Sandy

Similar Questions

• Omni 1020 120 pc: upgrade processor motherboard Sandy bridge

  Can I use Intel Core i3-3220 (3rd generation) Ivy Bridge 3.3 GHz LGA 1155 55W Intel HD Graphics 2500 for my Omni 1020 120 pc aio pc?

  Thank you for the information, @Nannigalaxy.

  The information I needed was the (in) at the end of the model.  Here are the processors that have been fully tested to work in your motherboard:

  TDP: up to 65W
  Socket type: LGA 1155
  Motherboard supports the following processor upgrades:
  Intel Pentium G4xx (Sandy Bridge) core
  Dual-core Intel Pentium G5xx (Sandy Bridge)
  Dual-core Intel Pentium G6xxT (Sandy Bridge)
  Dual-core Intel Pentium G6xx (Sandy Bridge)
  Dual-core Intel Pentium G8xx (Sandy Bridge)
  Intel Core i3-2xxx/T (Sandy Bridge) Dual Core
  Intel Core i3-2xxx (Sandy Bridge) Dual Core
  Intel Core i5-2xxx (Sandy Bridge) Quad Core
  Intel Core i7-2xxx (Sandy Bridge) Quad Core

  These are processors that we know won't work correctly.  If you use any processor not on the list, he has a good chance that it won't work.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite P750 - 10 c: HARD drive slows down - Sandy Bridge Cougar problem?

  Hello

  I have problem with my notebook Satellite P750 - 10 c with S/N: 4B478828K.
  When I enabled AHCI in the BIOS, computer slows diametrically, day after day was worste and worste, so I tried to change from AHCI to IDE and it helped a little, but is still not good.

  I tried to restore my system, but it did not help.
  I read that Intel has released a version tapped for Sandy Bridge chipset, I have (HM65) SATA 3Gbs problem (I just checked in HD Tune and HARD drive is connected to the port of 3Gbs), so I think I got bugged version.

  My laptop is not guaranteed, but Intel said they changed valid version, so where do I return my phone to fix.

  Kind regards
  Tomek

  > I read that Intel launched buggy version of the chipset for Sandy Bridge.
  The problem was a Cougar Point of Sandy Bridge chipset and not the main processor Sandy Bridge.

  In addition Intel said that this issue affected only the SATA 2 to 5 and not ports 0 and 1.
  Most laptops use only two devices SATA (HDD/SSD and ODD) using the affected ports 0 and 1.
  That is why I think that your problem could be linked to the issue of Cougar Point the Sandy Bridge chipset.

  By the way: not all Intel Sandy Bridge chipsets have been affected.

  Regarding your question:
  Usually if AHCI is enabled, the HARD drive must use the performance of SATA. If compatibility mode, the HARD drive would go at the speed of the IDE.
  I think your problem is perhaps related to the problem drive HARD and not Intel problem.

• G6-1262sa Pavilion: Pavilion g6-1262sa CPU upgrade v2, Sandy Bridge = > Ivy Bridge?

  Hi, thanks to the Pavilion g6-1262sa maintenance and manual cleaning and this great forum, I recently discovered that replace my i3-2330 m is possible with all sandy bridge i7 2620m processors.

  These questions may sound silly, but I continued my research and I have more ideas to confront reality as a couple.

  I realize that the compatibility is not only matter of editing the same socket, but also of the bios installed on certain motherboard, however:

  1. do you think it would be possible to Exchange Sandy Bridge (2nd generation) i3 - 2330 m for some Ivy Bridge (3rd generation) i5-3210 m?

  2 is the 32nm to 22nm manufacturing technology enough difference on its own (even if the rest of the architecture is the same) to prevent that to work?

  3 is the bios from my card mother g6 identyfying somehow installed processor? (if this isn't on 'the list' it simply won't work? "or what technical compatibility issue?

  According to some statements which I found it on some forums and sites (and a few facts documented free):

  Socket: the two processors are compatible with BGA1023 decision-making. (at least that's what I found, if someone could confirm I would be grateful)

  Difference of architecture: "The 3rd generation is called 'Ivy Bridge' and is essentially a copy of Sandy Bridge made on a smaller scale, or die." However, Intel also focused on beefing up of the onboard graphics in this generation. »

  TDP: both are 35 W

  Carrots: both are 2 physical (Virtual 4 - thanks to hyperthreading I guess?)

