Satellite A215 - turn trouble

I have a Satellite A215. I have a hard time to start after hitting the power button. Must be done several times. Someone once told me to take out the battery, wait about 15 seconds, put it in and try it. It works sometimes, but it need a solution to this problem without taking out the battery whenever I want to turn on the laptop.

Hi Johnny28,

Strange, but maybe the power button is faulty and needs replacement or a another part, but in fact, my opinion is it s a bad material work because it s not related software problem

In my opinion, it would be best if you contact an authorized service provider because guys can check your laptop if s button power itself or something else. ;)

Tags: Toshiba

Similar Questions

  • Can't turn on my Satellite A215

    Hello

    I have a Toshiba Satellite A215, was used for 1 year and a half. One day, suddenly, he just made a short "pop" sound and crashed. Cannot activate it since then.

    More than that, small fires showing me the connection ca, use of the HDD, etc. battery status are also dead. Normally, the battery one had all the time, even if the laptop is offline. In addition, I noticed that when I plug in the charger, it starts to beep. The charger is very well, it has been tested on other laptops, and I also tried to use another charger for my laptop, without result.
    My warranty is gone, so I can't count on that. I brought the laptop Toshiba official service, they told me that they have to replace the motherboard (it would cost more than a new laptop). They do not work with motherboards, they just replace them.

    My question would be if there is any chance to repair the motherboard (assuming that the power circuit chip is a party, or something like that).
    Someone knows something about it?

    Thank you for your time

    Hello

    Not as good as s, what happened with your laptop, but you could try to remove the battery and the AC adapter, wait an hour and then reconnect the battery and the AC adapter and try it.

    In the worst cases, the motherboard needs to be replaced, and I doubt that the motherboard can be repaired. It's very complicated.

    Welcome them

  • Satellite A215-s4697 - HARD drive round and round

    I have a Satellite A215-s4697. AMD Turion 54 x 2 Dual Core technology tl-52 with 1 GB of ram.
    Windows Vista Edition Home Premium.

    The hard drive on this thing just turns and turns and that the computer is slow.
    Im making here mail web (IE is the only thing that I opened) and it runs without interruption.
    Sometimes the computer crashes then releases sometimes it says: "Windows Explorer has stopped working" and I restart.

    When I plug it to the tv to watch a show off hulu.com, for example, the player can run for 10 minutes before Detroit back work.
    However, then it works. That's so slow that it's frustrating.

    Any ideas.

    I tried the improve performance including removal of old programs, clean disc of deleted files and installers, ect.

    Thank you.

    Hi Seahunt,

    First of all, you must back up all data on the HARD drive. If the disk HARD still turns upward it sounds like this it becomes defective and must be replaced don t store on important data

    You can get a new HDD to a service provider authorized or an another computer store. As much as I now you need a HARD drive with SATA interface.

  • Suspended on Satellite A215-S4767 Vista services

    Satellite A215-S4767 w of Vista SP1 Ultimate. 4 GB memory

    Strange problems begin to occur over the weekend.
    Apps not loading in the taskbar; print drivers, antivirus applications, etc. Made a start with rescue CD and allowed out some malware trouble persists.
    Also, updated Vista SP cannot be installed three times and finally gave up on it. It was a couple of days before, so I don't think that his associates.

    Unable to connect to any wireless or wired network. Seems to hang when I try to run the "network and sharing Center." Many services do not start.
    Cannot run that much control panel apps. For example eventviewer diskmanager, services. They seem to be suspended. Once that happens, I can't close the administrative application.
    Most of the applications that start automatically are not. Printer driver, antivirus Soft,
    Disk mgmt shows never readers; rest to connect to the virtual disk service
    Can not run the system restore. seems to hang. When I try to run it again it says it works already, but I don't see anything.

    Everything seems to work in safe mode.

    Any help.

    I agree with Alex. Operating system must be corrupted and best thing you can do is to clean OS installation and make sure that everything will be OK again.

    Back up all important data and install Vista using livery Toshiba CD/DVD installations.

  • Satellite A215 - fault power

    Hello

    I have a Satellite A215 with what looks like a major problem.

    When I plug in the adapter I get 2 combination of LED on the front to come-
    Sometimes the area of ejection blue light twice then nothing
    Sometimes the sector and the battery light will Flash once then turn on flashes once and then nothing
    sometimes no LED light up at all.

    If the AC adapter is not plugged in about 5 minutes the blue power LED will be finally turns on and stays on.
    Computer laptop don't post, the power button has no effect.

    I tried to remove the battery, ram, HDD, modem and WiFi card so far.

    Anyone have any ideas?

