Satellite A200 - error message on Bule screen when I do something hard

Similar Questions

• On Satellite A200 error message: could not open the ACPI ATK0100 Kernel Mode driver

  Hello

  I have laptop Satellite A200
  When I run the windows (vista) I get the following error: * 'Can t open ACPI ATK0100 Kernel Mode Driver.*'!
  I installed all the drivers and the error remains.
  I installed all the drivers on the Toshiba site, but the problem persists.
  The Device Manager shows me that each device is working properly.

  Someone at - it a solution?

  Thank you

  ACPI is the installation of your Windows operating system power management. If this fails you may need to run a recovery system on your computer. You can do this with the hidden partition on your hard drive, but this will erase all data on your machine. If this does not resolve the problem, you may consider making your hard drive, checked bad sectors, as this may have failed.

  I hope this helps. :)

• Satellite A60: error messages on blue screen appears all the time

  Hello

  I had a Toshiba A60 satellite for awhile. It has been great so far, but I'm constantly getting blue screens of death, with millions of stop error different etc, I have read everywhere and updated to the latest BIOS, but still no luck.

  I don't know what to do, he gets the errors blue screen randomly, sometimes, the laptop can last an hour or two, then sometimes it shuts down quickly, please help me as soon as POSSIBLE.

  Thanks in advance.

  ~ Icesolar

  Hi Icesolar

  According to me, you know that there is no magic solution for BSOD problems. As far as I know, it happens more often because of pre-installed software. On my camera, I got only 3 times and always after installation of some third-party applications.

  Have you noticed something similar? BSOD is started after you install an application? Try to delete the most recent pre-installed software, or restore the system to an earlier time before BSOD begins to appear.

• Satellite A200: error message - system requirements to install the software

  There is another problem.
  I tried to install it but it shows error:
  ´This computer does not meet a minimum required for the installation of the software. Setup will close. ´

  Can you please tell me why.
  I have already installed new BIOS and the operating system is Vista.

  Vista needs of more computer resources as another Windows operating system.
  Perhaps the OS needs all the resources of the computer such as RAM, etc... and therefore impossible to install 3rd party software.

• Satellite A200 - error when using fingerprint code

  Hello

  I have the Satellite A200 with Windows vista 32-bit, when I try to log in through the finger scan, I got the massage (error code oxe 7210001 (an internal error has occurred (shared: encrypt cryptopp(StreamTransformationFilter: invalid PKCS #7 block padding found)).))

  Can someone help me?

  Thank you

  Hello

  I m not an expert with this tool of fingerprints, but I noticed here in the forum that the relocation of the fingerprint software could help get rid of this problem.

  According to the Web of Toshiba site, the new fingerprint software is version 5.8.0.4024.
  You have installed? Otherwise reinstall the software of fingerprint and test it again.

• Need to solve an Error Message 7B - blue screen of death/boot loop

  Hey community,.

  I need help. I'll try to find a way to resolve the error message on blue screen 7 b on a laptop HP Compaq 6710 b using XP, but he took trapped in a loop of boot BSOD and I can't access the command prompt to try to fix it. The situation is further complicated by the fact that the laptop has never been saved, and there is no XP discs for me to reinstall from.

  Wipe the drive and starting over is not a huge loss, but I need instructions on how to do that, without being able to use the last good config or the factory restore to XP disks.

  I'm sure that this information is on the internet somewhere, but the search engines sent me on a wild goose chase and I really hope I can solve this problem myself. I've only worked with Vista and need guidance on this.

  If anyone knows what to do, Please HELP! Good karma coming your way!

  Thank you

  Sryan2930

  Usually, I get this error when you try to transfer a hard drive from one pc to another, or after replacing a motherboard. The problem is probably the chipset/mass storage drivers.
  I had limited success by starting in safe mode and (re) install the drivers downloaded from the manufacturer's website.
  Here is the link to help you: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3356622&taskId=135&prodTypeId=321957&prodSeriesId=3356620&lang=en&cc=us

  I hope I helped!
  Brian

• Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Help! I get the error message 0 x 80190194 when I try to enable Windows Update in Windows XP Professional

  Current solution: download IE8 for XP, run who, follow the Setup Wizard, wait for his failure. Download manually upgrade restart, recommended.

