Satellite A200-1cr - two questions about the AC adapter / CC

Similar Questions

• Satellite A20-S103D: two questions about the recovery process

  Hello

  I bought the machine above my nephew - is no longer necessary.
  It runs Windows XP Home Edition and is not a Windows CD or disc of recovery of any kind.

  I have a Windows decal on the underside with the product key, but when I use "Belarc Advisor" to examine the product keys for all my software loaded it gives a totally different operating system product key! This key contains the letters OEM in there.

  As the machine is supplied with a Toshiba power management software I guess it's an OEM Toshiba of the OS version I have.

  My questions are:
  1 / this does not mean that at some point in the past, this machine was another product of Windows XP on it? (two product keys)
  2 / I can, (and), I get the Windows XP CD or a recovery for the machine, like I need to recover or to reload Windows.

  Thanks in advance to all members of the forum that meet.

  > 1 / this does not mean that at some point in the past, this machine was another product of Windows XP on it? (two product keys)

  The key you found at the bottom of the device belongs to the OEM of Windows version that is part of the recovery diskette.
  The recovery disk is already enabled so that the key is not required in order to activate the Windows operating system.
  As far as I know, that the key does not work with other versions of windows

  > 2 / I can, (and), I get the Windows XP CD or a recovery for the machine, like I need to recover or to reload Windows.
  Since it is an old, I doubt you'd be able to order the recovery for this device disc
  If you want to install the Win operating system, then you must use a Windows CD clean valid keys and all drivers may be downloaded from the page of European driver of Toshiba.
  The drivers are placed in the archive because it oldie s in order to choose the archives in the type of product to download the form.

• Satellite A200-1GH. Questions about the replacement of HARD drive

  Someone made about?
  Consider replacing _TOSHIBA MK1237GSX factory-installed ATA Device _ with HDD 320 Gb SATA - II MK3252 _Toshiba GSX_ (120±, 5400 RPM, SATA-II)

  What I'll do with the hidden partition of Windows Vista that is used for the start?
  Is it possible to ignore it?

  Any suggestions?

  > What should I do with a hidden partition in Windows Vista that is used for the start?
  The hidden partition is needed for the repair of the system!
  If something goes wrong with the system, Vista would be able to repair the system using the files from the hidden partition.
  The Vista operating system creates this partition automatically during the installation of the OS!

  After you change the HARD drive, just start using the Toshiba and Vista recovery disk should create the partitions and must run the installer automatically

• Satellite A200-1CR does not recognize the module of RAM 2 GB

  Hello

  I have a problem with the extension of the RAM.
  I have the Satellite A200-1CR with 2 x 512 MB of RAM.

  Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
  When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
  Where is the problem?

  What should I do to make it see 2 GB?

  Paula

  Hello

  I think the answer is very simple.
  Satellite A200-1CR can be upgraded up to 2 GB of RAM.
  This means that you can use max 1 GB of RAM in one slot
  You used 2 GB of RAM and this module does not seem to be compatible
  In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

  Welcome them

• Satellite A200-1CR: how to change the language of the OS of the Russia into English

  I am a student sri-Lanka, Russia.
  I bought a toshiba satellite A200-1CR Russia laptop computer, but it came with windows vista basic Russian.
  So I can't understand anything and the dealer said that they cannot change the language to English.

  So, how can I get the English vista and drivers.
  Please answer me to my private email address.
  (Toshiba satellite A200-1CR

  [email protected]

  If you want to install the English operating system, you must get OS DVD facilities on English. All the drivers, tools and utilities for your laptop, you can find on Toshiba page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp for assistance

  All that s!

• Two questions about the controller of the exporter

  Hi guys,.

  I have two questions on the controller of the exporter.

  1. as the controller of the exporter uses its own user interface, is it possible to generate new files pre-defined in the controller of the exporter to represent its user interface is happy?

  2. how the Ftp settings are stored in the preset currently file? I want to change in my own exporting contronller rather than first UI.

  It will be very appreciated if someone could answer these questions.

  Thank you.

  Hi Alex,

  (1) there is no API to create/modify the presets of the exporter, but as you can see, the .epr file is XML and quite easy to debone in most regions.

