Satellite A100: SD card reader will not read the 2 GB

Similar Questions

• Satellite Pro A100: CD/DVD player will not play the audio CD or video DVD

  People,
  I have a Satellite Pro A100, with a RUG * a DVD-RAM UJ - 841 S Drive.
  It will read fine data disks, but refuses to play with the audio CD or video DVD.

  I tried to uninstall & Re-Installing DVD - RAM Driver;
  That got rid of the "IO error" that I received, unfortunately I don't notice the full error: S.
  He now just doesn't see the drive. Someone at - it ideas?

  I did a full windows update, and the Toshiba Diagnostic util tell me anything useful except "Fail" :(

  I found a thread in this forum that describes a similar theme:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19747&MessageID=72404

  Sometimes this error is displayed because the player does not support the environment.
  Always it is every way is supported by readers and I think that in the user manual, you will find an index CDs or DVDs compatible

  Maybe the drive is defective and can not calibrate lens in the right position.
  But this laptop is not very old, and I can't imagine that the drive is defective
  However, nothing is impossible.

  What you can do is to carefully clean the lens and see that it will help.

• Satellite A100 - Questions about slow start, not in the DMA mode CD drivers

  Hi all

  as you can see I have 3 questions:

  1. my Satellite A100-153 starts very slowly (current running avira antivir and sunbelt pfw only like on my other laptop which is older than this one, but not slow start)-anyone has any idea why (I would be very gratefull because I don't have reinstall win and all my stuff)?

  2 Nero tells me that my CD is not running in DMA mode - where can I check and fix this?

  3. drivers - am I forced the drivers supported on this site or can I use the drivers directly from the manufacturer (ATI for my graphics card, Intel for my chipset realtek for my sound and so on)?

  Help is welcome!

  Hello

  For me, it will be interesting to know what operating system you are using. Anyway, I'll try to give my short opinion on your questions:

  -many other factors may be responsible for slow start. It is usually the OS configuration. I'll try to find an interesting article, how to make faster starting and I will post it here for you.

  --entrer enter in the device IDE ATA/ATAPI controllers Manager, enter the properties for secondary IDE chanel and open the Advanced Settings tab. Is under transfer mode DMA if available? If this isn't the case, set it to please and after reboot check if the problem persists. DMA if available is usually defined as a default value.

  -In general, you can use it but it is well known that manufacturers of graphics card don't support mobile graphics cards and laptop manufacturers are responsible for.

  I recommend you to use the Toshiba drivers only. All of these drivers are put to the test.

  Good bye

• Satellite A100-786: Win XP does not recognize the Bluetooth

  Hello

  When I had Windows Vista Home premium on my laptop, I used the bluetooth device normally.
  But I had to install Win XP and now he don't even know that I have a bluetooth device!

  Any help would be appreciated.

  Seems that you have not installed the driver of BT stack.
  This driver can be downloaded from the Toshiba page!

  You choose the Satellite A100 series form of the driver and download the BT software.
  Select it with FN + F8, and then follow the instructions on the screen.

• Satellite A100 keyboard input language does not match the physical keyboard

  I'm sorry.

  In fact, it is the first line:

  & é " ' ( - è _ ç Ã* ) =

  Kind regards

  Leonardo

  I have a laptop SATELLITE A 100 (model PSAARE-02X01TFR) with the french (I think) QWERTY keyboard here and may not know how to configure it under Win XP.

  It has these characters on the top row:

  (The numbers are off)

  The second line has:
  q w e r t y u i o p ^ $

  The third:
  q s d f g h j k l: a¹ *.

  The fourth:
  z x c v b n m; , !

  Any idea what and how I have set up?

  Thank you, Leonardo

  Hello!

  As Akuma, you can change the input language of keyboard in Control Panel. It is very easy and takes only a minute to change.
  Check it!

  If you have any other questions, please let us know! :)

  Good bye

• When I try printing to a custom size greeting card, it will not fill the page

  When I try to print a greeting card custom size, I can't print to fill the page, e.g. a 5 "x 5" card is put in place as 5 "x 10" but when it prints it is an important border, have tried up to this adjustment to the page, the best fit etc but not joy.

  Thank you very much for your help, I was ready to stop trying. I used already without borders for standard maps, but was having the problem with custom sizes, but by increasing the size slightly by setting without borders in custom settings, I have now managed to print a 5 x 5 "card.

• Satellite P100-324 - card reader cannot find file system

  Satellite P100-324 card reader not found on the RAW file system that uses my camera! How to solve a problem?

  Hello

  Have you tried to use the compatible card in the card slot multimedia digital several?

  In the manual, you should find the details on the right cards and compatible capabilities.
  See Chapter 8 (optional features)
  Should be compatible cards: SD, MMC, MS, MS Pro and xD.

  Please check that you probably have the right card!

• Re: Need driver for Satellite P100-346 card reader / PSPAAE / Windows Vista

  Could you please help me and post a link where I can download a driver for the Satellite P100-346 card reader / PSPAAE / Windows Vista 32 bit?
  THX!

  Hello

  Please, check here:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears

  Original title: I have windows xp.  What does "drive not valid error 1327: J:\. "means and how to fix it?

  Hello

  I have windows xp and I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears. I have no idea what this means or what to do.  I didn't know that there was such a unit, because I can not find it. I hope someone can help.  Thank you.

  Hello

  1. are you able to download another program?
  2. you have any program installed download accelerator?
  3. what browser do you use?

  Read the following article that may help you resolve this problem.
  Error 1327. "Invalid drive" | Install | CS4, CS5, Acrobat, Reader
  http://kb2.Adobe.com/CPS/404/kb404946.html

• I open my folder and make rotate the image (view), but reader will not save the rotated version (returns to original format).

