Don't Aspire Switch 10 no sound after clean windows install

Similar Questions

• Compaq CQ58: No sound after upgrade Windows 10

  No sound after updating Windows 10.

  Installed HP Support Assistant, which came with a video to try a headphone jack with Windows 7, so no joy there.

  Tried several times scanning but "HP has encountered an error when trying to analyze your product."

  Although this suggests that the failure of the scan, produce a result: Driver (1)

  Under 'pilot', it says "Windows 10 drivers may be available via Windows Update".

  But I already tried Windows Technical Support, who drew a blank and referred me to HP!

  Hello:

  I recommend that you try the audio driver IDT W8.1 support page for your laptop.

  This works in most cases.

  This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

  File name: sp58406.exe

  If the W8.1 driver does not have the noise at work, try this...

  Go to Device Manager and click to expand the category of audio, video and game controllers device.

  1. click on the Audio CODEC of IDT high definition in Device Manager.

  2. click on the driver tab.

  3. click on Update Driver...

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7 Windows has updated your driver software.

  8 restart the PC

  Key is step 6

• Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

  I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

  What should I do?

  Hello

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

  Note: You must take the backup of the data before performing any installation of windows.

• Aspire Switch 10 does not light: 10 Windows Installer failure problem or coincidence?

  Greetings! I have an Aspire Switch 10 originally running Windows 8.1 32-bit with Bing, which is a little less than a year. I had not used for several months, so in the course of a few days had been the installation updates which have been missed, while it was not in use. Yesterday, the update of Windows 10 presented, I ran the utility, which determines whether the system can be updated and then decides to go, despite some reservations about it based on horror stories that others have shared with me. But I thought that the relatively 'new' OS on it mitigate the risk to some extent. Maybe not so much. I'm not a professional computer, but have done enough hardware and DIY software over the past 20 years that I thought I might give this a go with limited risk, but in hindsight should have been more careful because the operating system is rather an essential component of the computer.

  Download was fine, and the installation started and was about 19% when I had to leave unexpectedly for a few hours, so I don't know what happened during this time, or when the installation has stagnated. I went back to a completely black screen and a unit that does not turn on no matter what I try. I spent several hours last night looking and try different ideas on how to at least get it lights up, while I might try some of the other patches. No luck at all.

  I thought I had created a recovery file, but I can't find a flash drive with one, if my memory fails me on creating a file of recovery, or lost it. Anyway, since I can't get the unit running, I'm not sure he would do any good if I had one in hand or bought an Acer.

  The camera has a little less than 3 weeks left on the hub of the manufacturer and is subsequently under an extended warranty from Costco. However, the extended warranty does not cover problems caused by software or applications, so if it is a problem that was probably caused by the installation of Windows 10, I'm stuck with a brick or will continue to try to fix it myself or find a computer local store who might be able to help without the cost more than what I paid for it originally.

  All the advice, assistance, are welcome. Thanks in advance!

  Here's an update on my problem. This morning, I had a live chat with a support of Acer person. After a last-ditch effort to revive my machine from me, the conclusion was what I thought: the BONES disappeared. Fortunately, because the model is one that supports Acer for Windows 10 and my machine is still under warranty, the repair (original reinstallation of the operating system) will be covered by the warranty. The downside is that there is no local service center, so it needs to be shipped to Texas.

  Needless to say I'm going to stick with the original OS as soon as I get it back.

• No sound after video card install and reinstall drivers

  I installed geforce gt220 and he has somehow disabled my sound. so I uninstalled and remove the card. I activated the onboard sound in the bios and did a reinstall of the drivers from the sound card with the updated realtek drivers. I don't always get no sound it is grayed in audio and audio devices in Control Panel. I even tried a new sound card and windows are but does not load the device drivers audio, high fidelity.  When I check in device mgr is installed and active and working very well.  How can I solve this problem. I have read all the faq you have and none of them worked.

  Hi tttd,

  · Have you installed service pack 3 installed on your computer?

  Install the latest drivers from the sound card chipset and check the result.

  As you have tried all the steps that might have solved the problem, I suggest you to install service pack 3 on your computer if you have not installed the same.

  If you have already installed service pack then uninstall and reinstall service pack 3 that refreshes the corruption of a system file.

