Satellie A100: How to use MMC card in the card reader

Similar Questions

• Satellite M60: Problem with SD/MMC card reader

  I have a Satellite M60 Series. Has been pre-installed with Windows XP Home. I have upgraded to Windows XP Pro, SP 1.
  Installed all the drivers, but got an error when you try to install the Intel Chipset drivers, allways ask it lacks USB driver usbehc.sys. Another problem is that I can not read the SD/MMC card reader. In fact I reinstalled the Cardbus driver, but still I am not able to read any card about it.
  I appreciate really all advice on this subject.
  Kind regards.

  Hello

  Satellite M60 is newer units and I have no experience with it, but if you please check the download area of Toshiba and you will find instructions to facilities. You will see that cart drive is with cardbus driver.

  I don't know if it's important, but all drivers are designed for SP2 and if you use SP1, it is possible that there is a problem because of this.

  Good luck and please let me know if the installation could be successfully

• I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

  Hello

  I am looking for ENE PCI Secure Digital / MMC Card Reader Controller for Windows 7 64-bit.

  Any ideas, please?

  Hello

  I did a system image (drive C :) and a rescue of dvd of Windows 7) Cool, it uses a Volume Snapshot.

  Then, I installed the Vista 64 bit drivers successfully.

  The drivers are:
  -ENE PCI Memory Stick Card Reader Controller

  -Card Secure Digital ENE PCI / MMC Card Reader Controller

  -AuthenTec Inc. AES2501A (fingerprint)

  -Trust Webcam 15007

  Unfortunaly, the imprint does not work. I thnik my fingerprint is not compatible with the new Windows Biometric Framework (http://windowsteamblog.com/blogs/windows7/archive/2009/01/08/windows-7-puts-it-s-finger-on-enhanced-biometric-support.aspx)

  Thank you all, bye.

• ENE PCI Secure Digital / MMC Card Reader Controller does not

  ENE PCI Secure Digital / MMC Card Reader Controller does not

  I suggest that you go the manufacturer of your computers website and search for drivers chipset update.

  Click Start, type: Device Manager

  Press enter on your keyboard

  Click with the right button on the controller listed in the tree view of the devices

  Click on uninstall

  Restart your computer and let Windows redetect.

• I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away.

  I got a license number for Adobe Master Collection from my school (Stevens Institute of Technology) and I can't understand how to use it to obtain the product. I created a user name and this is as far as I'm away. I need to download the product and I may not know where to start.

  Ask someone to your school... You have a Cloud redemption code, or a number of series CS6?

  If cloud, http://helpx.adobe.com/x-productkb/global/redemption-code-help.html Redemption Code and

  http://www.Adobe.com/products/creativecloud/FAQ.html

  http://helpx.adobe.com/creative-cloud/help/install-apps.html to install or uninstall

  http://forums.Adobe.com/community/download_install_setup/creative_cloud_faq

  What is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  To start https://helpx.adobe.com/creative-cloud.html the Cloud

  If CS6, download to other downloads and enter your serial number when prompted

  Once again, your 1 resource is your school

• How to use JavaScript to change the named view

  How to use JavaScript to change the named view

  Do you mean to jump to a specific Destination named within a PDF file? SE so there

  the method gotoNamedDest of the Document object.

• How to use CSS to create the horizontal navigation bar in Dreamweaver CS6

  How to use CSS to create the horizontal navigation bar in Dreamweaver CS6

  One of the ways to do this is the following: Editor Tryit v1.9

  You can also use floats to get something in the same direction.

• How to use JavaScript to limit the number of boxes to check the user can select a PDF form?

  How to use JavaScript to limit the number of boxes to check the user can select a PDF form?

  Here's the working solution

  Please rename all the boxes like chkBox0, chkBox1... .chkBox30 (must start with 0)

  Value of exports of each checkbox must be "Yes" (default value is Yes)

  Place this Code at the level of the Javascript Document

  -Code JavaScript document-

  var counter = 0;                Checked the meter

  -Count boxes checked again when the document is closed and reopened.

  for (var i = 0; i)<= 30;="">

  If (getField("chkBox"_+_i).value == 'Yes') {}

  Counter += 1;

  }

  }

  -The function of validation-

  function validateCheckBox(name,value) {}

  If (value == 'Yes' & meter)<>

  Counter += 1;

  } else if (value == 'Off') {}

  counter = 1;

  } else {}

  getField ("name") .value = "Off";

  App.Alert ("you can select only four checkboxes");

  }

  }

  -End of Document Javascript-

  Now put this line in the MouseUp event all checkboxes

  Box - Code MouseUp event.

  validateCheckBox (event.target.name, event.target.value);

  //----------------------------------------------------------------------------------

  Hope this will help

  Kind regards

  Post edited by: Mohammad Irfan

• Satellite A100: How to use the IrDA port with cell phone?

