Sat L20-102: need software for power management

Similar Questions

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html

• Satellite A135-SP4088: need drivers XP for power management and Hotkey utility

  Hello
  I could not find the drivers for the toshiba A135-SP4088, we bought 3 of them to the office and it is almost impossible to use with vista, so we go to XP SP2 and manage to get almost all pilots of the other models, but I can't find 2 utilities that work with this machine, they are:
  Toshiba power management (remember the bulb in the taskbar) :D

  Hotkey Utility (so I can change the brightness of the screen and go to hibernation (Fn + F4)

  I have al the rest works very well, but these two are a real problem, none of the ones I tested worked, some same crash XP and must return to a previous restore point.

  also, I did not install ACPI drivers, are they necessary?, what are those that show I'm looking for? given that the model does not exist in the csd.toshiba.com site.

  Now, how one of the largest manufacturers of laptops in the world can build a such nice computer without drivers for the most common operating system?, can someone explain me this because I sincerely do not understand.

  Thank you very much!.
  Indkt.

  Hello

  You can try after addresses:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  and
  http://209.167.114.38/support/download/ln_byModel.asp
  Maybe you can find the drivers you are looking for here.

  If this isn't the case then give some feedback and we will find another solution

  Welcome them

• Sleeps, even if configured for power management settings do not

  HI -.

  New installation of Win 8.

  Before that the drivers have been installed, I could leave my laptop on it overnight, and he stayed.

  Then I installed the power management driver, that produced a framework for "put the computer to sleep. I then put this on "Never" for the section of 'sector '. Whenever I leave the machine on the night... I wake up to it off, not only one headlight on all over her.

  Is there a thing if I want to leave this thing on?

  Thanks in advance for any help.

  I think that I understand the question. I pass the advanced power settings, scroll down and expand your sleep, then hibernate after. Choose one of the numbers and reduce the number as if you would go to 0, which actually appear as 'never '.

• I need software for my tvphotoviewer of microsoft

  Windows XP, need software to set up disk for microsoft Viewer.

  Hi Joseph,.

  Thanks for posting this question in the Microsoft Community.

  When the product has been purchased?

  I'm sorry to inform you that the support for Microsoft TV Photo Viewer has been arrested since 2006.

  Here's another link with information about unable to find the CD or the floppy disk for the installation.

  Please do not hesitate to ask any questions in the future on Windows. We will be happy to help you.

• Satellite A - need software for keys FN on Windows 7

  Hello

  Where can I find software for the FN keys?

  I mean the toolbar on the top view in Windows. I have it on Vista, but now I have seven and can't find it. Sorry for the bad language. THX

  Hello!

  The toolbar on the top which view control the FN keys is called value added package. You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  At the present time, you will only find the version for Vista, but maybe it works also on Windows 7. Just test it and post your result. I think that it is interesting for other users.

  Good luck!

• Need software for disk external gigastore

  Hello

  I lost my CD software for the disk external media center gigastore and software password... Can someone tell me where to download them? I hope you can help me!

  Thanx Markus

  Hello, Markus

  Before arriving at the idea of asking this question have you checked if this software is available on Toshiba support and download page under http://eu.computers.toshiba-europe.com > support & downloads?

  Of course, under product Type Choose Options & accessories.

• Need help for remote management and SBS 2003.

  I can manage the server remotely, but try to make the computer customer is a bust. don't know if I'm missing a plugin or something else. all customer mailboxes are XP sp3.
  Do you need a SMS server just for 7 boxes?  Go ahead, change is grouped bot not SMS?
  IDK, I inherited this network.
  I can install 3rd pty software on all the boxes, but then why do I a remote on the server management option?
  I'm confused & pretty angry atm

  Your question would be better in the Technet forums where the network and system administrators to wander and have a lot more experience with Small Business SERVER 2003: http://social.technet.microsoft.com/Forums/en-us/categories/

  RDP ports are open on the XP boxes? The RDP service runs on them? I'm not too familiar with it on SBS, but could check those.

• Requirement of software for Configuration Management Agent

  Hello guys,.

  I saw in vcenter_configuration_manage_ 54_hardware_software_requirements_guide .net 3.5.1 is required on the managed client. Does this mean that I need to install on each computer I want to run before deploying the agent, or is it embeded inside?

  My understanding is that .NET is only necessary if you plan on enjoying the features software Provisioning in VCM.

  If you have no interest in SWP, then .NET 3.5.1 is optional on the side of the agent and you should have all of the features available to you (less SWP).

  If you ARE interested in SWP, then Yes, you need to at least have .NET installed 3.5.1 BEFORE you deploy the client VCM.  If the installation of .NET occurs after the installation of the agent, agent VCM has trouble reading version information, something weird like that, and you will need to reinstall the agent for him to pick up.

  Due to such license agreements, VMW can redistribute .NET package so it is NOT embedded.

• Need software for WRT54GS

  I need to reinstall my WRT54GS but cannot find the original disk. Is there a place I can d/l the software installation? I can find the firmware updates, but I think more than that, I have to install the router. Thank you.

