Need to solve an Error Message 7B - blue screen of death/boot loop

Similar Questions

• Satellite A60: error messages on blue screen appears all the time

  Hello

  I had a Toshiba A60 satellite for awhile. It has been great so far, but I'm constantly getting blue screens of death, with millions of stop error different etc, I have read everywhere and updated to the latest BIOS, but still no luck.

  I don't know what to do, he gets the errors blue screen randomly, sometimes, the laptop can last an hour or two, then sometimes it shuts down quickly, please help me as soon as POSSIBLE.

  Thanks in advance.

  ~ Icesolar

  Hi Icesolar

  According to me, you know that there is no magic solution for BSOD problems. As far as I know, it happens more often because of pre-installed software. On my camera, I got only 3 times and always after installation of some third-party applications.

  Have you noticed something similar? BSOD is started after you install an application? Try to delete the most recent pre-installed software, or restore the system to an earlier time before BSOD begins to appear.

• Stop error message XP blue screen 0 x 0024

  Hi cybertek,.

  OK, I followed it all through, but my situation is slightly different. All I can get to is the start, regardless of menu if I use a bootable cd (I tried the method of PE Builder) or the original Windows disc. no safe mode or anything. I run Hard Drive Diagnostics in the Boot Device Menu, which gived me fail - Return code: 7 on my Samsung hard drive message. My only alternative to try and get my files on the hard drive from another PC or is there other alternatives? I also have a selection of ' boot of the score of "available in the menu boot device if it can be used somehow

  Not, in my opinion. I try and retrieve files as soon as possible as described previously. Chkdsk /f is infamous for the loss of data on the fault of readers (and sometimes OK ones) so I'm not messing around with it until you try to get your data. MS - MVP - Elephant Boy computers - don't panic!

• Help me solve the mystery of The Blue Screen of Death BSOD

  I have a user who knows to randomly BSOD errors.

  After reading another post I have collected the minidump, the msinfo file and config of Dell.   I hope this is the right place to ask these files for further assistance with this issue.  Can you read through these and help me understand what is causing this problem?

  Link to the above mentioned files.

  https://drive.Google.com/folderview?ID=0Bz7KXOfhWjvvY0ZSLUN5VmtwbmM&USP=sharing

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  2-Memtest. (You can learn more about running memtest here)

• HP Photsmart C7280 - flashing lights and error messages on blue when screen off the printer.

  HP Photosmart C7280 All in One.

  This 3 year printer seemed to install OK when I it connected via a wireless modem/router.

  My turn and Lap Top printed ok for months. They use Windows 7 64-bit.

  Recently when the printer was left off for a few days all its lights started to blink.

  If I disconnect and reconnect it the power and cable modem/router, the printer works ok again until it is turned off.

  The lights will start to Flash.  Also, I'm getting 2 error messages on blue screen when the power is off and the lights are flashing...

  B8SIFE84 blue screen error code still appears, and once I saw the blue screen B3772734 error code appear as well.

  I deleted and reinstalled the device by using the printer software HP correct and downloaded and installed all the relevant printer updates that I can find. The problem still persists.

  Help, ideas or thoughts to the subject of what to do to solve this problem would be appreciated.

  Don't

  Have sussed out.
  Power supply is 'blacktus cactorum cactus. "
  It is unclear when it is off.
  Looks like this is a new printer for "don't" then buy HP shares and buy a 5 year warranty with the new printer.

• [SOLVED] ATI HD series random blue screen error: error 0x0000007e ntoskrnl kb965494

  [Problems]

  Fixes random maps of BSOD blue screen of death ATI HD Series - spontaneous different random BSOD error codes every time

  Solves problems with his SoundBlaster X - FI (on board and add the map) extreme gamer - Sound sound seriously jerky or cut sharply off the coast

