Satellite 1130-Z24, system stopped working altogether

Similar Questions

• Satellite 1130-z24: upgrade hard drive question

  Hello

  I have a toshiba Satellite 1130 - z24, which requires a new hard drive, the old man is a MK2108GAP of 20 GB but I want to set up a larger capacity drive. What is the record of the maximum size that I can use without any problems of compatibility?

  One of the following players would work?

  MK6034GAX 60 GB
  MK8026GAX 80 GB
  100 GB MK1032GAX

  I searched on various forums and websites, but the only information I can find is that the BIOS will not support the discs above a certain size, but I don't know how it is.

  Any help much appreciated.

  Hello

  I think that good old classic supports IDE controller.

  The IDE controller manages max 128 GB HDD due to support of the 28-bit LBA.

  So in your case, I would recommend choosing a HARD disk that is not longer than 120GB
  so, theoretically the 100 GB MK1032GAX should be compatible

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• Disassemble a Satellite 1130-z24

  How do I disassemble the TOSHIBA SATELLITE 1130-z24?

  There a lot of dirt (Brown cotton wool as stuff) inside which vacuum cannot get rid of (as its off), but I want to disassemble clean the fluff, re - assemble and use the laptop.

  I took out all the screws (I could see) under the laptop it but still no joy, the case will come out.
  Charge down the user manual, but who does not tell you how to proceed.

  Is there a technitions manual I can down load so he can tell me how to take apart safely.

  Hello

  Disassembly manuals can be downloaded from the Toshiba page.
  I didn t think not and I guess this manual are created just for a Toshiba authorized service partners and are not released for public use.

  You may find some photo or details from the internet. Google is your friend always ;)

  But generally speaking, it s really complicated to disassemble the laptop and I would not recommend doing this if you n t know how proceed.

  Of my knowledge on most laptops the keyboard must be removed first because there could be a few screws that immobilize the other parties and covers.

  Sorry, but I cannot provide more details, because the Satellite 1130-z24 is unknown to me

• Hard drive for TOSHIBA SATELLITE 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 portable

  But he has only a 10 GB hard drive.

  The BIOS sees a 40 GB, 60 GB, 80 GB or 160 GB HDD?

  Is the IDE?

  Hello

  I doubt you could use bigger hard disks of 128 GB because of the 48-bit LBA.
  The laptop seems to bear an IDE controller but the 48-bit LBA is supported since 2001, defines the ATA-6 Ultra DMA/100 (also called Ultra DMA mode 5 or Ultra-ATA100)

  I think that your IDE controller support 28 bit and that is why you should choose less IDE 2.5 hard drives.

  See you soon

• Card wireless network for Satellite 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 portable

  What wifi card can I use with it.

  Hello

  As far as I know the laptop supports a Wlan miniPCI slot.
  So in this case, you should be able to use miniPCI WLan card that supports the 802. 11b standard Wlan.

  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible!

  See you soon

• Block of power SUPPLY or AC adapter for Satellite 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 laptop.

  He came without a power SUPPLY or charger power.

  Apart from Toshiba own PSU, can I use a universal laptop charger which is compatible with other Toshiba laptops?

  SATELLITE 1130-z24 will cap size similar to that used on other Toshiba laptops.

  Hello

  As far as I know the universal AC adapter part number: PA3165E - 100-240V AC, 50-60 Hz, 75W with DC 19V output would be compatible.

  Just Google for certain online offerings.

  See you soon

• Satellite 1130-Z24 turn problems

  My satellite 1130-Z24 will not on either with power supply or battery. When the power adapter is connected I get the green light from LCD on and also the battery light on.

  Hello

  On this path, it is not easy to tell what the problem may be, but in my opinion, there is a problem with electronic control gear. I put t think you will be able to fix it myself and I recommend you contact technicians.

  The only thing you can try is to remove the battery, connect the device to the power plug and try to start the device.

  Good bye

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Tecra M2: sound system stops working after a while

  Hello

  I used my TECRA M2 a year without serious problems. A moth started it my problems with audio - after the start (no matter if via boot or wake up from hibernation) his (speakers) system is functioning normally. After a while (several tens of minutes, hours) sound system stops working (no sound from your speakers or headphones). No errors appear, but not sound. When you try to adjust the volume via the Windows icon on the bar the task CPU usage becomes very high.

  I decided to reinstall my M2 - the first attempt was clean install of WinXP SP2 standard support - sound problem has not changed. Today I decided to restore the system recovery CD, but the result is the same :-(

  Any idea? -I suppose that problem Council... Now, I made a mistake when entering - beeps system (such a beep as during startup) - interesting :-/

  Except sound problem - another strange thing - when I send my XP to restart in about 10% of the attempts he goes off and does not start. Starts normally after pressing power button...

