Satellite A210 - ATI Radeon HD2600-problem with the TV via S-video connection

Similar Questions

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Video device USB has a driver problem__ __There is a problem with the driver for USB video Device.__Device information __Name: __ID USB video device: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 code __Error: 10 _ _ _

  I hava a dell inspiron 1440 with windows 7 and a a few days ago, my webcam was working just fine but know that it gives me this after troubleshooting

  Has a USB video device driver problem

  Not fixed

  There is a problem with the driver for USB video device. The driver must be reinstalled.

  The device information

  Name: USB video device ID: USB\VID_05CA & PID_180C & MI_00\6 & 69C3BD0 & 0 & 0000 Error code: 10

  Hey laloo.16,

  As the error message states clearly that reinstalling the driver is required, please do the same. You can uninstall the driver that is currently installed from the Device Manager.
  To access Device Manager:
  1. go to start and type Device Manager.
  2. Select Device Manager in the control panel list.
  3. go to your device.
  4. to remove:
  Right-click on it and select Properties.
  5. Select the driver tab and click on uninstall to uninstall the existing driver.
  6. close Device Manager.
  Now go to the link below. Download the Dell WebCam software for your product.

  http://support.Dell.com/support/downloads/DriversList.aspx?OS=W732&CATID=-1&DateID=-1&impid=-1&OSL=en&typeid=-1&FormatID=-1&SERVICETAG=&SystemID=INSPIRON1440&hidos=WLH&hidlang=en&TabIndex =

  Please choose the appropriate version of Windows 7.  Install the driver and see if that brings your webcam to work.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Satellite A660 - message: WARNING: a problem with the cooling system

  My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

  So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

  He also mentioned that I could use the machine with a cooling pad until then if I wish.

  Any feed back?

  > Yes the fan had stopped working and touchpad area was hot.

  In this case, there is really a hardware problem.
  But I m wondering why he should replace the HARD drive and the motherboard
  Perhaps only the cooling module began at malfunction of course this is just a speculation
  If the technician has checked the material, then they need to know what parts are not OK.
  So don t think you have no choice.

  But the guarantee is valid for all is free

• Problem with the display of a video frame in Windows Media Player 11 on Vista

  Hello

  I am having some problems with the Windows Media Player 11 on Vista. On my XP machine, when I discovered a video frame by frame, it works perfectly back and forth. However when I try to play the same video on my Vista machine, the button to the front of the image works perfectly fine but the previous image button takes video from 5 to 10 frames. Since I use my machine Vista more and need this feature often enough, it gets boring very quickly. It is a drive problem (since the same player works great under XP with the same video) and can be solved with a patch or some sort?

  Thank you

  Hello Helloaamir,

  Thank you for posting.  I understand the problem you are having, but I do not understand why in the need for these features.  Depending on what you're trying to do, may be able to use Movie Maker instead of it you also has characteristics of the image by image.  If you could include that you are using this feature, because I can give you a good alternative or possible difficulty of deliverance.

  Looking forward to help you any further. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the sync audio to video when you use Windows Movie Maker version 6.0

  I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD.  I've noticed that the audio and video are out of sync, ONLY after the first thumbnail.  No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?

  Hi Fabian119,

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.

  You can visit the following links for more information on codecs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite A210-MS9 overheats like crazy with the fans always on

  Dear forum members (and guests)

  I am a happy owner of the Satellite A210-MS9 laptop, and I'm having a major problem. This notebook is so hot, for nothing. as it will close for more than a day and the second I turn it on. the fan mounts like crazy and it disables never (EVER), noise is killing me, makes me emotional stress. and not only that, I thought the problem of vista, so I installed xp, same problem. I even turned off all the pleasure of the eyes in XP (imagine that) However, the fan never stops and it is too strong. so I went to google (for all best friend) I have found that the average temperature. for a system like mine is 29.6 (top) and 30.9 c (bottom)

  So I downloaded CpuCOOL to check my temperature, guess what was my average temp, it's 50 ° c. 50, it is 67% more than it should be.
  I don't know if I'm the only poor with his laptop tries to kill him with emotion, but I need help, desperately. now I see why they call this thing a laptop more, because you can never he put on his knees (if you want to have children) and I want to have kids.

  good luck and good night

  Hi Pauleece,

  Looks like there is dust in the heat sink causing the CPU overheating. This happens to all laptops used in dusty environments.

  A quick fix would be to blow into the air vents when the laptop is turned off. This will reverse the flow of dust and dislodge. You can also use compressed air to blow off the dust.

  But if its in bad shape, you will need to disassemble the laptop and dust correctly. An ASP can do for you for a small fee.

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• Problems with the work computer remote desktop connection

  I used the remote desktop for VPN connections to work for a few years.  My new employer has a Sonic Wall VPN.  My home PC is running XP.  The work computer is Windows 7.  I activated the remote on this computer connectivity.  I can connect to the VPN with a number.  Remote Desktop detects the computer to work without problems as well.  When I try to signon with my valid credentials, I get a message that my ID or password is invalid.  By using the same credentials locally everything works perfectly.  I tried to connect with my user disconnected and connected in the workplace with no difference in results.  Any thoughts there?

