Satellite A300-1EH self wake up about 5-20 min from Turn-off

Similar Questions

• Satellite A300-1EH - where to find the key for Microsoft Works?

  Satellite A300-1EH

  My laptop has been repaired. Exchange service throughout the system. I have serious problem since then.
  The new version of Microsoft Works requires me 25 - the key of the product registration. I don't have him. Where can I get this version, the product key?

  It did not help me Microsoft or service. They sent me manufacturer...

  Hello!

  You have installed a newer version of Microsoft Works? Normally, you can only use the version preinstalled work and so you do not need a key. It s already active and ready to use.

  I think you use HARD drive recovery option to get a working dos version Works. :(

  Good bye

• My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  My Ipad air2 does not start.  Tried hold it together switch with on/off switch.  Apple logo appears for about 15 seconds and then turns off again.

  Is there another way to start the IPAD?

  Try the steps here:

  https://support.Apple.com/en-us/HT201412

• Satellite A300: Option to "Wake on Wireless LAN" disabled in the BIOS

  Hello

  I have a laptop Satellite A300-230 and in the BIOS, the option (under Advanced) to toggle the * Wake on Wireless LAN * is disabled and grayed out with no way to change it.

  Why is it so? How can I activate it?

  BIOS version is 2.20 (later).

  Thank you all.

  Hello

  I have no idea why its grey in my case, I can enable and disable this option
  But I can do that too in utility Toshiba HWSetup located in all programs-> Toshiba Europe GmbH

  You can activate this using this tool?

• Satellite L20: Can I disconnect devices such as USB mouse without turning off the power?

  Hi all.
  I am owner of laptop Satellite L20. I always turned off power to my computer when I need to connect or disconnect a USB device. Some devices have a special icon on the toolbar disconnect them, but some don't (FDD USB or flash drives). Can I disconnect and connect devices such as mouse USB or Scanner wihtout turning off the power?

  Hello

  You can disconnect the external USB devices without turning off the unit, but you must use the option "remove hardware" before you cut the material.
  The icon "Remove hardware" usually appears with resources such as hard drives or USB key have the ability to buffer data. It of necessary for this buffer to the device before emptying it is disconnected

• Satellite P300 - 20 H refresh the screen every 10 minutes and turn off during 3 sec

  Hey,.

  Basically, I bought my P300 Sat about a month previously and each time it runs, battery, the same error will occur...
  It will update the screen every 10 minutes or more and turn off for 2-3 seconds.

  This isn't a big problem, but it is annoying that I can not sort.
  I tried to run a check of problem to find a solution, but he says that he can not find a.

  Help, please
  Thank you.

  Hello!

  Can you please explain what you mean with refresh? And what exactly is happening?

  It is not easy to say what the reason is for this, but have tested an external monitor on the laptop? And you can determine if it s a problem with the internal display or not.

  In addition, you must make sure that you have installed the latest display driver and BIOS. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you installed a display driver Toshiba not you should remove it. These display drivers can often cause problems and don t have protection against overheating.

  Good bye

• Satellite A300-15j-no wake mode from 'sleep'

  Hello

  I just bought my computer about 1 week ago. Sometimes I tried to sleep, he did not resume the return or wake up. The power light is still on. The fan is always on.

  The screen is black and does not. I can only restart the computer every time that happens.

  Please, give me some advice.

  Hi, I have the same problem. But I noteced, it happened when the laptop is to connect to the LAN. If there is resolve, please give me know.
  [email protected]

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• Satellite A300-1EH - Webcam driver open fail

  After the disk format (recovery disc HARD T, Vista 32 b) there is no aplication «toshiba face recognition»
  After installation of Camera Assistant Software, it has that error: Webcam driver open fail. Please restart camera or computer.
  Camera is off and I can't turn it on, by restarting the computer gives no effect.

  Could someone help me?

  Hello

  I see you are using Vista
  Well, first you must make sure that Vista is up-to-date!
  You used the recovery and that means that Vista needs to be updated to the latest state!
  All the service packs and other patches must be installed.

