Satellite A300 - 1 c: Vista freezes sometimes

Similar Questions

• Re: Satellite A300-145 with Vista 32 maximum RAM?

  Hi all!

  I have satellite A300-145 with Vista 32 home Premimume - now on laptop installed 2 modules of 1 GB of RAM (for mode dual channel)

  Q: if I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  -May support A300-145 4 GB RAM? and Vista 32? (Intel GM965 chipset have support 4GB RAM)

  Hello

  Satellite A300-145 was equipped with a Mobile Intel GL960 Express Chipset. Or I m wrong?
  AFAIK this chipset provides only the 2 GB support

  > If I replace the RAM to 2 modules of 2 GB of RAM this mode dual channel still & 4 GB RAM?
  32 bit Vista will recognize only about 3.2 GB.

• Satellite A300 - 1 5 - after freeze on Vista eve

  Hello!

  I sometimes have the problem after sleep. When I opened the laptop only can move mouse but can't open anything and Vista freeze. Must turn off the laptop and turns on again.
  I have the latest version of the BIOS.

  How to solve the problem?

  Hello

  I never had this problem on my Satellite A300, but this happens only in sleep or hibernation mode too?

  It's really hard to say why this happens but make sure that you have installed all the software fixes for Vista and maybe you should try to reinstall Vista using Toshiba recovery disc. Maybe an application of part 3 is originally this gel.

• Satellite A300 - Downgrade from Vista to XP

  Hi all
  I just bought a new Satellite A300 laptop, preloaded with VISTA with XP Downgrade option.

  I finished the VISTA (Setup) and the recovery of the DVD. Now, I really want to downgrade to Windows XP, using the supplied with the Toshiba laptop recovery CD, but the instructions are vague.
  I tried F12 at startup and select CD/DVD as the boot, but it seems to hang on the black screen.

  There are files on the disc (3.2 GB) I covered it on another PC. I also tried the option of recovering your system start-up (F8), but it does not determine that the drive is a recovery / disk backup. I don't want to just run right XP installation of my copy of license of Volume for obvious reasons.

  Does anyone have information / procedure on how to switch using the Toshiba provided CD?

  Any help gratefully received.
  With our thanks,
  Stu.

  Hello!

  You hear that the drive reads the disc XP if you boot from it? What is the computer hangs on empty screen or if you get an error message?

  You can boot from another drive? Maybe the downgrade does not work properly or it s a problem with CD/DVD player. Check it!

  Sorry, but at the moment I can t tell more.

  Good bye

• Can I put a Satellite A300-15 b Vista 64-bit?

  Hello

  I think to buy a satellite A300-15B, which sounds like a great machine for the price, but when I asked at the store if I can run Vista 64-bit, they told me that I can't do.

  What is the point of having 4 GB RAM (8 GB disposable?) then?

  Please can someone confirm if I have the opportunity to opt or not? (Living in the United Kingdom)

  Thank you

  Have you checked page under http://eu.computers.toshiba-europe.com drivers download 64-bit Vista and the availability of tools on Toshiba?

  Check if the drivers are available for this model of laptop PSAJ4E.

  > What is the point of having 4 GB RAM
  Good question for Microsoft. ;)

  By the way: is 4 GB maximum RAM capacity for this model of laptop.

• Satellite A300 - keyboard does not work sometimes

  Hello

  the boot of my Toshiba Satellite A300 computer laptop keyboard doesn't work sometimes?

  After a reboot, everything is ok!

  Anyone know why the keyboard does not work sometimes?
  Greetings

  On this virtual path, it is not easy to give you a precise answer, especially if it happens sometimes and I think that you need professional help with this.

  There may be a connection between the keyboard and the motherboard problem.
  I fear, we can only speculate that the problem can be m.

• How to install XP in Satellite A300-1BI with Vista

  Hello

  A few days ago, I bought a Satellite A300-1BI with Windows Vista preinstalled. I don't like this OS and I want to degrade for Windows XP and also install my Ubuntu Linux distribution, but I cannot install lame of them because the hard disk appears as "not connected" on men to install XP and Ubuntu... It seems that the laptop is made ONLY for Vista and I think that it's... pathetic...

