Satellite 1800-400: cannot run/install applications after installing XP
I bought a Satellite 1800-400 for my daughter for her school work, formatted, installed XP pro, and when I tried to install the software for a wireless card (3Com) for internet access, he said only: "the application failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.
So I tried another card (Belkin) software it says "D:\ is not a valid Win32 application". So I tried to install the printer software and he says: 'the entry point of procedure not found in KERNEL32.dll dynamic link library.
So I thought I'd try XP Home, exactly the same, Win 98 and WinME function without problem.
I have also flashed the Bios, but it made no difference.
Someone at - it ideas
Simes
Hmm, it s very strange. For me, it seems that some applications are not compatible with Windows XP. I m not 100% sure why it happens, but I put t think that it s a RAM problem because the other Windows Me and 98 to work properly.
But nothing is impossible
What version of BIOS is installed on your laptop? On the Toshiba page pilot 2.20 BIOS was released.
If your laptop uses an older version, you can try to update.
Tags: Toshiba
Similar Questions
-
Satellite 1800-400, ERROR! F3D failed
Someone can help me troubleshoot above?
First of all what does this mean?
I had a very small Satellite 1800-400 with me running. I was convinced that it was full of viruses so wanted to start all over again with the recovery disk. All I got was this error.
In addition, it is said software being installed, please wait and a 0-100% bar. (nothing happens)
Being a novice surf autour, I picked up a new BIOS @ this site. After the install was not successful so I used the command chgbiosa on the a:\, this gave me a command prompt to enter the biosfile in and I have upgraded to version 2.2 (I really thought he could help silly)
Retry the recovery disk didn't give no solution so I'm really looking forward to all the solutions to this disaster.Hi sms,.
Sounds strange! Is the recovery CD in good condition? Is this perhaps a scratch?
Goodbye Tom
-
Satellite 1800-400 ME upgrade to XP Pro?
All successful one satisfactory to a Satellite 1800 400 upgrade or similar (384 MB of RAM, 20 GB HD, 800 MHz Celeron) of Win ME?
Would prefer to upgrade to XP Pro, but pure install 2nd choice.
If I have the HD format for a clean install, an updated XP version would recognize the recovery CD Toshiba a legitimate copy of the ME - I've heard that there may be problems?
I have the intention to upgrade the BIOS and collect all the drivers available for this model proposed by Toshiba for XP, but will there still be problems with all the material?
Toshiba drivers must be loaded in a special order, and that is during or after installing XP?
XP is likely to be faster or more slow/about the same thing as ME, with above hardware specifications?
All advice welcome, because I have not upgraded the OS on a laptop before, and the potential problems seem more important than with desktop computers.
Geoff
Hello
I put t not see why Windows XP Home edition should not be working on your device correctly. On this forum I have read many topics where users present on Windows XP Home edition on the old models as yours.
Please see the download page for Toshiba under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp and you will find drivers for Windows XP Home edition.
After installing WXP install display and sound driver first. Then install other drivers of material. The next step is installation of Toshiba stuff:
Common modules
Controls
Energy-saving
Public services.It is important to install common modules like the first.
-
How to connect by Satellite 1800 400 on TV?
Hello
I want to connect to my Toshiba Satellite 1800/400 on my TV, but I don't know how to install a secondary graphics card. My graficscard is a Trident Cyberblade Ai1 video accelerator.
Please help because I get hopeless and frustrated because I need for schoolHello Kevin
As far as I know you don t need to install a secondary graphics card. The laptop got the output video output jack to transfer NTSC or PAL data to external devices (TV).
If you want to activate the TV-out function, please go to display properties, and then click Advanced. Now click the device tab to display.There you can set the parameters on television and in the multi-screen TV/LCD devices section. Don t forget the TV Standard (PAL or NTSC).
However, with the FN + F5 key combination, you can choose between the LCD and TV.Good bye
-
Satellite 1800-400: need DVD - Rom
I'm looking for a dvd - rom for a Satellite 1800-400. Where can I get one?
Hello
If you check the manuals for Satellite 1800, you will see that this camera comes with different drives. One of them is SD-R2002. Google all over the place. You will find a lot of online shops where you can order one. Another solution is the Toshiba service partner.
By the way: check the ebay also.
Good bye
-
Satellite 1800-400: CD broken
Hey,.
A week ago, my CD-ROM started acting weird. It doesn't read any cd what so ever. I want to replace it, but my question is... I can do it myself, and if not it'll be expensive...?My Toshiba Satellite is a series of 400-1800
Hello
Sorry, but the DVD of the Satellite 1800-400 drive is set up.