  Solves delays random system - system shuts down randomly for no apparent reason
  Solves the problems of disconnected Steam - quite noticeable in Call of Duty 4 Modern Warfare 2
  Resolved A of Call of Duty 4 Modern Warfare 2 in delays play random or falling of the game so that your game. Usually, when first start the game. Not having not NAT enable may cause a similar delay as well.
  [Source of problem]
  The problem is with an older driver a new loading equipment when you first load the operating system from Microsoft. Shame on you, Microsoft.  6 weeks to understand it and it is CLEARLY without Microsoft. Sorry, but none of the NDA here.
  Its a simple problem, yet almost impossible to find. Catalyst install Manager - ATI HDMI Audio Device will add an Audio device rather than to replace the device driver Audio HDMI Microsoft load the OS installation stage. Or the pilot is ignored all together because Microsoft has already loaded a driver installation for this device.
  [Clean Install FIX]
  When you install the ATI Catalyst 10.6, use the custom installation and exclude the HDMI Audio by unchecking the box next to the HDMI Audio. Pilots still end upward in the ATI Catalyst install directory if you can note the ATI installation path. The problem is that ATI will add an HDMI high definition audio device, DOES not replace the Windows device already loaded. Or may not charge a second device. Whatever it is, it uses the Microsoft device driver.
  Updated driver software with the driver - Microsoft high definition Audio Device driver ATI manually following the instructions below.
  [Windows OS already loaded FIX]
  -Device Manager-
  Manage driver updated using computer-> right click-> appliances-> sound-> right click HDMI high definition Audio Device-> update driver and browse to the directory of ATI (check include subfolders).
  Also noticed the BIOS default settings cause problems of NB and DRAM. Overclocked to mount pressure on the system. Even if I adjusted the settings of the BIOS, I have always many BSOD until I updated the driver for high definition Audio Device from Microsoft with the ATI driver.
  Ubuntu ran without a single question before changes to accommodate the Windows 7 operating system. For some reason any Windows is picky about certain parameters so that Ubuntu 10.04 LTS loads and runs without a single problem.
  I have the logs memory.dmp and mini.dmp. Any help and any help appreciated :D
  After running through the following steps, the problem here is the ntoskrnl.exe causing several bugs (BSODS). Even if it's a problem with Vista, this problem occurs with Windows 7.
  • Event ID: 1001 Source: error checking
    The computer was restarted after a bugcheck.  The bugcheck was: 0x0000007e (0xffffffffc0000005, 0xfffff88000e34294, 0xfffff880031bda18, 0xfffff880031bd280). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052310-17316-01.

    The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000109 (0xb3b7465eeb217b7e, 0xfffff80002d18cc0, 0xa3a039d898a4a950, 0 x 0000000000000001). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 052110-23197-01.

  OS: Microsoft Windows 7 Ultimate 64 bit
  Antivirus: Microsoft Windows Security Essentials
  Motherboard: Gigabyte GA-890FXA-UD5
  RAM: 8 GB CORSAIR DDR3 4 GB 1333 MHz CORSAIR TW3X4G1333C9A TWIN

  Video: Diamond ATI Radeon HD5850 1 GB DDR5

  PROCESSOR: AMD X 4 965BE
  HD: Hitachi 1 TB HDE721010SLA330 S/N MS03G16K
  PS: Antec EarthWatt 750W PSU V2.3
  KB: Logitech G15
  Mouse: Razer Deathadder 3.5 G
  Gamepad: Belkin n52te
  First try to solve this problem:
  Fresh OS loaded and BSOD immediately after the restart. Reason or details is unknown because of the immediate reboot without a kernel image. No events logged in Windows event logs with error checking information.
  At ran Windows Update for the current patches. Random BSOD on restart.
  Load the ATI Catalyst 10.4 Suite for Windows 7 (64-bit). Random BSOD on restart.
  Problem again when the system is stopped and started. Chances are THAT BSOD will occur without emptying the core or the mini writing.
  Run the checker - 90% chance of BSOD
  Ran Check Disk - seems to be stuck on stage 4 'verification data file' 57531 63472 processed files. 01:05: PM 05/21/2010 FAIL stopped here 13:44

  Second attempt to solve this problem (low-level format):

  Using Hitachi tools - http://www.hitachigst.com/hdd/support/download.htm Drive Fitness Test - Switch BIOS from AHCI to IDE to access the SATA drive.
  Quick Test results - HDE721010SLA330 successfully completed / Disposition Code = 0x00
  Clear the result of the boot record - 0x00
  Wipe the drive (drive clean takes time for 1 to ~3.5 hours) / 17:07 Media Analysis / 20:20 hours of fact and change the outcome - success 0x00
  
