Need software for disk external gigastore

Similar Questions

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html

• I need program for disk defragmentation

  I need program for disk defragmentation

  XP has a built in Defragmenter; However, if you are looking for a free third-party defragmentation tool, you could, for example, Auslogics Disk Defrag or Defraggler.

• I need software for my tvphotoviewer of microsoft

  Windows XP, need software to set up disk for microsoft Viewer.

  Hi Joseph,.

  Thanks for posting this question in the Microsoft Community.

  When the product has been purchased?

  I'm sorry to inform you that the support for Microsoft TV Photo Viewer has been arrested since 2006.

  Here's another link with information about unable to find the CD or the floppy disk for the installation.

  Please do not hesitate to ask any questions in the future on Windows. We will be happy to help you.

• Satellite A - need software for keys FN on Windows 7

  Hello

  Where can I find software for the FN keys?

  I mean the toolbar on the top view in Windows. I have it on Vista, but now I have seven and can't find it. Sorry for the bad language. THX

  Hello!

  The toolbar on the top which view control the FN keys is called value added package. You can download the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  At the present time, you will only find the version for Vista, but maybe it works also on Windows 7. Just test it and post your result. I think that it is interesting for other users.

  Good luck!

• Need software for WRT54GS

  I need to reinstall my WRT54GS but cannot find the original disk. Is there a place I can d/l the software installation? I can find the firmware updates, but I think more than that, I have to install the router. Thank you.

  Hmmm... interesting.  Just do a "factory reset" on your router and will change the name of user and password by default in your guide of the user, and then you'll be able to connect to the web GUI with 192.168.1.1 again.  After a 'factory reset' you have to reenter your settings, because it sets everything back to default settings.  If you have a cable modem, be sure to clone the MAC address once again, etc, once you have reset your router.

  You should really go to the Linksys support site and download the user guide for the router.  You simply enter your model number and the version number of material (on the router), and you can also download the latest firmware from there.  The user guide has all kinds of information in this document, such as how to do a reset, how to connect, the settings of all them mean, how to upgrade the firmware, etc..

  In General, to upgrade the router, all you have to do is update the firmware.  Your ISP may have additional requirements for a connection, either, but the router is just the upgrade of the firmware, followed of a factory reset.

• Sat L20-102: need software for power management

  Hi, is there, a L20-102 Sat power management software provided by Toshiba? I can't find Power Saver for my model to download driver...
  With the standard windows power management, I have to manually reduce brightness when you go to the battery and the occasional fan runs at max speed for a second and then slows down the acceptable level, runs for a few seconds and then turns off...
  These "rpm max" chips are quite boring :(

  I see Power Saver has plenty of features, and probably he ' d suite my needs, but it is unavailable :/

  Is there a good alternative?

  Hello

  I know it sounds strange but your unit is pre-installed without intelligence tool. This is the reason why you can not find on the Toshiba download page. Please don t try to install this tool, designed for another unit, because you may have some trouble and many error messages. As far as I know all the tools must be adapted for each laptop model.

  On some devices, this tool only works if other components are installed. I guess L20's budget unit and for this reason, it isn't stuff as on other units.

  Good bye

• Re: Satellite C660 - need software for keys FN for XP

  I bought the laptop Toshiba Satellite C660-a9k.
  I found all the drivers & configure Windows XP SP3.

  Can't find the FN keys software support for this model for XP.
  I tried common module + controls C650. It does not work.
  There is no package of added value for XP.

  Also the computer does not wake from sleep.

  Please advice.

  > I found all drivers & configure Windows XP SP3.
  Very interesting article. I found the support page for your model of laptop and when I click on drivers and choose WXP operating system almost nothing is listed.

  This model of laptop is not supported for WXP and configuration of Windows XP complete home edition will be very problematic.

• Satellite ct 210 - need software for this

  I have one of those old laptops, and I can't find any support or downloads for her to www.toshiba.com.
  I bought one of these 210ct and it has been formatted when I got it. I saw him when he still had bones in it and it worked perfectly.

  Now when I start it upward, it begins, and then it beebs 3 times and turns off. I tried to access its bios with the esc key, but it did not work. the only thing I got the job, was pressing f12 several times and then it beebed only once and has not extinguished.