  Then remove the software of the webcam of the system, clean the base registry (CCleaner, etc.) and after reboot again trying to reinstall the webcam software

• Satellite Pro S500-139 - FN + F9 key does not have to turn off the touchpad

  Hello

  I use a Satellite Pro S500-139 and am having problems with my F9 key. When I tap my palm touches the mouse and send the cursor somewhere else on the page. I reinstalled the ALPS pointing device and now have access to the Advanced setting that I was not able to get.

  Although I can set the sensitivity etc. I would really be able to use the shortcut to disable the mouse momentarily while typing. My keyboard shows that, if I press fn and F9 the i should be able to disable the mouse but the function does not work. F9 all other functions seem to work.

  Do you know if there is a solution to this?

  I am running windows 7 pro 32-bit service pack 1.

  What you can try is to reinstall extra package from Toshiba.

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Satellite Pro L20 serches for WLan always same WLan switch is turned OFF

  Even with the wireless button on the front of my L20 in the off position whenever I turn on the laptop, he's trying to find a wireless network. (XP Professional)

  Is anyway then it only the trys to a wireless network when the button is clicked?

  Thank you

  Stem

  Hello

  It's strange, but what message you get Windows exactly?
  If I disable the WIFI using the hardware switch I get only the message that the portable peut t connect to my preferred wireless network but all that s.

  An alternative you can also disable/enable WLAN using FN + F8 key combination.
  In addition, I would try to update the driver WLAN you can find on the Toshiba site.

  Good luck! :)

• Satellite A300 - new battery compatibility problem

  Hello

  My apologies if this question is in the wrong part of the forum but I need help with a problem of battery for my Toshiba laptop.

  I have a Satellite A300 and did it for about 4 years.
  Battery recently not to organize free and put this up to age so I ordered a new online.
  My previous battery had issue PA3534U-1BRS DC 10.8V and 4000 mAh and my new battery PA3534U-1BRS DC 10.8V and 4000 mAh.

  The problem is that the computer does not seem to like it.
  If I put the battery and connect the power adapter red battery icon will show and stay for about 5 minutes before you start to Flash.
  When I turn on the computer and log on to the computer displays "battery not detected" in the battery in the tool bar icon.
  I couldn't so far to charge the battery.

  What I am doing wrong? Any ideas on how I can get around this?

  Any help gratefully received

  Thank you

  Hello

  First of all there are no many things that must be done if you replace the battery.
  The new battery should be automatically recognized by laptop and the Windows System.
  If it s not the case, then the battery is not completely compatible or malfunctioning.

  There are several batteries on the market; origin and original parts parts
  I recommend buying an original Toshiba Toshiba service block in your country.
  In this case, you can be sure that you bought a fair and good share for your laptop to 100%.

• Satellite A300-1EC - how to start openSuse Linux from USB HDD?

  Using the desktop PC, USB HDD was installed openSUSE. The computer starts from USB HDD fine. On the laptop installed windows 7. I tied USB HDD for notebook and laptop computer reboot, select by pressing F12 boot USB, but the HARD drive loading specifications internal (WIN 7).

  What I've done wrong? How can I boot from USB HDD?

  Hi aliks-os.

  I m not owner of the Satellite A300, but maybe that it doesn't support boot from USB HDD...
  Connect the HARD drive before you turn on your laptop. Then turn on your notebook and press F12 to access the start menu.

  The USB HDD is listed? Can choose you?

• Re: Satellite A300-243 - updated after the BIOS, it did not work

  Dear members...

  Good day...

  I have a problem with Toshiba Satellite A300-243, I installed the Bios after you download from Toshiba Web site, and when it's over, he restarted the machine and did not work, just turned on.

  So if any body can help me to solve this problem, I'm happy.

  Thank you...

  Hello

  It looks like that the BIOS update has no...

  What can you do now?
  Yourself you can do nothing. The only change is the authorized service provider. Technicians can try to reflash the ROM module

  Sorry mate, but in this case you need professional help.