If you have no chance to swap it out.
Good bye
-
Satellite 1800-400: CD Rom is not working / can't use recovery discs
Hello
I have a satellite 1800-400. The cd present in Device Manager, but it does not recognize the cd is in the drive. I need to use the recovery cdsas the system was damaged virus etc. Is there a way I can work around the problem of cd player.
Thank you
Hugues.
Hi Hugh,.
When you try to start the laptop from the CD made in fact tru to access the CD-ROM or it directly boot from HARD drive?
If the notebook is actually an attempt to boot from the CD but do not then it can mean that you CD-ROM is defective or that the recovery disc itself is damaged in some way.
HTH
-
Install the ear of Console - cannot run the application.
JDeveloper 12 c 32bits.
I'm checking my ear is produced correctly by deploying the console of weblogic (which is really just the integrated environment).
The installation says it works great... but I can't launch the web page by using the same URL I used the deployment of Jdeveloper.
I was capable of that test applications with little (with security). But the Application that I just spent a month of work on is a failure!
Some features:
The ADF security is on. I have an application role, two users, and set up a same business role.
users are granted to the role of the company.
The role of the App is given to the role of the company
Each workflow task and web pages are granted to the role of an application.
WebLogic is configured with users and the role (which both correspond to users and the enterpise role in the security of the adf).
The screen 'set up the Security deployment.
Checked the weblogic application update. XML with the following parameters
Application enabled policies
Uncehcked credentials
Groups and users not controlled
Unchecked Auto generate and synchronize Weblogic JDBC descriptors during deployment
Can I deploy on Jdeveloper to Weblogic Server the Integrated and it works.
Connect the output: I get this when deploying Jdeveloper (it works) and when I install the ear to Weblogic (installation works, but I can not run the application).
< 25 November 2015 14:54:52 this > < WARNING > < Application customer > < BEA-2162200 > < no hand-class defined in the Java Module manifest file: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped. >
< 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.credstore > < JPS-01033 > < cannot set credentials. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >
< 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.upgrade > < JPS-06003 > < cannot migrate the information to key/identification of the AISMainMenu-4131/anonymous file #ERPD. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >
< 25 November 2015 14:54:57 this > < WARNING > < HTTP > < BEA-101384 > < WLServlet annotation is deprecated, use instead servlet 3.0 annotation. App:AISMainMenu@AISMenu, Class: oracle.adfinternal.view.faces.activedata.AdsServlet >
I can deploy from Jdeveloper, but if I have a deployment on the built-in console (an ear file) of weblogic server, I can not run the application.
I get the wrong URL? It should be the same as the deployment of Jdeveloper on the integrated server.
Thank you
Stuart
This is the error
Error 404 - not found
Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1:
10.4.5 404 not found
Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address
Timo, Dario,
I finally got to work. I fiddled around so much with her, I don't know exactly what fixed - or a combination of two settings.
Thank you very much for your help!
Stuart
-
Cannot run windows applications 8 on my computer toshiba satellite laptop
Hello
I have a Toshiba satellite laptop and I recently installed windows 8 on.but when I try to run windows store applications such as mail, people, message the app is shown as it loads then it is hidden.so I can't run any application, it disappears immideatly and does not load.could you help me solve this problem.Thank you!Hi Benjamin,
For the question links to applications, please try the following steps.
Method 1:
You can see the steps from the following link.
What to do if you have problems with a soft
Method 2:
Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:
(a) select the Internet Explorer tile on the start screen.
(b) turn left click on the settings icon in the lower right.
(c) select Show the desktop. You will be guided to desktop Internet Explorer.
(d) select settings (speed) icon in the upper right.
(e) select Internet Options in the menu drop-down.
(f) go to the connection tab on LAN settings from the lower right of this window.
(g) uncheck the box that says "use a proxy server for your LAN settings.
Please post with the State of the question.
-
Satellite 1800-400: How do I install the driver for graphics card
Hello
As I mentioned in the topic I downloaded a graphics card driver
http://be.computers.Toshiba-Europe.com
for my Satelitte 1800-400.The problem is that the Once unzipped downloaded zip file does not contain a Readme with some information or an .exe file to install.
I have no idea what to do with it, but I need the driver car-DVD playback is disappointing.
Thank you in advance.
Hello
Well, if the folder doesn't contains all .exe files, then you should try another option.
Go to Device Manager and select the graphics card. Then right click and choose the option install or update driver. Then choose the driver source.