  Any ideas would be much appreciated
  TX

  Hello

  Looks like a hardware malfunction.
  Maybe it s caused by overheating.
  Check the cooling modules and try to clean it with the vacuum cleaner.

  If it doesn t help you should contact the Toshiba ASP.

• Satellite L550D - WIFI connection stopped working

  Hello!

  Satellite L550D, WIN7, Realtek PCIe FE Family controller

  My wifi stopped working suddenly.
  Although my router works fine for 2 reasons
  > I am currently connected with an ethernet cable to the router
  > I have 2 Android tablets that are WIFI connected to the router

  I read a few threads.
  I understand that I must:
  1. uninstall/reinstall 'Toshiba Value Added Package.
  2 uninstall/reinstall "Support of Flash memory card utility"
  3. uninstall/reinstall "Realtek Wlan adapter"

  Please tell me more.
  1. my Ccleaner found 'Toshiba value added package "; I can uninstall it. Once discharged, how will I re - install the new version of PVAT?
  2. How will be the uninstall/reinstall "Support of Flash memory card utility"?
  3. How do I uninstall/reinstall "card utility technical support Flash?

  I'm sorry. It is obvious to you. I am only a user of PC; and it's not obvious to me.

  Thank you.
  Concerning

  Flamboyant

  Hello

  Before you begin to uninstall or reinstall some Toshiba firmware, I would like to know what Satellite L550D-xxx you exactly.

  The point is that different L550D models were equipped with a different wireless network cards.
  Not quite sure if your have a Realtek Wlan card. It looks like a Realtek LAN card.

  However, you must first check if the wireless network card is recognized correctly in the Device Manager.
  In the Manager of peripheral devices, network cards, you should see LAN and WLan card.
  In the case where the card WLan display correctly (no yellow exclamation) WLan driver installation is not necessary.

  In this case, you should go to the next step: check if you can enable / disable the wireless network adapter using the FN + F8 key combination.
  Where this is not possible, check if other keys FN function.
  Where other keys FN don t work, you must reinstall the software mentioned (Toshiba Value Package added, Flash cards).

  This can be done in the control panel-> programs & features
  After that the two software can be removed, clean the system using CCLeaner.
  Now, you can check the EU Toshiba driver page http://www.toshiba.eu/innovation/download_drivers_bios.jsp to download the software deleted.
  Installation is easy; Unzip the package and run the installation exe file

  Then you should be able to use the FN + F8
  After that the WiFi network has been successfully activated, go to the network & sharing Center-> manage wireless (left) and click Add to configure the new wireless network

• Satellite C855 - speakers suddenly stopped working

  I have a Satellite C855-1J2 running Windows 7 Edition Home Premium SP1. I turned on December 21, 2012 and installed five applications - the latest versions of Firefox, CeltX, Notepad ++, Open Office and Microsoft Security Essentials (I removed McAfee). I have the latest Windows. Since then I have not installed other applications.

  Three days later, my laptop was working fine until, suddenly, that the speakers stopped working. I can identify the specific incident that caused it. I connected a pair of perfectly ordinary headphones using the standard headphone jack, power the laptop off, after that I was done listening but headphones plugged on the left.

  When I turned on the laptop back the next day, no sound came in headphones.
  When I unplugged them, no sound came from the speakers.
  I rebooted my machine and the speakers worked fine.

  However, I am now in a situation where whenever I turn on my laptop, the speakers do not work and they will work again when I restart then. A little investigation of this problem shows the following...

  Whenever I turn on my laptop and go to control panel-> hardware and sound-> manage Audio devices I see two items:

  (1) ' - high definition Audio Device - speakers not plugged"with a speaker greyed out icon with a red arrow.

  (2) "audio digital (S/PDIF) - high definition Audio Device - default device" with a colored external amplifier icon (it looks a bit like a DVD player) with a green check mark. There is an icon of audio level next to him that shows sound whenever the sound is played on my laptop, but no sound is audible, either through my speakers or headphones.

  Whenever I then reboot my laptop and go to control panel-> hardware and sound-> manage Audio devices I can see an article:
  "Speakers - Realtek High Definition Audio - Default Device" with a colorful speaker and a green arrow icon. The sound works perfectly well.

  I already looked online and the Toshiba forums for a solution to this, but while I found lots of people with similar problems of speaker with Toshiba Satellite laptops, I have not found a solution (and when I say something, I mean something a little more useful that "have you tried completely reinstalling your operating system') so this thread.

