Satellite A300-177: XD cards are not recognized

Similar Questions

• SD memory cards are not recognized on satellite A200

  Hello!

  I had a Satellite A200 installed with Vista.
  When I insert the SD card into the laptop, nothing happens. My SD card does not seem to be recognized by the system.
  I tried to different maps, but none of them have been recognized.
  SD host controller is listed correctly in the Device Manager.
  I don't know what happened, but there is no problem with SD cards before you recognize.

  Thanks in advance!

  Hi there, my suggestion would be first uninstall and then reinstall the drivers from your SD controller (available for your laptop model on your regional site of Toshiba drivers). If this does not resolve the problem, then visit the following link to download an update to enable playback of higher capacity SD cards under Windows Vista: http://www.microsoft.com/downloads/details.aspx?FamilyID=e42fc131-6a76-4b27-934a-fb19dd323dab&DisplayLang=en if this fails, then make sure that you are upgraded to Service Pack 1 of Windows Vista.

  I hope this helps

• Satellite A300-1MX - sound & video are not in sync and video lag

  Hey everybody,

  I bought a new Toshiba Satellite A300-1MX two days ago and had installed XP on it with Service Pack 3. I only noticed now that I tried to play a video that I took with my camera it was very laggy, the audio and video are out of sync and the video is laggy. It can t be my camera because this has happened also with the built-in webcam, and my office is my cameras back common videos.

  Does anyone have a solution?

  Thank you
  Sascha

  Hello

  I wonder if you have installed a necessary codex.

  I installed K-Lite Mega Codec package on my laptop.
  This codec package contains all the required and necessary codec s.

  I recommend installing and then try to use VLC Player to run tests.

  Welcome them

• Satellite L735 - wireless network card is not recognized after installing OS own

  Dear Sir.

  I have the computer laptop satellite L735-M14X part #: PSK0CE-04X01RAR, SERIAL No.: YB321818W
  My laptop was windows Home premium 64-bit Arabic and very slow and I wanted ultimate English so I did a format and installed win 7 ultimate 64-bit, and after I installed all the drivers shown in the attached picture 4

  but wifi still doesn't work do not for a wireless internet connection! (I updated the bios from 1.8 to 2.2 and installed the package of value added and activated the wireless but not active)

  so I noticed that there are 2 drivers to lack as in the attached photo 1 & 3 picture and I have not found the required software for them.

  also when I was installing the driver 'widipl-20110323155916', is a problem then please check the image2

  Please find a good solution without recovery!

  Waiting for your help earlier and support

  Photo 1
  [http://forums.toshiba.com/tshb/attachments/tshb/brd_network/14337/1/1.png]

  Photo 2
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/2/2.PNG

  Photo 3
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/3/3.PNG

  Photo 4
  http://forums.Toshiba.com/tshb/attachments/tshb/brd_network/14337/4/4.PNG

  According to the specifications of the laptop your laptop doesn't have Intel WLAN card. It has Atheros WLAN card inside, please try to install the driver gate Atheros WLAN Toshiba - http://aps2.toshiba-tro.de/wlan/

  Please post comments.

• Satellite 5005-S504 - peripheral USB are not recognized

  Hello

  with my laptop older, one Satellite 5005-S504, I recently problems with the USB ports. None of the three ports detects a USB device. Device Manager does not indicate a problem on the host controller or root hub.

  I am running Windows XP, SP3 and there was no recent updates to be identified as the cause of this dysfunction.

  Suspicion over there?
  Is there a driver available that could help?

  Thanks in advance!

  TH

  Hello

  The USB ports are listed in the Device Manager or not?
  If so, I'll try to remove them and restart the laptop. After that the ports will automatically install again.

  If it doesn't work, you can try updating the chipset driver. Take a look on the Web from Toshiba site to download.

• Satellite A300 - Cd/Dvd drive is not recognized by Windows

  My cd/dvd drive has stopped being recognized by windows (7). I don't know what has caused this because he previously worked and allowed me to install office 2010.
  There seems to be no restore point shown around where he was working.

  Check the Device Manager please.
  Optical disc correctly listed or may be listed as unknown device drive?

• How to use PCMCIA card in Satellite A300-177?

  I recently bought a PCMCIA Wireless for my laptop Satellite A300-177 and when I went to fit it has discovered that they are now using the Express card.

  I was wondering would this converter made http://www.roalan.com/expresscard_to_pcmcia_cardbus.htm.
  I know it sounds kinda obivous but with companies these days you never know if the conections are the same, although they share the same name.

  Hello

  Is your laptop delivered without WLAN card or you want to use the faster wireless network card?

  The compatibility of the adapter may confirm the manufacturer itself. They must offer specifications for clean products.

  In any case, I think that your laptop has WIFI on board and I don't see the reason to have this much extra. Sorry, but it looks impressive to me. I can understand that you do because the laptop is free WIFI but... I do not know.