  
  Updated the BIOS with F2 14/05/2010 (CPU compatibility improve)
  Press DELETE to enter BIOS F8 to enter the Q - Flash insert USB Thumb Drive (a drive if no floppy is in system) select the file
  Change the BIOS settings-
  Integrated Peripherals-
  OnChip SATA Type [Native IDE] change on [AHCI]
  (No Option for this) F6 for drivers to be loaded in Pre-os Windows 7 64 bit

  Install Windows 7 Ultimate 64 bit at 21:02 / Installer Reboot 21:14 / end of installation restart 21:18 / finalised result 21:21 - GOOD

  Install the driver USB 3.0 NEC 21:22 - result - GOOD
  Automatic update added KB978601 (pending reboot) and KB979309 - result - GOOD

  Install the network drivers Realtek Lan_win7 - result - GOOD

  Install win7_chipset (installed ATI Catalyst install manager 03.00.0765) 21:30 - result - BSOD KERNEL DUMP RENOWNED MEMORY. DPM at 5212010935PMMEMORY. DMP

  Hitachi configured disk requires reboot (stop for cold start) - 21:37 - result - connected

  Install Microsoft Windows Security Essentials 64 bits 21:43 d/l latest and scan / to 21:49 results - GOOD

  Shutdown - 21:51

  Power - result - GOOD

  Install ATI 10-4_vista64_win7_64_dd_ccc_wdm_enu (taken from the site of AMD ATI) start 21:59 / 22:01 need to restart (close) - result - GOOD

  Windows Installer wants to make changes - C:\window\SysWOW64\msiexec.exe/x {72736F5F-520 d - 472-A - 88 - 7 B 0 ERRRR it went away on its own.} Closing - 22:05 /qn REBOOT = really delete<---- came="" up="" again="" after="" cold="" start.="" think="" it="" had="" something="" to="" do="" with="" ati="" registration="" window.="">

  Install Google Chrome - result - GOOD

  Install Fusion - 2.0.1.117

  Install AMD OverDrive 3.2.1.0439 utility - Enable AMD Smart profiles -.

  Shutdown

  Power - result - GOOD

  Install the G15 - result - GOOD

  Install Windows Ventrilo 3.0.5 x 64-GOOD

  Install the Steam Client

  Install COD4MW2

  Change the settings to save energy for the computer to never sleep.
  22/05/2010
  Install gtalk, gApps
  Up to 08:57 05/22/2010 BSOD Mini dump.
  
  Dmp kernel that is renamed to 5222010857AMMEMORY. DMP

  BSOD more 2s on 2 days.

  Hello

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
  Troubleshoot the BlueScreens - top two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ===========================================

  The material is highly suspect!

  Since you reformatted and reloaded Windows this indicates that the problem is either material or a
  very basic pilot who has been reloaded - video/display, network/WiFi, sound, possibly 3rd party
  mouse or keyboard, BIOS, chipset and other low level drivers.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  ------------------------------------------------

  Even if you have some of these here tried a fairly complete convenience store just in case.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directoryInc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the/nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with theSwitch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -----------------------------------------------------

  BCCode: 109 0 x 00000109

  Cause

  There are generally three different causes for this bug check:

  1. A driver has deliberately or inadvertently modified kernel of criticism or data code. Microsoft Windows Server 2003 with Service Pack 1 (SP1) and later versions of Windows for computers x 64 do not allow the kernel to be debugged, except through authorized hot patches from Microsoft. For more information, see policy patch for x 64 systems.

  2. A developer tried to set a normal kernel breakpoint using a kernel debugger which was not attached when the system is started. Normal breakpoints (bp) can be defined only if the debugger is attached to the start time. Processor breakpoints (ba) can be defined at any time.

