Satellite A200 - sensitivity Touchpad problem

Similar Questions

• Satellite T110-107: touchpad problem - pointer move sometimes

  Good afternoon everyone,

  Currently I have a series of Satellite T110-107 and have problems with the touchpad.

  I start the computer and the touchpad works very well for a few seconds, after that, the touch pad stops working to full capacity.
  If I wander my fingers on the touchpad and the pointer does not move, sometimes it will move up and down, but not as it should.

  It is a common problem, or is it a hardware problem... or is it the fact that I'm just not accustomed to having the correct settings on windows7?

  All help reveal be great, because it's very frustrating!

  Kind regards!

  Hello

  I found a few tips and tricks that you should try.

  First, you must change the sensitive touchpad settings to lower the level.
  Go to control panel-> mouse and all the settings for the touchpad to the value has a less sensitive level.

  You should also right click Synaptics Pointing Device (in the taskbar) and get in the middle of the page Double click speed on.
  Move the slider to half way down the beach. This should help you too.

  Last but not leas, you will need to disable zoom pinch.
  Go to the icon in the lower right corner Synaptics pointing device, click on 'The pointing device properties', click on the "Device settings" tab, then the settings button. Uncheck "Enable Pinch Zoom" under "Pinch Zoom".

  Greetings

• Satellite A200-12V driver problem

  I bought a Satellite A200-12V during the Christmas sales and decided to downgrade the OS from Vista to XP SP2.
  I went during the major part of the allocation of this forum and installed XP on the machine. (after wake the mobile ICH8 driver and the bus driver from realtek on xp drive).
  I also install the driver for the graphics chip, the driver LAN and wireless trouble-free device driver at all. (Also Windows update as well).

  The only problem I am facing is whenever I try to install the chipset driver or other drivers as mass storage device drivers (I think that's going to be the TI card reader driver), touchpad, key software are supported on Fn and the Chicony Camera Assistant Software from the Toshiba driver, I always had a blue screen of death just after the restart. Even if I had a created restore point before the installation of the driver, the machine jumps to the blue screen just after the restoration of the system.

  I have flashed the BIOS to the version for XP... and I have no idea on what to do next if it executes correctly.

  I hope that someone in this forum can make me light in solving this mystery. It's a real pain after you have reinstalled XP on the same HDD during more than 20 times of testing and errors. ; p

  Hello

  For me there is no sense to install any driver if you have had no success with chipset installation. Driver chipset is the basis for other stuff for me. I installed Windows XP SP2 Pro family edition several times on different A200 and P200 successfully. The BIOS is the version of Windows XP Home edition and it is very good. Please use the Windows XP SP2 home edition installation. After the fresh install of WXP follow the instructions facilities document (if available) and please follow this order of the facilities. It is very important.

  Moreover, the number of PAxxxx who has your laptop?

• Power on second hand Satellite A200-1d(a) problem

  I've had my Toshiba Satellite A200 for awhile now and it was second hand when I got it.
  The AC light flashes constantly and the laptop is free of charge, is it possible to fix this?

  I can't turn on the computer, because there no charge in the battery in any case help would be greatly appreciated.
  Thank you

  Power light flashes is probably a sign that he has a serious problem with electronic control gear.
  Unfortunately, these issues cannot be resolved by the owners of the laptop.

  You should contact the nearest Toshiba service provider, explain the situation and ask for help.

• Satellite A200 and Win7 - problem loading the graphics driver

  Hi guys I have a problem with my Satellite A200 (PSAF6A).
  I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
  Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

  Thanks for your help, a lot.
  -Chris

  Hello

  It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

• Satellite A200 - recovery disk problems

  I just bought the (all new store big tech) Satellite A200 for a few months and not used because I was on business trip to take. This weekend, I opened it up and running for a while.

  After that I read the manual and found that I need to create a recovery from the tools provided disk. However, the problem start here:

  1. when I click on "Recovery Disc Creator", a message is display "no HDD Recovery area!, the toshiba Recovery Disc creator cannot be launched."

  2 then I call center service support and to inform that there is a problem with the "recovery disk creator" and I have to retrieve the laptop using the hard drive partition recovery (waiting when 0 turning on the system) and the next step is complete:
  a. the laptop's boot in the recovery screen function.
  b. when I try to "restore windows PC" (option 3), it is display and error message on file not found.
  c. when I try to click on "restoring the recovery disk" (option 5), it asks me to put in the recovery disk which I do not have?

  NOTE: I'm sure that the hidden recovery partition is therre. 1.46 GB. There is no way that I can access the hidden partition from a normal windows vista screen (without drive letter).

  Then, I called the support center again (now what difference person support) and to inform you that:

  1. my recovery partition is corrupted and I need to get the recovery disk again (which I did not), it's going to cost me AUD $66 (I got from HP one and cost me AUD $15 and will be free if I come and Pick-up) for administrative costs. And it is a procedure.

  2. I explain to the support staff that it is brand new in the box laptop and I consider it as defective on arrival (DOA or FOA.

