Satellite A10 - why the highlighter continues to go away in the circle?

Portable satellite A10.

I boot uplabtop on the desktop, no problem. The problem starts when I click on 'Start' and the highlighter moves from a start point to another and it will always be moving around visicous cycle.

the keyboard were simply change (by Toshiba Service Centre). The problem already exists then we but this is perhaps the key board but apparently it isn't, but they change it anyway without trying to solve the problem, they are back in square 1.

Please advice if the mobo has a problem? In fact, even after reformatting the hard drive, the existence of the problem and I try to reformat again, thinking he can't do in the right sense first time round. Please advice, TIA

> I boot uplabtop on the desktop
Sorry, but we start with this? What exactly do you mean? What is UPLABTOP?

Tags: Toshiba

Similar Questions

  • Satellite A10 S203: the CPU fan does not work properly?

    I have toshiba satellite a10 s203 and the cpu fan does not work correctly. What can I do about it?

    Hi SACRIFICE them.

    Here are some possible solutions to this problem of fan.

    1. When you have installed a base installation of MS (not the Toshiba Recovery CD) you need to install the Toshiba Power Saver and others utilities from the CD tools & utilities. The energy saver is responsible for the control of the fan.

    2. If you have a recovery based OS, you can update the energy saver of http://eu.computers.toshiba-europe.com site Web Toshiba under Support & Downloads - Download Driver

    If please check this and an answer then follow the next step!

    CAMPino

  • Satellite P100: Why the graphics card Nvidia 7900 is not available in the United Kingdom?

    Why nvidia 7900 GPUs is not available in the p100 to the United Kingdom? Europe & Middle East the 7900gs is available in the continent. The 7900 gtx in the States is available.

    Why?

    Hello

    I put t believe that it of not possible to buy a P100 with the graphics card Nvidia 7900 to the United Kingdom. If you can't buy it forms mobile phone dealer in your city, so I'd check the shops online cell phone.
    I studied a little bi and found these P100 units with the graphic card nVidia 7900.

    Satellite P100-426; P100-194; P100-191; P100-196; P100-215; P100-222

    I found three different cards which were delivered with the P100:
    NVIDIA GeForce Go 7900; GeForce Go 7600 and Intel 945GM Express

    Anyway, the P100 is a new laptop and eventually you can't buy it in every store, but in my opinion several times this unit should be available in the United Kingdom with the GeForce Go 7900

  • The keyboard on my Satellite A10 settings

    2 of my keboard keys Satellite A10 shows the symbols wrong pressed in conjunction with the SHIFT key. Can someone advice how can I reset the keys as marked operation.

    Gerrys

    Hello

    check your keyboard settings yet? Go to start - Control Panel - keyboard - Hardware and check the settings.

    Try and hold me
    Pete

  • How to get the circle displayed WOT on the last window of IE9?

    Hello

    I use to see a green circle in the WOT in the upper left corner of my previous IE8 browser.

    I have installed the IE9 yesterday and circle of the WOT disappeared. !!

    Any ideas why the circle WOT is this?

    Concerning

    WOT supports only 32-bit version of Internet Explorer (6 and above) - it does not protect the support / 64-bit.

  • Satellite A10 - how to get the new job of CPU?

    Hi all

    Cut long story short:

    I own a Toshiba Satellite A10 former model Celeron 1.8 Ghz processor, running Windows XP SP3.

    Just bought a 2.5 Ghz Celeron processor SL75T, verified even FSB, same PIN, compared to the current 1.8 Ghz via Ebay.

    Do you have a swap and replace the 1.8 Ghz with the last 2.5 Ghz, the laptop is able to start, but it just hangs before entered into normal windows.

    I tried safe mode, it went smooth, however intermittently crashes, too, but unless I could enter and change some settings.

    Initially thought it was the power of thermal design of the 24.5W old abreast 35W. Although without any solid evidence to me i.e. get made reliable on temperature processor 3rd party software (coz the 3rd party software cannot run in safe mode environment), the fan is still running strong, just changed new fan not too long.