  3. A physical corruption has occurred. For example, the kernel code or data could are stored in memory has failed.

  BCCode: 109 0 x 00000109<-- read="">
  * 1262.html http://www.faultwire.com/solutions-fatal_error/modification-of-System-Code-or-a-Critical-Data-0x00000109-

  --------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Whenever I start my computer, I get the blue screen of death. I'm not getting in what concerns the opening of session and there is no prompt to start in safe mode. Whenever I start my computer the error code and message on blue screen are different.

  I have Windows Vista Home Premium. I was on the internet when my computer screen turned blue and a message told me that a problem has been detected and Windows has been shut down. He said that I had tried to do something with memory executable not executable (I don't have a note of the code). He said as he poured out memory. Now, whenever I start, the blue screen of death gives me different messages and different error codes. Today, he says:

  IRQL_NOT_LESS_OR_EQUAL

  and codes of error STOP: 0x0000000A (0x0000001B, 0 x 00000600, 0x810A90B0, 0x00000001).

  PC World say that they need to reinstall Windows, but I have some really really important files on there that I have not supported (I know, really stupid on my part) and they said they cannot guarantee their recovery. Is there another way to fix it?

  I've been on the forums and suggestions involve me to be able to connect to my computer. Blue screen hits me before I can log on, and there is no prompt to start in safe mode.

  Thank you very much!

  Try this to save your data:

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.
  Mick Murphy - Microsoft partner

• Need help with following error Message: ERROR of OPENING WET7CABLE. LOG FILE on my Windows XP laptop

  Please need help with an Error Message on my cell phone. The message is as follows: ERROR of OPENING WET7CABLE. LOG FILE

  This message came after running a disk that was provided by Belkin cable easy transfer (FU279) on my old laptop with Windows XP Home Edition you are trying to transfer my files from my old computer laptop w/Win XP on a new computer laptop w/Win 7. This record is for the Windows XP upgrade to Windows 7 and transfer the files.

  I want to thank all in advance for your answers.

  Nelson Santiago

  Hi NELSONSANTIAGO,

  1. when exactly you receive the error message?

  2. is the Belkin easy transfer cable recognized by the Windows XP computer?

  This file may be located on the Belkin Easy Transfer Cable installation disc.

  For more information on how to use or configure the Belkin Easy Transfer cable in Windows XP, see the link below the manual on the Belkin site and check if that helps.

  http://en-UK-support.Belkin.com/app/product/detail/p/4825

• Blue Screen of Death - message of STOP ERROR 0x0000C1F5

  Hello

  I had problems with my laptop. I can't have in windows, and I'm still stuck on the blue screen.

  What I tried to do:

  -Google various techniques of dealing with the blue screen. Which most mentions by pressing F8 to enter safe mode, it which didn't work.

  -Tried to use the (future shop) recovery disk that came with the laptop, which has also not helped me.

  This technical information:

  STOP: 0X0000C1F5 (0X00000000, 0X00000000, 0X00000000)

  Any help would be appreciated.

  original title: Blue Screen of Death

  Hello

  This error is somehow a special case:

  Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/946084

  How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
  http://support.Microsoft.com/kb/970101/en-us

  Stop error when you start a Windows Vista-based computer, even though hotfix 946084 is installed on
  computer: "0x0000C1F5".
  http://support.Microsoft.com/kb/958069/en-us

  Other methods:

  Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
  http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.html

  Easier to read same message
  http://BSODs.com/content/Windows-Vista-and-stop-0x0000C1F5-Linux-anyone

  SystemRescueCd
  http://SysRescCd.org/Main_Page

  Video fix
  http://www.YouTube.com/watch?v=Y_OjCkbZyTw

  Video Fix - Linux
  http://www.YouTube.com/watch?v=SwSvIhyZRVc

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue screen of death: stop error: 0X000000CE

