Satellite A200: SD card reads sometimes only

Similar Questions

• Satellite A200-1AX: card reader SD and BT do not work after installing Win XP

  Hello

  About a year and a half, I bought my laptop Toshiba Satellite A200-1AX and I'm very happy with it.
  It had Vista on it. For this OS, my SD slot worked, but I don't know the bluetooth because I don't use it.

  Some time passed and I removed Vista and now I have Windows XP with sp3.
  All right, but the SD slot does not work. Bluetooth does not work as well and it is not listed in Device Manager.
  I tried Toshiba Bluetooth stack, and when the installation reaches the driver part it does not move.

  Here's a screenshot of my device manager:
  [http://img22.imageshack.us/my.php?image=devicem.jpg]

  Those with question marks is not supported by XP as I know, correct me if I'm wrong.

  Hello

  Satellite A200-1AX belongs to the PSAE6E series.
  It s equipped with BT module so after installing battery BT BT should work correctly, you need to activate using the FN + F8 keys.

  Regarding the housing of card reader SD;
  You must install the Flash Media Driver for Texas Instruments. This is the driver for the Bridge Media Slot. This slot allows you to insert an SD card, Memory Stick (Pro) or xD picture cards.

  By the way; the BIOS must be updated after the installation of Win XP. There is a version of BIOS (5, 60-WIN right now) that is specially designed for Win XP

  Good bye

• Re: Satellite A200-28 cannot read the SD card of the digital camera

  Hello

  I just tried to get my laptop Satellite A200-28 to read my camera, an SD card and it happens in the card reader, but nothing happens.

  To what extent do you have to press or on my desktop, is not go very far before the card starts to blink and it opens the contents of the card. But on my laptop nothing.
  Just, it lets you put the card in but does not seem to realize is there actually.

  Any help on this would be much appreciated as it would be so great could receive laptop to read my camera card as easily as my office.

  Debbie

  :) Thanks for your comments buddy!
  Good to know that you resolved your own

• Re: Need driver for Satellite P100-346 card reader / PSPAAE / Windows Vista

  Could you please help me and post a link where I can download a driver for the Satellite P100-346 card reader / PSPAAE / Windows Vista 32 bit?
  THX!

  Hello

  Please, check here:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Satellite P100-324 - card reader cannot find file system

  Satellite P100-324 card reader not found on the RAW file system that uses my camera! How to solve a problem?

  Hello

  Have you tried to use the compatible card in the card slot multimedia digital several?

  In the manual, you should find the details on the right cards and compatible capabilities.
  See Chapter 8 (optional features)
  Should be compatible cards: SD, MMC, MS, MS Pro and xD.

  Please check that you probably have the right card!

• SD card reader supports only 1 GB cards satellite 2450-101

  I just bought a Kingston 2 GB SD card. Despite many efforts, I can't get my 2450-101 to format 1 GB storage on this map.
  Someone at - it of this experience and a way around it?

  I found in googel Satellite 2450-101 specifications and it seems that the card reader can manage only the SD card without support MMC. Additional not all card format SD is supported and therefore in my opinion the 2 GB format SD card is great

  I put t know if it will help you but I read somewhere in the forum about similar themes. The Toshiba SD card format utility has been updated and could format the 2 GB SD cards. I don't remember the version of this utility, but you can try to download the SD card from the Portege M400 section format utility.
  But as mentioned, I don't know if this utility works on the Satellite 2450 m.

• Satellite click Pro 2 - slot card reader works only not with Fedora 21

  I try to get my Satellite click 2 Pro P35W-B3220 to recognize the microSD card reader which is on the side of the screen.
  I have the other to works fine.

  I use Fedora 21 as my operating system.

  Hello

  If please run the following 2 programs in a terminal and paste the result into a response:

  lsusb

  lspci k

  then we can take a look at what your device is and gets support in the kernels later.

  Tom BR

• Satellite A200: SD card is not read

  I sat 200, Vista.
  When I insert my card SD my photo preloaded software will not work. Error "semaphore timeout period has expired.
  Tried other software & it will not read the card.
  If I attach a card reader, it's OK?

  Any suggestions? -Bob

  Hi Bob

  Do you want to say preloaded Myphotobook application or what? Be more specific.

• Satellite A200 - 23K - card SDHC not recognized on Windows 7

  Hello, I have a toshiba satellite A200 - 23K.
  I just installed Windows 7, all drivers support drivers toshiba and all the updates of microsoft windows, including the suport of 32 GB SD flash cards memory.
  http://EU.computers.Toshiba-Europe.com

  But in the Device Manager there is a witch of the element named "mass storage controller" has not been installed (which would be the SD card reader), but I didn't know any driver for "Texas Instruments PCIxx12 Integrated FlashMedia Controller" and installed the VISTA driver instead. Now, the look of the device is fine in Device Manager, but he only read a normal SD card, and when I insert a SDHC 4GB it came to nothing. In windows XP / vista and linux (fedora / ubuntu) there is no problem with SDHC (4GB and 8 GB Kingmax SDHC class 6).

  I would very much apreciate in advance if someone will make a driver for the card reader (I use it pretty mutch for photos).