  Restart the installation of IE8, wait that he remove previous IE. Reset.

  Installation of IE8 restart to restart. Let it run. May need to restart.

  Try to run windows update again. IF it works, woot, otherwise download the SP3 of XP service pack from Microsoft. As the Windows update fails, you must not download an installer, but an ISO standard. Burn the ISO to a CD and install (way to go...) or download a free tool like 7Zip and unpack iso and install a go from there.

  From there on, the installation of SP3 and hope this works...

• After the connection to my computer today and to go to YouTube, I get this error message on my screen: "Microsoft Visual C++ Runtime Library error - failure of the Assertion.

  After the connection to my computer today and to go to Youtube, I get this error message on my screen.

  The assertion failed!

  Program:...
  File: common\npn_gate.ccp
  Online: 267

  Expression: pPluginShim

  I try to press abandonment and try again but nothing happen.

  Hi Shadwik,

  Thanks for the reply.
  I did as you said. It has been effective. But only to play the first video clip on youtube. With the next video, the error appeared again. I looked at the programs and saw the customer to be automatically updated to 11.3 flash...
  After that I tried to read a music video by realplajer and who has a problem too. by seeking out them in true originator, I founded there a conflict with the 1.3 flash payer... and disabling the Web download & recording of Realplayer was the solution finally.
  After that my PC works fine.

• Satellite A200-1AE (PSAECE) Vista has detected a problem with the HARD drive

  I have problem with my mass storage device, or else I think it's this feature that I get this error message when I start my computer [(photo de Massage de l'erreur) | http://img513.imageshack.us/img513/1059/errorxd5.jpg] and I think it has something to do with that [(Image in Link) | http://img132.imageshack.us/img132/2703/divicemanagerax9.jpg]

  I don't know which driver download for this problem.
  If anyone can help it will be much appreciated. I am running windows Vista x 86.

  Hope helped photos

  Hello

  The first error message said nothing; He only says that something is wrong on the HARD drive.
  Why you n t pres the button Don t ask me once again this problem?
  It seems the message again using this option?

  On the second picture, I see that your Intel Matrix Storage Manager has not been installed on your Vista 64 bit OS.

  On the European driver Toshiba page, you will find the 64 bit Vista drivers. Please download the Intel Robson Package from this site and install it. Robson package includes Intel Matrix Storage Management Utility for the management of your local storage space.

  Check it!

• Error message incorrect file size when the BIOS update on Satellite M100

  When you try to install the BIOS update I get the error message: incorrect size of the ROM file. What can I do? Thank you.

  Hello

  Today is your lucky day dude. Seems I found a solution :D
  Pelase take a look at this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19974&MessageID=73284

  The user JayJay has provided a link to the Toshiba document that helps to clear this issue.

  It is the original document;
  http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

  Please try it and post if it was the key or not. Good luck

• Satellite A200 - error when running Recovery Wizard

  Hi all

  I'm having a problem on the wizard of recovery on my laptop A200 (OS: Vista).

  I have an error message - "error: Create Partition 08-104 b - 0000 failed. I tried all the solutions provide the FAQ page or "how to". Like http://www.mytoshiba.com.au/support/items/how-to/230, http://www.mytoshiba.com.au/support/items/how-to/95, http://www.mytoshiba.com.au/support/items/faq/71.

  I have a copy of the DVD of recovery with me, but I just keep the above error.
  Please provide any possible solution.

  Thank you very much.

  Kind regards
  Alex

  Hello

  It seems that something goes wrong with the partitions on the HARD disk.
  I recommend to use a MS Windows XP disk or other bootable disk and format the HARD disk first!
  After that, you can use the recovery again disc to reinstall the operating system on this laptop.

  Welcome them

• Satellite A200: Error recovery - file Preinst.swm error: F3-F000-0008

  Hello.

  I'm really not good at computers and things, but I'll try my best to describe the error in my laptop:

  I have a Satellite A200 (with Vista), I bought about 4 months ago here in Australia. There a virus last week, so I made the recovery disc on 2 new blank DVDs using the recovery disk creator and creation process went smoothly without glitches.

