Satellite A200-1FL randomly turns off

Hello

I have the problem that after I moved from the Spain to the Thailand now my Toshiba Satellite A200-1FL randomly turns off.
This only seems to happen when it is connected with AC - with battery I have it is not happened again although I can't rule out it.

After some time of work (sometimes only 10 minutes, sometimes up to 2 hours) the laptop just shuts off-as if I would unplug the unit without the battery inserted. It is certainly not an overheating problem because the CPU is at 55º c most of the time (a year before the cpu fan was dirty and he has sometimes increased to 90º - but which caused no stops).

I don't know about electricity here in Thailand - but it seems 220V and they do not use the Earth (at least at the point where I am).
I use the original Toshiba AC adapter.

What could be the problem here - is there any solution or the solution to this problem?

Thanks for any help,
vitaminx

Hey,.

As stone I n not know electricity of the Spain and Thailand, but if you have only this problem with the AC adapter / CC, there are a few differences between the Spain and the Thailand.

In your case, I will ask the local authorized maintainer in Thailand. For example just give them a call and ask a technician for help. I'm pretty sure, they can give you an answer if you need a new power supply or another outlet.

Good luck! :)

Tags: Toshiba

Similar Questions

  • Re: Satellite A200 - overheats and turns off

    Hello

    I had a problem with my A200 series. It heats up to something like 40 ° - 50 ° C, what should I do?

    I rarely hear the fan inside, I seldom spend my laptop off aswell

    Please help me; thx a lot

    Hi kerplunk36,

    I put t know how you checked temperature internal 40-50 ° C, but if this would be the case, everything is ok. That s pretty good temperature and normally nothing should be overheating or turn off.

    Right now I can recommend Notepad using compressed air cleaning spray. This could blow in the form of dust fans cooling and, therefore, it of not necessary to disassemble the laptop. As you can see is a very easy and fast way to clean.

    Check this box!

  • Satellite A200-1AH will turn off by itself

    My computer closes itself sometimes without any reason! (and then when I try to open it a few seconds later it closes!)
    Can someone help me what is the problem? =(

    Thank you...

    Hello

    Have you read this forum and other discussions concerning similar behavior for laptop?
    There is enough discussion on these issues, and in most cases, it s related to the temperature inside the laptop.

    This can happen if don t cooling modules run with maximum efficiency and the vents are clogged with dust.
    You can try to remove the dust of ventilation with the can of compressed air.
    This spray can be purchased from various online retailers.

    welcome them

  • Satellite A200-1FL: problem installing Bluetooth on Windows 7

    Hello world

    I have a Toshiba Satellite A200 1FL (PSAE6E) with Windows Vista and I just installed Windows 7 32 bit (no update or upgrade).

    The problem is that when I try to install the bluetooth stack, it installs all ok, but the driver.
    I took the version 7.10.12 for Windows 7 32 bit from http://aps2.toshiba-tro.de/bluetooth/?page=download.

    The driver installation window presents itself and the progress bar does not move.
    I waited for a long time and nothing, no response, so I have to cancel.

    However, the software has been installed and when I try to start Bluetooth config or any other tool, the same phenomenon occurs: the driver installation window shows upward and nothing.

    Also, I tried to follow the installation instructions of command since the drivers toshiba download page guess what drivers are each options.

    Can someone knows why this phenomenon occurs?
    Am I missing something or is there a known issue with the Bluetooth in Windows 7 driver?

    Thanks in advance,

    Jorge

    Hello

    On my A500 during installation Bluetooth driver, he invites me to activate the Wlan switch. I don't know if A200 is equipped with WiFi switch. If this is the case, turn it on and try to install. I have more no other suggestion.

  • My Satellite Pro M70 itself turns off in the middle of the secuence of startup

    My Satellite Pro M70 itself turns off in the middle of the secuence of startup

    After turning on if it passes the test post and enters the menu grub (Linux + Windows) or BIOS
    without problems, but most of the time after the start of the BONE found in the start - up, suddenly it powers off the power.

    The problem becomes bigger and bigger as punishment I can boot any operating system

    As seen on messages more soon as I cleaned the vents of CPU with a spray suddenly sure I wasn't a problem of overheatting.

    Someone has an idea of what can happen?

    Thank you

    Hmm, the laptop passes the MESSAGE correctly and it stops during the initialization of the operating system. Is this good?

    Well, in this case I would exclude the RAM to malfunction.

    I put t also think that it's an overheating problem because the laptop should work a little longer until it would be closed due to high temperature.