  Hi, I think I got a bad virus on my computer that's all waste.  First of all, it all started when I clicked on a link, while the Christmas on Black Friday shopping. Then I got a download of unwanted software, called system difficulty, (the small icon of Windows) I could not use system restore to remove, whenever I tried to use it, it says cannot restore on this point. Tried several other points, but no joy. Can I get the dreaded blue screen of death with a stop error: 0x0000008e (0xc0000005, 0x804f8e80, 0xef76aa98, 0x00000000). Could sail in safe mode and tried to fix it with antivirus software, found 26, abducted, ran spybot search and destroy, found nothing. Still no joy. So today, I tried to start in safe mode, and it does not work in safe mode, guard reboot again and again. Then I hit F8 and turned restart turned off so I could see the Blue error screen that would flash for just a second, and now I have this stop error message: 0x000000ce (0xf88be6dc, 0 x 00000000, 0 x 00000000, 0xf88be6dc). I read forums on video and all drivers, but this happened just after I clicked on this link and got the virus with this unwanted software download. Anyone got any suggestions on how to solve this problem? Oh and I downloaded a program called error repair of my other computer and installed but it only scan my computer to find errors and then he wants to buy you the pack premium, so that did not help. It's my computer business running windows xp pro service pack 3. Wish it would have been on this cause she has the system recovery and it worked whenever I had a virus, I couldn't get rid of that. Thank you, Steve

  JoseIbarra is the expert resident on the Recovery Console and chkdsk/r. I'll track down his instructions. If the malware is responsible for the BSOD, I do not think that chkdsk /r will help, but it won't hurt. Or you might need to repair your boot.ini file.

  DEFINITELY get this brand XP reinstallation CD Dell! You can use it to perform a clean installation of XP or a repair installation of XP (chances are, you won't ever need to perform a repair installation, but it is nice to have this option) or to enter the Recovery Console to perform functions such as chkdsk/r.
  Chances are that your data does not fit on one CD! Depending on what you have, you might need to up to 100 CDs or more! Better to buy an external hard drive. Newegg.com has a very good selection of the most affordable. Here is an example:
  http://www.Newegg.com/product/product.aspx?item=N82E16822148409
  Creating a Ubuntu CD bootable 'live' (and then startup out of it, rather than on your hard drive) will allow you to copy your data to the external hard drive:
  https://help.Ubuntu.com/community/LiveCD
  There are also some other CD bootable antivirus (like Avira) which may help you:
  http://www.livecdlist.com/purpose/Windows-antivirus
  Here is a link to the instructions of Jose:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

• Satellite A200 - error message on Bule screen when I do something hard

  I have a laptop is the details below

  * Name model: Satellite A200 - 11 C *.
  * Model No.: PSAE0E-00X00KAR *.

  I installed Windows XP (Service Pack 2) on this subject. After installation, when I try to play video file or search for viruses or to work for a long time it displays a message on blue screen. The Message is as below:

  * A problem has been detected and windows has shut down to avoid damaging your computer
  * If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps: *.

  * Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.*

  * Check with your hardware vendor for updates to the Bios. Disable the Bios memory options such as implementing caching or shading. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select Safe Mode.*

  * Technical information: *.

  * STOP: 0X0000008E (0XC0000005, 0X00000000, 0X8057064A, 0XA95718B8) *.

  Starting from physical memory dump *.
  * The physical memory on the drive of dumping: *.

  According to the message, I update the WOOD, but I still facing this problem?
  Waiting for your response.

  Russell

  E-mail: or * [email protected]

  Hello, Russell

  A few days ago, I have similar problem on my Satellite P200. After you install a third-party application, I got BSOD every time when this application loads. I tried anything possible. To start in safe mode and change the boot options, OS restore to an earlier time using System Restore tool. I also tried to remove application preinstalled in safe mode but nothing has helped.

  In the end, I installed OS using recovery DVDs.

  So, in my case, I was sure why this happens. What is with you? This happens if you use some applications? What player and antivirus do you use?
  The same happens when you try to use Microsoft's Disk Defragmenter?

• Why the right mouse clicking on the icons and thumbnails cause error message and the screen resets?

  When I returned from vacation, my PC worked as usual, but later in the day that it would be not laod, it gets to a certain point and then a blue screen and try a reboot. Managed to use the 'safe mode' and finally 'System restore', but it kept crashing until I went back as it would go, i.e. end of /April. Been authorized since except this error right click of the mouse.

  Looks like you may have a bad Windows Explorer (not Internet Explorer) add on.

  What is your version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Here are a few thoughts:

  When the Windows Explorer (not Internet Explorer) is wrong to behave on a right click, begins to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added sometimes without your knowledge or consent when you install some software.