  All right then, I ran the recovery disc in what, in my view, is called the start menu? Anyway, after a few minutes I kept getting an error message that has something to do with 'Preinst.swm file. After a couple of times of clicking 'continue' and see this same error message by clicking 'ignore' and running the 2nd DVD, an error message "error: F3-F000-0008". "»

  Now I assume that the error preinst.swm is due probably to a scratch in the recovery disc, or some fault in the DVD that I used and not with the portable reality itself. I just need confirmation you guys on this subject.

  I guess the best way to go is just to have an another Vista recovery disk (from the store, I bought the laptop from) then? Or y at - it another way to solve this problem I can do before I leave to the experts? I use this laptop for work so really - no laptop, no work!

  Thanks in advance.

  Really not easy to say why the restore procedure does not work.
  But for me, one thing is clear.
  If you have 2 recovery DVDs, you must always start the first!
  If you start bad DVD, you will always get an error message.

  To my knowledge the laptops computers Toshiba for the European market are delivered with all necessary CDs/DVDs and the recovery media is still in the package.
  I put t know why Toshiba Australian didn't send the DVD of recovery as well as the laptop. Perhaps the recovery DVDs are simply available, and they offer only an option for the creation of a collection. Who knows...

  However, it is s try to contact the service provider allowed in your country and ask if you can order a new CD from recovery for you laptop.

  Good luck and best regards

• Satellite A305 - error message keep appearing from

  Hello, I have a Satellite A305-S6857 laptop
  A few days ago to XP downgrade Vista. It worked well but suddenly yesterday when I restart windows,.

  * the system has recovered from a mistake of the serosa

  A log of this error has been created

  For more information about this error, click here * so I clicked and it said

  error signature
  BCCode: 1000007e BCP1: C0000005 BCP2: BA430F76 BCP3: BA513C94
  BCP4: BA513990 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  So I simply ignored, did cancel but it keep poping up and I made reports but it did not work either.
  So I restart again but still the same. Every time I have restart this pop-up.

  So I googled on this topic and I've done something and I think after I did uninstall and reinstall a driver GMA an another error message too. It says * the Publisher could not be verified. are you sure you want to run this software? * and I say yes, he shows me another one same thing 3times.

  It's really annoying and after that I got a few messages pop up, my computer has become slow and sometimes it stopped

  help me guys...

  > He says that the Publisher could not be verified. are you sure you want to run this software?
  Maybe something wrong with the graphics card driver or other software which is not certified by Microsoft

  Did you use some third-party software, tools and 3rd applications?
  Have you installed the drivers from Toshiba or other websites of third 3rd page?

  Check the msconfig-> Start up tab and take a look at the list of background processes.
  If there are some applications that are not known to you, then turn it off.

  In the worst cases, you need to reinstall the OS.

• Satellite L40 - error message during the installation of value-added package

  Hello

  yesterday I installed Windows 7 Professional 32 bit on my Toshiba Satellite L40 PSL40E, everything works fine except the volume on FN + arrow keys/esc control.

  I tried to install all of the packages available to fix the problem, but I can't install the VAP. Every time as I try, I get this error message: error installing PVAT [0x8146045B].
  I ran as administrator and also tried compatibility mode.

  Help please, thx!
  Constantin

  Hello

  Before that you can use the FN keys and other special functions that you need to install Toshiba Value added Package.
  My question is: have you downloaded the package of value added for Satellite L40 (PSL40E) and Windows 7 32 bit? It s is already available for the new Windows 7:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You have installed the drivers first? They must be installed first normally, e. g. chipset, screen, sound, LAN driver, etc.

• Satellite A200 - with connected power supply screen goes black or partial

  I have a satellite A200 age of 5 years.

  The laptop works fine when using the power of the battery when the AC power cable is plugged into the computer freezes sometimes displaying a partial color screen or a black screen. I tried with my son AC cord (also Toshiba) and same problem appears.
  Any help would be greatly appreciated, very frustrating.

  Regards Dave.

  It is not easy to help in issues that sometimes occur.
  Have you done something about this? Something like test with its own OS preinstalled?

  On this virtual path, it is not easy to say what may be the problem. It can be caused by software, but also the material can be responsible for this.
  In my opinion, you should backup all your data and reinstall original Vista and test it with the factory settings.

  If the problem occurs again you must be a hardware problem.