    My hunch is that, when I was in Safe Mode Windows, I could see that in the list of the hardware in the Device Manager, the processor is still showing old clocked at 1.8 Ghz and not the latest 2.5 Ghz? However, when I right click on my computer and select Properties ==> system properties, it is show 2.49 Ghz-very good, just not inside the hardware of the Device Manager list. I tried to uninstall, but it still does not work after that several reboot.

    I don't think that there is no driver for the change of processor, what should I do to avoid this 2.5 Ghz to hang up every time before, it tries to go in normal windows? I think that this should be an operating system problem I right? (not sure) Please enlighten. Thank you!!

    Hello

    in my opinion, your motherboard is not strong enough to continue to run this processor and any 2.5 Ghz Celeron processor SL75T has the same FSB and the stem.

  • How to recover the Satellite A10?

    I have a Satellite A10.
    After insering the recovery disc 1 a tab instead of tab C. Now I'm back and I have no idea how to do to return to my homepage or drive D to continue the recovery. I have no idea how to use BACK.

    Hello

    To be honest I m a bit confused
    The recovery procedure is very easy and you n t need to do anything in the BACK.

    In order to recover the laptop, you will need to boot from the recovery disc and should follow the instructions on the screen.

    Satellite A10 series is old and the recovery procedure is different in the new procedure, but you should certainly receive some messages how product

    I recommend repeat get back again;
    Put the right recovery disk in the drive and boot from the CD by pressing the C key. You can use F12 and then you may choose the CD/DVD drive in the boot menu

  • Satellite A10: Is it possible to upgrade the processor without changing all the other components

    I wonder if anyone might know if it is possible to update by Satellite A10 CPU without changing other components. The laptop has CPU Celeron [R] 2.50 GHz 2.49 GHz, 752MB of RAM.

    Hello

    If you look at the technical side, then it s surely possible.

    But I can say such things why not:

    -performance you earn is based on the costs you have marginal
    -you lose your warranty if you open your machine and you want to dare the revocation of your warranty?
    -the cooling system is aligned to your CPU, in addition, you will need to write such things as CPU microcode. If the tools to write this weird firmware are available for toshiba technicians and not us :(

    I have tried several times with all my toshis and believe me: lose money and be disappointed is a very pleasant pastime :)

    Welcome them

  • Why the highlighting of text in a PDF document does not work after you save the file

    Why the highlighting of text in a PDF document does not work after you save the file

    What application you use to highlight?

  • The country on Satellite A10 S203 modem settings

    Hello

    I have a Satellite A10 S203. I use my laptop for most in another country then my home country (Netherlands).
    I tried to connect to internet in Germany, and I couldn't change the country of the modem.

    Does anyone know so and so, how, to change the countrysetting of the modem of my A10 S203?

    GRTS Frank

    Hello

    Check this thread http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2515&tstart=50 please

    If all goes well it will help you. If this isn't the case, please write again.

    Bye and good luck!

  • Satellite A10 S103 - how to reset the Bios password

    Hello world

    I have an old Toshiba Satellite A10-S103 (model No. PSA10E - 00KWY - GK) and I forgot my bios password and I am trying to reset it by finding the jumper cmos on the motherboard (FHZSY1), but there is nowhere the J1 or pins to reset my cmos.

    Please help me

    [How do I remove a BIOS password if I forgot it? | http://APS2.Toshiba-tro.de/KB0/FAQ35002I000IR01.htm]

    + You can not remove a BIOS password yourself, if you forgot it. +

    + The laptop must be returned to an authorized dealer of Toshiba or Toshiba authorized provider that will remove the password as a service charge. +

  • Satellite A10 dies after the power LED blink

    Hello

    I have a problem with the power supply of my Toshiba Satellite A10. Sometimes, after the computer sat for some time, I have a problem with the power. The "plugged power cable" - LED will start to blink and shortly after, the computer just dies.

    It can also have the time to go into a lower energy state before he does. When it happened once, it will most likely happen also when I restart the computer, but after a much shorter time. WXP won't even have time to start. If I stop to select the source of start-up, the problem will occur anyway, this isn't the software. It should also be noticed that when the computer is not turned off, the 'smart power' - is on correctly.

