Satellite A300D - funktion scroll Mouse pad does not work

Similar Questions

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.

• Satellite L775 - mouse pad does not work properly

  I have a laptop Toshiba Satellite L775. I run Win 7 Home Premium. My mouse pad does not work properly. I also have a Logitech Anywhere MX wireless mouse. I tried the mouse pad to work properly with the key FN and F9, but it does not work. And you really have no idea if that turns or out of the mousepad anyway, subj for another time I guess.

  What does not work, but I have to do is to go to Control Panel then mouse option load that and just scroll the tabs without changing what each time and then close and the touch pad works. But only for this session. If I have my laptop nearby, or turn it off, I have to start throughout the whole process.

  What's past and how to fix this?

  Thank you very much.

  > What's past and how to fix this?
  After reading your ad, I still don t know what is your problem.
  > My mouse pad is not working properly
  How to understand this? What does not work properly? What happen exactly when you start your laptop?

• My built in mouse pad does not work

  My built in touch pad does not work.  How can I solve this problem?

  Hi LisaGreenberg,

  I'm sorry to hear that you're having trouble with the mouse pad.

  Before you start with the troubleshooting steps, I would like to ask you a few questions.

  (1) Windows operating system you are using?

  (2) what is the brand and model of the computer?

  (3) you receive any code or an error message when you try to use the mouse pad?

  (4) have you made no changes before the show?

  Please follow the link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/nl-BE/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Please answer we help you solve the problem as soon as possible.

• Satellite P750-136 - left mouse button does not work

  I don't understand what the problem is. My left mouse button does not work. If I put a little pressure on the Panel located under the button space then the left button of the mouse works.

  What should I do? It feels like a hardware problem, since I bought the laptop in November my laptop is still covered by the warranty.

  What you can do is to check the touchpad settings and make sure that everything is OK.
  I'm don't know if you noticed this since day 1, but if you think it is hardware problem I recommend you contact the nearest Toshiba service provider as soon as possible. Warranty will cover all repair costs.

• Qosmio X 870 - mouse pad does not work properly

  Hello

  My mouse pad is facing upward and I don't know why. It works when I restart the laptop, then after a few minutes, it does not at all. I checked the properties in Device Manager and it says it works properly... which is not the case. I uninstalled the driver and reinstalled. He always does.

  Not sure if this is related to some of my key of F does not not to my other thread - https://forum.toshiba.eu/showthread...ns-not-working

  A question I've had for a while (which may or may not be related) is my TOSHIBA x 64 compatible ACPI logical value and general-purpose device has a problem. On the device manager says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ». I uninstalled and reinstalled this with driver Toshiba utility pack and it always happens with this error. I cleaned the registry several times using tuneup utilities 2013. It is probably not bound as it has been like this for a long time with no obvious side effects. But it's annoying nevertheless.

  Maybe windows 10 could save the day (I'm on the 8.1). I hope. In the meantime if anyone has any suggestions I would be very happy.

  Good, someone else who might find this is useful - it turns out that it was a hardware failure. My laptop hinge was loose, and therefore the case had to be replaced. He also replaced the mouse pad - now it works fine.

• Satellite A300D - 15 c - FN key does not work

  Hello. I have a problem with the FN key. It doesen't work. When I press the FN key it should appear something on the screen indicating that each FN key (F1, F2, F3, etc.) can do (for example toggle Bluetooth, Wlan, etc.), but it doesn't. Anyone know why it does not work?

  The laptop is a Satellite A300D - 15 c with the Swedish version of Windows Vista Home Premium SP2.

  Sorry for my bad English. I'm Swedish.

  Toshiba value added Package allows to FlashCards, then go to the Toshiba website and download PVAT for your model.

• Mouse pad does not work properly

  I bought my laptop toshiba 2 moths ago, but yesterday, my mouse pad no longer works correctly.

  I can still use it to move the arrow on the screen but cannot use it to doubleclick on something else.
  I need to use it in conjunction with my left hand button which is very frustrating.