  I have a laptop with an infrared port that I can use with another computer.
  Now, I have a problem with my laptop at home, A100 series.
  I downloaded Nokia PCsuite software from the Nokia site, but it can not connect to my phone.
  If I put the phone to transmit IR, always the pc does not regognice the phone anyway even if the phone is located near the infrared port of the PC.

  I updated my bios, tried to take the infrared port, used as a port standard com etc. Nothing works.
  What should I do to get the infrared port of the function and write down automatically if I bring about my mobile with IR?

  Thank you
  Petri

  Don't be angry with me because I ask, but are you sure that your laptop supports the IrDA?
  What cell phone do you have exactly? Satellite A100-xxx

  IrDA option appears in the control panel?

• Pomp A100-773 and WIN 7: card reader and access keys Fn does not

  Hello
  I hope that this question did not arise 100 times before. (I have not found an answer in this forum)

  Problem:
  Card reader and FN keys do not work, where can I get drivers?

  I installed Win 7 Pro on my laptop Satellite A100-773. Everything works great and Win 7 has all the drivers installed, but the card reader and FN keys do not work.
  On the support home page is not oder pilot anything for this laptop with Win 7.

  Can someone help me with this?

  Tahnks.

  PS: it was not the version upgrade of the United Nations.

  Hi all,

  by now, I tried the extra package toshiba for model serveral for win 7 and vista, but before the installation there is an error.
  the card reader is now working with the card reader for win vista driver.

  Doesn't anyone know how to solve this problem?

• SD card does not work in on my Satellite A100-163 5-in-1 card reader

  Hello

  I recently bought a 1 GB SD card and tried to plug it into my A100-163 built-in 5-in-1 card reader. Nothing appears in my computer. I tried to go to the Device Manager and, under "drives" "Secure Digital Storage Device" with a bit of yellow! Select this option. I tried updating the driver Module SD, but whenever I do that the installer comes up with an error, basically saying he can find SD Secure Module.msi. He tries to find in a dark temp folder that involves me Installer is not extracted properly.

  Can someone help me read my SD card? Help, please!

  UPDATE: on the occasion of the strange, it appears in my computer as "Secure Digital Storage Device. When I double click on it, it says:

  "E:\ is not accessible. The request cannot be performed because of an i/o device error."

  Thank you.

  Mike.

  Post edited by: toto8462

  Hello Mike

  One thing confuses me. If the unit has the multi card reader factory settings must be configured correctly. You use your own installation of the OS?

  In any case, try to remove device from digital storage secure from Device Manager, then restart the device.

• Satellite L550-117 - how to use VGA + HDMI at the same time?

  Hello
  I have a Satellite/Satellite L550 series Satellite L550 - 117.
  Can I use 2 monitors at the same time, using the function key (laptop screen + HDMI, VGA + HDMI, VGA, portable computer), but I would use "laptop screen", "VGA output" + "Output HDMI" at the same time (for example: to play a movie on an HD TV and work on the other two screens).
  I also want to play sounds on computer speakers 'and' an HDMI output, not the speakers for computer 'or' HDMI.

  Is it possible with this notebook and how?

  Thank you

  Hey Buddy,

  Good idea you have unfortunately it of not possible to use 3 monitors at the same time. You can use the internal monitor and an external monitor but not the two external monitors. This is not supported in the graphics card.

  Then, you use internal monitor, VGA connection or internal monitor + HDMI connection. That s what you can do.

• How to install Cardbusdriver-Card reader on Satellite M40x?

  Hi all
  I have laptop Satellite M40X-112.
  I downloaded the cardbusdriver reader of card on the Toshiba site.
  So my question is how to install it, I mean what file I have to click to start the installation.

  Thanks in advance.
  BVP

  Have you ever tried with setup.exe?

• How to use Labview for measuring the reflectance at different wavelengths automatically

  Hello!

  I'm using labview to communicate with MS257 (a monochromator). If I do not use Labview, I have to use the hand controller (set a wavelength from 300 to 1100 under a grating (a total of four grids).) It takes a lot of time. So I want to use labview to realize the automation. But I don't know how to do, I still can put only a wavelength as a command for MS257, not making any difference.

  Does anyone know how to deal with this?

  Thank you for your time.

  So where are you stuck? It is a fairly common task. Inside of a loop, you can increment the "xxx" and build a table of responses. Look at the Format function in the chain and a knot of shift register/feedback.

• How to use NIDAQmx to determine the number of lines correlated DIO?

  How can I used NIDAQmx to determine the number of correlated DIO lines that supports a device?  For example, the NI6225 supports 8 correlated digital of/s lines while the NI6229 supports 16 correlated digital of/s lines.  How can I used NIDAQmx to determine the NI6225 supports only 8 lines while the NI6229 supports 16 lines?

  I moved this question from a previous thread.

  Thank you

  Ian

  Here is a code snippet that implements the regular expression detection: