m.2 port removes one of the sata ports?

Similar Questions

• Jerkyness Microsoft Mouse 5000 fixed when I remove one of the batteries.

  I posted a response on this forum in March on my Microsoft 5000 mouse is jerky because I had two anti virus running packages (not that I know of) and he improved after that I removed the Bit Defender. Well he began acting again last week and he started acting jerky again. First, I replaced the batteries and no luck. Then I tried various system settings (disabling services, stop the anti virus, etc.) also with no luck. Finally, by mistake, I took out one of the two batteries and the mouse is smooth as can be.   It seems that this mouse works fine with one battery but gets all jerky when there two batteries in it. Does anyone know how this can be?

  Hi Mho1948,

  I suggest that you contact Microsoft Hardware support for more information.

  http://www.Microsoft.com/hardware/en-us/support

• Remove one of the two iTunes I not use in my computer

  Windows Vista EDITION Home Premium: in my computer, I have two iTunes programs that the administrator user and the other in a normal users. We do not use the one in the title of the administrator. We only use one of the user. I already checked that all songs in iTunes of the user are located within this user. Can I delete the iTunes of the administrator user program without affecting the program iTunes to another user?

  N °

  On all versions of Windows, the programs are installed by the administrator and are then available for the rest of the users.  If the administrator uninstalls, the program went for everyone.

• How to remove one of the elements of operating system of Windows Start menu?

  Original title: choose an operating system to start, or press Tab to select a tool. _ (use the arrow keys to highlight your choice, then press enter) windows Vista__Microsoft windows Vista __Microsoft

  How to remove 1 of the operating system for each time I start the computer, I dun hv to click on the 1st system?

  Thanks for the help

  Hi the user Noob,

  We recommend that you remove the entry that allows Windows to start successfully. Microsoft Windows Vista (C:\Windows) is the default. You can remove the second entry and check the result (delete if it does not work).

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I remove one of the double AdobeIDs on my iPad?

  I bought an e-book and when I tried to transfer it to my iPad I get the error message that the application is allowed with two user accounts (the one that is the same AdobeID I used in the download, and which is obsolete - my old e-mail address of company). How can I delete the wrong / obsolete AdobeID on my iPad? (Or whatever is necessary for me to transfer the eBook file to iPad)

  Hi Skogshildur,

  In order to remove the Adobe ID completely, please Contact Customer Care

  Don't forget to stay signed with your Adobe ID (email address) before you access the link above*.

  Select the exact options indicated below in the capture to get support of screen options:

  

  Please write to us if it helps.

• Ss12, time remapping: how to remove one of the multiple time zones?

  Ss12 has the time remapping effect, which is excellent.

  I remapped a clip, featuring several "zones" in slomo.  After clicking on the + sign to create the last zone, I realized that this was too many, and not really quite the same concept as the other.  I had not yet dragged the border to create any length.  But there seems to be no way to remove it, delete or cancel the action of having created it.  "Reset" to delete all time zones.

  I could leave it as is, with a normal attribute of the time full speed.  But it is sloppy and let this kind of artifact behind in any type of program or project can turn against you.  If this is not an option.

  I could delete them all and start over.  But it would be a lot of work and would not be closer to the fundamental issue, which is to know how to delete or cancel one time zone.

  Any suggestion will be highly appreciated.

  Kawika808

  The first thought that comes to mind was to put on 'Normal' for the time zone of interest here.

  But there is an easier way... at the top right corner of a block of time zone is of x. Click to close and to get rid of this particular time zone.

  Please let us know if none of this works for you.

  Thank you.

  RTA

• can I remove one of the keys on my keyboard on my computer portable pavilion g6

  Product number is A1J18AV

  There is something behind my "D" key on my keyboard and it is difficult to press. Can I remove the key? and if I can, how?

  Hey armyman1016,

  Unfortunately, you can't take off individual keys. You can take the entire keyboard that will not give you the ability to watch under a certain touch, however.