  Can someone help me? I tried to search for information on the web, forums, etc., but it seems I'm the only one with this problem.

  Thank you!

  Estemon sorry but I cannot believe that you wrote here. It's more poised to last a year and you can find so many threads here with the same question. In a minute I found, for example, what a http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=35787

  It's Satellite Pro, but the principle remains the same.
  Check it please satellite a category on this forum and you will find answer to your question.

• Satellite A300-IH load Vista slowly

  Hello

  I just bought the laptop satellite A300-IH, but this computer is very slow to load vista Home premium.
  When I turn on my pc, I have to attend 3-4 minutes until I use the pc.

  I have not install the software.

  Help, please!

  Do you know why you Vista to load slowly?
  He starts slowly because of the high level background processes that are loaded at the beginning also.

  All the tools of Toshiba and preinstalled utilities are running in the background and they should be loaded at the beginning to make sure that all the features would be features correctly.

  If you want you can see the msconfig Startup tab and you'll find applications that are run in the context of the operating system.
  If you want, you can disable some but don t wonder if some functions will not work.

  Last but not least an Antivirus program may extend the time of start-up

  Concerning

• Satellite A300 starts after Vista update

  Hello everyone!

  I had a problem with my Satellite A300. After installing Vista updates laptop is restart automatically, so it is not commissioning and screan is black, but buttons is the lighting, the cooler works.

  You have a solution to this problem?

  Hello

  Remove the battery, disconnect the adapter and wait for about 30 minutes.
  Then reconnect both parties and try to turn on the laptop.

  Check it out!

• Satellite A300-1BZ with Vista - Port Com disappeared

  Hello world.

  My first time and I'm a bit of a dunce with technical stuff, so please be gentle with me!

  A300-1BZ with Vista.

  Some time ago I installed "CarSoft V.83" (diagnosis engine) of CD on my laptop. He asked me to check the com port.
  I looked in Device Manager and in the list that I saw "port com 4". OK, we'll go with that then. Everything worked well and I was luckily away talking to my car.

  Yesterday I went to use it for the second time and he says there is an error with the com port and 'check' the com-port.
  So, I got the Device Manager to the top and there is no mention of any com ports in the list! It is the last time I looked, and now he's disappeared!

  I was at a loss what to do, I uninstalled the CarSoft, then re-intsalled once again. Received the same error message.
  Went to Device Manager. Still no com port 4 from the list, or anything that pertains to a com-port.

  I don't know how or if I can get it back.

  Help, please!

  Hi mate

  First of all there is no COM port. The com port that you could see in the Device Manager has been a virtual port created by the software of the car.

  What to say
  I recommend to remove the software of the car of the first installation.
  Then download the CCleaner and clean registry and system entries.
  Restart the computer, and then rerun the CCleaner
  After that, install the software in the car again

  Maybe it helps

• Satellite A300-146 - Original (vista) recovery is necessary

  Dear brothers,

  I lost the original recovery for my labtop Toshiba Satellite A300-146 (formatted) and now windows doesn't work.

  I need the recovery CD if anyone with, please.

  Hello!

  If you have lost the recovery disk you can directly order a new to Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Satellite A300-1mz boot Vista too long

  Hi all...

  I ask for your support for a strange problem that plagues my * a300-1mz * since the first day.
  * The start of the O.S*. (windows vista home edition) * long * for my patience. * Lifetime * is more than * 2 min, 30 sec *.
  Amazing for a dual core2duo and 4 GB of ram.

  The screen * "Please wait" * rest for most of the time.

  I always use the Hibernate feature, but sometimes I have to restart and its duration is too long.
  I ask you a solution.

  Thank you

  Hello

  I advise you to check the programs and utilities in the start option. You can start to type this in RUN msconfig.

  http://img42.imageshack.us/img42/2996/startrup.jpg

  As I now Tempro utility (utility of fingerprints if available) takes enough shortly that it scans for update

  2 defragment your drive with any defragmentator like Diskeeper and Raxco Perfect disk, clean the entire system (registry, remove duplicated files) with software such as Winutility, Tuneup

• Satellite A300 - question about Vista license key

  Hi all,

  I bought an A300-149 with preinstalled Vista.
  One of my friends told me, the partition that was used to install Vista is not useful, it consumes space from my HARD drive, so I deleted the partition and rearranged the partitions that I was going to use them.