  3. I also ask what causes the problem and has been a consultant with the following reason:
  a. I may have deleted the partition accident (impossible because I still can start on the recovery partition, but can not recovery which all).
  b. There may be a virus infect in my laptop which was remove my recovery file in the hidden partition (ridiculous, you can delete some files in the drive on which you cannot yet access).
  c. I should create a recovery disc when the first time LAPTOP computer service. Which it is recommended, I get a question that if I do not, or I forgot to do so, this means that the software will automatically delete the system restore image file? I have no answer for that.

  State (when I try to post this messgae), I'm still waiting for the staffs of complaint call fomr back (very tie when you talk in support of service these days).

  NOTE 2: I would like to raise these issues, not because I want something (I do both IT support) complaints but I just want to solve the problem:

  1. is there some sort (software) allow me to access the hidden drive in and out of recovery disc image, my laptop still have the partition.

  2. is there a link I can download image recovery (in iso format) disc again? I've known it is not a question of wise, but when I ask the support staff that can re - install windows vista with the license key from the bottom of the laptop and has advised that it is not work or turn on.

  3. is there someone out there has similar problem

  Hi Thomas

  I have a European model A200 (don t know what you model is) and the A200 was NOT equipped with the option of HARD drive recovery! This means that you cannot create your own recovery disk!
  My laptop came with the Toshiba Vista recovery DVDs!

  Still is it that your 1.46 GB hidden partition is not the Toshiba recovery partition but Vista hidden partition. It contains the WinRE files that are useful for repairing the operating system if something will go wrong!

  Second, the Toshiba Recovery folder is too big for the partition of 1.46 GB!
  So it is not possible that it would be placed on this s partition!

  So finally, it seems that you will not be able to create the own recovery disk and therefore, you have to order it from the ASP in your country.

  Welcome them

• Satellite A200 - network connection problem

  My Satellite A200 struggled to connect to my wireless network.

  It detects the network, but then when I opened the networking and sharing service - it comes up with an error message - "the dependency service or group could start.
  I understand that it is the network location awareness service which does not
  Then he gives me a message saying that I should check my system event log, or are looking for the servoce error code: 1073741288
  Help, please!

  :)

  It is more a problem of Microsoft.

  Google search for "the dependency service or group could start.

  There are a lot of results, for example (http://answers.yahoo.com/question/index?qid=20080215035316AAStYGP):

  * Go to start > run and type services.msc, and then press ENTER.
  * Look for diagnostic and defined policy on Auto Service
  * Wise restart the service too.

• Satellite L670D-159: touchpad problem

  I have the erratic behavior with my touchpad.
  Everything works fine and after a while, everything is frozen. I can't use the touchpad.
  Sometimes, the "tab" I want to save my work, and reboot the system.
  But I do not have to manually stop.

  I have the latest driver telecharged, "version 15.0.8.1 10/03/2010 Synaptics. But no change.
  Can you help me please?

  Concerning

  More information: I return to my post for the problem appears right now!
  So live: temp °: beetween 36 ° and 40 °. Fan max speed: 62%
  The touchpad does not work, but this time the '. insertion point' is able to move!

  If for example, I am writing this post with the finger, I put the "PointInsertion" where I want to and click on the left button: it is right and I can write to this location.

  Close other windows, I use tab, button left and right.
  In conclusion, I think the bad (?) material is only sensitive touchpad.

  What should do?

  > Everything works fine and after a while, everything is frozen. I can't use the touchpad.
  > Sometimes the "tab" I want to save my work, and reboot the system.
  > But I do not often have to stop manually.

  Have you noticed the same thing with the external USB mouse?
  If the problem is the same using the USB mouse and touchpad then the issue is NOT related to the touchpad, but maybe other reasons may be that the system is overloading or the operating system may be corrupt.
  Have you tried new installation of the OS?

• Satellite A200 battery charge problem

  Hello, I have a Satellite A200 - 23 k in June
  3 days ago the battery stops loading at 65%
  I leave the battery to 0 (to recalibrate it) but surprise, this time stops at 45%
  I put the battery on a second laptop (same model) but it works the same way

  Any help will be apprechiated
  THX

  Hello

  It looks like a malfunction of the battery. What do you think?

  If the battery issue also appears on the second laptop using the same battery then I would try a new battery.

  It could really be a malfunction of the battery
  It s worth a try

• Satellite A100-201 touchpad problems

  I searched through the forums and many people have had problems with the touchpad, but nobody seems to have quite the same problem, as I have! If this has been asked to answer also my apologies, but I can't!

  I have a Satellite A100-201 with a 'Tablet' (as described by the technique of the Toshiba product - no mention if it comes to Synaptics or Alps, or anything else, is not that it would mean anything for me anyway. It is certainly NOT a dual pad that turns on with the blue buttons, etc.)