    What about the HARD drive malfunction? Are you sure that the HARD drive is ok?

    In my opinion, you should check the HDD and maybe try another.

    Welcome them

  • iPad 2 iOS 9.2.1 WIFI randomly turns off by itself

    iPad 2 iOS 9.2.1 WIFI randomly turns off by itself. What can I do to fix?

    the ITI is probably just the wifi in your House and not iOS

  • Satellite A200-1FL (PSAE6), ATI Mobility Radeon HD2400 and WXP

    Hello

    I have a Satellite A200-1FL (PSAE6), anyone know if it really works algun driver for ATI Mobility Radeon HD2400 with XP. Since I proved (I tried) a bunch of drivers and no work included the fact that adds Toshiba in his (her, your) official release page Display Driver of Ati 8.383.1.1000, thank you.

    From time to time, I think you should check the page European driver of Toshiba.
    To my knowledge, unique drivers are downloaded and out very often.

    You can also take a look on Toshiba Canada website. You can also find some useful graphics drivers!

    Finally the www.omegadrivers.net site is very useful and the GPU driver from this page works on my laptop.

    concerning

  • Portege M400 randomly turn off and restart

    Hello
    I was wondering if anyone has any suggestions on what's wrong with my laptop? Two days ago began to randomly turn off and restart. I checked the following:
    -Execution control online Panda Security virus etc - all ok.
    -Check the system of newspapers but all it records is an error "windows has stopped unexpectedly".
    -Suspect an overheating problem I took it to pieces, clean all the dust from the fan and the heat exchanger. Also cleaned up all the old thermal paste off the CPU and replaced with new ones. It works now much cooler but always stops at random.
    -Run a Suse Linux Live DVD to check, it certainly isn't a problem with the OS and it stops again.

    I'm guessing that something is short circuit on the motherboard because it will run ok if it is on a flat surface and not moved and I do not press too hard while typing etc. However, it is a bit hit and Miss. If someone has had this problem before and there at - it something else I could try? Also any ideas on is how a new motherboard? I expect probably expensive :( If there is any kind of fix I can do myself? I'm pretty technically minded and do not have a problem with taking it bit do not know much about electronics, engines are more my thing :D

    TIA, Firedrake

    PS The laptop model number is PPM40E running Vista Business.

    Hello!

    I m not an expert in laptop but in my opinion, it sounds like a hardware malfunction. The reason could be a faulty motherboard or something else.
    I mean you already tried Linux bootable disk, so I think that the problem is not bound by the OS.

    I put t know how much a new card mother cost and if it s difficult to Exchange or not, but you should contact the nearest ASP that you can find on the Toshiba site. The laptop technicians can check your laptop and order a new card of mother.
    http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

    Good bye

  • Satellite A200-1FL: where can I get all the drivers XP and SATA HDD

    Where I can get the controller to sata drives so that it (he, she) can load Xp in Satellite A200-1FL.

    And another serious issue that when available have all the drivers for this model is only it (he, she) has 2 just now in the Journal official page that they are one of the graphics card and wireless. Because I need them for work reasons.

    Thank you

    Hello

    Maybe this topic can help you http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=26040

    Download the drivers, you can find on Toshiba page under http://eu.computers.toshiba-europe.com > support & downloads. Choose the right model A200. In your case, it must be PSAE6. Am I wrong?

    Good bye

  • Need drivers of Windows XP Home for my Satellite A200-1FL

    I would like to know if I can use all the drivers for the Satellite A200-1FL for Windows XP Home edition, because I need to install Windows XP Home edition on my laptop as soon as possible.

    I can't find any of them on the Toshiba download page.

    Of course, you can install XP on your laptop.
    The question is only; If you will be able to use all the features of Toshiba.

    Well, I read only on the key issue of the FN after installing XP. But everything else must run and function properly.

    Satellite A200-1FL belongs to the PSAE6 series. You should choose this series if you want to download and install all the XP drivers.

    Best regards

  • Satellite A200-1FL - how to choose compatible Kingston memory modul

    I want to upgrade my laptop Satellite A200-1FL to 4 GB of RAM.
    Now, he has two modules, each 1 GB 667 MHz.

    I read that memory modules Kingston are not suitable for computers laptop toshiba. Is there any table
    to match a computer model toshiba laptop specific to a specific module of kingston?

    I know, there are a few parameters to be taken into consideration, as frecquency 667 MHz or 800 Mhz, CL4 CL5 or CL6...