This procedure should work properly. -
Satellite 3000-400-Accupoint does not work after installing Windows XP
Hello
I installed Windows XP (SP3) on my Satellite 3000-400, but the Accupoint II trackball does not work. It is not mentioned in the hardware Manager and I can't find a driver.
Sorry for my bad English.
Hello
Do you mean that you can not use the touchpad buttons too?
Hmm, sounds a little like hardware delivers what do you think?Have you tried to install a driver for touchpad?
I didn't find the driver for the touchpad for Satellite 3000-400, but I found a satellite 3000-504 (the drivers are placed in the Archive)Try to install this driver and check if it helps.
-
Satellite 1800-400, what CPU?
Hey people,
Just got me a second hand 1800-400, but it is a bit slow. I have stopped more RAM (256) to go with the 128 that is already. I hope this will help.
But I was thinking, what other/faster CPU can this small handful of the machine? I can get a P3 1 GHz cpu on ebay cheap but it the system to run it?See you soon
SYMHello
I looked at some other Satellite 1800 models specifications and discovered that they use different processors. Most of them use Celeron 1.0 GHz and 1.1 GHz, I also found a model with P3 1.0GHz (1800-804). But I think it's using a different chipset, so I don't know if you can use a P3.
Besides I don't think that a little better CPU will increase the performance so much. Upgrading RAM is more effective.Good bye
-
Cannot run the application, appdata not available
I can't run the applications that I install. He tells me %APPDATA%\microsoft\windows\sendto cannot be accesed
Hello
- Since when are you facing this problem?
- You did any recent changes?
- Have you been able to run the same applications before?
I you suggest trying to run the program as administrator and check if this can help, right-click on the program and click Run as administrator.
You can also try to perform the clean boot and check if it helps:
http://support.Microsoft.com/kb/929135NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.
It will be useful.
-
Cannot run this application on your PC message
I just bought the new bundle Photoshop Elements and first. I get the message "this application cannot run on your PC" when I try to install it. I am running Windows 10 Home version 1511. My device meets all of the requirements listed. I have elements and first 10 currently on this unit and they work without problem.
Are you using Adobe download links? If not, give them a try.
-
Cannot run the application because of the failure of deployment
Hi all
I try to run the application that was working fine until today morning. When I try again once I am getting an error something like this:
[14: 46:16] # incomplete deployment. ####
[14:46:16] Error listing directory file:/C:/Users/kxnt334/AppData/Roaming/JDeveloper/system11.1.1.4.37.59.23/o.j2ee/drs/Export_word_conditions/ViewControllerWebApp.war/WEB-INF/lib/AMTeamIssues/NomsigApprovalProcessIssue/Nominated_Signatory_Approval/Nominated_Signatory_Approval_Process/public_html/
# Cannot run application Export_word_conditions due to the deployment on IntegratedWebLogicServer error.
[Export_word_conditions application stopped and cancelled Server Instance IntegratedWebLogicServer]
I use the jde11.1.1.4.0 version. I tried to deploy it to the default weblogic server.
Kindly help me on this.
Thank you
Phani.Hello
Try clean after all. (Build--> clean all). Also restart the server.
Maybe you are looking for
-
So how do you REALLY just toolbar buttons show the icons (and not text)?
On my bookmarks toolbar, my favorites 'buttons' display the icon AND text. I want to just display the icon, no text. When I right click, customize, the "Customize toolbar" window opens. Down in the lower left corner the drop of the "show" option is a
-
I want to add a Windows operating system. It takes on the boot drive?
I have all of the required components to install Windows on a Mac Pro using VMware Fusion. The operating system Windows needs to be installed on the Mac startup drive, or can it be on its own internal drive? All the descriptions that I can find on th
-
Video or all simply fails at it does not record my 3D Qosmio X 775
Hello I have a Qosmio x 775 with webcams stereo but when I try to record 3D video he stutters everything goes full screen and distorted shows 2 video screens and saves the video side by side... that when I use the Toshiba 3D player, it just shows he
-
HP EliteBook 8460p - support for the shortcut key - Windows 8.1
Hi guys,. I have trouble getting my HP EliteBook 8460p Hotkeys in Windows 8.1 - at work - it someone you know this problem and maybe can tell me/us a solution to this? I tried to install "HP Hotkey Support" in these versions: 4.6.10.1, 5.0.11.1, 5.0.
-
Which method of capturing time event is more accurate?
Hello I am trying to capture a timestamp of a few kinds whenever data acquisition receives a pulse, I have two methods (attached) which give a slightly different time. One method is to use the 'get time stamp' while the other is to use the 'Clock Tic