  Now, if a small vacuum cleaner with a brush is available, use it to clear the keyboard of the debris. A can of compressed air can be used to blow the particles that get between the keys.

  Hope that answers your question.

  THX

• How to remove one of the editions of Windows that I currently have on my laptop?

  Original title: I have 2 OS on my laptop (home that came w / it. and professional because of the needs of the job I did the professional more so how can I remove the professional and keep the House?)

  I have a laptop HP Pavillion that came w / XP Media Center Edition OS on it. Then a little while the latter I had a job that I could telework and the company I went to work for the slot of the drive to add professional XP. So now I have the Media Center Edition and Professional Edition, and as you can guess the computer is very slow. Well I have that more employment and want to return to only 1 Media Center Edition OS. How can I remove the professional edition?

  Get a partition manager and use it to format the local disk drive holding the BONE you want to delete. After you're done merging now empty partition with the local disk that contains the OS Win XP Media Center.

  Caution when you do.

  It may be useful

• How can I remove one of the installation to start two windows7 in the boot partition?

  I tried to upgrade my pc windows7 premium to ultimate through the program on my PC. It has not worked and I installed windows7 ultimate with cd I bought,

  now, I have windows7 in my startup program 2. How can I remove my boot sector 1?

  Click Start, type: msconfig

  Press enter on your keyboard

  Go to the Startup tab

  Select the entry you want to delete

  Click on delete

  Then set the time to '0'

  Then click on apply and OK

  Restart if prompted.

  ------------------------------------------

  If the problem persists, try the following

  Click Start, right click on computer

  Click on properties

  Under control panel home

  Click on "advanced system settings".

  Go to the Advanced tab

  Under Startup and recovery, click settings

  In the default operating system list, select Windows 7

  Uncheck the "time to display list of operating systems".

  Click OK

  Then apply and OK

  ---------------

  If it still does not respond, try the following:

  EasyBCD by NeoSmart Technologies would be your answer, it provides a graphical front-end to the BCDEdit Command line that makes it easy for you to set the boot settings and change the entries start on the new Windows Boot Manager.

  http://NeoSmart.NET/DL.php?id=1

• How to remove one of the two temporary files

  Hello
  I changed only inadvertently the temp tablespace in a database - evil
  
  ALTER TABLESPACE TEMP add TEMPFILE 'temp_wrong_file.dbf '.
  SIZE 100M REUSE AUTOEXTEND ON NEXT 10M 1000M MAXSIZE;
  
  I need to drop all this bad temp file and not the original and correct a temporary file for the database.
  
  Is this OK: -.
  
  change the drop of tempfile 'temp_wrong_file.dbf' database including data files;
  
  
  This fall just the wrong temp file?
  
  Thank you

  Fran,
  
  Nice demo - I didn't realise that was possible. What happens if someone has used some TEMP space inside that datafile?
  
  John
  

  I have omitted this problem because I think he has created just the temporary file, so the temporary file was not in use.

  In this case, if the wrong tempfile is in use, you will get the following error:

  ORA-01258: unable to delete temporary file C:\USERS\FRANCISCO\MIBBDD\ORADATA\FRAN\TEMP01.DBF
  ORA-27056: skgfrdel: could not delete file
  OSD-04024: Unable to delete file.
  O/S-Error: The process cannot access the file because it is being used by another process.
  

• T7610 SAS (LSI 2308) precision controller - set the SATA drives?

  Hello

  The controller is SAS RAID LSI 2308 integrated in the T7610 of precision allows to attach SATA hard drives in a non-raid configuration?  I just realized this system has only TWO internal SATA connectors, but I need THREE internal SATA drives.

  What I was asking is if the SAS ports will allow the connection of SATA drives that are not used in RAID mode?  This way I can add my 3rd SATA HDD to a SAS ports.