  You can download service pack 3 from the following link:http://www.microsoft.com/downloads/en/details.aspx?FamilyId=68C48DAD-BC34-40BE-8D85-6BB4F56F5110&displaylang=en

  You can check the link on how to remove Windows XP Service Pack 3 from your computer:http://support.microsoft.com/kb/950249

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite P10-873 - no sound after reinstalling windows device

  Satellite P10 873 PSP 16th:-not his Device
  Win XP-Home Edition SP2

  Everything was going well until a bad sector on the hard drive. I have Ran Chkdsk /r and re-installed windows.

  In Control Panel/System/Hardware/Device Manager it is a unknown device in the sound,.
  Section of video and games controllers which I think can be unit XT of SRS truesurround.
  also Realtek AC97 sound devices shown as correct and functional.

  Tried to load the audio drivers from the website of Toshiba (sound-s-p10-xp-510005490) and still no audio device

  available from the configuration/sounds and Audio devices Control Panel.
  Got the patch KB888111 from Microsoft and installed, still no luck.

  Any ideas as to what I'm doing wrong please?

  Satellite P10 is old enough laptop model. I have very good experiences with P20. It's almost the same laptop, but a bit bigger. A friend of mine uses P10 for the job and we have installed WXP Pro using all the tricks of the Toshiba support page. The OS is installed two years ago, and the sound still works.

  If you can not get this to work, I recommend you remove all the important data for the D partition or save on an external device and make the clean OS install. It will be interesting to see if the problem persists.

  By the way: is a connected to your laptop satellite external game controller?
  An interesting solution, I found here.

• Satellite P10 - no USB function after clean XP install

  Hello, I own a cute notebook P10. After you have installed a new XP with SP3, all USB ports have no function except the power. The red light of a connected mouse tells you. System Manager shows no malfunction, everything is installed (shows 5 USB-controller with hosts). Who has an idea?

  Greetings from the Germany

  Manfield

  Hello!

  I think that for this old book you can get a service provider authorized Toshiba recovery disc.
  Contact and ask for it. It should take only a few minutes to get a response from a technician.

  Good luck!

• G71-340US notebook: no sound after 10 Windows free update of WIN7 on a G71-340US laptop with CODEC IDT.

  After the free upgrade to WIN7 for WIN10 my laptop has no noise (with internal or external speakers). I tried to uninstall driver IDT and allowing windows 10 to reinstall the driver through scanning for changes of HW - still no sound. I would appreciate any guidance or fixes to this problem. Thank you.

  I'm happy to announce that I now have sound on my laptop G71-340US. After that more detailed error troubleshooting I found that there is an application called IDT Audio PC (aka IDT HD Sound) installed on my laptop by HP (OEM), I think. While I don't know exactly what function of this application is, it seems, it is related to activation of the feature of IDT HD Codec drivers. Somehow, I decided to look in Task Manager - startup and I saw this listed IDT Audio PC. I clicked on disable and then a minute later clicked on activate. After I did that, as simple as it seems, I have now heard both internal and external speakers. This is the first time I heard all the sounds since the upgrade to WIN10. I checked several times by re-booting my laptop and every time I now have sound. I will continue to test it through the week and see if it continues to be OK. In the meantime, I thought I'd share this potential fix (or solution) with all stakeholders. Perhaps others will find this useful and give me your comments. Fingers crossed!

  PS. BTW, if anyone out there knows what PC IDT sound is by all means share your knowledge. I'm curious why this app appears more often in the forum messages and how it can relate to the WIN10 upgrade. Sorry, but I do not remember what prompted me to look at the task - starting but Manager I'm glad I did. It's great to hear again!

• Satellite 2450 - no sound after I re-installed XP SP2

  I need to find a driver for my sound card, and I don't know how.

  I have a Satellite 2450 and I bought it in 2003 at the Denmark.
  That's basically what I know on the PC and it does not help me much because looking for drivers is structured in A, B, C... etc the series, I don't see no number 2450.

  Can you help me?

  Hello

  Your series of laptops is very old ;) to look for in the area of ARCHIVE page of European driver of Toshiba.

  There you should find an audio driver that could be compatible with the Win SP2.