    Thank you for all the advice

    Hello

    You should buy a DDR2 667 MHz (PC2-5300) 200 - PIN SODIMM modules:

    Usually he s not what module manufacturer, it is of importance, but Kingston modules are ok.
    I upgraded my laptop's memory and used the Kingston modules too

    I got m

  • Need drivers XP for Satellite A200-1FL

    I bought A200-1FL, but I need to install XP, because a I use software that needs XP... When can I get all the XP drivers? If I won´t get i´d xp drivers need to change laptop...
    Please I need answer.

    Thank you.

    You need the answer? He's here!

    Satellite A200-1FL seems to belong to the PSAE6 series.
    If you need the XP drivers for laptop you, that you should look for XP compatible drivers for the series mentioned.

    On the European driver Toshiba page, you will find XP drivers:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    If some drivers are not available, you can try to use another A200 series XP drivers!

    Notes; It may happen that you will not be able to use all functions of the laptop as the FN keys it is to say the Toshiba Utilities missing or is not available for XP or because the BIOS is not compatible.

  • Satellite A200-1FL asks for the password after the BIOS update

    Please answer who knows what to do.
    I have laptop SATELLITE A200-1Fl (PSAE6E).
    After the installation of update of the Bios (v1.7 12/10/2007 for x 64) my pc started to ask the password, I have never installed.

    I'm to tosh. out of warranty service center-useless.

    Hello

    Satellite A200's newest model of laptop and I can't believe as possible out of warranty. Please try to contact a few different FSA in your country. It should be clear somehow. If nothing is done please post again.

  • Satellite P300 - randomly turns off the power when connected to the external monitor

    Hello

    I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

    Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

    I think it has something to do with the LED screen because my computer was never off his own.

    Hello

    So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

    If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    You close the lid if you have connected the external monitor?
    What operating system do you use?

    In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

    Good bye

  • Satellite Pro A30 is randomly turn off

    Hello

    I have a Satellite Pro A30 and from time to time it just turn off. It happens to any application that I use. It will then restart and on my desk, I will get the message that my Active Desktop was stopped unexpectedly and asks if I would like to turn it back on. I noticed that it does appear that this operation when the power supply is connected.

    I can't be sure if it happened only when he has worked outside the network, but I'm starting to think it is. The charger seems to work fine though as it loads fine and power mode changes when it is plugged.

    Any help anyone can give would be greatly appreciated,

    Thanks in advance,

    Babin

    Satellite Pro A30 is quite old and probably you have not cleaned up until now. If the unit tips suddenly OFF, independent, running application it may be due to overheating.

    It is possible the unit turns off often when it is connected to the power running, because in this case, the standard profile in power management is full power. Power supply battery, CPU activity will solve automatically on the lower level and maybe you can do a little bit more.

    In any case, I recommend you to clean the unit and remove the dust. You can try to do this alone, but I recommend doing it on the professional way but you can make a decision how to proceed.

Maybe you are looking for

  • What App would you recommend to run virtual machines on an Imac?

    I would try to have virtual machines running on my IMac, but I'm having a hard time finding any material on this topic from apple. Ideally, I would like to my main x os to start and then simply turn a small virtual machines or containers from OSX. An

  • Is it possible to bookmark all tabs in a folder at a time?

    I love the previous session 'restore' in history, but 1) sometimes I forget until I've already opened a new session. and (2) sometimes I have a couple of value of the windows of the tabs on different subjects. It would be good to have a command to bo

  • 'Cut' is removing style / format as well as cell content - I'm not what he

    Hello It seems that a setting changed in my numbers (3.6.1). When I select a cell or range of cells and cut, the formatting / style also disappears. It does not use to do... Help! Thank you.

  • How to remove some virtual drives of portable Satellite

    MY TOSHIBA HAS A LOT OF VIRTUAL DRIVES, THAT IT LEAVES ONLY 1 FREE SPACE TO PLUG A USB BACKUP DEVICE. I CAN'T SEEM TO RECORD INFORMATION TO ONE OF THESE READERS, NO MATTER WHAT I TRY! HOW CAN I GET RID OF ALL OR PART OF THESE READERS VIRTUAL SO-CALLE

  • Vision Builder - error creating LabVIEW Code

    Hello! I use Vision Builder 3.5 and LabVIEW 8.5.1. Vision Development module is also installed. I've built several routines inspection with the Vision Builder. Then I tried to create .vi-files. Then I hit tools-> Inspection migrating to LabVIEW... In