Satellite A100-159 and Motorola Bluetooth Headset HS815

Hello
I can not connect the headset bluetooth Motorola HS815 portable satellite A100-159.
I disable MS bluetooth and installed the latest Toshiba Bluetooth Stack V4.00.36.
It's my internal bluetooth device from toshiba:
077B = "internal Bluetooth CSR (19.2) v2.0 EDR.

(1) I turn on the headset HS815
(2) the Bluetooth manager sees a device, opening a pop-up windows where says "authentication failed", indicates the MAC ADDRESS of the helmet and ask me for the PIN.
(3) I type in the PIN code "0000" default, but nothing happens!
the HS815 is not connected,
the Bluetooth Manager doesn't list any any device.

It is:
This Motorola HS815 headset is compatible with the bluetooth Satellite A100-159 card?

Thanks a million in advance
Filippo

The error message indicates that something was wrong during the pairing process.
This is silly, but important questions.
Are you sure you have connected your headset and no other in the range? Really, the PIN is "0000" and you tyed in properly (maybe caps lock was on to your keyboard and something else has in fact been registered)?
Delete all pairing if it exists, and then try again.

Tags: Toshiba

Similar Questions

  • Cursor duplicate in Word while scrolling on Satellite A100-159

    I have a satellite A100-159. I have the following problem: in Word the cursor happens sometimes while scrolling. This means that during the scrolling I see two sliders that is 'left behind' and a real cursor (when I use PG. prev or PAGE down or box that disappears the cursor "left behind"). I already reinstalled Word and in other applications it doesn't seem to be a problem (but I have to say that I use the Word most, with large documents).

    Any ideas to solve the problem?

    Best regards, Eddy

    I think that happens because of fast scrolling of large, long word documents.
    Unfortunately, I think it's a matter of Word and there is nothing to do.
    But you suggested that happens sometimes, and only in Word so I think that it s a big problem.

  • For Portege 3490 AC adapter does not work with the Satellite A100-159

    I have a supply of 15V 120W car (or plane Kensington). It works very well with a Portege 3490CT. It doesn't do a thing with my Satellite A100-159 new. The power supply provides also 15 V 6 a. Can someone tell me why the Kensington work?

    Or does anyone have a diagram to a power supply adapted myself, preference of 11, 5-14, 12(4) and 24 VDC (23-28: 8)?

    Thanks in advance!

    Hello

    I can give t you an answer why it does not work but usually you need to use the adapter for vehicle recommended by Toshiba. Incorrect adapter may damage the laptop!
    I think that the card for Portege 3490 adapter is not compatible with Satellite A100

    That the two car/truck/Air 120W laptop charger must be compatible:
    PX1237E-1NPO
    PX1235E-1NPO

  • Satellite A100-159: expansion of memory RAM problem

    Hello

    I have a satellite A100-159. I want to increase the RAM to 2 GB. I checked the type of memory that is supported by the laptop and ordered two modules PC4200 DDR2 SO-DIMM 1 GB of the brand 'Buffalo '. I have after installing the memory and the laptop starts fine (and detects the 2 GB of RAM). However, Windows XP always freezes after login. I reinstalled the original modules and everything works well again.

    After that, I installed both modules in other non-Toshiba laptop and here they work perfectly. I know that Toshiba recommends using some partnumbers, but if the modules work fine in another laptop computer why it does not work in the A100?

    Recommended modules are almost two times more expensive. If Toshiba wants to make money by forcing people to buy expensive pieces, I will never buy a Toshiba again...

    Secondly, is it possible to use DDR2 SO - DIMM 667 modules (these are less expensive than 533 modules)?

    Kind regards
    Martijn

    Hello

    > is it possible to use DDR2 SO - DIMM 667 modules (these are less expensive than 533 modules)

    Yes, it should be possible to use the modules of 667 MHz, but generally, they should be more expensive than 533 MHz modules. Of course, modules WITHOUT name are always less expensive than brand Kingston or Toshiba memory modules.

    > Recommended modules are almost two times more expensive. If Toshiba wants to make money by forcing
    > people to buy expensive pieces I will never buy a Toshiba again.

    Don t think that they will be forcing anyone to buy expensive parts. but as already said, the brand modules cost more expensive form of low quality modules. The performance of these modules is poor. If you want you can read some computer magazines and find the tests.
    They compare the performance of simple modules. So for me it makes no sense to buy a module without name of 667 MHz because for most a brand module 533 MHz is faster and better as module 667 MHz without a name.

    I use Kingston modules in my laptop satellite and I'm happy.
    Found this site with compatible memory modules for your laptop:
    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=23148&ft=m&St=3

  • Satellite A100-159: firewire with shared IRQ controller no?

    Hello
    I work with audio production. I have to buy a laptop with a TEXAS INSTRUMENTS
    fire - wire with no shared IRQ controller. Do you know if the Toshiba Satellite A100-159 has this feature?
    If not, what else can I take?
    Is there a technical consultant on this subject?