  I was wondering if anyone had any ideas how to solve this problem, thanks

  On this virtual path, it is not easy to understand what is the problem there. It is not easy to tell if problem described is related to the touchpad software.

  Try to do system restore and roll back the OS a few days back and check if the same problem persists.

  By the way: which laptop model you have and what operating system are you using?

• Mouse/mouse pad does not work on my Satellite M30X

  Hello

  I started having problems with mouse pad & mouse on a Satellite M30X. By clicking on the icons on the Desktop gives erratic results as evil etc start application and does not. The operating system has been reinstalled with a new hard drive and put BIOS up to date without success.

  Looks like maybe the motherboard has everyone seen elsewhere... and have the solution.

  At soon Scottie

  Hello

  tried with a few external mouse/keyboard? If it is not already then try and check the what happening. In both cases I suggest to contact a local for a hardwarecheckup servicepartner, because your question seems serious and cannot be resolved with software, DO-IT-YOURSELF tips or things.

  Here´s a link to find the nearest servicepartner in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Would be better to let a few technicians do their work ;)
  Welcome them

• Mouse pad does not work on Satellite C855-13D

  Hi, I have a SATELLITE C855 - 13 T.

  I got the TI monthly and now the mouse pad stopped working. Both the touchpad and and right/left clicks don't work. I managed to connect an external mouse on the USB port that works very well. I restarted the laptop several times and also checked the settings of Control Panel-mouse, which indicates that the device Touchpad works properly. I also checked the option to disable the external internal when device is connected is also unchecked.

  I would be very grateful if anyone has any advice on how to get this working again.

  Thank you very much

  To be honest all you've done is just. You need to check if the touchpad is disabled somehow but if everything seems to be on the last and final test you can do is to install original recovery image and test the feature with the factory settings.

  OK, it's a method more radical but more effective to check the operation of the equipment.

  Please post a feedback about your decision what to do and result about if you try to check with the factory settings.

• mouse pad does not work anymore

  Hello

  I had to take my laptop to Best Buy three times already in the last month because it stops just to work.  They insisted it was not a problem of HP or material and suggested that contact Microsoft because their suspicions, it's when a certain update comes through, it will start on the cushion.  Could this be true?  And, if so, why is that happening?  I don't know what specifically does update, nor do I have the time to find out.  In addition, I don't want to update the drivers EVERY TIME that happens to get my pad works again.  This is ridiculous.  I didn't buy this laptop with an eventuality I have to constantly update the drivers when Microsoft sends updates.

  Please notify.

  Thank you.

  TERI

  Hello

  You can contact HP directly, if it is still under warranty factory... usually 1 year... They may be able to help without worrying because you have a warranty extended through BestBuy.

  I have just returned your laptop to HP for touchpad\mousepad problems...

  My question is a little different in this mine worked, but did not work properly...

  When I tried to move the pointer, he'd try to scroll instead, or bring up the right-click menu.

  Sensitivity fluctuate wildly from extremely sensitive, to the point that tapping on it would not make a selection, and I have to use a button...

  Your most likely machine uses a Synaptics Touchpad. I tried all the drivers available. Some work better than others, but all have the same problem.

  A HP technician informed me that it was probably a defective touchpad, or possibly to the main Board of the laptop...  The touchpad feels a bit distorted, as it has a hump in the Center...

  It is with Windows 7 Pro SP1, not of Windows 8 and before Windows updates have been installed.

  It is possible that Win 8 is somehow causing the problem, but my guess is that it's a hardware problem like mine.

  For one thing... If the cushion sensor sends the wrong signal drivers not detect properly.

  Sometimes reinstalling drivers will fix it temporarily, but it will not happen...

  BTW... There is a setting that activates the light or not. Even if the light goes out it comes on briefly when you start the machine, and then after maybe 30 seconds it turns off... It is a function of energy saving do not use light.

