Satellite 1130-Z24 turn problems

Similar Questions

• Satellite 1130-z24: upgrade hard drive question

  Hello

  I have a toshiba Satellite 1130 - z24, which requires a new hard drive, the old man is a MK2108GAP of 20 GB but I want to set up a larger capacity drive. What is the record of the maximum size that I can use without any problems of compatibility?

  One of the following players would work?

  MK6034GAX 60 GB
  MK8026GAX 80 GB
  100 GB MK1032GAX

  I searched on various forums and websites, but the only information I can find is that the BIOS will not support the discs above a certain size, but I don't know how it is.

  Any help much appreciated.

  Hello

  I think that good old classic supports IDE controller.

  The IDE controller manages max 128 GB HDD due to support of the 28-bit LBA.

  So in your case, I would recommend choosing a HARD disk that is not longer than 120GB
  so, theoretically the 100 GB MK1032GAX should be compatible

• Disassemble a Satellite 1130-z24

  How do I disassemble the TOSHIBA SATELLITE 1130-z24?

  There a lot of dirt (Brown cotton wool as stuff) inside which vacuum cannot get rid of (as its off), but I want to disassemble clean the fluff, re - assemble and use the laptop.

  I took out all the screws (I could see) under the laptop it but still no joy, the case will come out.
  Charge down the user manual, but who does not tell you how to proceed.

  Is there a technitions manual I can down load so he can tell me how to take apart safely.

  Hello

  Disassembly manuals can be downloaded from the Toshiba page.
  I didn t think not and I guess this manual are created just for a Toshiba authorized service partners and are not released for public use.

  You may find some photo or details from the internet. Google is your friend always ;)

  But generally speaking, it s really complicated to disassemble the laptop and I would not recommend doing this if you n t know how proceed.

  Of my knowledge on most laptops the keyboard must be removed first because there could be a few screws that immobilize the other parties and covers.

  Sorry, but I cannot provide more details, because the Satellite 1130-z24 is unknown to me

• Hard drive for TOSHIBA SATELLITE 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 portable

  But he has only a 10 GB hard drive.

  The BIOS sees a 40 GB, 60 GB, 80 GB or 160 GB HDD?

  Is the IDE?

  Hello

  I doubt you could use bigger hard disks of 128 GB because of the 48-bit LBA.
  The laptop seems to bear an IDE controller but the 48-bit LBA is supported since 2001, defines the ATA-6 Ultra DMA/100 (also called Ultra DMA mode 5 or Ultra-ATA100)

  I think that your IDE controller support 28 bit and that is why you should choose less IDE 2.5 hard drives.

  See you soon

• Card wireless network for Satellite 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 portable

  What wifi card can I use with it.

  Hello

  As far as I know the laptop supports a Wlan miniPCI slot.
  So in this case, you should be able to use miniPCI WLan card that supports the 802. 11b standard Wlan.

  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible!

  See you soon

• Block of power SUPPLY or AC adapter for Satellite 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 laptop.

  He came without a power SUPPLY or charger power.

  Apart from Toshiba own PSU, can I use a universal laptop charger which is compatible with other Toshiba laptops?

  SATELLITE 1130-z24 will cap size similar to that used on other Toshiba laptops.

  Hello

  As far as I know the universal AC adapter part number: PA3165E - 100-240V AC, 50-60 Hz, 75W with DC 19V output would be compatible.

  Just Google for certain online offerings.

  See you soon

• Satellite 1130 Z24 BIOS update problem.

  I have download the proper file, but saves it as tw30170w.rom. How do I run it? Windows does not recognize it.

  Brian

  Hello
  I would try it with the traditional Biosupdate.

  Download bios here-> http://eu.computers.toshiba-europe.com

  Watch "Support & downloads", click on "Download Bios" a choose your model

  How to upgrade the BIOS

  Satellite 1130

  1.) extracted the zip file containing the BIOS upgrade to a temporary folder.
  2.) insert a 1.44 MB diskette formatted in the floppy drive.
  3.) Execute the file *.exe extracted to the temporary folder. Follow the instructions on the screen. A BIOS update diskette will be generated.
  4.), make sure that the laptop is plugged into the sector.
  5.) turn off the laptop.
  6.) place the floppy disk containing the BIOS upgrade in the floppy drive.
  7.) turn on the laptop with the F12 key.
  8.) the BIOS boot menu appears. Select 'Removable Device', 'USB Floppy Drive' or the diskette symbol using arrow keys. Press "enter".
  9.) the Notebook will start from the BIOS upgrade diskette.
  10.) the BIOS update will start automatically.
  11.) after a few minutes the laptop turns off automatically, remove the disk and do a restart. If it does not then remove the disk and turn off the system and return to restart the laptop.

• Satellite 1130 battery charge problem

  Hi, just joined this site. I have a Satellite 1130 and seem to have a battery charging problem. Every so often, without regular pattern or a set of events to help the machine starts beeping and the Red charge blinks, as if the battery charge runs out, it is, but it happens when the charger is plugged - green power light shows that it is connected, but it is not the battery. The only solution I found is to turn the power off, disconnect the battery and back again. Then everything works until the next time.

