Cannot run this application on your PC message

Similar Questions

• When I try to open Windows Live Movie Maker, he said computer cannot run this application.

  Windows Live Movie Maker

  I was finally able to install the Windows Live Movie Maker. (I used the older version that came with the computer when you purchase 2 years ago) He rejected me several times. After I updated everything that was necessary to meet the requirements. Finally he installed successfully and I have restarted the computer by following the instructions. Now when I try to open it, it says computer cannot open it. I've rechecked all the requirements, memory card, have Vista SP2, DDI, ect... then why doesn't it opens. I'm not a person real computer savey, so I hope I'm not over my head.

  You are in the wrong forum.  This forum is for the Vista installation.  Please use the Windows Live Movie Maker Support page at

  http://explore.live.com/Windows-Live-Essentials-Help-Center?T1=T3

  and the Movie Maker Forum

  http://www.windowsmoviemakers.NET/forums/default.aspx

• problems of the admin: message saying insufficient privileges: you must be an administrator when you run this application for the first time

  I bought this new comp with windows 7 already installed. has worked fine up intill a week or two it y a. I installed a new game, and after installation, I press launch to play it and pop up with a message saying not sufficient privileges: you must be an administrator when you run this application for the first time. also, I thought that I must be the administrator when I tried to launch the disk defragmentation. my account is the administrator account so I don't understand why they say that.

  I'm sorry. I was reading through additional FAQS regarding the same problem. I saw where someone said to try to add another admisistrator account to try to take on the former. but I had no luck with this ether. I also downloaded the program of the UAC, and I turned it off, reset my computer and still no change to my problem. I also tried to download the MSE restore tool, but I found myself with a message saying that I have no MSE

  Sorry, the MSE tool is to set the MSE when its broken.
  UAC controller Tool v1.0 can be used to control the
  The UAC settings.

  However, I suggest you restart the PC and after BIOS hold the F8 key
  and when the Windows Startup Menu appears, select Mode safe mode with networking.

  Now, you will enter Safe Mode. On the page to connect, you will see the
  Standard Windows administrator click it to open a windows session, press and hold
  in mind, the password can be blank.

  Once you have done that make a new account administrator and giv it a name.
  Restart the PC. That you did this newspaper using the new account.
  Once you have done that decide what to keep with your current administrator
  account once you've done it restart the PC, BIOS hold down the F8 key and
  Select Mode safe mode with network and enter dependencies the Standard Windows administrator.

  Go to control panel-> user accounts control and security for the family-> user accounts, then
  Select manage another account. In the list, select the administrator account
  your select and then delete the account, then it will ask you if you want to keep
  files etc, it's your own decision. Itknowledge24.com

• You are not authorized to run this application. Contact your administrator.

  Hi, my new users cannot log into Primavera. They get an error like "You are not authorized to run this application. Contact your administrator. ».

  

  Hello

  You must allow access to professional Module P6.

  According to Primavera P6 version you are using, the configuration is different:

  If you use P6 EPPM: Admin (or management) > user access > access to the Module > check P6 Professional

  Is using P6 PPM: Admin > users > access to the Module > check P6 Professional

  Kind regards.

• Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. On the other hand, it please launch Adobe Photos

  Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. "Instead, please run Adobe Photoshop elements 13 of your Application folder. I tried this but it does not work. What to do to run the program?

  Follow these steps, Editor does not start | Mac App Store version

• Photoshop and first 13 items: when you try to start either startup, a message, please do not run this application from this application package,

  Message: Please do not run this application from this application package. On the contrary, please put in... from your applications folder.  Trying to find applications said, they do not seem to exist.

  Program worked well... me if because of the update on the App store?

  There has been recent technical problems with Apple, with the only version of the editor. Go to this link:

  Fix the App Store

• "The operating system is currently not configured to run this application"

  I just bought a new pc running Windows 7.  Due to problems on my old pc operation
  I no longer use it.  I copied the Microsoft Office 2003 from the old pc on a flash drive and
  then copy the program on my new pc running windows 7.  When I try to open the program I get the following error message: "the operating system is currently not configured to run this application.  I'd like your help.

  You cannot copy the program files and install it that way. You need to install MS Office 2003 on your new computer by using the installation CD. If you have more, then buy the version of Office 2010 (the latest version of Office) you want and install. If you do not want to buy Office, then you can use Office Web Apps free for very basic work or download/install the freeOpenOffice suite , which can read/write MS Office file formats. MS - MVP - Elephant Boy computers - don't panic!

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Cannot open this application because it is not supported on this architecture CS5 on 10.5.8

  I just installed Adobe Creative Suite 5 Design Premium on my Mac running OS X Version 10.5.8. Once the download is complete, I tried to access my apps to see all program names are grayed out. When I double click on it, I get the following message: "Cannot open this application because it is not supported on this architecture."

  My computer is quite recent and it runs on an Intel Core 2 Duo processor. Someone else has experienced this problem or maybe having patches? I'm on hold with Adobe Support, but the waiting time is 1 hour 30 minutes... never heard of that before, but I'll wait as long as it takes.

  Any help on this would be greatly appreciated.

  That error pop up if the application is not installed. Adobe is never known for very useful error messages.

  Bob

• "Impossible to find a version of the runtime to run this application."

  I just bought a software Newnovelist 3. When I tried to open it, I learned that I had need of .NET Framework number blabla I downloaded, rebooted computer. Now I get "unable to find a version of the runtime to run this application? What is NOW? I appreciate your wisdom.