    Thank you for your time and courtesy

    Good bye
    Umberto

    Hello

    I found information that the Satellite A100-159 uses a Texas Instruments firewire.
    In Device Manager, you should find this entry:

    IEEE 1394 compatible Texas Instruments OHCI host controller

    I hope that this information will help you

  • Satellite A100 - 01 G has Bluetooth

    Hello
    My Satellite A100 - 01 G has bluetooth capability?

    Thank you
    Trevor

    Hello

    It seems that the Satellite A100 - 01 G belongs to the PSAARE series.
    I have studied little little and searched the Internet for more details and discovered that this laptop doesn't support the Bluetooth!
    Unfortunately, the Bluetooth version is simply not available! :(

    If you want to use the BT you can connect a 3rd party BT USB stick and use it with this Satellite

  • Satellite A100-159 - FAN is always on

    Hello
    I bought Satellite A100 159 with T2500 and Radeon x 1600.
    Fan is always on. I've updated the bios and it did not help. What is more, when I put the driver ATI PowerPlay to use and when the battery is low, I get only a few scratches on the desk and the computer restarts. Windows indicates that there is problem with unknown driver.
    What can I do to stop the FAN - my CPU temperature is 28-31 cellsius and the frequency is always set to 2000 MHz (everest watch 1995 MHz).
    I think that, this fan should not run while the temperature is so low. My old centrino almost always has 40 to 50 degrees and the fan is always disabled.
    What can I do more to make the fan only works when the temperature is above 40 degrees?

    Kind regards

    I should add that my old Acer TM 4502 with Centrino has SpeedStep that makes of changing speed from 500 MHz to 1600 MHz CPU. I would like to do with my new Satellite - it might help with the problem of fan. If I change the speed of the CPU that the temperature will be lower and the fan does not spin all the time.
    I noticed that the fan is stopped when I start the computer in the morning when it is cool. After windows starts when rizes temp fan starts and doesn't stop.

    Kind regards

    Hello

    The Toshiba power saver is responsible for the processor and the fan controlling.
    Please open the energy saving mode you are using, choose the menu Basic tab and change the option method of cooling to a lower level. In addition, you can change the method of control of the CPU to auto.
    This procedure should allow to change the use of the fan.

  • Re: Cannot install Win7 driver display for Satellite A100-159

    Hello world

    I have a problem with my old laptop satellite a100-159. I still use it as a second computer. Given that the display drivers for windows 7 are available at toshiba, I decided to update the laptop from XP to 7. After the update, I downloaded the display driver for win 7 (http://support1.toshiba-tro.de/tedd-files2/0/display-20091109135931.zip)

    But here's the problem: when I unzip the file, the file "tinstall.exe" does not work. It comes to the .exe file that needs to install the driver. I also had the message "this program could not have installed correctly". As of the present results, I'm looking to 1024 x 768 while the resolution is 1280 x 800.

    Any suggestions for me? I know that the laptop is old, but that the correct display driver, it is rather useless.

    Jeroen

    Please try to run the install using setup.exe.

  • Satellite A100-233 and 500 GB HARD drive

    HI, I need help. I have the Satellite A100-233 and seagate 500 GB 2.5 "HARD drive.
    I can install this HARD drive on my laptop?

    Put it inside and do a test. Why wait for an answer when you can find it on its own.
    It will be fine if yo9u may inform this community if it works well or not.
    This information is always welcome.

  • Blocked region Player DVD Satellite A100-159

    I have a toshiba A100-159 and the dvd is stuck in region 1... is there an official way to unlock? If not how can I become a dvd player free region? or how can I reset the counter?
    Thanks in advance for your answers.

    Gerald

    Hello

    As in a formal way, I can tell just service partner, maybe. On the net you can find some region free applications, but this way is certainly illegal.

    Good bye

  • Driver satellite A100 - 599 (PSAAR) lack BlueTooth STACK

    All the hy

    When I recently downloaded new drivers from the Toshiba support page, I noticed that there is NO BlueTooth stack by Toshiba software! After an hour of research I found on this URL:
    http://APS.toshiba-tro.de/Bluetooth/DirectLink.php?SNR=2

    Please, fix this...

    Oh, I have a Toshiba Satellite A100 - 599 (PSAAR)...

    Best regards, Tadej

    Hello

    Next time before spend you hours for research post here and you will get useful tip. ;)

  • Satellite A100-147: problem of Bluetooth with BT dongle for mobile devices

    Hi guys, take it easy because this is my 1st post.

    I see there are some problems with BT and yes I am here with problems too!
    I recently had to reinstall XP PRO due to a virus, I ve installed all my drivers and even tried the recommended download links but nothing.
    When I load a BT2stack (tried different install x 64 etc.) installation driver, it came with small BT symbol in the taskbar, but when I clicked to toggle the box was just 'grey' and cannot be enabled.

    I noticed the code BW on the underside of my lappy is slightly different, but the a, just do not know if it s compatible with its location in the code.

