SansaClip + 4GB may be permitted for Rhapsody

I use first Rhapsody and just got a replacement of a defective SansaClip + 4GB that I am trying to allow on Rhapsody to transfer songs.  I had no problem allowing two previous SansaClips, but with this one I can't get something to open that will allow me to authorize a new.

I used the compatibility report of the device on the page of Rhapsody and obtained information that my device is not currently configured for

use with Rhapsody Prime Minister but the settings on the Clip could be modified to allow this.  Of course, there is no

information on how to do it.  I used the Sansa update and also reformatted the device.  Rhapsody sent an email on this subject, I am hoping to get some help here.

Anyone with any ideas on that?

Respectfully submitted.

Black Rectangle - you sure lived up to your status of guru on that one.  It worked!

Tags: SanDisk Sansa

Similar Questions

  • What are the techniques of compression permitted for PDF/A-1?

    The PDF/A-1 standard does not specify how the compression is performed. What are the techniques of compression permitted for PDF/A-1?

    The information that I have collected (not sure if all are true)

    1. LZW should not be used
    2. JPEG2000 may not be used
    3. Some say, JPEG can be used, but it's a lossy compression. (Standard PDF clearly indicates a lossy compression cannot be used)

    How to determine if a particular file is PDF/A-1 also or PDF/A-1b and what type of cuts are used in this file?

    Thanks in advance.

    Adobe Acrobat Pro provides preflight profiles to test if a PDF conforms to a PDF/A or PDF / X standards. There are also options to convert a PDF file to one of these standards if these corrections are possible.

    FYI, there are specifications for the various PDF/A and PDF / X specifications that you can buy (on paper or downloadable PDF files) of the ISO.

    -Dov

  • Loop Finder crash after upgrading to El Capitan.  'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English operating system.

    'Finder close unexpectedly when you use the plug-in finder' - the message really is in Norwegian, so it may be different for the English.  The e is a compatibility issue with dropbox or Google drive in El Capitan?  Those are the plug-ins only that I could find.  Thank you very much.

    Please launch the Console application in one of the following ways:

    ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

    ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

    ☞ Open LaunchPad and start typing the name.

    Step 1

    For this step, the title of the Console window should be all Messages. If it isn't, select

    SYSTEM LOG QUERIES ▹ all Messages

    in the list of logs on the left. If you don't see this list, select

    List of newspapers seen ▹ display

    in the menu at the top of the screen bar.

    In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

    Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

    The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

    Please don't dump blindly thousands of lines in the journal in this discussion.

    Please do not post screenshots of log messages - text poster.

    Some private information, such as your name, may appear in the log. Anonymize before posting.

    Step 2

    In the Console window, clear the search box, and then select

    DIAGNOSIS AND diagnostic USE information reports ▹ user

    (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

    I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

    If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

    In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

    Please do not post other types of diagnostic report - they are very long and rarely useful.

    When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

    If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  • Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

    Is it necessary to create additional rules not permitted for uses such as Regedit.exe etc when applying software restriction policy?

    Hello

    Please visit the following link. This should explain the software restriction policies in detail.

    http://TechNet.Microsoft.com/en-us/library/bb457006.aspx

  • I am a student until February 2016, can I buy student creative cloud only permits for 2 months?

    I am a student until February 2016, can I buy student creative cloud only permits for 2 months? I tried to

    Hi Elina,

    You can buy creative cloud for 2 months (month membership), but its not available under the student teacher reviews.

    Please see: -.

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

    Please go through the Adobe - General conditions of subscription as well.

    I hope that answers your query!

  • I am a student and I bought the iPhone 6s may 27, eligible for a free headset?

    As the title suggests,

    Can I get a headset wireless Powerbeats2 to the free address? I bought in a local store and the total amount on the spot. I am a student at the University.

    The thing is, in fact, I bought my iPhone 6 broke down for no reason. The touch screen no longer recognizes the entry.

    Zero stripes, absolutely perfect. Never had water in it etc. Bought on December 2014. I sold the iPhone 6 for a gift card, then used to buy the iPhone 6 s on 27 May.

