Satellite A300 - N20 PSAGUE FN - keys do not work on Windows XP

Similar Questions

• Satellite A300 - 1 DG-easy keys do not work on Windows 7

  My easy key do not work, but are the fn keys. I installed all the drivers for Windows 7 64 bit and that they still do not work?

  Help, please

  Hello

  Did you upgrade or clean installation?

• Satellite A300 - 20 p: FN keys do not work with Win 7

  FN keys do not work on win7 satellite A300 20 p

  Hello

  Have you installed the added value package as well?
  This because this package is required for some features to work.

  In addition, you should go to Toshiba-> Flash cards and need to check if the flash card function is enabled

• Satellite A300 - FN and multimedia keys do not work

  I have problem with special function on toshiba a300.
  My special function keyboard don't work not (F1... F12) and multimedia tulbard not work too
  Can u tell me what I need to install drivers?

  Hi mate

  What Sat A300 do you have exactly?
  What operating system do you use?

  Have you visited the page of the Toshiba driver and downloaded all the drivers available?
  If this is not the case, this!

• Satellite A200-1FL (PSAE6) - FN key does not work on Windows 7

  I have just installed Windows 7 on my laptop and I can't do touchpad Fn key works. I tried to install the drivers from the Synaptics touchpad, but it does not work.

  What can I do?

  Hi navarone_1,

  This means that the work of FN keys and you can t use the pad touch, right?

  Well, in this case I think that the touchpad is disabled with FN + F9 key combination and therefore, you must install the Toshiba tools to activate the FN keys.

  You can find all the drivers and tools for your laptop on the Toshiba official European page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  You need Support Flash Cards of value added and utility package. These two tools should be released for Windows 7. For Windows 7 32 bit, you can find package of added value but Flash cards Support utility you must download it from another laptop, e. g. Satellite P500. It should work on your model too.

  Last but not less than first installation package of added value and Flash then cards support utility.

• Satellite A300-1J1 - some FN keys do not work

  My FN key seems to have broken the half.

  When I press on it that the icons would be usually displayed on top of my screen now it doesn't and all the function keys F1 F2 F3 etc work with key except F4 which hibernates the computer, also light turn on under F10 if that helps.

  Can someone tell me how to solve this problem?

  Thank you

  Hello

  What operating system do you use?

  I doubt that it is a hardware problem because FN + F4 works and put the computer into hibernation.

  If you use Vista, you need to reinstall the Toshiba value added Package.
  If you are using XP, you must reinstall the Hotkey excessively.

  Good bye

• Satellite L300-164: some FN keys do not work

  I have laptop Toshiba Satellite Pro L300-164 30 and I have problems with FN keys do not work: F6 and F7 doesn't control brightness, F2 is not change power mode and F9 switch touchpad power (of course I pressed FN) and I tried to download hotkey on your site but still does not.

  When installing the program, I see this window (TOSHIBA common Module not found! put an end to this installer)

  Please help me I have 30 laptop Satellite Pro L300-164.

  Hello

  He must choose the Satellite A300 PSLBDE show and install first the common Modules, then software like:
  Hotkey Utility
  Press the start/stop utility
  Energy-saving

  But the common Modules is the essential software that must be installed first!

• Satellite Pro A200 - Fn keys does not work with Windows Vista

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
  BIOS version is now 2.20 - WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]

  After the installation of the operating system, I installed "Value package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) that contains the "utility Flash Cards". In my understanding, the installation of the "value added package" should allow the use of Fn keys.
  This doesn't seem to be true or not true.

  Here's what's happening.

  -Prior to installation of the 'value-added' package, all Fn keys did not work.
  -After installation of the "value added package", if the process of TCrdMain.exe is running, all Fn keys do not work.
  -If I remove the startup TCrdMain.exe and I restart the PC, only a few keys Fn function (Fn + ESC, Fn + F1).

  There is no way (or I have not found a way) for all keys Fn works.

  Someone knows how to fix this?

  Thanks in advance,

  mme000

  I am not sure, but it may be because of the SP1. I installed Vista Ultimate on A200 and stuff all listed (drivers, tools and utilities) from Toshiba support page.

  Contains your Vista DVD facilities SP1 or you install on your own? If you install Vista Ultimate Edition (without SP1) and all the stuff on the Toshiba support site order Instructions of facilities.

• Satellite A350-13 a - function keys does not work

  I have the Satellite A350-13. I installed Windows 7 for 2 weeks.

  The function keys does not work although I have installed the Toshiba value added package, which is responsible for the activation of the function keys.

  What the solution to this problem?

  > Function keys does not work although I have installed the toshiba value added package, which is responsible for the activation of the function keys

  Next to the VAP (value added package) you need to install the Flash Utility card support!
  Card Flash utility support controls the keys FN and not the VAP! But VAP is also needed.