  Even if a reboot is currently to solve my problem, I obviously shouldn't have to restart my machine at all in order to get something as simple as his, so my questions are:
  (1) what is the cause of this problem - in other words, why what is happening?
  (2) what is the Toshiba solution to this problem?

  Thank you very much.

  Hello

  It seems to me that the issue you described above that the speakers would not be chosen as device by default, but the Audio Digital (S/PDIF).
  Somehow the audio driver cannot detect the first initialization of the system speakers.

  I don't know why this happened but I have two proposals:

  (* 1) * uninstall the audio driver from the system. Download the driver from his most recent of the Toshiba page and install it after restarting the laptop first.

  (* 2) * if installing the audio driver is not enough, the last resort would be the recovery of the system.

  (> 2) what is the Toshiba solution to this problem?
  If you want to get a recommendation of Toshiba, I would give advice to connect with people. It is the community of users.

• Because I installed a Satellite L300 printing software stopped working

  Hello!

  I'm new here so not sure if I'm posting in the right place. Mods, please do not hesitate to go to the relevant section, thank you.

  OK, I have a Toshiba Satellite L300 laptop and since I installed a printing software Wednesday evening, my laptop suddenly stopped working!

  Since Thursday night, I tried to make it work, but I am faced with this message:

  When I load up, it goes to Windows error recovery:

  "windows does not start.a recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.if power was interrupted during startup, choose start windows normally"

  then it gives two options: Launch Startup Repair (recommended)
  Start windows normally
  ==========
  -then I click on (recommended) launch Startup Repair
  -then a scren called load' system recovery options «...» It is said: select an operating system to repair, click next.only windows vista listed operating systems and can be repaired

  If you do not see your operating system listed, click load drivers to load the drivers for your hard disks...

  but nothing comes up so I click load drivers and it gives me just loads of records at random... and I don't have any idea those to load
  ========
  5 years report an abuse
  Additional details
  so I click "next".
  ========
  Then, I have 5 options:
  -Startup Repair
  -system restore
  -windows complete pc restore
  -windows memory diagnostic tool
  -command prompt
  ==========
  Startup Repair says that manually, it can't solve any problems

  -simply said system restore your computer is located in a limited State, and this action can not be changed... but there is no option to do so

  -restoration of windows complete pc says I need to insert a backup disk which I do not have

  diagnostic tool memory Windows says that windows blocks it
  ============
  but on restoring system it tells me to type something like: rstrui.exe /OFFLINE:C:\Windows
  but I don't no where... I typed in the command prompt, but don't understand how to use it
  =========
  I also tried to click Start windows normally, but it won't work

  If the problem is the software installed, start Notepad in safe mode and try to start restoring the system from there.
  Please let me know what options are available. Can roll you back OS a few days back?
  Are some that are listed restore points?

• Satellite A300 - some keys stopped working after downgrde from Vista to XP

  Hello

  Excuse me for my bad English. I have a problem with my Satellite A 300 PSAG4E-0450. Operating system went from Vista to XP. Easy keys, keys shortcut and illumination stopped working. All the drivers have been downloaded. I tried to find it in Control Panel-> Toshiba controls. I changed to bright power, but this isn't work. If I try to turn it off, I see a window with "choose order".

  What can be wrong?
  Thanks for your help.

  Hello!

  As far as I know, the lighting can be disabled and enabled in the BIOS.
  Check it!

  To shortcut keys, you should try to install the Toshiba controls and utilities hotkey.
  From Toshiba Web site: http://eu.computers.toshiba-europe.com

  I hope it's useful for you.

  Good bye

• Satellite C650 - sound suddenly stopped working

  Hello.

  I bought this laptop the month last November.
  in any case, around a week or two ago, the noise suddenly would not work.

  He started making strange noises when I put in the headphones and speakers just made no noise at all never.
  I did a lot of weird things - like system restore, reinstall audio drivers but nothing worked until I updated the bios, then everything went well and the sound worked again.

  However, today, the sound suddenly stopped working again. I tried to re - install the current bios but InsydeFlash says: "the version of the ROM file is the same BIOS version" and just closes.

  I searched the internet for an older version of the bios, but when I try to install it, InsydeFlash said: 'the version of the ROM file is not newer than the version of the BIOS' and of course, I know that but then it closes too!

  I'm not really good at computers or anything, any help at all would be appreciated.

  Thank you.

  Hello

  I recommend checking some options first;
  -check if mute is not activated
  -check if all the volume controls are set to a higher value
  -check if the sound using headphones

  If this is not successful, you must reinstall the audio driver.
  First go to Device Manager and uninstall the audio driver. Restart the device
  Download the audio driver from the Toshiba page, then reinstall it. Reboot once again and test the sound.