  Hmmm... interesting.  Just do a "factory reset" on your router and will change the name of user and password by default in your guide of the user, and then you'll be able to connect to the web GUI with 192.168.1.1 again.  After a 'factory reset' you have to reenter your settings, because it sets everything back to default settings.  If you have a cable modem, be sure to clone the MAC address once again, etc, once you have reset your router.

  You should really go to the Linksys support site and download the user guide for the router.  You simply enter your model number and the version number of material (on the router), and you can also download the latest firmware from there.  The user guide has all kinds of information in this document, such as how to do a reset, how to connect, the settings of all them mean, how to upgrade the firmware, etc..

  In General, to upgrade the router, all you have to do is update the firmware.  Your ISP may have additional requirements for a connection, either, but the router is just the upgrade of the firmware, followed of a factory reset.

• Officejet 5610: Need software for the all-in-one Officejet 5610 on Windows 7 64 bit

  We have an Officejet 5610 all-in-One that we bought when we always used Windows XP.  We bought a new computer with Windows 7 64 bit and I was wondering what are our options to acquire the appropriate software. We can order a replacement disc, if it is necessary, but wanted to know if there was another option first. What we need is the ink levels monitoring program management system, etc. We do need the other stuff. Thank you.

  Hi there @PaulD_0459 , welcome in the community

  You won't have to order a new drive to install your Officejet 5610 on your new Windows 7 system.

  You can download and run the installation from a download. Here is the direct link to that get you there and get started: HP Deskjet and Officejet full feature software and drivers

  I hope that you, helps to have a wonderful day

• Satellite L20-101: need drivers for videos, audio etc.

  I just reinstalled the operating system (win xp home) on a satellite L20-101 and I realized that I have no cd of drivers for the laptop. The following are marked with problems in hardware devices (Panel): Audio controller, modem, SM Bus controller, PCI controller, USB controller, and video controller. Anyone know what to do or where I can find these drivers? What I found on the toshiba site has not helped me.
  Thank you

  HI Dan,.

  Have you installed the operating system from the Toshiba CD/DVD or is it a complete installation on the Microsoft product CD?

  Kind regards

• Re: Satellite C660 - need software for keys FN for XP

  I bought the laptop Toshiba Satellite C660-a9k.
  I found all the drivers & configure Windows XP SP3.

  Can't find the FN keys software support for this model for XP.
  I tried common module + controls C650. It does not work.
  There is no package of added value for XP.

  Also the computer does not wake from sleep.

  Please advice.

  > I found all drivers & configure Windows XP SP3.
  Very interesting article. I found the support page for your model of laptop and when I click on drivers and choose WXP operating system almost nothing is listed.

  This model of laptop is not supported for WXP and configuration of Windows XP complete home edition will be very problematic.

• L20-197: need drivers for audio, video, after upgrade to Win XP Pro SP2

  I just updated the operating system (win xp) family for win xp pro sp2 on a satellite L20 - 197 and I realized that I have no CD or drivers or the laptop. The following are marked with problems in hardware devices (Panel): Audio controller, modem PCI controller SM Bus controller and video controller.
  Anyone know what to do or where I can find these drivers?

  What I found on the Toshiba site has not helped me. Really, I installed win XP pro sp2 several times, but I never have problems with the driver. Can someone tell me where I can find the driver for all devices on the internet of this?
  Thank you very much.

  Post edited by: ongata1

  Hello Volker

  The driver for Windows XP Home edition Professional and family are absolutely identical. All the drivers you can find on http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp, you can use but please install them in the correct order.

  Pleas it follow this document http://support.toshiba-tro.de/tools/Satellite/sl20/win-xp/install-xp-na-en.zip

  Good luck!

• Satellite ct 210 - need software for this

  I have one of those old laptops, and I can't find any support or downloads for her to www.toshiba.com.
  I bought one of these 210ct and it has been formatted when I got it. I saw him when he still had bones in it and it worked perfectly.

  Now when I start it upward, it begins, and then it beebs 3 times and turns off. I tried to access its bios with the esc key, but it did not work. the only thing I got the job, was pressing f12 several times and then it beebed only once and has not extinguished.

  Laptop screen does not show anything so I connected it to my desktop screen and then I got the text: ready for the update of the bios. I tried to boot it from a floppy disk too, but it did not help. Maybe I should update its bios, but I couldn't find it anywhere.

  What should I do?

  Hello

  If you hear a long beep unusual (or several beeps) when you put the laptop first, your system is trying to tell you something and it is not good. ;(
  While the normal beep before boot - one short signal - is a universal ' OK' sign, the diagnosis more elaborate beep codes are not standardized; They vary depending on the BIOS manufacturer and are sometimes further customize by motherboard manufacturers.

  You will have to consider the meaning of a specific model of beep. On some systems, for example, one beep followed by a pause and then two beeps means that the graphics card is not working properly perhaps she has not placed correctly.
  This might be a reason why your laptop does not power upward and nothing appears on the screen.

  I got this Toshiba document on the loan for the update of the bios message but I put t know if it will help you:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlView.jsp?soID=691202