    Hello

    You mean you can't turn on the laptop?
    Nor with the power or the battery using the AC adapter?

    Well, this seems odd and possibly there is something wrong with the electronic power on the mobo but it's only my personal opinion.

    You should try a workaround; remove the battery, disconnect the adapter.
    Then wait about 30 to 60 minutes and reconnect the two part.
    Try to turn on the laptop and test if the laptop would pass the POST correctly.

    If nothing will happen then a serious hardware failure could be possible and I think that in this case only the ASP can be useful.

    Good bye

  • BSOD on Satellite A215-s4697

    I have a Satellite A215-s4697. AMD Turion 54 x 2 Dual Core technology tl-52 with 1 GB of ram.
    Windows Vista Edition Home Premium.

    Thanks to the support here, I ran a check on the HARD drive and it came right back.

    My drive turns LOTS and computer is slow. At the beginning of February and today I got the blue screen and memory dump. Windows tried to fix itself, but could not. Only way to recover was with a system restore.

    Can someone read the .dmp file to give me assistance or other recommendations?

    Thanks again!

    Is clean operating system installation option for you?

  • CPU fan broke on Satellite A215-S7444

    Hello

    My Satellite A215-S7444 CPU fan stopped working which causes my CPU become very hot.

    After 5 minutes of idle my laptop turns off which makes it almost useless to my laptop.
    After reading a few forums, I decided to disassemble my laptop to check that there is no dust or debris obstructing the fan.
    However, I got so far as to take off the keyboard because I didn't know how to take off the high black/silver (please link to image).

    http://I201.Photobucket.com/albums/aa287/istanlfc_album/laptop.jpg

    Could someone please help me with this problem, I use on a daily basis of the laptop and it is important for my studies.
    I don't mind it sends out of Toshiba for repair cost.

    Jin

    Perhaps, you will find it useful:

    http://www.irisvista.com/tech/

    Be careful to disassemble the laptop, there may be hidden media

  • Crazy Vista on Satellite A215-S7437 - how to restore?

    Hello

    I really need help.
    I have a Satellite A215-S7437 and windows Vista is crazy.
    I want to restore the laptop with the recovery partition.

    I have read haved if I want to start with this hidden restore partition that I need to press the 0 button zero when I turn it on.
    But this doesn't work in some way.

    IS THERE ANOTHER WAY TO BOOT FROM THIS PARTITION...?

    need help, help me.

    Hello

    You could try to repair your Vista using the own Vistas called Startup Repair options
    Press and hold the F8 key as your Satellite restarts.

    You need to press F8 before the Windows logo appears. This is important.
    In the Advanced Boot Options screen, use the Repair your computer option, and then press ENTER. Select a keyboard layout, and then click Next.

    The System Recovery Options menu should appear. You must click on startup repair.
    Startup Repair offers various options and there you make a choice to solve the problem.

    Good luck

  • Re: Satellite A215-S7444 just stops after an hour of use

    I have a satellite A215-S7444.
    My problem is that if I'm on the computer after about an hour or two the computer just stops.
    I already tried to change the power settings management that worked for awhile, but my laptop still turns off after a while.

    Hi Patrick

    I'm quite sure that your laptop stops automatically due to the temperature inside the laptop.
    It of a simply overheating issue that could be caused by clogged cooling grids.

    From time to time it s a good idea to clean the fans. Especially dust prevents the cooling modules works correctly, and therefore the temperature rises.

    I made good experiences with the jet of compressed air. These sprays can be purchased from dealers of computer/laptop.
    In addition you could try to google for some online also offers.

    Good bye

  • On Satellite A215 BIOS crash

    Hello!
    I have a Satellite A215-s4747 and updating my bios driver, the computer crashed. Now I can turn on my laptop, but there is nothing. How I can fix this or do I have to reprogram my bios chip, if it can be reprogrammed?

    Thank you

    Hello!

    Yes, the BIOS can be reprogrammed, but this can only an ASP (authorized service provider).

    So go to a local ASP and they can help you.
    In this case, you can do nothing.

    Good bye

  • Toshiba satellite A215 S6816

    I have a Toshiba Satellite A215 S6816 and the DVD rom does not detect the inserted disc. I've already tried Microsoft automated troubleshooting services, but it still does not work. He says that this device is missing and not detected. I wonder ' coz every time I insert the disc I could hear turn but Windows cannot detect the drive. Do I need to install a new DVD driver for my laptop?

    Hello

    The pilot may indeed have a hardware problem and must be replaced.

    Check with the support from Toshiba and their forums for updates firmware and known issues.