  Uninstall the .NET framework and reinstall the latest version.  The error in question is probably the cause of a corrupted installation or download of the .NET framework.

• Downloaded Windows 7 Pro trial version (previously using XP pro); currently a student of Microsoft Office 2003 version not in "all programs"; directly from the place of the app to get "operating system is not currently configured to run this application"

  Trial download using Windows 7 Professional (previously had XP pro)
  Student Microsoft Office 2003 version is no longer in "All programs" on the start menu
  Running EXCEL, WORD etc application of the subdirectory of the program file generates "operating system is not currently configured to run this application"
  Still have diskettes for installation for Office 2003, but the box with the product key is lost, this effect cannot be re - install.
  Microsoft Office does not appear in Control Panel programs in Windows 7
  How can I get Microsoft to work again without reinstalling Microsoft Office?
  If I have to re - install, how I get lost product key for Microsoft Office?
  I tried using Compatibility Wizard without result.

  Hello
  Welcome to the Microsoft answers site.
   
  The question you have posted is related to Outlook and would be better suited to the Microsoft Office community.
   
  Please visit the link below to find a community that will provide the best support.
   http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
   
   
  Thank you and best regards,
  Azam - Microsoft Support

• I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version?

  I downloaded the new version and it says: you cannot use this application with this version of Mac os how can I download the older version? My os is 10.4.11

  You can read this article: Firefox no longer works with Mac OS X 10.4 or PowerPC processors to read about the EOL for Mac 10.4 support and what the best options going forward.

• I have removed Java 7, now I get "unable to find a version of the runtime to run this application.

  I have removed Java 7, now I get "unable to find a version of the runtime to run this application.

  Well Yes, if the application requires Java to run, you have to reinstall Java to get the app runs.

• Install the ear of Console - cannot run the application.

  JDeveloper 12 c 32bits.

  I'm checking my ear is produced correctly by deploying the console of weblogic (which is really just the integrated environment).

  The installation says it works great... but I can't launch the web page by using the same URL I used the deployment of Jdeveloper.

  I was capable of that test applications with little (with security). But the Application that I just spent a month of work on is a failure!

  Some features:

  The ADF security is on.  I have an application role, two users, and set up a same business role.

  users are granted to the role of the company.

  The role of the App is given to the role of the company

  Each workflow task and web pages are granted to the role of an application.

  WebLogic is configured with users and the role (which both correspond to users and the enterpise role in the security of the adf).

  The screen 'set up the Security deployment.

  Checked the weblogic application update. XML with the following parameters

  Application enabled policies

  Uncehcked credentials

  Groups and users not controlled

  Unchecked Auto generate and synchronize Weblogic JDBC descriptors during deployment

  Can I deploy on Jdeveloper to Weblogic Server the Integrated and it works.

  Connect the output: I get this when deploying Jdeveloper (it works) and when I install the ear to Weblogic (installation works, but I can not run the application).

  < 25 November 2015 14:54:52 this > < WARNING > < Application customer > < BEA-2162200 > < no hand-class defined in the Java Module manifest file: empty.jar. This module will be treated as a utility JAR and subsequent initialization steps will be skipped. >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.credstore > < JPS-01033 > < cannot set credentials. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:55 this > < WARNING > < oracle.jps.upgrade > < JPS-06003 > < cannot migrate the information to key/identification of the AISMainMenu-4131/anonymous file #ERPD. The oracle.security.jps.service.credstore.CredentialAlreadyExistsException pattern: JPS-01007: identification with the card AISMainMenu-4131 and anonymous #ERPD key information already existing... >

  < 25 November 2015 14:54:57 this > < WARNING > < HTTP > < BEA-101384 > < WLServlet annotation is deprecated, use instead servlet 3.0 annotation. App:AISMainMenu@AISMenu, Class: oracle.adfinternal.view.faces.activedata.AdsServlet >

  I can deploy from Jdeveloper, but if I have a deployment on the built-in console (an ear file) of weblogic server, I can not run the application.

  I get the wrong URL?  It should be the same as the deployment of Jdeveloper on the integrated server.

  Thank you

  Stuart

  This is the error

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address

  Timo, Dario,

  I finally got to work.  I fiddled around so much with her, I don't know exactly what fixed - or a combination of two settings.

  Thank you very much for your help!

  Stuart

• Cannot run windows applications 8 on my computer toshiba satellite laptop

  Hello

  I have a Toshiba satellite laptop and I recently installed windows 8 on.
  but when I try to run windows store applications such as mail, people, message the app is shown as it loads then it is hidden.
  so I can't run any application, it disappears immideatly and does not load.
  could you help me solve this problem.
  Thank you!

  Hi Benjamin,

  For the question links to applications, please try the following steps.

  Method 1:

  You can see the steps from the following link.

  What to do if you have problems with a soft

  Method 2:

  Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:

  (a) select the Internet Explorer tile on the start screen.

  (b) turn left click on the settings icon in the lower right.

  (c) select Show the desktop. You will be guided to desktop Internet Explorer.

  (d) select settings (speed) icon in the upper right.

  (e) select Internet Options in the menu drop-down.

  (f) go to the connection tab on LAN settings from the lower right of this window.

  (g) uncheck the box that says "use a proxy server for your LAN settings.

  Please post with the State of the question.