  Have you installed new software because the system finally worked correctly and if so, what?

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).  When you right click on something, the Explorer wants to display a menu of choices.  If there is a bad or outdated extension, Explorer may crash.

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment, then there is no message the next time you do whatever it is you're doing, you've found and fixed (or perhaps you can fix).

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:

  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft not to sort the display (by clicking on the column of Microsoft) if all the "" s are on top and easy to see.

  The s in 'No' would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there are visits, on Explorer crashing and what other people have done about it.

  You can Google something like:

  Explorer XP crashing

  (you must fill in the name of adds your suspect on).

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Disabling the extension does not uninstall the extension - it is just disabled.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  Last extension you have turned off the
  a suspect.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but when you turn off/turn on extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you find the problem, I reboot and retest anyway to really be sure that the problem has disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  If you get a blue screen of death (BSOD), you must do this:

  The next time your system crashes, provide more information on what you see.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If there is a name of the file listed in the STOP message, don't forget to include this information too.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Finally, I'd be curious to know why you say you get an error message and tell us what the error message said.

• How a Windows error reports tire disorder - specifically the following code which resulted in a Blue Screen of Death?

  The blue screen of death occurred during online communication using a Logitech VID communications program. The following error report translated by:
  -Fault bucket 0x7E_lvrs. ReadWriteThread + 243, type 0
  Event name: BlueScreen
  Answer: no
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\Mini013110-01.dmp
  C:\Users\Douglas\AppData\Local\Temp\WER-78015-0.SysData.XML
  C:\Users\Douglas\AppData\Local\Temp\WER7CDD.tmp.version.txt

  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Report0eeec72b
  Online from the best part of twenty minutes before it occurred. The two users of the
  program had the same result. (Blue screen of death) The two of us are running Windows Vista Ultimate Edition on motherboards model Intel D850EMVR with the latest bios update, Intel Pentium IV 3.06 Ghz, 533FSB CPUs, 2 GB of 168 pin memory of Samsung PC800 ECC, ATI AIW 9600XT 256 MB AGP video cards, Sound Blaster Audigy 2ZS with discs Live sound cards, ASB3940 Advansys SCSI adapters , Nakamichi5 disk SCSI MJ - 5.16 drives, Iomega SCSI ZIP 100 drives, and Lite on model SHM-165H6S DVD/CD rewritable EIDE drives. The two systems using model Logitech 9000 Pro webcam. (The two systems are essentially clones) Communication between Memphis, TN and Windsor, ON, CAN.

  Hello

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Vista workaround to access restore partition of the system (0xc0000C1F5 Blue Screen of Death error)

  Stats:

  Computer type: HP-Pavilion a6333w

  Product #: KC746AA #ABA

  Operating system: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_ldr.071023 - 1545)

  Processor: AMD Athlon (TM) 64 X 2 processor Dual Core 4800 + (2 CPUs), ~2.5GHz

  Disk space: 500 GB

  RAM: 3 GB

  Graphics card: NVIDIA GeForce 6150SE nForce 430 <-integrated on the mother board.

  ---------------------------

  Location: Try to update Windows Vista SP1 my computer hung up.  After a cold reboot, I got a BSoD (blue screen of death) with the error 0x0000C1F5 code.

  Current problem: whenever I try to boot Vista I get the same error during the vista loading screen.

  I tried the safe mode, the last correct log on the thing, and even a system restore disc that I downloaded from PC World.

  None of these online solutions have worked.

  ---------------------------

  Is there a way to bypass the default loading process and access the recovery partition drive to do a factory reset?

  If there is a way to save the info on my HD it please let me know.

  Thanks, Jcubed.

  Message edited by Jcubed on 11/12/2008 18:06

  I think the (BugCheck Code) code is 0x0000C1F5, and there's a Microsoft Hotfix for this:

  http://support.Microsoft.com/kb/946084

• Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes.

  Windows Vista crashes, I get the 'Blue screen of Death' and I have to restart. Different errors each time it crashes. I tried to reinstall vista without success of the problem being fixed

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.