just go to the login window, waiting for others... to appear, then connect using the credentials of the AD.  Always check the details of the connection by using sudo dsconfigad - show that he has hidden options that may apply to your environment (passinterval, packet signing, package encrypt, etc.).

  Ah, but you receive no management.  Link AD authentication and authorization but also provides password policy.  But beyond that, there is no way to apply GPOS through the windows system.  This results in the old days of double lie, lie to AD as the master and then directory management OD get PCS settings to manage the account.  This era is over.

  Today, if you want to manage Macs in an AD domain, you through the Profile Manager, JAMF, Airwatch or all other MDM solutions out there.  If you build on Apple.app, you'll need an Open Directory as OD master is where the settings of the Profile Manager are stored.  However, it does not need to link workstations to OD, except if you need to create groups of proxies that can not (or will not) created in AD.  Instead, you must bind the workstations to AD and enroll them in the Profile Manager.  If you want to only manage at the level of the Group of devices/device (and you don't need to enter the unique users or kerberiser all services such as OS X Server file sharing) you should be able to even to get away without tying the AD server.

  So, as a test, try this with one of your machines.  This is the manual way.  Later, you can build effective as creating a profile of attachment to AD in the Profile Manager, allowing you to register only and so get what you need.  So get a trial of machines.  This assumes that AD is always at the heart of the area and you have the configuration correctly Profile Manager on the OS X Server.  (this assumes that DNS is properly set)  It also requires that you allow Push Notification works on your network.  If you are behind Proxy Auth, you have to do.

  1: take a test workstation

  2: link to AD to ensure that the plugin active AD support mobile home.  Remove the window confirmation so desires.

  3: Verify that you can connect with an AD account and that the account offline caches

  4: enter the Device Manager profile through the web registration page (https://your.server.host/mydevices)

  5: create a device group and apply your management needs.  Don't forget, mobility is NOT necessary that the AD is already the application of the mobile account.  Try something very visual such as changing the appearance of the login window.

  6: add your device to the device group.

  7: confirm the receipt and the application of your settings.

  And it has the basics.  From there, you can streamline by incorporating the AD link in the Profile Manager, allowing a single step instead of several.  In addition, if you know your serial number of the device, you can add or import records from the placeholder, which before people volume groups.

  I hope this helps.  In many ways, AD makes the process easier.  If you are dumping AD and going right OD, then use the charge of mobility and make sure your OD accounts have a value of path and of the shell in the right folder.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store