  Please post feedback after reinstalling the driver.

  Good bye

• No sound after reinstalling windows xp

  I formatted my hard drive and reinstalled Windows XP Professional.  I installed the SP3 also.  Except that now it does not even record that I have a sound card.  Reinstall, I used with sound edge and it worked perfectly, but now in Device manager there is an exclamation mark next to "Audio device on high definition audio bus." After running dxdiag, it says that there is no sound card.  Any help would be appreciated.

  After having reinstalled XP did you download and install the audio drivers?

  Download drivers

  Visit the manufacturer's Web site and select your model (this is usually done in the Support section). You should be able to download drivers for your model if they have drivers for your version of Windows. Download the driver (s) and follow the instructions to install - the process may vary with different manufacturers, so I can't give you exact directions.

• HP compaq: no sound after reinstalling windows

  After I reinstalled windows, the noise was gone, and I want to say the sound chip embedded in the computer. I tried to install all types of drivers, but nothing helped. It shows that there is no audio device. So is there some software/driver that woukld do computer see and use the chip integratedsound?

  It changes everything because the dc7800 and dc7900 use a different audio chip than does the dc5700/dc7700.

  You need this audio driver W7 for the dc7900...

  This package contains the driver for the ADI Audio CODEC high definition (HD) in desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45615.exe

• Satellite L750-1E5 - no sound after upgrade Windows 10

  Installed 10 yesterday and immediately lost my wireless connection. Who decided to roll back the wireless network card driver in Device Manager.

  Second problem - no sound from the speaker is internal, but Device Manager reports no problem with its controller...

  "My Toshiba" app reports L750 not supported for Windows 10?

  Can someone help to solve the noise problem please?

  Second problem - no sound from the speaker is internal, but Device Manager reports no problem with its controller...

  Even if the error is not visible in the Device Manager, it would be a good idea to uninstall the audio driver of the peripheral zone manager → sound video controller and game.

  After restarting again the system should automatically search for updates and new driver.

  Of course, the unit should always be connected to the internet.

• G6-1103sg: no sound after upgrade Windows 10

  Hello

  yesterday, I upgraded my g6-1103sg to windows 10 pavilion.

  After that the sound card is available, but there is no audio output.

  I tried to uninstall drivers and reinstall, but it did not help

  Can someone help me?

  Hello:

  The only suggestion I can offer would be to try this driver and see if it works on your model...

  This package contains the driver that allows to the Audio IDTHigh-definition (HD) in models of laptops that arerunning an operating system supported.

  File name: sp63555.exe

  If this does not work you can try this...

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4-> select Browse my computer for driver software.

  5. Select-> Let pick me from a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Warning message is displayed, but the answer Yes.

  7. Windows has updated your driver software.

  8 restart the PC

  Key is step 6.

• Satellite L40 - no sound after reinstalling Windows XP Home edition

  I really need help from anyone out there. I installed Windows XP Home edition on my Toshiba Satellite L40 after that I realized, there is no sound. I tried to install all kinds of updates, drivers and all, but still nothing.

  All make me is that I have no audio device.
  Grateful for the help as soon as possible.
  Holla.

  Do you have the yellow marks in Device Manager?
  Are you sure that you have installed all the drivers?

  Have you installed SP2 or SP3 for Windows XP? You must at least use SP2 for XP.

  And as said Akuma, check the Microsoft KB to the hoftixes. Before you apply this update, you must remove the driver. Otherwise it will not work.

  You can also search in the forum, there are already discussions on this topic.

• Pavilion all-in-one 23 q011a: no sound after upgrade windows 10

  Operating system is window 10, do not know what bit. Sound works well on windows 8 that came with the computer after the upgrade to not win 10 no sound. Reflected on the line and tried to change the bitrate and the speaker on the range. Have reset the computer - still no sound. Thank you

  Have you installed the audio driver Windows 10?

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71569.exe

  You can find all other 10 Windows drivers available for ytour all-in-One PC at the following ADDRESS.

  http://support.HP.com/au-en/drivers/selfservice/HP-Pavilion-23-all-in-one-desktop-PC-series/7902091/model/7842738#Z7_3054ICK0KGTE30AQO5O3KA30R1