    Code ends with 15WBT/DS2/LM/W... This seems ok or am I Bluetooth less!

    Whatever it is, the strange thing is I ve it works ok in the past by a BT toggle was having taken in the usb port, no probs in the past using this with my cell phone, but on the purchase of a new (old we had stood on) one mini disc 'pilot', it came with comes up with "E:\ is not accessible" and my disc drive is ok! weird but my 1st rocking didn't come with a disk and the other the box "found the new device" came it was straight forward.

    Axious even now I need this facility to work.

    Please, if anyone has a simple step-by-step tutorial for me to follow then that would be great. I m obviously missing something, but all leads come to a dying.

    see you soon... pete!

    PS. do not operate my FN + F8 but F1 etc seem to just put me on another page on this site?

    I confirm the information published by Blue2S.
    Satellite A100-147 was NOT equipped with the Bluetooth module!

    So you can not activate because there is NO BT!

  • Satellite A100: USB and Modem does not

    Hello!

    My name is Clarisse and I have a Satellite A100, which I use for school. I'm having a problem with its usb ports and modem.
    When I try to connect to the internet, he just say he of no tone and tells me to ensure that lines are connected, who they are and the phone line works certainly, as I checked with my PC and I also checked the phone if it was busy, it wasn't.

    I then try again and a window appears and says that there is something wrong with my modem, how can I fix?

    The other issue is my usb ports who refuse to work, they can't recognize anything I plug (for example, bluetooth adapter, flashdisk, ipod) even though they are installed!

    However, the strange thing is that when I plug in my printer it connects and does its job:(je suis tellement confus et scolaires est devrait commencer bientôt.)

    Can someone help me please?

    Thank you
    Clarisse

    Hello

    In my opinion the modem connection does not work due to the modem settings.
    Go to Device Manager and select the properties of the modem.
    Please select the Modem tab. You will find the option "wait tone before dialing." You must disable (uncheck) this option.

    I guess that the USB ports cannot recognize the external USB ports because of the power.
    The USB ports provide 500mA. It is a standard USB. If external devices use a power greater than 500 ma, so it is possible that the device may not be recognized.

    In such cases, the USB hub with an external power supply can solve these problems.

  • Satellite A100-259 and PCMCIA card reader no longer works

    I have a Satellite A100-259, I've had for about a year with no problems... so far, the PCMCIA card slot reader seems to have stopped working.

    When I insert a card reader SD PCMCIA discover the laptop hardware as a "PCMCIA UNKNOWN_MANUFACTURE' and subsequently can not find the drivers for it. I tried a couple of different PCMCIA devices and get the same question every time, I checked also double the card reader works by trying it in PC laptop Toshiba-not to the woman.

    The PC is a XP/Vista installation start-up duel and I get the same question under each operating system. I also think that it may have started after I installed upgrading the BIOS to 2.20.

    Any suggestions would be greatly appreciated, b
    Kind regards.

    Try to access the BIOS and set the defaults.
    Don t forget to save the settings after the change.

    By the way; Are you trying to reinstall the PCMCIA driver?
    Go to the Device Manager and remove the PCMCIA computer location.
    Then restart the laptop and check if Windows detects and installs the removed slot.

    Good luck

  • Satellite A100-201 and Win7 update

    Hello

    I want to install Windows 7 and Microsoft Office 2007 on my laptop (Satellite A100-201). I ran the upgrade of Windows tool that tells me that my Toshiba Configfree (version 5.90.07) will have to be uninstalled before upgrade and that it would not be able to be reinstalled after installing Windows 7... What is the Configfree, do I need for my laptop to do something 'special '?

    Thanks in advance for your help

    ConfigFree is tool designed by Toshiba and it's an interesting tool for monitoring the network. This tool runs in the background and send you all the information about the network connectivity. If there is a problem this tool offers solutions that can help you fix connectivity LAN/WLAN/BT.

    To be honest you do not have this tool and if you didn't use it in the past you will he miss any.

Maybe you are looking for

  • HP 6500 Wireless does not scan

    The printer works fine for printing, but it does not scan. When I select scan on the officejet 6500 wireless it is said: 'SCAN MENU SELECT a COMPUTER' any key on the keyboard work only 'OK '. When I select OK it says "No. Scan Option - refer to devic

  • paperJam in series dell V310

    paper keeps block in my printer.  It all started to happen, keeps jamming.  Of the clues as to why this started all of a sudden and what can do to prevent that to happen?

  • WINS

    Where can I find this on my computer?

  • Convert files into mp3 files msf

    I downloaded my Sony PCM - D50 recorder .msf files and can not play on any player on my computer. Anyone have any ideas on how to convert msf files into MP3 files?

  • Deploy finishing PlaBook App?

    Hi, my app playbook is now ready. How can I install this now on a playbook without using bbwp? Can I share the app via OTA or should I put it in the world of the other app to install them? CU UserNeo