  Energy consumption: "Ivy Bridge CPUS also use less energy", "Ivy Bridge consumes less energy; around 10w, I think. »

  Temperature: i5-3210 m going 5 * C more - 2330 m - i3 shouldn't make much difference

  Looking forward to some responses, RacA

  It is not a technical incompatibility (socket) because as you probably know Ivy Bridge and Sandy Bridge are backward compatible on most motherboards desktop. However, HP has only implemented gen 2d, processor Intel Core compatibility of the HM65 Express chipset that you a. motherboards supporting 3rd gen processors use the HM77 chipset. There is no another motherboard that will fit in your frame.

  Your analysis above, which was pretty good, left out the chipset, which you must always remember when assessing the possibilities of upgrade:

  http://www.CPU-upgrade.com/MB-Intel_%28chipsets%29/HM65_Express.html

  The HM65 supports a couple 3rd gen processors, but none of them are on the list of HP for your model. You can try one of those shown in the link I gave, but I think that there is a small chance that they will work.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite A660 - 1 H 5 and crack chips Sandy

  Hello

  I'm new to this forum. I recently bought a 1 H 5 A660. The thing within a week of purchase that I start to get this blue screen when I turn on the computer. It is about 50% of the time. Then I went to the shop where I buy the machine and discovered that there is a recall of the product because of the fault of sandy bridge.

  «Toshiba also recalled its models of series A660 Satellite L655, A665 and M645, the Satellite E305 S1990, select computers laptop Toshiba Portege R835, some systems of the Qosmio X 505 and the Qosmio X 500 series - model Q930.»

  The thing is I can't find my product even on the toshiba site. I can find 1 h 7, 1:6, but not 1 h 5. I want to know is there anyone with the same situation as me. And I want to know is the same laptop with the same specification will be released in April when intel ships fixed chips?

  And the thing I don't understand is, according to the news:

  "The Cougar Point flaw affects only SATA Intel controlled 3 Gbps ports - 6 GB/s ports are fully operational." PC manufacturers who only make use of the 6 Gb/s ports are therefore encouraged to continue anyway.

  "* If you are a manufacturer of laptop, you will find laptops which is enough for a hard drive and DVD drive, two ports SATA [6 Gb/s]", said a spokesperson for Intel Pro PC *. "In these cases, it is perfectly OK to use the B2 walk."

  Also, surely, it should not cause a problem on my laptop? Even if it does, not after a week of purchase?

  I have that really the new laptop and I really want to get a strong response from the official toshiba representative exactly what the problem with my computer before you return it for a refund.

  BTW, my laptop can be found on amazon:

  http://www.Amazon.co.UK/Toshiba-Satellite-I7-2630QM-processor-Bluetooth/DP/B004K6MEPY

  Spec:

  Brand: Toshiba
  Size of RAM: 6 GB
  Processor brand: Intel
  CPU speed: 2 GHz
  Processor type: Intel Core i7-2630QM
  Hard drive size: 640 GB
  Hard drive speed: 5400 RPM
  Computer memory Type: DDR3 SDRAM
  Operating system: Windows 7 Edition Home Premium
  Description of graphics card: NVIDIA® GeForce® GT 540 M
  Size of graphics card Ram: 2 GB
  Chart of RAM type: DDR3 SDRAM
  Screen size: 15.6 inches
  Display technology: LCD
  Response time: 16 milliseconds
  Type of light Source: LED
  Speakers Maximum output power: 2 watts

  Post edited by: ethan.ky

  Post edited by: ethan.ky

  Post edited by: ethan.ky

  Post edited by: ethan.ky

  Post edited by: ethan.ky

  Hello

  My cousin bought one of these new A660 with the Sandy Bridge chipset and it works perfectly fine.
  Apparently it takes months or even years for the SATA ports to start to fail, he decided to keep this A660 for now, until new motherboards are available.

  We discovered that only the external SATA (eSATA) port is assigned.
  The HARD drive is not on a port.
  The optical drive is on a port, but optical drives do not require a high bandwidth so it is not affected.

  So basically, you have the option to return the laptop rather than buy or keep it for the time, and then send it to an ASP when new mothers are available.

• Sandy Bridge for Ivy Bridge CPU upgrade in the W520

  Sandy Bridge and Ivy Bridge using the same socket. All tech sites say that we can do.

