Sat pro is disable
Help, please!
My satellite pro began to fade. The two first time it happened to the machine has been very hot, and I thought it was the switch. Now however it has started to do when the computer is not hot. Do I have a virus, or is it mechanical failure? Help me please!
Thank you
Hello
If your notebook is power itself off instead of doing a controlled stop, then it is more likely that the CPU is overheating. Are your cooling fans run very fast before closing? If Yes, then it is likely that there is an accumulation of dust and other debris in the heatsink from the CPU. Try to blow through the gate at the back of the notebook to clear the accumulated dust.
If the fans do not work, then you can have a hardware problem that needs the attention of a qualified Toshiba service agent.
It is unlikely that you have a virus since it will manifest itself in as well in other ways, more a sudden increase in the use of the CPU or other undesirable effects.
HTH
Tags: Toshiba
Similar Questions
-
Sat Pro L10: Disable the wake on lid sensor
I have a Satellite Pro L10 and disable all power on/set off the power of the actions that occur when the lid is closed - that's very well under windows, and I have disabled things sur-cloture in the power supply of the control panel section. BUT in PARTICULAR, I want to disable the automatic turning on when the lid is opened (i.e. a Bios or other material toshiba parameter). Where can I do this?
Hello
I think that light will be activated if the device is in stand-by or hibernation mode. If you open the cover, the device starts automatically.
If the device turns and you close the lid that nothing will happen if you defined any action. I think that just display will be switched off, but after opening the lid he display will be activated immediately.
Auto lights up when option doesn t open cover exist.
Good bye
-
Sat Pro P870 - Downgrade of Win7 - can't find driver for USB controller
I just bought a new Sat Pro P870 PSPLFA-O1C001, which comes with Windows 8 and no downgrade disc.
The customer wants Windows 7 Pro, so bought the software & made a new installation. I downloaded & installed all the appropriate drivers from Toshiba site http://www.mytoshiba.com.au/support/computers/satellite/p870/psplba-02k00s/download?os=25
But I still have a "other devices" - (USB) Universal Serial Bus controller.
Hardware ID are:
PCI\VEN_8086 & DEV_1E31 & SUBSYS_FF1E1179 & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_FF1E1179
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03
Name of the physical device object is:
\Device\NTPNP_PCI0003Anyone able to tell me what is this device?
Thank you
I put t know if this will help but try please install THIS driver.
Please post comments.
-
Hello
I have a Sat Pro A10.
My problem is that my screen is so dark, that I can't see the content (maybe it's the backlight?). However when the computer starts, I can see the login screen of Toshiba fine. I also have the image if normal poster if I close the lid, and then open it. However the screen will stay only normal for a few seconds.
Anyone have any ideas what is wrong here? Why does the screen work at boot and then deceive you? Is this a hardware or a software problem?
Any help would be great.
Hi Alex,
It sounds like a problem with your inverter FL. You will need to take your laptop to a partner of Service allowed for it to be repaired or replaced.
Kind regards
-
Restore media for a Sat Pro A10
Hi, I lost my press kit for my Sat Pro but unable to download the drivers from the support site... everytime I try I just get a message saying that the file is not found. Can I download an ISO of the restore media, or someone can look at the download page for this laptop.
Hello
First of all, you can not download an ISO of the Toshiba Recovery CD image file!
You can buy the CD of restoration but not download.If you wish, you can contact the ASP in your country and ask for this CD. It s not expensive.
Regarding you driver problem;
Well. I have checked the page of European disc of Toshiba and was able to download drivers for Satellite Pro A10.
So I know exactly why you can't download the drivers but there is nothing wrong with the page. -
SD slot, it doesn't on my Sat Pro M30
Hi guys,.
I'm having a problem with my SD slot, it doesn't. I checked my device manager and I found it in my device list, I have troubled shoot for problems and appear nothing wrong with it.I insert the meadia card in the slot and I have the blue light flash once then it shuts down. I check Explorer if I can find a new driver was added and I'm not finding.