  (2) Oh, I forgot this FTP settings checkbox save.  Good fishing!   Yes, the binary data in the .epr are encoded in base64.  The last time I checked (there are several versions), Premiere Pro checksum function is a CRC 32 bit with a polynomial of 0xEDB88320L.  It is not guaranteed to remain the same from one version to the other.

• two questions about the scattered images secure

  I created an image that is secure and encrypted for sensitive documents.

  I have two questions:

  1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control.  But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias').  Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original.  Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?

  2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk).  Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available?  I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.

  Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).

  FYI: I'm running 10.11.2

  Thank you.

  (1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.

  You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).

  (2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.

• Satellite Pro S300-10J - Question about the power of the microphone

  Hello!

  I would use my S300-10J for acoustic measurements on the speakers. (DIY)

  For this configuration, I am using a microphone electret, the IBF EMM-08:
  http://www.etfacoustic.com/micpreamp.html

  for power, it's what suits him: 1.5 - 10 v / approx. 0.5 my

  The s300-10J who provides or not?

  Anyone who can recoomend a card external sound that has this provision? (if my laptop does not work)

  Thanks in advance,
  Bart Segers

  Hello

  I can't give you details on the microphone of the satellite Pro S300 tension because I didn t find all the details about the tension of mic jack, but I guess that it s a voltage standard as on others, laptops different.

  As far as I know the external portable media microphone who need 1, 5V DC.
  So I guess that the S300 this support too.

  That's all I can say about it.

  Welcome them

• Two questions about the ARCHIVELOG mode allowing

  Version: 10 gr 2
  
  Currently my DB is not in ARCHIVELOG mode. So that's what I'll do to activate it.
  
  
  Question1.
  
  Are the following steps to activate archiving right?
  
  
  
  Immediate Step1.shutdown;
  
  Step 2. bootable media;
  
  Step3 system. Alter set LOG_ARCHIVE_FORMAT = arch_%t_%s_%r.arc scope = both;
  
  Step 4. ALTER system set log_archive_dest = < archive_path > scope = both;
  
  Step5.alter database archivelog;
  
  Step6.alter database open;
  
  
  
  
  Question2.
  
  
  Oracle doc: http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/archredo.htm#i1006246
  discussions on the definition of LOG_ARCHIVE_DEST. I do not understand the keyword LOCATION shown below.
  

  LOG_ARCHIVE_DEST_1 = 'LOCATION = /disk1/archive'

  About the LOCATION of keyword, the documentation says

  The LOCATION keyword specifies an operating system specific path name

  Cannot give us just a destination filesystem as/u04/arch_logs without the keyword RENTAL. What is the advantage in specifying the keyword LOCATION?

  The keyword LOCATION allows us to specify the destination for the archived redo log files local. If you use LOG_ARCHIVE_DEST_1(1-10) you keyword LOCATION State (when you want to redo in the local server log files)
  If you use the LOG_ARCHIVE_DEST parameter, you can omit the keyword LOCATION. See the following example:

  SQL> alter system set log_archive_dest_1='c:\';
  alter system set log_archive_dest_1='c:\'
  *
  ERROR at line 1:
  ORA-32017: failure in updating SPFILE
  ORA-16179: incremental changes to "log_archive_dest_1" not allowed with SPFILE
  
  SQL> alter system set log_archive_dest_1='location=c:\';
  
  System altered.
  
  SQL> alter system set log_archive_dest='c:\' scope=spfile;
  
  System altered.
  
  SQL> alter system set log_archive_dest=' location c:\' scope=spfile;
  
  System altered.
  
  SQL>
  

• Satellite A300-1QD - two questions during the installation of windows XP or Vista

  Nice day
  Here's my problem:

  1. I just bought the Toshiba Satellite A300-1QD and since there is Vista based on it and I have Vista ultimate, I decided to install on the laptop.
  After I formatted deleated everything and I have the partition that I created a new.
  After that I installed Vista, now I'm at the point where it says complete installation and the blow bar is at about 2/3.
  My problem now is that it's now been 3 hours and nothing happens the dots next to the 'installation complete' is still occurring and disappearing.

  2 as the number one lasted so long I decided to install windows XP Professional, but when it loads after that I put the cd one has bluscreen place called chkdsk.

  What should I do now to get something on what works?