    Toshiba - Forums
    http://laptopforums.Toshiba.com/

    Toshiba - Contacts
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

    Toshiba - drivers - access your model
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Toshiba - Support
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    ========================================

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite A215-S4757 blue screen & startup failure after HARD drive partitioning

    I just bought a Satellite A215-S4757 a week ago & I tried to divide my hard drive coz, I was only one partion (250 GB) using acronis disk director.

    After that I got the blue screen and now I failed to start and I tried all the options to repair my windows or load in SafeMode to no avail coz it crashes just from the window of microsoft corporation.

    I tried to reinstall windows vista with the cd but still does not!
    pls someone helo me :(

    Hello

    Creator of disc of Acronis does not for me but I know for sure that you can split the capacity of the HARD drive into two partitions with rendering recovery DVDs. Start your laptop with recovery DVDs and check the option to install it.

    You must have a mobile US model. I am from Europe and I don't know about you how it works with the recovery media in the United States, but it should be similar to the European and because of that it must be an option to divide the capacity of the HARD disk with two partitions.

    Please try again. It should work somehow.

  • Touchpad Satellite A215 - S4747 not continue once the finger reaches the end of the buffer

    I have a Satellite A215-S4747 and have downgraded to XP. Everything is great, but I noticed that my touchpad does not continue when my finger reaches the edge as before.

    I see a Synaptics Touchpad driver in the Device Manager version 10.0.3.2 and dated 27/06/2007. Ideas?

    Hello

    Please, check the touchpad settings and make sure that the configuration is the same as before. I hope that you wrote on the tap zones (each edge is configured as a button). Please do not forget that the tap zones are not enabled.

    In this case, you can use the whole touchpad.

  • Satellite A215-S7444 - freezes after Hibernation mode

    I have a Satellite A215-S7444 which is 2 years. It came with a 32-bit version of Vista. I just do a custom install of Windows7 64 bit. It seems that after coming out of standby the laptop hangs and I have to do a hard reboot.

    Any suggestions would be greatly appreciated. Thanx.

    Hello

    Do you have also installed all the drivers for your laptop from the Web from Toshiba site? Make sure that there is no yellow exclamation point in Device Manager.

    In addition, I would try to update the BIOS. You should find it here:
    http://www.CSD.Toshiba.com > download

    Before the BIOS update, close all running programs and make sure that you are logged on as administrator.

  • ConfigFree Switch Manager does not work on Satellite A215

    Hi, I have a Satellite A215, bought a month ago.
    Yesterday, I received a message and stupidly, I activate a series of programs but I don't know what was the purpose... the fact is that many programs do not run and I receive a report he said thar was a program compatibility in ConfigFre switch Manager.
    He also says:
    Problem event: PCA2
    Signature of the problem 01: CFSwMgr.exe
    Signature of the problem 02: 7.0.1.8
    Signature of the problem 03: ConfigFreeSwitchManager
    Signature of the problem 04: ConfigFree (TM)
    Signature of the problem 05: Toshiba Corporation
    Signature of the 06:200 problem
    Signature of the 07:-1 problem
    Signature of the problem 08: 6.0.6000.2.0.0.768.3
    Signature of the 09:13322 problem

    What can I do, please I really need to work on this emergency! Thank you!!!

    The first thing you can try to remove and reinstall ConfigFree.
    To be honest ConfigFree is one of the best designed Toshiba Utilities and it works very stabile. I really don't understand what you've done. Remove it from the system and install again.

Maybe you are looking for

  • How to start the recovery on Tecra 8000 CD?

    Hello I tried to recover with CD. The manual says hold 'C '. It is not possible to hold 'C' when starting, the beep of the machine and a quick beep.What can I do?Hope someone has maybe had the same problemThank you

  • Laptop HP dm1 NEW OS installation issues

    I just bought a laptop HP Pavilion dm1-4003au with a copy of Windows 7 Home Basic 64-bit installed. I have the standard partitions - C (System) which is GB 278, restore partition, sharing tools HP and a D drive no name that I can not access and gives

  • motorcycle g I can't open my e-mail address. He needs a code I've ever had in a first time. I have my password. Help!

    motorcycle g I can't open my e-mail address.  He needs a code I've ever had in a first time.  I have my password.  Help!

  • Connection to Small Business SERVER 2003 VPN

    Hello I am trying to connect to a SBS 2003 R2 through the VPN server.-Firewall remote (server side) is set to "Pass all"-online port 1723 and all others are open-Local firewall (on customers) are disabled-J' tried with stations W7 SP1, HP and XP Pro

  • Printer does not work properly

    Hello I'm runnning a program as an administrator in my own session (not administrator). When I try to print a document with these programs, it is not printed.It's so strange to me... I think that the printer does not receive the order to print the do