  Any ideas?

  [Edited by: admin April 23 05 18:07]

  Hello

  It is possible that there is a problem of electronic power supply. If the power supply microcontroller detects an error lamp DC IN sends a code flashing (8-bit error code). Can you please check it if the led blinks 8 times sending the code?

  You can try to contact the Service partner, explain the problem and I'm sure they can give you a clear explanation.

• Satellite 1130-Z24, system stopped working altogether

  Hello

  My system stopped working altogether, since it was abandoned, from short distance however. When it is connected to an electrical outlet, the light work, so I suspect power are trying it, and I think I've damaged the motherboard or the power, but I hope that something simple. Someone at - it all manual showing how to disassemble the satellite 1130, or any other suggestions.

  Kind Rgrds

  Chris

  Hello Chris

  There is unfortunately no official document how dismount/mount your Satellite. In my opinion the best solution is to contact the Service of your country partner.

  I'm sure they can help you. Who knows what part of the equipment is damaged.

  Good luck!

• Re: Satellite 1130-z24 - looking for the part number or a screen

  Hello world

  Never done this before, are looking for the part number or a screen for the z24 1130 above

  help please.

  Hi michael,.

  In my opinion, you should contact an authorized service provider. Why? Guys can you tell the exact part number and order a new replacement screen for you. On the Toshiba site, you can search for them.

  Alternative look on eBay. Here you can often get second hand spare parts. The screen is an expensive item so maybe you have a little luck on eBay.

• Satellite 1130-z24: No. DVD/CD icon in my computer

  I hope someone can help.
  I've had my laptop for a while... now, but for some time the laptop continues to lose dvd/CD-RW icon in 'my computer '.

  any ideas?

  Have studied a little bit on the Microsoft site and found this article in the knowledge base that could help solve the problem.

  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Please give us a feedback if it will help or not.

• Satellite 1130-z24: is Seagate momentus 4200.2 80GB HDD compatible?

  Hi all.

  I'm moving the 20 GB HARD drive to a 80 GB one, but the new drive is not recognized in the Bios.

  The drive model is st9808210a.

  First of all, I took an image of the disk using Norton ghost. Then, wrote nine hard disk image by ensuring that it has been set to be bootable. And the drive is not recognized.

  Am I missing something? Is there a limit of capacity on the bios? (bios is newer)

  Thank you.

  Simon.

  Hello

  It seems that the BIOS cannot recognize the disk properly due to the size of the HARD drive.
  The laptop comes with a 20 GB HARD drive and I guess that the hard disks of 80 GB are not supported. Unfortunately, I put t found detailed information on the size of HDD supported, but in my opinion, you should be able to use a 40 GB. Perhaps also of 60 GB HARD drive.

• Satellite 1130-Z24, how to get the service manual

  Does anyone know how I can get instructions on disassembly of the laptop, or a repair. I suspect that my motherboard is damaged, because he gave recently and now does not power upward, although when it is connected to AC power, the light on the front of the NIP, indicating the power happened to her. I wonder if it could be the power button is damaged?

  Hi Chris

  In my opinion it of not so easy to disband the unit because there is very little electronic parts on the map and you need to be an expert to find the failure.
  In this case, you should ask the service partner for a more detailed description.
  However, I found only a manual for this machine. You can find it on the Toshiba site.

  Good bye

• For my Satellite 1130 motherboard drivers

  Hello

  My satellite 1130-Z24 died, with a main board failure. I replaced the Board with one, I got from E - Bay, which is not the same exact model, but I don't know which. The keyboard works except the arrows and the touchpad do not work, even if its detected in the Device Manager and XP installed OK, with Service Pack 2. Everything works well, the system uses the Windows generic drivers for display, but it works OK. I can find the model and the SN of the motherboard with BIOS agent, can someone help me find the model of the system, so I can download the correct drivers?

  Rgrds

  Hello

  Well, I don't know if someone in this forum can help to solve this problem, because the information detailed or other serial numbers on motherboards doesn t m.
  I recommend you contact the ASP.

  Best regards

• Satellite 1130-Z31: impossible to get 1600 x 900 on the second monitor

  I have a Toshiba Satellite 1130-Z31 (an old, but everything works well).

  Now, I have attached a second monitor with a native resolution of 1600 x 900 pixels.

  I put the second screen resolution to 1600 x 900, it is accepted.

  However, the image on the second monitor is ugly, and the external monitor´s what OSD says it gets 1440 x 900 pixel laptop computer signals.

  It seems that Toshiba sends an image with a lower resolution on the whole.

  I installed the latest graphic driver - no change.

  Or would it be a problem with a bad quality VGA cable or almost?

  Any ideas?

  Thank you
  Turtle

  Hello

  Unfortunately, I wasn't able to find the info which resolutions are supported for external screens, but if you can't get 1600 x 900 pixels which means that this resolution is not supported by the graphics card.

  What video port are you using? VGA 15 pins port maybe?