  Hello. I think that the partition table and boot loader are messed up and it's your problem. You can try to chek to find errors and format your HARD disk with a third parity tool and try to install windows again.

• Satellite L30: A few questions about the change from Vista to Win XP

  My satellite L30 has Vista Home Basic preinstalled, but I decided that Vista is still a little slow & buggy and would like to change to WinXP Pro. I have 2 questions-

  1. a change to XP will extend the battery performance? (currently 1 h with no wifi I think it's pretty poor)

  2. I intend to reformat the hard drive for all the hidden partitions will be lost. If I decide to go back to Vista, at a later date I will be able to reinstall using the "upgrade" dvd that came with my computer? I think I'm wrong in saying that this dvd contains a full version of Vista, but I wonder if my serial number still working?

  Thank you

  Hello

  If you bought the L30 with Vista operating system preinstalled, then I presume that you have received also the Toshiba Vista recovery CD.
  The Vista on the recovery CD is already enabled and you don't need to enter keys t.

  Regarding your battery question: well as you know the battery working time depends on the use of the laptop. Performance heavy on the laptop running decreases the life of the battery. It is a fact.

  But you assume the Vista needs of more resources for laptop as the XP and the Vista operating system wastes more energy than other operating systems.
  I think if you install XP on the laptop, you should be able to work with the battery a little longer as with Vista.

  Concerning

• Satellite P200D - 12f PSPBQE - Question about the temperature of the CPU/GFX

  Hey guys,.

  Here are the specs of the laptop:
  TOSHIBA Satellite P200D-12F series laptop - AMD processor Turion 64 X 2 TL - 62 2.1 GHz 2 MB of Cache, memory 2048 MB DDR2-667 SO-Dimm (2 x 1024), drive optical drive DVD Super Multi, 250 GB SATA, 5400 obr/min, 17.1 "WXGA + TrueBright High Brightness (1440 x 900 resolution) TFT LCD Display, 10/100 Mbit Ethernet LAN, 802. 11b / g wireless LAN, 56 K Modem, ATI Radeon HD2600 256 MB dedicated graphics card, stereo speakers integrated Harman Kardon, 3,45 kg, Bluetooth, integrated webcam, Microsoft Windows Vista Home Premium Edition, 2 years international warranty

  I can t find any son or sites that define idle temp for this processor and graphics card.
  in normal position and high performance / games.
  I have an extra cooler (link: http://www.mimovrste.com/artikel/2210016012/hladilnik-za-prenosnik-akasa-ak-nbc-02b) under the laptop. It helps us not much, but still it s running * 53 C * (celsius) while surfing internet.

  Without this cooler surroundings 60 C. It seems strange to me.
  When I play games on high performance base temperature goes to * 63 C *, without paste xtra * + 80 c! *

  I clean the heat sinks each month 1 with a huge compressor :)
  I don t let any dust in there. I have the laptop like a year now big runs, but still I m interested in this s the temperature of our similar models.
  I had a few 'disable problems' when I didn t have the additional cooler, but now he runs great, but im still not convinced it s the 'normal' temp : S

  So please help a lost soul, surf the internet finding nothing to answer his question :)

  TNX

  Hi dariod

  You can't find any info on the idle temp for this processor and graphics card because the temperature level is always different.
  The laptop temperature depends on the temperature of the environment, the use of the laptop and power settings.

  In Win Vista, you can change some settings to be able to affect the temperature of the CPU and the cooling module feature:

  Here is a useful link to the FAQ:
  + How to manage Windows Vista power management features.
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  In addition, you must update the BIOS if a new BIOS update is available.

  Greetings

• EM12c, improvement of the system of two - Question about the new repository

  Hi DBA:
  I used the method of two system to upgrade my 11.1 SGD to 12.1.0.2. The upgrade has completed, and is followed by 7 of 42 officers, so I'm still trying to switch these. In the new EM12c, 'Management and Repository Services' page shows the connection descriptor - but it refers to the repository 11.1 SGD database. I'm afraid to ask, but if this should not be the new repository of WHO, that I created as a clone of the repository 11.1 SGD database? I checked my YES screenshot and the node logs; database connection details are accurate to the new database and the old repository. There is no glaring errors of the console EM12c. How do I validate this?
  
