SATA ports enable Compaq Bios Rev 3.15 Presario1230NX

Similar Questions

• HP ENVY 750-115no: add extra SATA port

  I would like to expand with one or two SATA ports to connect additional hard disks.

  Tested a PCI controller card, but it has been discovered at startup, or by the operating system. Having checked that the PCI slot is enabled in the BIOS settings.

  Question:

  Which controller card will work? Any suggestions? I could order one of HP?

  If you just need a data reader, use an external USB 3.0 to Sata Drive enclosure.

• PowerEdge 2900 on board sata ports

  I have a PowerEdge 2900 server and would like to put in a single spare 2 TB SATA for additional storage (non-critical).  The motherboard has two onboard SATA, A & B ports.  When I try to connect the drive onboard SATA ports, the BIOS does not detect anything, and when I change the type 'Auto', save the settings and restart settings are not stored in the BIOS.

  I don't know if the SATA motherboard ports supports hard drives, or if there is other reason things do not work.  I tried different cables and tried the drive in another computer, and everything works fine in another computer.  Plan to put in some additional SAS drives in the drive box, I'm looking for an intermediate solution.

  Any help is appreciated.

  Thank you
  Josh

  I've seen this same problem and fixed it. He must go to "Shipped" in the bios and enable "Onboard Sata".

• e-sata port

  my e-sata port no longer works, it does not recognize the bios, it works fine via usb, I bought a new speaker/interface, it is not that I ordered a new cable which will be here next week, will then check back in. Does anyone have any ideas?

  Thank you

  Thanks for the reply but the problem is solved, I just went to the mailbox and the new e-SATA cable was here, I plugged it and everything worked perfectly, it's hard to believe, but it was the cable.

  Thanks again

  Ross

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• Z200, multiple SATA ports can be designated for eSata?

  I have an eSata card 2 model (which feeds my Z200 via SATA motherboard). 5 SATA port is configured to use eSata in the BIOS and works as it should. I tried the second port of routing ports SATA 3 and 4, however any eSata device that will not recognize without a reboot. It seems I can only specify a port to be a port "eSata". I use Windows 7, 64-bit as OS.

  Is my question, possible to use multiple SATA ports as a port eSata on the Z200? It works fine on the Z800 I (I don't have yet to specify what are the SATA eSata ports, will work all available ones I use).

  Thanks in advance for any help,

  Hello

  Try HOTSWAP.  It works fine as it forces a rescan of material.  You another alternative is to use the function analysis of new hardware in Device Manager.

• This hard drive is compatible with my laptop? Apple 80 GB HDD 3.5 SATA for my Compaq CQ62, the hard drive that I have for that one is a "WD 500 GB 2.5 SATA II.

  I plan to buy an Apple 80 GB hard disk 3.5 SATA for my Compaq CQ62, the hard drive that I have for you is a "WD 500 GB 2.5 SATA II.

  Ports appear as it will keep and everything, but I'm curious to know, if I get this drive, I'll be able to install my Macintosh on that hard drive and use it on my laptop Compaq CQ62 or not?
  If this isn't the case, then I'll be able to install Windows 7 or uBuntu on this hard drive? The hard drive will fit even on my laptop? Thank you!

  Why you want to replace a 500 GB with a 80 GB drive it?

  Macintosh is not an operating system

  A 80 GB drive is too small for a win7 PC

• Sandy Bridge (mobo Cougar Point) on p6780t - which SATA ports?

  There are 6 SATA "ports" in my HP p6780t, and I understand that only four SATA II (Rev 2.0, 3.0 Gbps) ports that are affected by the problem of recall of Cougar Point.  On the motherboard, I see four SATA connectors to real (labeled ports 1-4: blue, white, clear, and orange, respectively) and two empty spaces reserved (ports 5 and 6).  Anyone know which ports are ports SATA III (Rev 3.0, 6.0 Gbit/s)?

  Since I do not plan to use more than two connectors, one for the hard drive and the other for the optical drive, I would rather identify the ports assigned to go through the hassle of return computers.

  For clarity, I will use the physical labels located on the motherboard.  (Physical tags are turned off by how they are numbered in the software and in the diagrams).