Y at - it software or drivers I should have to get this working or what?
Thanks in advance guys.
Sat Pro M30
Hi aks
Try reinstalling the SD Card Driver Set V2.0.4. You'll find the CD-ROM of tools & utilities.
-
Noisy dvd/cdrw drive Sat Pro A100
Hello
Ive just got my new laptop A100 Sat Pro and check that everything works
I noticed that when accessing a dvd in the dvd/cdrw Mat * one player combo UJDA770
He is much stronger with pronounced sounds/cries as he accessed but subsequently, he
can play a movie dvd without much noise. Including these noises ar not when a cd is
in the drive.I am new to laptops, and I don't know if this is normal because the disk is so small?
You could someon please let me know if this is normal or not?
Thank you
Kevin
Hey Kevin,
As you can imagine, it's not easy trying to diagnose noises without being able to hear, but there are various noises emanating from the optical drives depending on what they are doing both.
These sounds are usually a slight noise whirring when the disc actually rotates. applied by a series of light clicks as the lens unit is positioned to read the titles of the index. Once this has been done the unit should return to its noise whirring normal light as the disc is read progressively.
However, some drives, including the data (games or software) will produce more evidnet clicking and rattling from the unit of the lens are having to constantly reposition themselves in various locations on the drive.
In addition to the above, some discs are not quite concentric and this can set up a slight oscillation of the disc as it spins. This will be evident by a distinct rumbling noise as the disc rotates.
If the device emits a loud noise then it will normally indicate a contact between the disc and a part of the possible training of the lens or the drive nut. This is definitely not normal and if this occurs several times and on different disks, then I'd have the optical drive, checked by a Toshiba ASP.
Kind regards
-
Sorry for my bad English.
If the cmos of laptop battery (I have a sat Pro 6100) is damaged completely, the laptop also ignite?
Hi Biagio,
The RTC (or CMOS) battery is installed on the motherboard, and is used to keep the BIOS settings when the laptop is turned off. If the RTC battery is faulty then the date/time and other parameters of the BIOS only be not maintained when the laptop is shut down for a while.
The normal battery will be affected by the failure of the RTC battery and will always recgarge as usual when the laptop is connected to a power source.
The RTC battery can be charged by connecting the power supply but leaving the laptop off for about 24 hours. If the date and time is always lost after that the RTC battery should be replaced by an authorized Service Agent Toshiba.
HTH
Post edited by: NickyNoogle
-
Windows XP system is unstable and slow - Sat Pro A10
Do not know if I have a Windows or a HDD problem :/
Systems have become unstable a few days ago and started to slow down. Finally started getting delayed Windows disk write errors.
Current situation is that Web pages with javascript on them don't work (windowsupdate, ms webmail sites), and some local programs seem not to launch (information system).
Tried the upgrade of IE. I tried MS supports javascript trobleshooting. Run the check disk and defrag of many times.
Think to take (Sat Pro A10) in a repair shop, but not 100% convinced that it's the hard drive that I can't find anything that verifies records that suggests a problem :(
Any help?
Hello
Just a little tip: one day, when you have time, you can search for HDD Regenerator tools on the net. With this tool, you can check if the HARD drive is OK. It is always good to know that the disc has no bad sector HARD and because of this cause, to slow down the pace of operational or OS even total crash.
-
Sat Pro 4270: Compatible CD/DVD Rom
Can someone advise on a compatible dvd DVD / CD RW drive for Sat Pro 4270
Hello
I found on the official website of Toshiba these devices:
Read-only Drives
Ext. Slim Line 24 x CD-ROM Drive PX1052E-1NMD
Ext. Slim Line 8 x / 24 x DVD Drive PX1053E-1NMDWritable discs
Ext. Slim Line 8 x / 8 x / 24 x / 8 x Combo Drive PX1055E-1NST
CD-RW/DVD Rom Drive PA3438U - 1 external CD 2
External DVD Super Multi Drive PA3454U-1DV2If you wish, you can visit this site:
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?
