Satellite A200 PSAF6A does not illuminate

Similar Questions

• The Satellite A200 display does not illuminate after being idle for 15 minutes!

  Hello!

  I just bought a Satellite A200 1 - AX PSA6 and install Windows XP SP2 + upgrade of bios for winxp.
  After 15 minutes of unactivirty (no not pressing the keys or moving the mouse), I set in power options in Control Panel - what must power OFF display.
  After this time display is switched off (black)!

  But I can't wake up my laptop!
  I'm press any key or move the mouse, but the screen is always black!
  But laptop works!
  I can ping and then by network or remote access connection.

  One way to solve this problem:
  Laptop open and close!
  A200 - "standby mode" and wake up with swithches on screen...

  Hello

  It seems that Windows XP Home edition does not work perfectly on the new laptops designed Vista. Before you live your laptop try to change profile settings (extended battery) power and test the parameters of this profile.
  Tomorrow I'll try to install Windows XP Home on my A200 and I'm really interesting if I even notice.

• Built-in webcam for Satellite A200 (PSAF6A) does not work properly

  Hello world

  The webcam works fine once the system starts. But sometimes after the laptop is idle for a while or return to standby mode, the webcam does not work and a "Graphics rendering failed" error message appears when I try to turn on the webcam of the built-in Camera Assistant Software.
  And I don't think that happens only happens on this machine: I got a replacement of the same model due to an error which is not related to the webcam, and again the same problem happened on this machine.

  I tried different drivers on the site of Toshiba (AUS) and the driver of webcam usb by default by Microsoft, but the same result... I also read through the forum of Toshiba. Most related threads did not mention the "Graphics rendering failed" error message. I think that this problem is caused by a defective software by Microsoft or Toshiba; and the reason being that the webcam worked after the system starts and with the premise of no change in material or displacement of the laptop, it stops working after a short inactivity or return to sleep.

  PS: I also reinstalled windows many times continue the recovery DVDs...

  Any help would be appreciated, thanks.
  Tony

  In my view, this problem could be related to the graphics card driver.
  I saw this error message (failure of the graphics rendering) while playing a few games.

  So in my opinion, this isn't just a question of webcam.

  Try to update the graphics driver. I put t know exactly what graphics card you have, but try this sites:
  www.OmegaDrivers.net
  www.laptopvideo2go.com

  Best regards

• My satellite A200-1AG does not illuminate

  Hello:

  My A200 power on. When I plug in the AC/DC adapter then flahs blue led once and that's it. No, do something more. No power led on.
  help please.

  Hello

  > My A200 power on. When I plug in the AC/DC adapter then flahs blue led once and that's it

  So, if I understand it is not booting with the plugged AC adapter and battery, too. In my view, it may be electrical circuit controller malfunction on the card mother, South of the bridge. It would be best to check with the other AC adapter.

  You can read this article just for information

  http://APS2.toshiba-tro.de/KB0/TSD57013H000JR01.htm

• Satellite Pro C660 does not illuminate

  Satellite Pro C660 does not illuminate. no noise, no light just fill out the dead.

  any suggestions?

  Hello

  On this virtual path, it is not possible to provide an accurate diagnosis. All you can do is to unplug the power plug, remove the battery and leave it for a while. Then press the power button and hold it for 15 or 20 seconds.
  After doing this connect the power running and try to start again.

  What happens when you do this?

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite M30X-127 does not illuminate

  Hello

  Need help!
  My satellite M30X 127 does not illuminate. When I push the power button, it is DIRECTED in turn. But nothing comes on the screen. There is no sound and the fan does not start. I took it to a repair center and they told me the motherboard is fried and it will cost me 400 pounds to fix.
  The guy there offered my 100 pounds for to buy me.
  Please a little help. What should I do?

  Hello

  Otherwise you will search in ebay for the second hand with the good motherboard unit.
  Sometimes people sell books with the failure to display or other parts of damage, but the motherboard is ok.
  You can try to use second hand motherboard in your laptop.

• Re: Satellite A200-1AE does not work

  Hello!

  I have Toshiba Satellite A200-1AE computer that does not work.

  I use (d) for educational purposes and now the problem is that it will display no signs of life. the blue led light on the front of it does not illuminate when I connect it to the AC/DC adapter.

  I tested the AC/DC adapter with a voltmeter (it came with the computer in the box of the card when I bought the computer) and it works well.

  Yes, the battery could be dead also, but it should work just fine without it and is not.

  What to do about this problem?

  He has a dead motherboard? No, I can't be brave enough to think about.

  Help, please.

  Thanks in advance for your reply,

  Goran

  Hi Goran

  Everything is possible... also a dead motherboard.
  But to make sure exactly what s laptop computer checking is necessary.

  So, you will need to contact the ASP in your country for the control of the laptop.

  Good luck

• Satellite L500-1DT does not illuminate

  My laptop does not illuminate unless the switch the off market cable is disconnected and the connections are bridge on the motherboard. Any suggestions please?