  According to the usefulness of Gigabyte and patterns, both good SATA III ports are those who is physically marked 'SATA 1' and ' SATA 2 "- these are two ports, turned to the side to hard drives and are dark blue and beige and white color respectively.". "  Out of the box, all you have to do is to move the connection from the DVD of the 'SATA 3' (light blue) port for the "port SATA 2."(beige/blanc) ".   Cable is a little tense, but there is just enough length to it.

• ESXi 3.5 does not start after the failure of the card mother SATA port 0.

  I have a DELL PE1800 with ESXi 3.5 U3 Server installed on HD1. The card mother port SATA 0 failed. I bought a new sata, Rosewill RC-218 controller card. Installed and attached hard drives. Configured the BIOS to disable the integrated and restarted sata controller. Now ESXi 3.5 will not start.

  My old configuration has two hd with ESXi 3.5 U3 on disk 1 and my VM on disc 2. Now no drives are seen by ESXi 3.5. Yet see bios of them.

  Todd L.

  Another thing you could try is to install ESXi on a USB key. http://www.yellow-bricks.com/2008/07/29/ESXi-35-update-2-on-a-USB-memory-key/

  Plug your storage space on good sata port. I have an eye for a sata controller from dell PERC 5 can be had quite cheaply on ebay and others.

• Format HP G1 280 Microtour: HP 280 G1 SATA Ports

  Can someone tell me how many ports SATA is on the motherboard in HP G1 280 Microtour format?

  I already know that the PC has 1 external 5.25 "Bay and 2-Bay internal 3.5" x.

  @t0m

  According to the documentation I looked there are only three 3 SATA ports.  See the image below.

  

• Memphis-s SATA ports

  I have a Pavilion of 500 - 205t with Memphis-s motherboard.  It has 4 SATA ports with different colors.  What do the different colours mean?  Is there a documentation available for the PC that describes this?

  Thank you.

  Hello again,
  
  Yes, the paper suggests so.
  But if you have just one hard drive that it doesn't matter at all.
  
  However, if you have several hard drives connected, you must use port 0 for training with the operating system installed on.

• SATA ports on MS-7613 motherboard (HP G5370uk desktop PC)

  Hello world

  I have a PC HP G5370uk desktop (but with processor i5, new graphics card, and improved memory).  My next planned upgraded is a SSD and Windows 8.  I know the different shift than the races of motherbard SATA2 3 Gb/s, so I won't get all the benefits of a 6 GB/s SSD, but I'm happy with that for now.

  It's the map page mother HP http://support.hp.com/us-en/document/c02014355

  My question is, when I watch the news (from HWiNFO64) SATA, it is said there are #0 à #5 SATA ports, but I see only 4 ports on the motherboard.  And he also said that they run interface speeds.  Is down to devices that I've connected, or will they run all 3 Gbit/s, no matter what I plug into wise SSDS.  If this isn't the case, that plug in to for best results.

  Thank you very much in advance for any advice you can give

  Sean

  The jury only has 4 ports of 3 Gbit/s SATA2, numbered from 1 to 4 according to the scheme.

• HP Pavilion a6667c: HP Pavilion a6667c, install the HARD drive to the SATA port

  My question is: is it OK to install a hard drive extra (in this case, my old laptop drive) in one of spare SATA ports on the motherboard? My first two is taken over by my first hard disk and the optical stock.

  You can add the disk as a data disk. This tray will work. Data cable  

  The power supply should have additional Sata power lead.

• Lenovo g550 20023 HDD SATA port type of model?

  Hello

  I want to change my HARD drive, because it is broken and I need more info on my laptop Lenovo SATA port (G550 model 20023). I need to know if it is of type 1 SATA / SATA-150 or so is SATA II / SATA-300.

  Also please tell me if it is possible to upgrade to an SSD? Thank you.

  Kind regards

  Hi again,

  The topic can be closed. I contacted Lenove hotline.

  For all those who need this info: this is a port of type SATA II.

• m.2 port removes one of the sata ports?

  the Aspire xc - 710 has two standard SATA ports and one port m.2.

  Using the port of m2 for storage of solid state stops ONE of the work's native sata ports?

  i.e. There are THREE ports on the motherboard for three devices... or it's TWO ports that can be shared between THREE devices?

  Thank you

  Hello

  No, you have 3 ports available and 'independent': 2 SATAs x and 1 x 2280 m2. You can connected 3 devices.