Good bye
-
Need a DVD/CD-RW player in-house for Sat Pro 4270
I have asked this before, but did not drive
I need a drive DVD/CD-RW internal for Sat Pro 4270
Can anyone advise a specfic drive that will workHi Charles,
Please check the following URL: - (click on DISKS for information.)
http://www.morsenet.com/www/frameset.asp?top=end_user.htm&main=http :// www.morsenet.com/www/drilldown.asp?node=464437
Kind regards
-
Re: Sat Pro A10 and Sat 10 - the difference - need new keyboard
Hey all!
New ID as I am garbage to remember the passwords/log on emails...
I have a Satellite Pro A10, which needs a new keyboard - there's loads are circulating on ebay for Satellite A10 - but not the Pro - now I'm almost 100%, it'll be the same keyboard - right? the 'Pro' ILO denounces just usually extras bits and things qhizzy-, but basically they are the same hardware platform slot - i.e. the same keyboard between the A10 Sat and Sat Pro A10
Anyone?
: D thank you in advance for letting me sleep at night!
I agree with you. There is not much difference, and the construction of the laptop is the same.
I'm 100% sure that the keyboard is the same. -
To replace the hard drive on my MacBook Pro, I disable Photoshop 6, and I believe that I have disabled my Photoshop 5.5 (Adobe Creative Suite 5.5 Design Standard). Supposedly if you turn into a sequel they will disable all. I could, through the Adobe Web site to download and install Photoshop 6; but the Adobe Creative Suite 5.5 Design Standard is not put at my disposal for download. Any suggestions?
Joseph, here is the link to Download CS5.5 products
Let us know if you need help with it.
Atul_Saini
-
How do I turn OFF the fn on Sat Pro C660
Hello
I have a satellite Pro C660 PSC1ME and I was wondering how can I disable the "FN" key to prevent others to pass the wifi and disable the mouse (it's a mobile multiuser).
Thank you
All you can do is to completely disable the flash cards. The option that you can find in the settings for Flash cards (screenshot).
That s all you can do.
-
is indicated by the documentation of edgetech corp, I bought a 1 GB PC 2100 DDR SO DIMM Toshiba OEM KTT3614 memory.
After installation, the laptop does not start correctly showing a blue screen with the following message:page-fault-the-area non paged
so the problem with the win32k.sys file
the with the file ati2dvag.ddlthen the following error IRQL not less or equal
Start and shut down in a continuous sequence
I have updated with the latest version of the BIOS, but the computer does not start correctly
Need help
Thank you
My computer is a 01L00XFR SAT PROA60 PDA 65F with Windows XP pro[Edited by: admin]
Hello
The easiest way to see if the error occurs due to the memory card is to remove them and restart the unit. If the unit works properly without resend memory.
I found what RAM modules are compatible with your device:
256 MB (PA3311U - 1 M 25)
512 MB (PA3312U - 1 M 51)
1024MB (PA3313U-1M1G)All modules of this are tested with your laptop model and they should work fine.
Good bye
Maybe you are looking for
-
swapping of ram on mid 2012 Pro
So im crossing my ram from 4 to 8 GB, and I wanted to know how my apps and files will be saved when I do the Exchange? do I have to set up a backup? not really knowledgeable about this stuff.
-
you have a way to block access to the port of dell co.to my computer?
Dell continues to shut down my computer dell laptop to force services on me.i don't except services so that they freeze or crash my computer.just obtained through reinstalling but it should block dell to access my computer when ever they want.i think
-
Simple pass stopped working all of a sudden
Simple passage no longer works, on my windows laptop 8.1 Envy 15 j009wm, suddendly today. HP Recovery Manager and tried to fix it, but it did not work. When I manually click Simple passage, it does not... ie the page starts to come, but then it flash
-
I was able to open it in the past with XP and some computers with Windows 7.
-
Unable to phonelistener pushscreen
Hi all! Please help me with the following problem. I created an application that runs in the background at startup. I want to push a screen when a call is disconnected. I added a phonelistener and writing callDisconnected (callId) method. This method