  You start your mobile phone if the battery is removed and the laptop connected to the power supply current only?

• LED light for Wi - Fi on Satellite L40 - 14F does not illuminate

  Is he someone correct the problem with LED light for Wi - Fi on L40 - 14F?

  What do you think average is by any fix for the WLan light

  Are sure you that you have enabled the WLan switch on the side of the laptop?
  Only this switch controls the WLan light!

  If the WLAN led does not illuminate after that you have activated the WLan switch there is something wrong with the hardware.

  then if there is something wrong with the hardware of notebooks is needed the help of ASP.

• Re: Satellite A200-1BQ, does not not after the screen saver

  Hi, I have a Satellite A200, 32-bit Windows 7 OS. When you use the screensaver to the PC stop responding. Have to spend because no response.

  If you have a report some problem send it please.

  Hello

  This means that Windows 7 hangs and does not answer only when the screen saver has been activated?
  Have you noticed the same problem with Win XP or Win Vista?

  If not then this behavior of the laptop could be related only to Win 7 and I think that it might be caused by the graphic card driver

  Remove the graphics driver that you have installed and test the screen saver using the common windows driver 7

  It would be interesting to know what is happening

• Satellite A200-1CR does not recognize the module of RAM 2 GB

  Hello

  I have a problem with the extension of the RAM.
  I have the Satellite A200-1CR with 2 x 512 MB of RAM.

  Now, I bought 1 x 2 GB RAM (DDR2 PC2-5300 (667 MHz); PA3513S-1M2G) but the BIOS and Windows recognizes only 1 GB.
  When I add 1x512mo to the second slot, the system recognizes 1.5 GB of RAM.
  Where is the problem?

  What should I do to make it see 2 GB?

  Paula

  Hello

  I think the answer is very simple.
  Satellite A200-1CR can be upgraded up to 2 GB of RAM.
  This means that you can use max 1 GB of RAM in one slot
  You used 2 GB of RAM and this module does not seem to be compatible
  In my opinion if you want to use 2 GB of RAM then you can buy 2 x 1 GB RAM modules

  Welcome them

• Satellite A200-AH1 does not start problem

  I have this Toshiba Satellite A200 - AH1 laptop computer that will not start.

  The system has 1 GB of RAM, (2x512MB).

  When I remove 1 stick, the system starts without a problem, if I replace it, and the other, the laptop boots also upwards. I tested the two ram slots and ram spent each time.

  The problem of the laptop does not start only seems to happen when the laptop has installed two sticks. I tried even to 2 different new corresponding sticks and still nothing until I remove 1 piece of ram.

  Everyone encountered this problem before?
  Any ideas what the problem may be.

  My only other option would be to install a single piece of 1 GB of ram, but I would really like a better option.

  Thanks in advance...

  > The system has 1 GB of RAM, (2x512MB).
  You got your laptop with these memory modules?
  Are you sure that you are using compatible RAM (DDR2-667)?

• Re: Satellite A200-1N7 does not read the SDHC card using Win 7 32 bit

  Hi all

  After that I installed windows 7 32 bit on my laptop, it does not read my sdhc card.
  And he did it when I got Vista.

  Can someone help what to do?

  Thank you very much:

  Adry

  Hello

  Have you installed the driver for the card reader?
  Have you noticed an unknown device in Device Manager?

  Please see the page of European disk from Toshiba for the card reader driver.
  Satellite A200-1N7 belongs to the PSAE3E series
  I found the driver of the card reader for Vista 64-bit
  Usually the Vista driver should work on Win 7 OS too

  If this does not work, then try the drivers released for A500 or L500 series!

  Welcome them

• Satellite A200 27z does not recognize DVD drive

  Hello

  Ive got the computer laptop toshiba Satellite A200 27z & a while a go it wouldn't turn on at all, I took it to a computer repair shop & they seemed to solve the problem, except that they delete all the "stuff" that comes with the laptop.

  On the most part, he always does things I want to do. But recently I went to play a dvd in there & it won't work, even if it does not play DVD if theyre sent to me by msn etc.

  Normally, when I put a dvd, toshiba dvd player would automatically right away, but now he used. When I go to manually open the dvd player toshiba a message just ups saying:

  * the specific drive is not found. Check the settings by going to settings > stock settings > source. or otherwise check that the disc has been correctly connected to the levels

  Ive been in the "action settings", but the source area is blocked (do not type anything in it). I don't know much about computers and so do not know how to check if the drive is properly connected.

  It will not also recognize when I put a cd that he either, as normally if I put a cd in and then itunes would automatically load upward, now itunes will not appear if a cd is in the laptop & I can't find it anywhere.

  can help someone, I have no idea about these things!

  I had this problem a few months ago, I thought that I should send it to be repaired but Windows Mr Fixit made and my dvd player is running again
  Here is the link
  http://support.Microsoft.com/GP/cp_fixit_main

  I hope this works for you