  Hi DougH_50,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Problem with the "timing" on a video editing with windows move maker

  Well, I do a video that has different pictures and a corresponding audio track. When I start the video from the beginning and watch it, it seems that the photos are a little behind where they should be to correspond with the music. However, when I start the video of any other point without looking at the true it is that the photos are actually a small ADVANCE on I wish it. How can I fix? Pleaaaasseee help

  Well, I do a video that has different pictures and a corresponding audio track. When I start the video from the beginning and watch it, it seems that the photos are a little behind where they should be to correspond with the music. However, when I start the video of any other point without looking at the true it is that the photos are actually a small ADVANCE on I wish it. How can I fix? Pleaaaasseee help

  ======================================
  Two thoughts...

  (1) you may have a problem with audio / music which is not
  fully compatible with Movie Maker. The best choice of audio.
  music formats would be .wma or .wav.

  (2) the addition of transitions between the photos will reduce the picture
  duration with overlap.

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Cluster AP541N of problems with the sticky homelessness and slow connections

  I have a client with about 20 users with wireless and a cluster of 4 AP541N on their activities. They have an app that they get on a cloud that connects to a remote desktop in the same sense that Citrix. We have a problem of connectivity to the wireless network and also some speed issues. I went when they have problems and tracked down the AP where is the MAC machine and often it is not the closest access point to the user. Many times, it is an access point with 2 other AP in the same cluster between him and the client computer.

  Concern for speed appears on different machines, not necessarily the same as those with sticky homelessness issue. Some of them have a wireless n card, but are only connect to g. I don't know if it's related to that, but I also have machines 100% or close to it, the signal strength and they dive into the region of 15Mbps. The LAN is fine, other wireless devices are fine, but these intermittent problems happen to some users. We have updated the firmware for the wireless card, and generally, this does not resolve the issue.

  The cluster uses automatic management of channel and in order to cut down on the thorny issue of roaming my network engineer value emission high instead of full power to limit overlap.

  Any suggestions about where to go next with troubleshooting? These users entered a wireless network that was not clustered with retail store bought routers Cisco wireless and had similar or better performance, so they ask why they're not getting a better experience with the equipment upgraded. Thank you all

  My name is Eric Moyers. I am an engineer in the Small Business Support Center.

  I'm sorry to hear that you are experiencing this issue.

  The AP541N does not support roaming. Yes, I know that in the Administrator's Guide, he mentions one seamless experience. It is actually mentioned in the WDS section and not Clustering. However is not roaming as you would find with a wireless network with a wireless LAN controller.

  Within the Cisco Small Business equipment and any other provider, for networks that do not have a controller wireless LAN to a wireless client to move from one access point to another that the first signal would actually have to drop to get the next strongest signal to authenticate and connect.

  With the AP541N, there is an option to activate prior authentication if you use Radius Authentication. This assistance in faster authentication but is still not roaming and would require a signal switch to the next strongest signal.

  Have you done a scan wireless in your area? I use a tool called Analytics of a Wi - Fi connection, the best thing is it of free. This can help determine which static channel is best for your environment. One of the Con to use an automatic channel is that when the AP is changing channels, it will pass some clients are currently connected and won't allow all connections until a new string is found and the beginning of the device transmitting again.

  If you want help to determine the best configuration for your situation, lease call our support center and prosecute so that one of our engineers can work directly with you. Once you have a file number, all engineers know who I am and can reach assistance me if needed.

  Eric Moyers
  .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
  Wireless and monitoring subject matter Expert

  Please note the useful messages and let know when your question has been answered.

• Problem with the Easy Cap Driver video capture device

  I have an EasyCap USB 2.0 video adapter and that you have installed the software, but the video driver does not load.  When I look at the Device Manager devices I see the audio drivers are installed but the video driver has the following message "the drivers for this device are not installed. (Code 28) ».  I tried to find updated drivers on the web without success.  Someone at - it suggestions?

  Hello

  What Ulead Video Studio version do you use?

  Microsoft Compatibility Center has no information on the compatibility of Ulead Video Studio.
  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=Ulead%2BVideo%2BStudio&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I suggest you to install Ulead Video Studio in compatibility and see if that helps.

  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Post us the results after trying the steps above.

• My Satellite A300 - I have a problem with the lighting system

  Hello

  I bought new laptop satelliite Toshiba's 300 and the lighting system does not work

  When I click on the tab illumination he cut the sound only and do not switch off the light...

  Best wishes

  Have you tried to reinstall the package of added value?

• Problem with the output of HTML5 video

  Hi, I have this course that I build. I need to insert several videos. 1 per slide. I managed to insert the .mp4 videos and when I export out of HTML5, the first video works fine. While all the other videos does not work. I just hear the sound but can't see the video. Also, if I go back to the first video that was working, it does not yet appear, but I can hear the audio.

  As soon as you have more than 1 video in the project, the first works well the first time that you see, and then if you go back, you hear only the audio, not the images. All other videos in the project does not appear, but you can still hear the audio.

  I use the latest version of Captivate 6, exit to HTML5.

  Thank you!

  Hello

  Welcome to the Adobe Forums.

  Can you please insert the video as the "video event" and then try to publish the HTML 5 output and display the output.

  Also can you please try with any other example of .mp4 file and then view the output as HTML5.

  Thank you

  Loveesh