  Have had the laptop for over a year, and I got it all the time I have a problem where 'sometimes' function on the touchpad scroll bar doesn't work, all on his own. Sometimes I turn on the computer and it works fine, sometimes not. The same goes for the service where you tap the top right of the button and the narrowings of the active window (don't know what this is called). There seems to be no reason for this, I find the scrolling feature really useful. The rest of the touchpad functions works very well.

  I don't know if it's to do with drivers as I am not computer-oriented (I can use one for day to day stuff, but that's all) or upgrades of windows as no one else mentioned on another thread.

  If anyone has any idea how I can:

  (a) turn back ON the scrolling feature and

  (b) set it so it is permanently under voltage I would be really grateful!

  Thanks in advance!

  Hello

  do you have challenged yourself with synaptics/Alps touchpad Control Center / (whateveryourtouchpadsmanufactureris) and checked the settings?

  As far as I know are these touchpads really complicated when you use them, but * more * usable after setting the key to touch about the sensitivity options, etc...
  You can configure almost the entire touchpad area to adapt to your needs...

  Please, check the settings and make sure that your keyboard is configured correctly.

  Welcome them

• Flashcards and Fn - Satellite A200 psae6e key problem

  Hi all.

  I read a lot of posts with this problem.
  I noticed some people fix with value Canadian extra package, but is not a Canadian package extra for my model.
  I have a200-psae6e. But I download Canadian version, it is not for my model, I installed it but it does not work. Flashing cards do not appear.

  Then I installed the extra package for my model and it works fine, but does not work Fn + Fx! I have
  the value cards turn signals don't start up with Windows and now I can use Fn + Fx but only for keys ESC, F1, F3, F6, F7 and F11, other do not work!

  Can someone tell me how to force the other keys work?
  I didn't need flashing cards if I have good, that also I don't have turn signals with Fn + Fx cards keys don't work all the keys.

  Is there a solution?

  Same problem with my computer, but even worse because when I push button FN of my computer crashes. Nobody seems to know the solution. If you can, uninstall all versions of VAP, you have and try to reinstall one with advanced options, common Module is checked and pray. I think that some components of vista update is related to the normal working FN.

• Satellite A120 - scroll Touchpad problems

  Apparently intermittent points, my laptop scrolls uncontrollably to the point where it is unusable.
  Never, he scrolls down and stops just as suddenly as it began.

  I have tried everything I can think, scanned several times for the virus and reinstalled the touchpad drivers and am now at the end of my home.

  Any help would be appreciated.

  Hello

  This also happens if you disable the touchpad? You can use the FN + F9 key combination to disable the touchpad. Check this box!

  In addition, you should try to update the driver for the touchpad. You can get a new version of the Toshiba page directly.
  Alternative try to reinstall Windows with Toshiba recovery disc.

• Satellite A200-1A 9: problem with sending/receiving e-mail using Windows Mail

  Use Windows mail, I have to open/close the program to be able to send emails, they are entangled in the Outbox. By closing and reopening the program, mail is sent. Also the blue figure 1, supports showning 1 mail unread in the Outbox is there all the time, although there is no read or unread emails in the Outbox

  Not a problem server as all mails are go/very good reception on my desk.

  Pressing on send and receive button does not help. Although from time to time on what it will receive emails when you press send/receive, but will not send the

  I have Norton Internet security 2007 and getting fed up with the ongoing problems that seems to cause during the period 2004-7.

  Is there a problem with the running with Vista Windows mail program which is known

  I think I found a solution

  Please check this:

  Windows Mail won't send or receive emails
  http://support.toshiba-tro.de/KB0/TSB7701X30005R01.htm

  It seems that the update of the Software Desktop SMS Installer version will help to address this problem.

• Satellite A200-1VP - Wireless problem

  Hello

  Windows Vista Edition Home Premium.
  Intel® PRO/Wireless 3945ABG wireless card.
  2 GB of ram.
  Intel core 2 duo t5250 - 1.5 ghz
  160 GB

  Recently, the wireless on my laptop has stopped working, I think that this is due to the switch wlan on the bottom of the laptop. Before it used to work perfectly. But a few days ago I started the laptop and the wireless did not work. I took a glance on the switch and it seemed to be extinguished (no orange), even if it was to position it. It was weird. It does not pick up wireless networks, but there are loads because I checked on my brothers laptop computer.

  That's what I tried.
  first thing I did was to switch to stop, then press it. No chance!
  Then I left in the off position and restart the laptop. Then he walks. No chance! still no light.
  Then I checked the Device Manager, everything seemed fine. He says that the wireless card worked properly.

  Another thing to note is that the device has not been disabled, I tried fn + f8, but has not made a difference.

  It's the 1 year warranty ended last month.

  Any help on that would be great.

  Good news buddy. ;)

• Satellite A200-03V - LCD problem after shock

  Hi, my laptop works very well (hardware), but I have no display lcd. externel display, work very well. I have no idea of this view or the other?

  Thank you

  If I understand your issue with it stopped working after the shock... I guess disattached cable lcd and to resolve this you must disassemble the round to be tied. Note, I amn't make sure that the cable of the LCD is a troublemaker