  What are the implications? With HD-4000 graphics I would now be able to drive 4 monitors? What other benefits are there? Energy consumption is slightly reduced, the speed is slightly increased.

  What are the limits of the chipset and BIOS implications?

  It's probably not about the money, but will it work?

  
  

• I NEED HELP TO SOLVE MY PROBLEM OF SANDY BRIDGE CHIPSET!

  Hello

  I need someone to receive the update for my Pavilion Dv7 help 4290us part!.

  It is one of the machines involved in the problem of Sandy Bridge, I checked several times...

  I'm already registered the laptop

  Thanks in advance

  Manuel Ramirez

  The number of product of your laptop is XZ037UA #ABA (here ABA means this model has been sold in the United States only). Where was this laptop bought exactly and where are you located now?

  HP offers a comprehensive guarantee and ideally, this should be covered free of charge. You can find more info on link below

  http://support.HP.com/us-en/document/bpr01266

• Fix for nasty bug of Sandy Bridge badly on USB devices

  Anyone know if there is a fix yet, some USB devices fail intermittently on a new MB with Windows 7 64 - bit edition.

  It is a quad core running the Sandy Bridge chipset, and vodafone dongles does work, even if they did on W7 64 bit on the former Council.

  Fault too:-some external hard drives are not recognized on any port.

  Your hard drives are connected via SATA?

  There is a known issue with some Sandy Bridge chipsets, where ports SATA fail, don't know if it affects USB ports or not.

  Intel issued a notice of recall for this with the affected chipsets - did you check the Intel website to see if you are one of those affected

• Please do you intend to produce T series laptop with 15.6 display based on Sandy Bridge?

  Please tell me you intend to produce T series laptop with screen 15.6 inches based on Sandy Bridge processors? Please write soon. I await your response. Thanks in advance, you

  If you scroll down a little ways on www.Thinkpads.com, they say that the T420/T520 will be introduced in February.

• Sandy Bridge chipset problem

  New computers from Dell desktop XPS 8300 with processors Intel i7 2600 still have the 'Sandy Bridge chipset' fault on their motherboards 67-series?  I read that Dell at first continued to build defective systems, while planning replace motherboards later for customers who have applied the patch.  Is this still the case now?

  Don't believe everything you hear / read:

  en.Community.Dell.com/.../Intel-Chipset-issue.aspx

  www.ZDNet.com/.../11220

  They were 'fired' and is most sold once they have received the word of Intel on the issue.  Once equipped with the chipset update, sales picked up.  Motherboards have been replaced and returns available to those who bought before the problem came to light.

• Dynamic Cluster migration "Haswell" Intel and Intel 'Sandy Bridge' Cluster

  Hi all

  Need your help on this, on our below, we have two clusters ClusterA (EVC mode is Intel Haswell) and focus (EVC mode is Intel Sandy Bridge), the current problem we are facing right now is that we can not migrate from VM direct of clusterA to b, but successful once we stop the virtual machine and migrate to b. Webcam live migration of VM of focus to ClusterA now question. My question is, is there a way that we can migrate from VM direct ClusterA to b without changing the mode of the VCA on the two hosts?

  Details of home:

  Group A:
  CPU: Intel Xeon CPU E5-2698 V3 2.30 Ghz
  RAM: 256 GB
  EVC: Intel "Haswell" generation

  
  

  Group b:

  CPU: Intel Xeon CPU 2.6 Ghz E5-2670

  RAM: 256 GB

  EVC: Intel 'Sandy Bridge' generation

  If a processor can support level VCA XN, it can also support XN-1 to Xlevels 0. For example, a processor that supports Intel EVC baseline 'Sandy Bridge' generation has a level of EVC of L4. Therefore, it can also support VCA L0, L1, L3 and L2 levels. However, he cannot bear VCA level L5, which corresponds to the generation of Intel®'s "Ivy Bridge'. Intel EVC baselines are listed in table 1.1.

  Ref: KB VMware: best vMotion compatibility (EVC) processor support

  Thus, virtual machines that are running in your focus (EVC mode is Intel Sandy Bridge), should be able to move freely (vMotion) to b (mode of EVC is Intel Sandy Bridge) to ClusterA (EVC mode is Intel Haswell) and A to B provided that the virtual machine that is in your Cluster B vMotioned while in Group A and A is not in the power Cycle, if you put it off and on again then it will be new pickup EVC mode, otherwise it will continue to work with his original mode of VCA.