    I know that my battery is not very good. Completely loaded, the computer can run for maybe 3 minutes with only the battery. I know that I must have a battery connected, even if I use the power cable, but this occurs even when the mine problem. The battery would be pretty bad not even allow me to use the computer with a cable?

    It should be added, that sometimes I can use the computer for long periods of time without this problem to happen. I also have a problem with the battery not being not properly in physical contact with the pins of the computer, but this isn't the problem here, because I have the same problem with the battery removed and me holding the battery in place.

    Thank you for your help.

    Andreas

    Hello

    You description is very long and detailed and it of still not easy to say what's wrong.
    Usually, the DC-In witness lights up green when DC is provided FRO the AC current. If the output voltage of the adapter is abnormal or if power outages, this indicator flashes orange.

    So I think that is your AC adapter malfunctions or there is something wrong with the electronic power supply on the motherboard.

  • Satellite A10: I lost the recovery CD - how do I get one?

    Hello

    I am trying to reinstall Windows XP on my Satellite A10, but I lost the recovery CD.
    I had a 'normal' Windows XP installation CD I try to use to reinstall, but installation will not take the serial number on the botton of my laptop...

    Do you know what is a workaround for this?
    And ultimately how to get a copy of the installation CD...

    Best regards

    Even

    The key that is located on the bottom of the unit is only an OEM key.
    This means that it only works with the OEM preinstalled and bundled with the laptop version. Simply said, you can't use this key with other Windows operating systems.

    If you want to reinstall the operating system from the original Windows CD, then you must use the key that belongs to this CD!

    However, you can order a new CD from recovery of the ASP in your country.
    Simply contact the guys. They might help you to order.

    Good bye

  • Re: Satellite A10-S100 - how to replace the keyboard?

    I need to replace the card key of my Satellite A10-S100.

    What are the steps I should follow? I have to unscrew all the screws in the back?

    Hi mate,

    You never exchanged a keyboard or any other part of the equipment of a laptop? Well, maybe you should ask a technician for laptop help

    I m not Satellite A10 owner but normally you remove the keyboard first (between the keyboard and display) bracket. Under the keyboard support, you will find a few screw now the keyboard. Remove them and then you can lift the keyboard but be Ume with the cable on the underside of the keyboard.

    Good luck! :)

  • After Bios Update satellite A10 had totally frozen and the display is blocked

    Hello

    Today, I tried to update my Bios of satellite A10 to 5.20.
    I downloaded the unziped file and executed, as recommended in the instructions.
    After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
    How can I solve this problem?
    Thank you very much in advance.

    Wait a moment you sure you used the right BIOS?
    As you say, your laptop is that a Satellite A10 is good?

    I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

    Sorry to say but it seems that you used the wrong BIOS!
    You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

    I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

Maybe you are looking for

  • Some files never end the backup on my Mac

    There are some files in my iCloud that never end to be saved on my Mac. It is not a connection problem. The bar that indicates the amount of data that is downloaded almost done and start again. The problem is that the new files in the iCloud never st

  • Re: reset password bios compaq mini cq10

    I have My netbook is locked and I can ' remember the password I get the error code following the CNU9512LPW bios password PLS CAN ANYONE HELP, I TRIED OUT THE CMOS BATTERY BUT HASN'T HELPED thks a lot

  • HP dv6 3230us: Bluetooth problem HP Pavilion dv6 3230us

    Hi all I'm having a problem with the BT to my HP laptop driver. I have just reinstalled my system, and although I tried to reinstall the driver of BT, at the end of installation, I get the error of "make sure that the BT module is on. What should do?

  • I have no sound from my laptop

    I have no sounds in my laptop tried the obvious things. If all goes well lol.

  • (Redirected) Change of Auditor custom search based on user

    Hello I installed change of Auditor and agent has been installed on the domain controllers. I have a specific requirement, search for events based on the user. Tried to customize the report but could not get exactly that. Ex: If a user property is ch