  I open my folder and make rotate the image (view), but reader will not save the rotated version (returns to original format).

  "Rotate view" - possible to make using Acrobat or Adobe Reader.

  "Rotate page" - possible to do only with Acrobat.

  Be well...

• Satellite A100 - 166 PSAA9E will not charge the battery

  Hello

  My laptop will not charge the battery.
  Although Windows Xp recognize the battery and says loading, the battery does not charge.
  I tried with a spare battery that I thought that the battery was faulty, with the same results.

  Strange thing is, when I turn off the laptop the power led remains lit and the blue, even without the power supply attached therefore discharge the battery.
  The battery led is still orange but not load!

  What is the problem with the laptop?
  Thank you

  Hello

  Generally, there are three possibilities;
  (1) the adapter is faulty
  (2) the battery is faulty
  (3) the logbooks electronic malfunctions (ESF)

  So now he of needed to check all these steps to find the fault.
  You said you've tried different batteries and AC adapter works too.
  So it is possible that there is something wrong with the electronic power supply

  In this case there is not much to do to contact the ASP in your country. Technicians should check the portable and should run diagnostics tests

  I recommend contacting the guys and ask for more details and manipulation still good luck and happy new year.

• Satellite A200 28H: F6 floppy will not work when installing XP

  Hello

  I am trying to install Windows XP pro on my new laptop (Satellite A200 28 H), and since it needs driver SATA, I downloaded the driver suitable for my laptop (Satellite A200 28 H), put it on a floppy disk for use with a USB floppy drive (which works fine), press "F6" when appropriate and everything... But it simply doesn't. I had training as a technician for a few years, so even thouh that is no longer my work and I might be a little rusty, I think I still know at least a little what I do... Well, apparently I'm more image than I thought!

  I've tried several things, and this is what I get:

  * If I don't use all the disks, Windows XP will not find the hard drive. Which was intended, no problems here, don't except for the fact that it is completely useless for me :)

  * If I force the driver on the floppy disk, despite Windows tells me that is already a driver that can be used, then within 10 seconds I get a BSOD with the stop message 0x7B (found or inaccessible boot device).

  * If I use the floppy drive, but do not force the driver and listen instead of Windows ("oh, you already have a driver? ("OK, then, use and too bad that diskette"), I can actually finish the installation process. Windows will copy all the necessary files on the disk, it will even restart correctly after that and moved on. But when the installation is complete, the computer will restart, I'll see the loading for a second screen, and then, BSOD stop 0x7B again.

  I'm sure I downloaded the driver for my computer. In fact, I also tried a couple of bad drivers too, just to be safe (IE I use Intel Matrix for ICH8M, but I also tried the ICH7M to be sure), I tried with drivers downloaded from the Toshiba site, on the site of Intel and whatnot-other-website-for-newbies-or-powerusers, and I still have the same behavior as described above.

  I tried partitioning / formatting during installation, and I also tried leaving the file system intact. If I do the latter, the only difference is that I have offered 2 possible OS to boot from, the two being Windows XP and both failed miserably.

  It's probably worth mentioning that, if I use the recovery DVDs and start over and clean with Vista, I have no problem whatsoever, except for the loaded gazillion process during startup, the RAM already used half and applications useless hundred I don't give a darn on... And the fact that some applications that I need work just can not be installed on Vista.

  If anyone has any idea how to solve this problem, I would be very grateful!

  Hello

  The procedure, including the SATA drivers in Win XP using the external USB floppy drive is very easy.
  First you need to download the Storage Manager and having to put on the diskette.

  During the installation of Win XP you must press F6 for inclusion since the external floppy drive and follow the new instructions on the screen.

  _Note; _
  Very important is that your XP CD Win would contains SP2!
  Without SP2 a BSOD can appears and could break up of installation!

  Don t format or don t create all partitions after the installation of the SATA driver. It can erase the installed and included from HARD disk SATA driver.

  Last but not least some readers of external floppy drive are not supported. I read that some users had some problems with an external FDD drives they tested another drive and it worked finally

  Check the recommendations may indicate that it might be useful

  Good bye

• Satellite A350: Highlight text, and then delete or BACKSPACE will not erase the text

  I have a new Satellite A350. When I surligner highlight the text, then try to remove or back up it will not delete the text. This happens in the line URL, Windows Mail and Word.

  The key SUPPR and button both work individually, but I'm used to being able to select lines of text, and then type on (or pressing delelte) it to disappear.

  Now I can not delete text except by backspacing of the text.
  Y at - it a setting I can change or is this a problem with the laptop?

  Thank you

  Hmm, I had the same problem in Word from MS Office.
  I solved this problem by using this work around:

  -In the menu bar, select Tools, Options and then on the Edit tab.
  -Click the box called "Typing replaces selection" sub + mounting options + and then click OK.

  Check if that helps.

• Printer will not feed the paper card stock

  We have an Officejet Pro 8600 who will not feed the paper card stock. It was the printer that I used when I worked and did a great job on standard paper, but it won't take my wife stock card paper craft. We used to have a Deskjet F4400 HP all in one and we were able to print. Any suggestions would be greatly appreciated.

  John

  John,

  Welcome to the Community Forum of HP.

  Try indicating what type of media you print to the printer - if your media in the printing preferences settings do not understand "card", you should choose something else which is similar: Matt Brochure, card, 'something' that kind of card stock for the printer to the printer waits 'thick' paper looks.

  Printing preferences - Windows and Mac

  and... not really related, but may have some relevance:

  Print Labels_Business-Cards_Cards

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.