  But if you take the case of the virtual machines running within your group, those who can not be vMotioned to group B, because they are running with mode higher CVS, canoe taken to lower VCA as live migration, you can migrate cold (power off and move)

  Ideally if you want to reach vMotion compatibility between the two clusters, you must set the VCA mode for each group for Intel Sandy Bridge. But like asking you if you won't change EVC mode at all, the solution proposed would be

  Turned off of the virtual machines in your A group phase by phase, turn cold migration from Group B, there and let the fashion of these machines virtual micro Cluster B EVC, then move them again in A Cluster, in short to realize all the VM in EVC of Cluster B mode. But you will always be in the face of challenge then if VM through the feeding cycle while in Group A, it will pickup Haswell VCA mode and you will lose compatibility vMotion for this virtual machine on cluster again.

  so, what you're asking can be done using method above, but better would be to have two clusters in the VCA mode even if you don't have to worry about power cycles.

  Note: You need to use vSphere Web Client.

• support for vSphere for Sandy Bridge processors

  Good afternoon

  Don't vSphere 5.0 supports Sandy Bridge processors 2nd generation? I mean specifically i7.

  Thank you in advance and best regards,

  Jan

  Although I'm sure that you'll be able to do work, I doubt you'll find supported in VMware HCL desktop processors

  André.

• Sandy Bridge and PCI channels/performance question

  I was doing emergency surgery on my old HP and I remembered that I have a couple of old graphics cards lying around. And that made me think of my collection in constant expansion of hard drives and never less in less free time, backups, and Sandy Bridge platform limited channels PCI and their (real? theoretical?) effect on performance with cards cards additional specifically RAID. If I'm covering old ground, let me know.

  As I understand, there is not much to be gained by installing an old ATI HD2400 Pro or similar in a new computer, what I'm really wondering is - after installing the card and a third running monitor on it - of the main graphics card and related parts of my system would suffer a slowdown similar to what might be expected if a RAID card is installed.

  (And no, I don't mean to revive the heated discussions of Sandy Bridge / X 58.) Is it you like someone ' one, anyone - let them be above!)

  I am just wondering if it might be a worthwhile project to compare benchmarks with and without a second graphics card installed and if someone thinks it would be a logical way to see no effect on the allocation of 570's PCI channels alone, without the complication of a real external RAID array question (and the enormous benefits it would probably).

  everything you need to know here

  http://forums.Adobe.com/thread/854514?TSTART=30

  This has been put to bed in time there...

  Scott

  ADK

• Yet another thread Sandy Bridge vs i7 - 9XX; 16GB vs 24 GB of memory?

  Gentlemen.

  Like many others, I read the hardware threads on an ongoing basis since getting CS5 about a year, including (I think) all items for damage. I feel that I have a basic understanding of the socket 1366 vs debate 1155/6. No need to re-hash things this time.

  Yet, I think bad and others have made convincing for those who need the best, the X 58 with a big-time RAID configuration cannot be beat for the distribution of data and achieve the Holy Grail - balance. The worst the Z68 is derisory location of PCI-E lanes. I do not fully understand, but he can see that the many alleyways less, shared, is less than X 58. But don't the Z68 missing completely those of us who do not push the envelope? Who have a little more time waiting while the ' puter calculates?

  I am on a budget and just want to spend my AMD Phenom II platform to an Intel platform. I mainly turn student videos of math which, by nature, must be no more than 5 minutes or more in length. My camera is a Canon T2i images so AVCHD. I took the advice of a member of the Board of Directors and will probably start shooting in VGA, questioning the sanity of shooting HD for clips that do not need to run mode full-screen. Overall, my requirements are on the low end (except for the codec. And I am ready to undertake NeoScene as a patch). I suspect that my needs are in line with many of those who can offer the student of CS5 version and find themselves in need of a new platform, but perhaps not ready for professionals.

  Quick Sync appealed to me, that I need to transcode frequently for mobile devices. In addition, other teachers in the building along with camcorders JVC .mov, which means that they can not often change with their favorite software. I find myself any transcoding of our small team.