  Thank you
  M

  We are experiencing the same problem/issue with the T7610 of accuracy by using the controller LSI-2308.  The end result that we would like is to have 2 drives separated - do not use the raid controller.  However, the CD Rom takes up one of the sata drive connections.

  Anyone been able to disable the raid and then controller, seeing the disks during the installation of windows needs to see?

  Currently, I have 2 blank drives (3 TB (ea.) and windows setup does not see the discs - but the raid controller load very well through the configuration.

  What should I do to get readers in windows?  There the meta that needs to be removed?

• Want desolde/resolder, remove and replace the two damaged usb2 ports

  I have a Sat A30 perfect by all means other than 2 USB2 ports on the back that are damaged (black plastic seperaters between connectors jumped) not quite sure why this happened because I was simply unplug the connected usb plugs on both occasions.

  The connectors were not especially tight. fault is I have no insulation between copper connectors which are still found in the slots and causes a short circuit, when I plug in a usb device.

  I bought a card mother relpacement (damaged) and usb2 connections are OK! Have good technician experience in carring out Soldering/desoldering and has all the tools. Problem is that I have not the slightest idea what connections under the Board of Directors are required to unsolder my damaged usb2 card in order to remove/swop and perform the necessary replacement.

  I'm sure I'll be advised to contact an authorized reseller of Tosh. I tried this and they say that they will be already only the motherboard together and the cost is horrible. I would rather make the repair myself that's not rocket science.

  The techies out there who could counsel with picture of the relevent pins to desoldering in order to remove and repair the fault would be greatly appreciated.

  E-mail: [email protected]

  If you can help in any way or point me in the right direction to go repair.

  I hope someone can help. Thank you very much
  Stewart

  Hello

  Please don't be crazy about me, but in my opinion, is not a very good idea to open the notebook alone if you don't have a lot of experience with it. Laptops are designed on the specific way and exchange of material is not so easy as the exchange of material to work stations.

  Believe me that a small error in the assembly/disassembly procedure can case damage to equipment or the façade of the same laptop parts. I know that there's not much service partner assistance because they want to do. It costs money, but you must understand that if they give that kind of advice or information they may close the shop very soon.

  You can try to do it alone, but at your own risk and be careful.

• HP Pavilion a6667c: HP Pavilion a6667c, install the HARD drive to the SATA port

  My question is: is it OK to install a hard drive extra (in this case, my old laptop drive) in one of spare SATA ports on the motherboard? My first two is taken over by my first hard disk and the optical stock.

  You can add the disk as a data disk. This tray will work. Data cable  

  The power supply should have additional Sata power lead.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• Cannot add any material and my computer does not recognize one of the ports

  my computer won't recognize any port or plug and play devices. map of my camera not recognized when I insert in the port.my computer does not recognize one of the ports and if I try to download a driver for the printer, it starts and stops before installation. The computer had crashed and went blank. So I had to get a new hp boot disc and install it. Since then, it has happedned

  Hi gramward1,

  We recommend all first download and install the drivers for the chipset on the computer and check the difference.
  To download the driver, visit the website of the manufacturer of the system.

  Step 1: You can also try to search for the hardware changes and check if the device is detected on the computer. To do this, try the following steps:
  a. connect any USB device to the computer.
  b. Click Start, click Run, type devmgmt.msc, and then click ok.
  c. in the list of items, click one of the items, click the Action menu and click scan for hardware changes.
  d. check if the device is detected.

  Step 2: Try to remove and reinstall all USB controllers
  a. Click Start, click Run, type devmgmt.msc in the Open box and then click OK.
  b. in the list of components, expand Bus USB controllers.
  c. right-click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  d. restart the computer once you have removed all the USB controllers.
  Note: USB controllers automatically install after you restart the computer.
  e. plug the removable USB storage device and perform a test to ensure that the problem is solved.

  If the problem persists, run Microsoft he difficulty of this article: http://support.microsoft.com/kb/925196

  Visit our Microsoft answers feedback Forum and let us know what you think.