  Try to uninstall the drivers and restart the computer... It will then use Microsoft drivers instead of the custom. None of the gestures will work, but the pointer and buttons should... just as a test.

  You can also consider getting a USB mouse, if it isn't to inconveinent. At least until you get a fix.

• Satellite A300D-11 t - external microphone does not work

  Hello.

  I have the Satellite A300D-11 t, Windows Vista HP 32 bit SP1.
  After almost a year of functioning of the system, Vista decided to fail. So I reinstalled it.

  I downloaded all the necessary drivers and forgive me - no unnecessary waste, such as + help +, + acoustic silencer +, + Config Free + and so now (surprisingly fan slowed down and all the computer is colder).

  Now. When I plug the headphones with built-in microphone system does not automatically switch on this one.
  In + Control Panel / sounds + I can see that I plugged it, I can do a test and the test itself works perfectly with a helmet but + recognition + however receives sound from microphone.

  Also when music plays of any player, plug the headphones does not switch anything - music plays again from built-in speakers. The same situation with + Skype + and change any setting does not help.

  Initially, I forgot to install the audio drivers because Windows has done it for me, but adding it did not improve the situation.

  I'm starting to think that maybe I didn't install anything. Here's what I have so far:
  -lan drv - 20080715144843
  -modem drv - 20080403094119
  -realtek wlan drv - 6115011122008
  -utils sd card - 20080715144653
  -sd media flash drv - 20080715144631
  -his drv - 20090407140600
  -touchpad drv - 20080715144806
  -webcam drv & soft - 20080715144822

  Can someone help me with this?

  Hello

  As far as I know that the laptop supports the audio chipset Conexant CX20561 then you must install the Conexant audio driver!

  Please install the SP3 of XP Win first before install you the audio driver.

  PS: If the newer BIOS version has been released then update also!

  Greetings

• Mouse pad does not work

  A few months ago my mousepad stopped working for no. (obviously there must be one) reason. I noticed it after that I started to share music with other computers on our network. At first, I thought that the red light was something to do with it, then I discovered that the little symbol underneath was a mouse pad.

  My laptop no button on it that turn the pad on and apart, and properties of the Synaptics said that it works well and is connected to the right channel.

  Hello

  Check with support of their documentaton online and drivers, system manufacturer and ask in their forum
  (if there is one) that several will have keyboard shortcuts that will turn the Touchpad on or off.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad entered)
  and some come with a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary: (make sure that you have restarted at least once, if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The scrolling mouse suddenly does not work in all the guest OS. 10 workstation

  As of today, is no longer scrolling the mouse works on any guest OS I installed. All OSs are Ubuntu 64 bit (12.04 or 14.04). Installation of a guest operating system in fresh does not solve the problem, nor do reinstall the workstation.

  I wore a virtual machine on VirtualBox, and scrolling of the mouse is working there.

  I had added the following to the guest operating system a .vmx file yesterday:

  Mouse.vUSB.Enable = 'TRUE '.

  usb.generic.allowHID = 'TRUE '.

  mouse.vusb.useBasicMouse = "FALSE".

  However, the mouse behaved properly yesterday, and it's just one of several operating systems affected.

  Host OS: Win 7 Pro 64-bit

  Could it have been caused by round of updates from Windows yesterday?

  It was caused by the round of updates from Windows yesterday. Specifically, KB2973201, which is related to the keyboard on the screen of the features.

• Re: Satellite A300D - 15 c - external microphone does not work

  I have a Toshiba Satellite A300D - 15 c with Vista 32 bit.
  My microphone works fine, but I can't get the external microphone to work.

  I would really appreciate help with this problem.

  Thank you!

  Edit: The microphone is enabled of course, it is not cut and the level is set to max.

  Hello

  It looks more like a hardware problem, I mean a problem of external microphone jack what you think?

  Just a question;
  It is perhaps a silly question, but are you sure you used a right sleeve to 100%? Maybe you mixed the headphones with mic jack