  Good bye

• Satellite M30-S350. Fn keys do not work after reinstalling the operating system

  I reinstalled the system on my laptop and now the Fn keys do not work. How do adjust me them? And yet... How to disconnect the touchpad?

  Hello

  It seems that what he is an American unit and was designed specially for the American market.

  But have you used the Toshiba Recovery CD?
  If this isn't the case, then you must install all the drivers Toshiba and utilities in the correct order.
  Chipset utility
  common modules
  graphic driver
  etc.

  The FN keys supports different function. To use these options, you will need several drivers. For example, use the FN + F5 (the display switching), to the Toshiba Hotkey Utility to display the devices & Toshiba display device change Utility and toggle the Touchpad to install Toshiba Touchpad enable/disable utility

  As you can see it good drivers are needed. Please visit the Toshiba us and download the right driver for this laptop

• Satellite Pro L300 some FN keys do not work on XP

  I bought a L300-164 on Monday. However, there is no preinstalled opsys. I installed a Win XPSP2 (HUN) on it and downloaded the drivers from www.toshiba-europe.com.

  First I have installed chipset and video drivers, then I installed "common Modules". After you finished and restart I tried to install 'orders', but who says "common modules" are not installed.

  So I installed 'save energy' and tried to install it once more the 'controls '. Now, it has been installed normally. Finally, I put on "hotkey utility" and "touchpad utility power. So everything seems to be all right on the machine, but a few FN keys do not work: F6 and F7 doesn't control brightness, F2 is not change power mode and F9 switch touchpad power (of course in a hurry with the FN). However, volume knob works, ESC as the work of mute and Fx buttons also work elsewhere.

  Y at - it ideas to make these buttons work?

  Sat L300-164 seems to belong to the PSLBDE series, and you must download and use the drivers from the Toshiba European designed for the series Sat L300 PSLBDE page.

  Is the common Modules is a key driver that is important for the functionality of the FN button.

  I would recommend so reinstall the common modules again!

  Welcome them

• Satellite A100 - 369 (PSAARE) - Fn keys do not work with XP

  Hello
  I have an A100-369 (PSAARE) I had Vista and I installed XP.
  I have download all the drivers for my pc from this site and I have installed all. (Hotkey Utility, included)
  and everything works perfectly.
  I have not updated my bios again.
  My Fn key does not work.
  I need to update the Bios? I already have the download (bios - 20071126124517.zip)
  I might of to do this by myself?

  Thank you!

  The update of the BIOS is always risky!
  But if you use good BIOS and the good BIOS update procedure so that there should be no problem.

  I think the keys FN don t work because the BIOS does not support on XP or because the tools and the correct drivers are missing.
  After you have updated the BIOS, you must install all the drivers Toshiba XP and utilities in the right order!

  The correct order is mentioned in the installation instructions txt file located on the page of Toshiba Europe.

  Good luck

• Re: Satellite Pro A200-1NB - Fn keys do not work after installing XP

  Dear all,

  I bought the new laptop A200 1NB.
  Yesterday I have downgrade from Vista to XP everything is fine.

  But a problem arose, some of FN + F key do not work, F5, F6, F7, F8, etc. (FN + ESC, F1, F3 work there).
  Can you tell me what is wrong with my pc and how can solve this problem?

  In the meantime your ASAP solutions,
  Thanks in advance...

  You must update the BIOS to the version of XP, and you must install all available Toshiba XP drivers and utilities.
  It's a secret all ;)

• Re: Satellite P200D - functions FN keys do not work on Windows 7

  Recently, I installed Windows7 ultimate 32 bit for my pc, but the function FN key does not work. I installed the VAD latest version 1.4 (for windows 7) as also the utility of the memory flash card (for vista than windows 7 does not have) as suggested in other threads, but the button still refuses to cooperate with me. The flash memory card are current running ok but only with the mouse. to all my startup programs are running ok and I also try Msconfig restart the map flash several times.

  What other driver must try?

  Once my configuration is complete (hopefully soon) what can I do I have recovery disk, I don't have to spend all those torture?

  In my opinion, you've tried everything to make it work. What happens if you try to install Vap for Vista (not for win 7, as you have it installed)?

• Satellite L505 - 10 M - FN keys do not work

  On my Satellite L505 - 10M, the FN keys no longer work.
  I downloaded vap - 20091202163002.zip and let him remove all.
  Turn it back on. VAP reinstalled and SCCF-20091202161105. Zip again.
  Turn it back on. FN keys still don't work!

  Only an icon of FN is added in the field of system without response on the left or right click.
  Still, something else must be mistaken. But what?

  arnold12

  When you open the settings of Flashcards and enable the option allow the mouse to make the maps you can see maps flash when you move the mouse to the top of the screen?