  As I started to build something again over the summer, I'm trying to settle major issues in the face of those of us tax less end of the spectrum. I'll never get a RAID card, but have an arrangement of 5-disc basis, including a RAID on 2 discs 0 for a film. All I have to to is sorting out which platform is best for my needs of any

  I'm just trying to move to Intel without breaking. But if another $ 250 for the X 58 will make a HUGE difference, so I would probably jump. Ventilation for a cheap (er) Intel platform:

  CPU: i7 - 2500K. No Hyper-Threading but technology can overclock beyond more expensive i7-950. Only $30 cheaper than the i7-950. Spend $100 more for i7 - 2600K and get a higher Nehalem processor, but out behind on $$$.

  
  Motherboards: Z68 starts about $130 for a decent spec'ed ASRock Z68 PRO3 to the ' egg. Fall another $20 for a combo with the CPU. Cripes, X 58 boards are expensive!

  After the motherboard, i7 - 2500K and ASRock seek powerful good. $125 less than i7 - 950 and X 58 and who is with a X 58 cheaper Board. In addition, a four-stick kit memory 16GB is about $100 cheaper than 24 GB of G.Skill, rated either in ability Newegg brand. Economy of $225-ish. As long as my needs are satisfied, I'll save money and get a quick synchronization to start. At this point, I'm willing to bet that my short-clip needs will be met, in fact.

  Thesis: Now, here can be the deciding factor - with the price of memory fall big-time, but within reasonable limits maximum memory on each platform. X 58 may take 24 GB, the senior Z68 to 16 GB. I remember Bill Gehrke saying that the first results of the suite of PPBM5 showed a difference in (rendering?) time with the jump to 24gigs. I think that the 16 GB looks like a lot of memory, which is. But dropping $100 for 24 concerts would be a game changer? I don't talk a 24 GB kits cheap with 9-9-9 times, not something jumped to hop to the top. (Requires X 58 memory super - duper or a motherboard $ 300 to run in fact 24 GB?)

  X 58 may take 24 GB triple-channel memory would be the last word? For all of my tent to save $250 or more by going cheap (er) with i7 - 2500K SB, I'll miss on perhaps the most important? Most of the other programs in CS5 uses CUDA to accelerate - would be slightly less powerful i7-950 processor so supplemented by another 8GB (more than 50%!) of system memory that would apparently stealing other programs compared to SB?

  If CS5 works just like a dog scalded on 24 GB, then I will suck and renounce Quick Sync and spend a little more money. I feel there is a difference of opinion if Sandy Bridge is a stronger for the edition CPU (even if there is no debate on X 58 vs Z68 for the processing of data). But it seems that there should be a clearer idea the benefits of 16 vs 24 GB of memory.

  Everyone here would make a decision based on this last aspect?

  Joel, the extra memory essentially has no effect on the scores of PPBM5 with the CS5 version.  We do not yet have any information on the CS5.5.  Look at the fourth note on PPBM5 it has been implemented with 14 GB on an X 58 Board.  Ultra complex timeline manipulation and encoding may be a little different.  I suspect this fall when the Sandy Bridge E CPU and motherboards are released that will start to see the memory strong 8 GB for these cards so that when this produces the current generation Sandy Bridge motherboards will be then be able to be upgraded to 32 GB as some motherboard manufacturers have promised.

• Create cast with Sandy Look?

  I want to know how to give a melting texture sandy, either by putting a texture Sandy on an already existing font, either by writing it myself with a brush of sand.  I am a photographer and does generally not use PS for something else, if I never had to do before.

  Thank you

  Greg

  With the text tool and a police enough heavy (to show the texture), create the text. Choose a color of sand for the police.

  You can see in the layers panel , is it on a new layer. At this stage, the type is in the form of vectors. To apply a filter effect, it must be rasterised.

  Right-click on the image and select Rasterize Type. This option enables the type in pixels.

  Now go to filter > noise > Add noise...   Choose a uniform and monochromatic and move the slider for an effect you like.

  You can adjust the layer as a result of taste.

  (The veneer texture filter is just another way to do the same thing using a sandstone effect.)

• Need a brush of sandy beach

  Hello

  I searched for brushes of beach sand... I'm looking so far (not), in the archives of Dave Nagel and done a search here... Got to thinking someone may know where I can download a brush of sandy beach set.

  Thanks in advance.

  Bob

  Why not use the clone on a separate layer stamp tool, you should have a lot of sand for sample of. You can then use something like the tool to Dodge and burn to the shadow of the sand