    Does not appear you are eligible:

    There are purchases of sites US Apple Store, the American Apple Store online for individuals teaching US stores of authorized Campus Apple, or by calling 1-800-MY-APPLE from 2 June 2016, through September 5, 2016.

    http://www.Apple.com/us-HED/shop

  • Failed to init/restart install Creative suite 6, may be waiting for win 7

    During the initialization of the installation program, what happens to the reboot machine may be waiting however HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager. does not contain key InProgress

    I already rebooted the computer due to problems arising from a previous version of NVIDIA graphics card to interfere, conflicted with an update of windows, with the Revit Architecture software.

    Both programs are necessary for school.

    Not finding is not the problem it is resolved down just to initialize for a decent time. This left nothing for taking Adviser in charge of adobe able to recognize.
    Help, please.

    Hi R.scott55,

    Please, navigate to the C/Program Files (X 86) /Common Files/Adobe/and look for caps and OOBE and rename both.

    Rerun the Setup program. If it says reboot is pending just select ignore and proceed with the installation.

    If all issue, then follow the aims of steps in the kb: http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-bootstrapper-cs5.html

    Kind regards

    Romit Sinha

  • Windows Update - Windows error code may not search for updates - 80080005

    My HD crashed and had to get a new one. When I got my laptop, 2 weeks ago I was told because I have a new HD, my laptop has been restored to factory settings.

    Ever since I have EDT decided to back up my laptop, I get an error message from my windows update.

    For this reason many of my programs do not work as usual. For my internet browser, for example, if I have to use the ActivX Control to upload a file it refreshes just the screen.

    You are able to help with my problem or should I go elsewhere?

    Hi ImDaPanda,

    Please see the post below so that we can help you:
    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4f7d98d7-f1c4b35b3395

    While I'm waiting for your quick response, run the Microsoft FixIt in KB 971187 - how to fix the MSI software update registration corruption issues by clicking on the link below:
    http://support.microsoft.com/kb/971187. Then, try again on your Windows Update.

    If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • VAC converter for rhapsody

    Rhapsody stopped all of a sudden to convert my itunes ACC files when I try to load them onto my Sansa Fuse; always been able to transfer before.  I screwed up something and can't seem to locate the problem, any ideas?

    Thank you! J & L

    UN install Rhapsody, then reinstall it.

    BTW, if you want to convert from the ACC to mp3, then in case you don't know, iTunes can also do.

    See you soon,.

    Jerry

  • The operation failed as no adapter is in the State permitted for this operation.

    I use windows 7 on a laptop, I used IPconfig enough the other day, and every time I try to put in ipconfig / renew I get this error message in the title. I have DHCP enabled on the router, the other two conputers in my House still works (an office and another laptop, the two laptops are the wireless)

    When I click on the network icon at the bottom right it says that I'm connected to my home network, but in my network and sharing Center it shows that I am not connected to any network.

    Hello

    -For how long have you been faced with this problem?

    -Have there been recent changes made on your computer?

    I suggest you to follow these steps and check if it works.

    a. click Start, click run, type cmdand press ENTER.

    b. at the command prompt, type netsh int ip reset resetlog.txt, and then press ENTER to reset the TCP/IP network protocol.

    c. at the command prompt, type ipconfig / renew, then press ENTER and check if you see the error.

    Also check out the links below and check, if it helps.

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=tab02

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  • Buy photoshop elements 13 and cannot download because of a message in red, indicating that it may take uo for 24 hours... its been more than that... What is the time?... DSB. # AD016363676?

    why it takes so long to get my download started, its been more than 24 hours.

    Hello

    My apologies for the frustrating experience.

    Your order is complete and is ready for download. Please follow the instructions here quickly find your serial number to download the software.

    Alternatively, you can also download a copy of the installer from here products download Photoshop Elements | 10, 11, 12, 13 and use the serial number during the installation of the software.

    ^ Ani

  • Created LiveCycle Form, permits for player rights, user rights opens disabled!

    Hi, I create forms for my company using LiveCycle Designer on PC. So I did for 3 years. Using XP, then Windows 7 and now Windows 8. I have created over 100 forms in this way, static and dynamic, usually with digital signatures and several pages. I have download the portal of the employees of our company and they are downloaded and sent locations around the United States and Puerto Rico. My normal process is to create in LiveCycle, open them in Acrobat Pro, extend rights to the drive, then save and download for employees.

    After the release of Reader X I started having complaints from employees that their forms did not allow to save or sign. After a few months of this I realized that almost all of my forms were doing that and I can't find a common denominator among them! Some of them are rather static, dynamic, some have signatures, others not, some complicated calculations, some do not... etc.