  Hey Buddy,

  I think the problem is the Vista driver expired that doesn t work 100% correctly on Windows 7

  As much as I know Satellite A300, which supports Windows 7, is also equipped with Texas Instruments card reader, or at least the pilot is also from the same company with respect to the Satellite A200.

  In your case, I would try this driver, I hope it works! :)

• Satellite A200-09V - card Wifi detected but never connected

  Hi all!

  First of all, sorry for my English... so be cool with me!

  I have a Toshiba Satellite A200-09V so I change my router to a DLink with 802.11n. So I buy an internal wireless card but the card is correctly detected, but never whant to be 'connected '.

  The original card inside is an Intel 3945ABG.
  When I turn on my laptop, on the front of my laptop, I have a little orange light with a switch to cut the card.

  The card I buy is an Intel WiFi Link 5100 ABGN. But light, wathever I change the switch ON of OFF, again and always off the coast. Windows detects the card correctly and I install the right driver for intel, and in my equipment manager, the card is in the network card.

  But the map never want to get "online"... I can turn the card but I can not connect (so I do not see the wireless near me).

  I have the latest bios and driver... but it's like the laptop never 'talk' to the card and by the way, don't get pass the signal.

  But why XP detects the card but not get cards online? If the card was bundles, XP will never be able to "detect" the card and if XP correctly detects the card, it's as if the card is compatible with the motherboard? Isn't it?

  Thank you for helping be and I give you all the information you want...

  The network without WIRE Intel 3945ABG card only does support A, B or G standard and your router has N.

  So, you need to set the router to G standard or perhaps, you set up the router again to this standard and without security settings. It's the best way I think, and if it works, you can enable encryption and the security features more.

• Satellite Pro A100 - card reader no longer works

  Hello

  I have a Satellite Pro A100 - PSAACE-008002EN, that I bought a month ago, its worked perfectly so far and has been fantastic to use.

  The main part that I use is the memory located on the front card reader, I have used it with SD, MMC and cards XD for my pda and cameras, until now, it worked well, but recently, I was music transfer etc for my Sony PSP Memory Stick using a Memorystick Pro Duo Pro adapter so that the card fits properly in the slot and it works very well.

  All of a sudden the laptop can no more read on my MS card, I tried the card in a usb card reader and it works perfectly with or without the adapter. The laptop card reader reads cards SD MMC and XD, still perfectly fine but when I framed my memorystick, it shows the stick as being there in my computer, but when I click on the dialog box appears and says that there is no disc?

  I tried to install the latest drivers but it does not work, any help is appreciated

  Thank you very much

  Rich

  I found this information and first of all, I want to put a list of supported cards:

  SD (support of multiple Digital Media Card slot) capacity 8MB - 2GB
  Memory Stick (supported by several Digital Media Card slot) capacity 8 to 256 MB
  photo 16-1 GB xD card
  Memory Stick 8 to 256 MB
  Memory Stick Pro 256 MB to 2 GB
  MultiMediaCard 8 MB - 1 GB

  According to this list, the Memory Stick Pro Duo is not supported. But you used an adapter.
  But maybe this is a reason why the card reader cannot read the MS cards more.

  What you can do is to remove the card from the Device Manager reader, and after new restart try to install this new device

• Question about graphics on the Satellite A200-1VO card memory

  Hello
  How do you assign more memory to the graphics card on laptop Satellite A200-1V0?
  Thank you

  Hello

  in your case it s not possible to change the size of graphics by yourself, memory as graphics memory in your machine is shared with main memory, so if you upgrade main memory and graphics memory should increase. But this question is governed by the chipset and the user has no influence on it.

  Welcome them

• Satellite A200 - update card WiFi

  I have Toshiba Satellite A200 - 1 MB PSAE0E with WiFI card 4965AGN.

  I want to change the old WiFi card with Intel N 6300, but when I insert the new card of the laptop does not work, at all. When I go back to the old, all right. What should I do to fix?

  Thanks in advance.

  > What should I do to fix?
  Maybe a stupid comment from me, but noting is broken and cannot be fixed. Problem is hardware compatibility. If some piece of hardware is not compatible, it will not work.

  As far as I know that these improvements are not supported by Toshiba and if you want to have fast WLAN connectivity and the most recent I recommend you use the USB (USB WLAN key) solution.

• New RAM on Satellite A200 - 1 M 5 shows only 3 GB

  Hello

  My machine Satellite A200 - 1 M 5 has 1 GB of RAM initially (2 x 512).

  I've now updated to 4 GB (2 x 2 GB). However, the BIOS and the operating system (Windows Vista) showed only 3 GB.

  I've updated the BIOS, and now even if the BIOS shows 4 GB, Windows Vista shows 3 GB.

  Is there a solution for this?

  I tried to attach a stick at a time and they are both displayed in the form of 2 GB.

  Thank you

  Zubair

  I can just confirm that. It is certainly caused by OS Vista 32-bit. Using the version 64-bit 4 GB will be recognized without any problems.

• Satellite P200 - SD card reader not working not not running Win 8

  I upgraded my satellite P200 with windows 8, and the SD card reader does not work.

  Anyone know of a fix.

  It is always problematic for everything works fine when the old notebook use not supported and the more recent operating system.

  P200 works perfectly with Win7, so what you can try is to use Win7 driver. I put t know if you have tested already. In any case, if the laptop works well in general I think you can live without SD card reader.