  Thank you
  
  Laura Sallwasser

  Hi Laura, support will update your SR with the solution and the first cause. To update this thread, the problem is that you had an agent (10.2.0.5 or 11g) in the box of SGD 12 c before the upgrade. SGD 12 c install also installs an agent on this box, but will not create the target host as target host was already created and controlled by the former agent.
  Travel to an agent will fail if the agent does not monitor the target host. Thus, oracle_emrep target relocation failed and raises questions that customers report.

  We donnt 2-system of support upgarde on the same host (guide says the same thing). Support will help you how to go forward, I explained the steps.
  I connected a bug to see if we can launch a warning in pre-upgarde console earlier.

  Concerning
  Akanksha

• EM12c, improvement of the system of two - Questions about the post-installation steps

  Hi DBA:
  I use two system of EM11.1 process and have updated the SGD. Immediately after the set SGD to level, I went three agents. The agents take on a cluster. I have completed the tasks of post-upgrade deferred Data Migration and the Migration of the accumulated data. Finally, I registered offshore on migration for these three agents and everything seems * fine. My question:
  
  I spent a second set of officers who support another cluster. Is it true that each migrated agent calls for a fresh run of deferred employment data Migration and Migration of the accumulated data?
  
  Thank you
  
  Laura Sallwasser

  Yes, as and when you put agents in batches of the accumulated data Migration task is triggered. To better understand this concept:

  in the approach to upgrade 2-System, you can choose to spend your Management Agents in phases. When a set of Management Agents are passed to the, they start to download data on their hosts and their targets in the improved management repository, while those who are not switched yet, continue to download data from their hosts and the former repository of management targets. Therefore, earlier versions of the Management Agents coexist with those upgraded when only some of them have passed, and in such circumstances, the data are transferred to the former repository of management as well as the other at some point. However, note that a Management Agent only represents a host at some point, so coexistence does not two Agents of management on the same host. It shows only an earlier version of the Management Agent followed by a crowd who cohabits with a upgraded Management Agent, followed by another host.

  When you swtich in the next series of Management Agents in the next phase, although they start to load data into the repository of improved management, the data downloaded to the old management repository before be toggled continue to exist in the repository of the old management.

• Satellite L30-134 PSL33 - Question about the version of the BIOS and the type of DVD writer

  Hello!

  I bought a Toshiba L30-134 PSL33 the week last in Hungary. I recorded to Toshiba international warranty, so I saw that my cell was made the 19.10.2006.
  My friend bought the same laptop (Toshiba L30-134 PSL33) too (also in Hungary), two weeks ago. His machine was made on 19.12.2006.
  It's already funny, but that's not all.
  My laptop has a series number starts with X, and the machine of my friends has this starting with Z. That's ok.
  But here it is...
  I have a BIOS version of 1.3 and my friend has a BIOS version of 1.9! 0.6 gap within two months? Why?
  The other thing. I have a DVD burner called Mat * a UJ - 841 S and my friend has a LG 4082. Once again: why?
  If you are looking for Toshiba BIOS update you don't find anything! It is very interesting. There must be some updates to the BIOS, because I read here to another topis that someone has a BIOS version of 1.4. But there are 1.9 too.
  Each book was brand new when we bought.
  Any idea?
  Let me know when you bought your laptop, what BIOS version it has, and what kind of DVD player there.
  I'm wainting for the answers, because I'm really interested!

  Thank you
  Marcell

  Hey Arnaud!

  I m from Hungary, too, but I think I should speak English on this forum :) So here is my notebook, I ve bought on 24.12.06. :

  Type: L30 - 134 PSL33E
  The machine was made on: 19.12.06
  Series: starts with Z
  DVD player: LG
  BIOS version: 1.9

  You should t be nervous on the drive, the carpet * a Panasonic, and I think that s as good as LG. Why are they different? I put t know, maybe Toshiba was such at the time. In the specifications I didn't seen anything on the drive type, so I think that s not relevant. I t has not found another version of BIOS for this model, so I t understand too why and what are the differences between the versions. But if you n t have a problem with your machine, you do not need to change the BIOS. This isn't a PC, if you haven t many options to change in the BIOS.
  If you want to discuss on the laptop on the Hungarian language, I recommend the Toshiba section on www.prohardver.hu.

  Best regards
  Abel