SATA ports on MS-7613 motherboard (HP G5370uk desktop PC)

Similar Questions

• SSD Raid 1 on the PowerEdge 100 motherboard Sata ports

  Hello

  I have a PowerEdge T100 with a Raid 1 SAS. I want to upgrade the server with 2 SSD connected to the Sata ports directly on the motherboard. They would Raid 1.

  Do you know if this is possible with the T100 PE?

  Hello

  I can't say with certainty. It is theoretically possible, but here are some things to consider:

  1. I show that we validated a SSD for the T100
  2. I do not show that the T100 is supported by the AHCI. Better SSDS feature with AHCI
  3. Although the ICH9R chipset is capable of RAID I do not show that it is a feature of the version installed in the T100 system map. You will need to run the RAID software within the operating system if you want a RAID array.

  Another thing to note is that the SATA ports are locked when a RAID SAS controller is present. Some of the ports are unavailable if this controller is present in the system.

  Thank you

• Can cling to the blue SATA port on the Mobo for optical drive SATA HDD

  Studio XPS 435 t/9000 Office

  Service Tag:

  This box has the following motherboard in it.

  X501H Dell Studio XPS 9000 435 t LGA1366 Intel X 58 + ICH10R DDR3 motherboard series

  There are (5) SATA ports on the internal motherboard.

  
  SATA1, SATA2 - blue color Code, I (1) optical internal drive attached to the SATA1

  SATA3, SATA4, SATA5 - black color code, I (3) HARD drive connected 3,4,5

  The blue color SATA2 port is open

  Can I connect a 4th HDD SATA blue SATA2 port?

  Or are the blue SATA ports only for optical drives

  It will cause some problems if I hang a 4th HARD drive SATA2 port blue

  Hi rgadawg,.

  Welcome to the community.

  Blue SATA2 port must be compatible to connect to another hard drive. He should not ask any questions however, Studio XPS Installation Guide Page 57 under specifications says he has three bays for hard drives SATA 3.5 inch disk.

  http://Dell.to/YbYwib

  Thank you & best regards
  Mustapha S
  #iworkfordell

• Format HP G1 280 Microtour: HP 280 G1 SATA Ports

  Can someone tell me how many ports SATA is on the motherboard in HP G1 280 Microtour format?

  I already know that the PC has 1 external 5.25 "Bay and 2-Bay internal 3.5" x.

  @t0m

  According to the documentation I looked there are only three 3 SATA ports.  See the image below.

  

• Memphis-s SATA ports

  I have a Pavilion of 500 - 205t with Memphis-s motherboard.  It has 4 SATA ports with different colors.  What do the different colours mean?  Is there a documentation available for the PC that describes this?

  Thank you.

  Hello again,
  
  Yes, the paper suggests so.
  But if you have just one hard drive that it doesn't matter at all.
  
  However, if you have several hard drives connected, you must use port 0 for training with the operating system installed on.

• HP Pavilion a6667c: HP Pavilion a6667c, install the HARD drive to the SATA port

  My question is: is it OK to install a hard drive extra (in this case, my old laptop drive) in one of spare SATA ports on the motherboard? My first two is taken over by my first hard disk and the optical stock.

  You can add the disk as a data disk. This tray will work. Data cable  

  The power supply should have additional Sata power lead.

• Can I use the SATA port connected to an optical drive to plug in a hard drive?

  I have a Pavilion e9270t desktop, Win7 Pro SP1, and I want to connect 3 HARD drive to the motherboard. Can I do this? Can I use the SATA port connected to an optical drive to plug in a hard drive?

  Thanks, CHemming

  CHemming,

  I've not seen UEIF support in the existing BIOS.

  If your demand on a 3T led, re - consider a maximum of 2 T.

  If you ask to have 3 hard disks, then you can do it without harassing the present cable of CD.

  The cage of your system hard disk will support 3 hard disks. Manual upgrade service

  All you need are the SATA data and power cables. Your Board has 4 SATA data ports.

  When you report back after inspecting your system for SATA power cables, I will move the cables and adapters, if necessary.

• m.2 port removes one of the sata ports?

  the Aspire xc - 710 has two standard SATA ports and one port m.2.

  Using the port of m2 for storage of solid state stops ONE of the work's native sata ports?

  i.e. There are THREE ports on the motherboard for three devices... or it's TWO ports that can be shared between THREE devices?

  Thank you

  Hello

  No, you have 3 ports available and 'independent': 2 SATAs x and 1 x 2280 m2. You can connected 3 devices.

• PowerEdge 2900 on board sata ports

  I have a PowerEdge 2900 server and would like to put in a single spare 2 TB SATA for additional storage (non-critical).  The motherboard has two onboard SATA, A & B ports.  When I try to connect the drive onboard SATA ports, the BIOS does not detect anything, and when I change the type 'Auto', save the settings and restart settings are not stored in the BIOS.

  I don't know if the SATA motherboard ports supports hard drives, or if there is other reason things do not work.  I tried different cables and tried the drive in another computer, and everything works fine in another computer.  Plan to put in some additional SAS drives in the drive box, I'm looking for an intermediate solution.