• Satellite M70: DL - DVD are not recognized on Pioneer DVR-K16S

  My DVD player does not recognize DL media (this device is compatible DL) so I can't burn this type of DVD, that someone can tell me why? all other media CD and DVD works great. I can write and read, but with DL, I can't write because this type of media are not recognized. I tried to find information and driver and firmware on the internet, but I can't find note on DVR-K16s pilot.

  I have a satellite M70

  Best regards.

  Hello

  According to the specifications of the Satellite M70, it should be possible to burn the DL DVD.
  It's not easy to say why you can't burn your DL media.
  You know that not all readers to support all of the CD and DVD.
  A friend of mine tried to use DL media. There were also some problems with another drive.
  I recommend that you test some DL media.

• The Internet-related problems with the Satellite A300-177

  Hi - I was wondering if anyone can help?
  I just got a Satellite A300-177, however when I connect it to the internet (I tried broadband wireless and mobile) images and low resolution is pixelated. I think that sometimes happens, but there is usually an option on a laptop to remedy (to do with disabling the option of your laptop, save images low resolution to run faster) however this particular model does not seem to have this option (as tested by our technician COMPUTER)!

  Please can someone tell me if they have the same problem before I return it because I like really this laptop apart from that!
  Thank you!

  This part of the operating system or Internet Explorer option? This option does not for me because I never noticed anything like that.
  I also believe that the COMPUTER technician knows the difference between the responsibility of Toshiba and Microsoft. If this option is part of the operating system or THE Toshiba has nothing to do with this and you should check the Microsoft Knowledge base to see if there is a report thereon or similar problems.

  If you find more on this topic please let us know.

• Used the update and now the video card is not recognized

  I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized.  I get the BIOS beep code for no video card or bad video memory.  I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
   
  System-Vista Home Premium 64-bit
  Palit-card nVidia GeForce 9600 GT graphics card

  Oh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.

  Hi JohnyDick,

  This problem seems to be due to the updates of Windows, although it could be a coincidence.
  I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
   
  If the problem persists then I recommend you to contact the computer manufacturer for assistance.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cc of Lightroom will not import my files, it is said that they are not recognized, why it doesn't matter that a DNG and not a raw file, I use a canon 5 3

  Can someone tell me why Lightroom cc wants to import my files under a DNG, I used to import as a raw file, it says the files are not recognized, I use a Canon 5 3 and never had the problem before, he said actually the Raw Format is not supported in Lightroom.

  Thanks in advance John.

  Hi, dj_paige,

  I managed to sort it out, the problem was when I used my Kingston card reader to import my images in LR Cc, it would not recognize the file format, so when I thought a little more, tired of importing directly from my 5 d 3, it worked very well, so now I need to find a card reader supports LR CC ,

  Thanks for your reply, regards, John.

• HDD and dvd are not recognized in the configuration menu, what could be the problem?

  The hard drive and dvd drive are not recognized on the configuration menu for my desktop Pavilion a4316f.  What is a controller failure?  A PCI controller can be used to replace the motherboard controller?

  dhobs,

  Anguish, that the suffering of the faulty motherboard has been aggravated by your actions. Why you decided to perform a restore (which re - formate the disk, erase all your data files (documents, photos, videos to misic,) is really amazing.)

  You had a viable BONE, work and the data store. You he clobbered with recovery. As explained, the 'tattoo' reads the embedded hardware configuration and will stop at the resumption of treatment if it detects a change.

  Only temporary help I can offer is to open the computer case and install a small 12v on the NVidia chip fan. IF the chip is not 100% burned, you can earn low enough time to reinstall the operating system and then add the map.

• Tecra 8000: PC Wireless Card is not recognized

  I am trying to conect my Tecra 8000 to my wireless router, but the card is not recognized when I plug it into the laptop, it is recognized in my satelite. I tried running windows 98 and 2000 now but its made no difference.

  Is there anything else I should do?

  Hello

  What wireless card did you use? Maybe the Tecra 8000 doesn t support this card.
  Check you manual user for the supported cards and compatible.

• SatPro A10 - wireless network card is not recognized

  I recently bought a wifi minipci card for my A10. After installing the card I have powerd up and the card was not recognized by windows, which is nothing to add material etc.
  I am running XP Home Edition with service pack 1, and I don't think that the machine is ready wireless.

  Salvation will be

  According to the specification of the A10 SP is WLAN ready. Did you find a WiFi (black and white) antenna cable near the card slot?

  Please check device manager if there is an unknown device, as well as the entries under network adapters.

• Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  Elgato EyeTV - I copied my recordings on another external hard drive, assigned to this disk as the location of the Archive, restarted the computer, but the location of unpublished/are not recognized. (End of 2006 Intel iMac / OSX 10.7.5 Lion)

  What do you mean by "assigned to this disk as the location of the Archive" is this something to do with the software you use?

  The drive is formatted for Mac?  Menu go to menu, click Finder go > utilities > disk utility > click on external drives partition - format it sets out Mac OS X extended.   Otherwise, to save the files on the disk and ease than Mac OS