  I just found out it's a big mistake to do that, because the contained all partition drivers and Vista with the license key.
  I'm losing my windows license, if I eventually have to reinstall it? (I have the label on the underside of the computer with the key...)
  I can not download the content of this partition (in the form of an ISO standard) somewhere in this site? (and use the key to the label, as it is usually done with the software)

  I paid for this OS... so I don't understand why I have not received a DVD with the software? (When I opened the box, I was looking for the DVD and I wandered why he is missing...)
  It's frustrating...

  Waiting for your answers,
  Thank you

  Hello

  It's really stupid situation now, but certainly not frustrating.
  Here a few facts to better understand:

  New Toshiba laptops are delivered without recovery DVD and images of recovery is recorded on the second partition. All of us must create own recovery media. To do this, this Toshiba has designed little tool called creator of Toshiba recovery disc. With this tool, you can create recovery recovery CD and DVD. When you have these media you can do with the data you want. To install Vista over these media must be used.

  So many people may forget or simply ignore it. Because of this Toshiba has designed reminder with the trace message:

  Because of this, Toshiba has designed little reminder that will be shown in short time after first start with track contents:

  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need repair *.
  * your computer in the restaurant to original factory State, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose 'Repair your computer' *)
  * and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator" to *.
  * ensure hat you are able to restore your computer to the factory installed state, even if your computer is severely damaged.*

  I can't imagine you didn t see.
  In any case, your friend probably has no idea how it works, and now you have a problem.
  To be honest you have no problem, but the additional costs. You can order the following original Toshiba disk link given by Akuma, but you must pay for it.

  Bye and good luck!

• Satellite A300: Move from Vista to Win 7 OS - Upgarde isue

  Hi guys,.

  I have a Satellite A 300 series laptop PC with Vista Home Premium pre-installed.
  I want to swith over to Win7.

  My question:

  (1) if I format 'C' and install Win7 fresh, will I be able to use the recovery disk (stored on 'E') option to boot - recovery option F8 - repair - HDD to swith back to original Vista at any time?

  (2) how to ensure that all drivers in particular for all software from toshiba as "Disc Creator", "WLAN", "BT", 'Recovery disc creator', 'Toshiba DVD Utilities', "System Diagnostics" will be mounted like new?

  Thanks in advance.

  Dimitri

  > 1) if I format 'C' and install Win7 fresh, will be that I can use the recovery disk (stored on 'E') option to boot - recovery option F8 - repair - HDD to swith back to original Vista at any time?

  No, if you install Windows 7 on the C partition would have replaced the old Vista Boot Manager and disk for Vista recovery option will not be available.

  (> 2) how to ensure that all drivers in particular for all software from Toshiba as "Disc Creator", "WLAN", "BT", 'Recovery disc creator', 'Toshiba DVD Utilities', 'System Diagnostics' will be installed as new?

  Well, if you install Windows 7 and then the tools mentioned as Recovery Disc Creator or commercial DVD Toshiba could not be used because these done software part if the image only Toshiba! So if you are using Windows 7, you can buy such tools.
  All other drivers can be downloaded from the European pilot page Toshiba.

• Satellite A300 - screen doesn't work sometimes

  OK so first of all, I wish to begin by saying that I am a complete noob when it comes to computers and also my native language isn't English, but I'll try my best to make you understand my problem.

  Sometimes, when I try to turn on my laptop, the screen will not work. I hear the fan turns, the little lights on the keyboard light up, but the screen remains black... what happened for like 3 days until today, I came home and it worked magically. It is this same as there is a month... What is happening? : s

  On this virtual path, it is not easy to offer the exact diagnosis.
  What we do here is nothing else possible speculations about the reasons.

  A300 is not the most recent model, so there may be a problem with the connection between the motherboard and the display.
  Next time when this happens, try to move the screen or gently press the laptop under the screen just to see if this will help or not.

  In the end, I must say that single service can help you with this. With other words, they can disassemble the laptop and check the display cable.