  Any help is appreciated.

  Thank you
  Josh

  I've seen this same problem and fixed it. He must go to "Shipped" in the bios and enable "Onboard Sata".

• Which of my sata ports should I use?

  I have this hard drive [http://www.amazon.com/gp/product/B00471G8CC/], but I want to make sure that I use the best sata port. My office is the CQ5720F, here is the link to the plug to motherboard [http://support.hp.com/us-en/document/c02552467]

  He says I have sata 1 and 2 under 'internal connectors' but I have 4 sata ports. That's the problem, I don't know which one to use. Currently, I have it plugged into one marked "Sata 3. What should I do?

  Thank you, Travis

  The specs are incorrect. All 4 SATA ports are the same and are SATA2.0 ports. I doesn't really matter which port you are using, but I put the main hard drive on #1, secondary hard drives on #2 and #3 and the CD/DVD on #4.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• XPS 8300 SATA Port multiply

  This motherboard supports a SATA Port multiplier? I would like to add an external box with more than 1 SATA drive.  If this is not the case, what is recommended?

  Thank you

  Its sata not sas No.  Motherboard: DX58SO2 Chipset X 58 Express/Intel ICH10

  System requirements:

  Your motherboard must PM port multiplier support.  The 8300 is not working.

  The ICH10R does not support port multipliers, you need a card with a Silicon Imaging SIL3124 or controller 3132 or some JMicron controllers.

• SATA ports enable Compaq Bios Rev 3.15 Presario1230NX

  This model motherboard has two SATA ports. I am looking for options to enable them. According to the HP download site, I use the latest version of the BIOS. The ports there just for decoration, or are they useful?

  SeattleSam.

  Many sleepless nights is early and extensive reading. You can not have both Sata and IDE controllers active.

  (1) ATTENTION: This Board only supports the Sata150. You must provide a rider and the value of the player Sata150.

  This means that you must purchase a Sata150 and Sata300 drive (with a rider).

  (2) you must use the IDE emulation

  (3) start here:http://forums.techguy.org/all-other-software/483231-sata-drivers.html

  (4) then: http://www.computerhope.com/forum/index.php?topic=94838.15

  How and why you must create XP drivers:

  http://www.ehow.com/how_4829466_install-SATA-hard-drive-XP.html

  http://News.Softpedia.com/news/install-Windows-XP-on-SATA-without-a-floppy-F6-47807.shtml

  http://www.custompcblog.com/troubleshooting/installing-Windows-XP-SATA-hard-drive

  Happy now?

• Z200, multiple SATA ports can be designated for eSata?

  I have an eSata card 2 model (which feeds my Z200 via SATA motherboard). 5 SATA port is configured to use eSata in the BIOS and works as it should. I tried the second port of routing ports SATA 3 and 4, however any eSata device that will not recognize without a reboot. It seems I can only specify a port to be a port "eSata". I use Windows 7, 64-bit as OS.

  Is my question, possible to use multiple SATA ports as a port eSata on the Z200? It works fine on the Z800 I (I don't have yet to specify what are the SATA eSata ports, will work all available ones I use).

  Thanks in advance for any help,

  Hello

  Try HOTSWAP.  It works fine as it forces a rescan of material.  You another alternative is to use the function analysis of new hardware in Device Manager.

• Add additional SATA ports

  I have three hard drives in my XPS 9100 (start + two storage drives). I've been threatening to install an SSD , which would replace current among the hard disks. I have also two optical drives. Who uses all five SATA ports.

  Ideally I would like to leave the HARD drive that is currently installed and reformat the drive for additional storage, but the issue of SATA ports and supply connections arise.

  I could do this by installing a PCI-Express card like this:

  StarTech.com 2 Port PCI Express controller card PEXSATA22I internal SATA II

  and using a divider of power like so?

  StarTech.com 6 SATA Power Y Splitter cable adapter - M/F in PYO2SATA

  Note: I would connect the SSD to a SATA port on the motherboard (not map).

  DG

  Dg27,

  They attract very little energy, so it shouldn't matter.

• XPS8500 mSATA iii, HARD drive disk SATA port?

  I have a XPS8500 Office with 2 SATA iii HARD drive currently as the only player to. I bought a 1 to Samsun Evo 850 to replace the HARD drive (the HARD drive has only about 600 GB used, so it should migrate completely without problem). Ports SATA 4 deep 1 SATA ii and SATA 0 and mSATA ports are the only SATA iii ports, I would move the existing 2 TB HDD in a location empty in the cage with the SSD drive in the location of the SATA 0 port. Ideally I would drive the HARD drive using the port mSATA to keep capacity SATA iii. Is there an adapter that will allow you to it? In other words: an adapter to change the architecture of the port mSATA connector to allow a normal SATA cable connect the port for a SATA drive.

  There are adapters to convert a port mSATA on the motherboard in a standard SATA 3 port to a HARD drive. If you google around you can find them, for example this one.

  Remember that I do not specifically recommend (or not) this map or this provider. So shop around to find what fits your needs and your budget.

  Also, I have no idea how that these adapters are working (or not).