  Laptop screen does not show anything so I connected it to my desktop screen and then I got the text: ready for the update of the bios. I tried to boot it from a floppy disk too, but it did not help. Maybe I should update its bios, but I couldn't find it anywhere.

  What should I do?

  Hello

  If you hear a long beep unusual (or several beeps) when you put the laptop first, your system is trying to tell you something and it is not good. ;(
  While the normal beep before boot - one short signal - is a universal ' OK' sign, the diagnosis more elaborate beep codes are not standardized; They vary depending on the BIOS manufacturer and are sometimes further customize by motherboard manufacturers.

  You will have to consider the meaning of a specific model of beep. On some systems, for example, one beep followed by a pause and then two beeps means that the graphics card is not working properly perhaps she has not placed correctly.
  This might be a reason why your laptop does not power upward and nothing appears on the screen.

  I got this Toshiba document on the loan for the update of the bios message but I put t know if it will help you:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_dtlView.jsp?soID=691202

• Need software for camcorder CAMILEO PRO

  I bought a camcorder PA3620E-1CAM (Camileo pro) at auction recently, but when I got home, there was no software/driver CD in the box.
  Does anyone know where I can get one please?

  Hello

  Visit http://eu.computers.toshiba-europe.com > support & downloads

  Types of product options
  Digital Imaging family
  Range of digital video cameras
  Model-... and so on

  There, I hope that you will find what you need.

• Re: Need software for Satellite M35

  Recently, the laptop I'm using crashed and the HARD drive needs to be replaced. However the impossible to configure the new HARD drive without the Toshiba software. Please let me how can I get it or download it. The details of the computer is less.

  Make: Toshiba

  Model: Satellite

  Model No.: M35-S320

  Serial number: 34129082P

  Part #: PSN304-7100QV

  Hello

  Everything you need you can find on http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

• OfficeJet Pro8500: need software for Hp Solutions Center

  Attempt to analysis with the software and get messagae my printer has been disconnected

  Remove all software and reinstalled.  Scan now worked but when I tried to print nothing appeared in the queue

  Remove all the software several times and finally I can print from work, outlook, internet etc.

  But now I don't have the software so I can scan from my pc.  I think it is called HP Solutions Center.  Cannot find how downlaod just this part so I can scan from my pc.

  I don't want to disconnect the pc from my printer and do it again because maybe printing does not work.

  I want to just as the software.  How can I download it to my pc so I can run if I use the HP Solutions Center.

  It is difficult to work with HP.

  Hi @Iowagal40,

  Welcome to the Forums of HP Support!

  I understand that you would like to know how to scan using your HP Officejet Pro 8500 printer. I will definitely do my best to help you.

  What is the name and the product number of your printer? How can I find my model number or product number?

  It seems that there are problems with software of printer on your computer, in order to solve this problem, we would need to do a clean uninstall and re-install. You must unplug the printer to the USB port during installation.

  If you do not want to do, there are other ways that you scan using these workarounds.

  Use these workarounds to analyze whether the solutions did not resolve the problem. Workarounds may not be available depending on the printer and your connection type. If the first method you tried didn't work, try one of the other workarounds.

• Officejet 5610: Need software for the all-in-one Officejet 5610 on Windows 7 64 bit

  We have an Officejet 5610 all-in-One that we bought when we always used Windows XP.  We bought a new computer with Windows 7 64 bit and I was wondering what are our options to acquire the appropriate software. We can order a replacement disc, if it is necessary, but wanted to know if there was another option first. What we need is the ink levels monitoring program management system, etc. We do need the other stuff. Thank you.

  Hi there @PaulD_0459 , welcome in the community

  You won't have to order a new drive to install your Officejet 5610 on your new Windows 7 system.

  You can download and run the installation from a download. Here is the direct link to that get you there and get started: HP Deskjet and Officejet full feature software and drivers

  I hope that you, helps to have a wonderful day

• I need software for my ethernet connection to my internet

  Where can I get software to reinstall the driver for my ethernet connection

  The computer manufacturer driver support website...

• need software for HP PSC 1510

  I have a HP PSC 1510 copier that has been given to me, but they do not have the software. Can I get the software from somewhere so that I can use this Copier?

  You can download the drivers for the PSC 1510 of the site Internet HP here.

  Kind regards
  Bob Headrick, Microsoft MVP printing and imaging