    Today I did some experiementing and created a simple form with only basic text fields, I saved on my computer, extended rights, then open in XI on the same drive. No problem. Then sent to myself, he opened on my laptop using the XI player. Problem. This is the message that I had and that all my employees get.

    "This document contained certain rights to activate special features in Adobe Reader." The document has been modified since its creation, and these rights are no longer valid. Please contact the author for the original version of this document. »

    As you can imagine, it's a huge problem for my company as we rely on this forms for all current work days. I searched the forums here and tried a few solutions but none seem to be anywhere near target. Thanks for any help or someone can give advice. (Sorry for the long question, but I thought that it better all along!)

    Well, I was initially hoping that's computers to my employees, but they are distributed on the East Coast with changing levels of computer skills and I could not just to nail a common point between them. Different versions, time zones and BONE (some XP and a few Windows 7). I went ahead and sent you an email. Thank you!!!

  • MacOSX AIR permits for the nonadministrator user folders

    We make the final changes to our Installer for Mac PowerPC, who can't get the fixes in Adobe AIR 2.7.
    What are ownership AND permissions should be for normal operation in the following folders in the Adobe AIR user?

    ~/Library/application support/Adobe/AIR
    ~/Library/Preferences/Macromedia/Flash Player/www.macromedia.com/
    / Users/shared/library/Application Support/Adobe

    We would like to know if it is advisable to apply fixed permissions in user folders other than those under the administrator user. Neither the AIR install Repair.zip posted on forums or newspapers install MacOSX Adobe AIR 2.7 show that all user files other than those under the Admin user are changed.

    Thanks for your advice.

    Hello

    I don't think you need to make adjustments to these folders.  Here's what mine are fixed:

    / Users/chris/Library/Application Support/Adobe/AIR

    755 / owner: chris group: chris

    / Users/chris/Library/Preferences/Macromedia/Flash Player/www.macromedia.com

    755 / owner: chris group: chris

    / Users/shared/library/Application Support/Adobe

    755 / owner: chris group: wheel

    FWIW, the reason for which we had to fix the permissions has been due to versions beta of the latest Creative Suite installers (the installers of the expedition have been corrected.)  As far as I know, only made records were those that we corrected in the installer and I addressed in the script.

    Thank you

    Chris

  • You may be looking for a script?

    Is there a way to make the text and a number appear digitally.  For example, I have a table where you can add rows and columns is txt with a number.  I have this number show up in numerical order, whenever a row is added?  The text is MR + 1 or so on.

    Of course

    Use FormCalc in the textfield layoutReady event.

    $ = Concat ("MR", $. parent.index + 1).

  • Start 2011 13 "Macbook Pro with overheating which may be responsible for problems of logical memory board or app... not addressed in repair under warranty for MBP 15 & 17

    My early 2011 MBP 13 "took 2 battery replacements and is suddenly showing app memory problems, stop suddenly, extremely slow performance... etc.  Note 15 and 17 "in early 2011 MBP are part of a free replacement/repair program with Apple after many years of problem reports and legal action.

    Is my 13 "also part of this clear problem or I am the GROUND?

    Are what program you referring?

    http://www.Apple.com/support/MacBookPro-videoissues/

Maybe you are looking for

  • Not able to print the PDF with firefox 29,0 Preview pdf plugin. Why?

    Not able to print the PDF with firefox 29,0 Preview pdf plugin. Why?

  • Die Pages?

    In pages'09, I used "mail merge." This feature (and more) are lost for years. Apple gave back the text app to the former level (for adults and for professional use)? Updated May 10 - 2016 is not also bring any new substance (or old things built new).

  • printers HP psc 2110 all-in-one

    Past from windows xp to 7. My printer will not scan. Message "no scan option. You need to install or run HP software for the feature.

  • The Panel buttons before manipulation within a structure of event

    Is there an easy way to manage buttons on the front panel within a structure of the event? I am currently using a structure of the event to bring up a settings tab, but I can only use the buttons that are designated as events. Is it possible to use n

  • 9421 sinking digital input toggles output

    I have a digital input module 9421.  I'm only using a single port (0).  The line is 'high' all the time.  I can see it on the lights and the tool MAX.  I can turn on/off the line and see the LED and MAX change, so I know I have the cable correctly th