Satellite A350D - error meassage apear everytime I log and BIOS problem

I have two problems here on bios and any error message please help me...

Thank you very much.. Merry Christmas...

Now, every time when I ' am turn my lap top before she continue to windows there is an error message always appearing.

Intel UNDI, PXE - 2.1 (build 082)
Copyrirgth (c) 1997-200 Intel Corporation

For Realteak RT8101E / 8102E PCI Ethernet Controller V1.09 (080602)
PXE - E61: Media Test translation, check the cable of

PXE - MOF: output of the PXE Rom

Honestly, I ' am afraid of what he will do to my computer...

Question:
What is the cause of the problem and how do I fixed this?

Before I encounter this error message, but after I opened my laptop that has been started.

Why I opened my laptop?

I have here some information that might help trace when this problem started...
before there is no password set in my security settings on the bios, I put the password in it. My mother borrowed my laptop so I decided to remove all the passwords that I put to him.

In my bios security settings
In the old password, I put my password then I leave empty the new password and retype the new password then I save and exit...

After that I can't go to my bios it still asks to put a password but I wonder because I already deleted it, I tried to put the password that I used before but I does not work...

I searched the internet on how to recover a bios password and I tried some of these suggestions
I am using Toshiba Satellite A350D - 20 K I've upgraded to windows 7 64 bit, I believe that there is no utility driver for my OS password so I can not use utility password, based on a suggestion that I read

I can reset my bios by removing the cmos / battery from inside my computer bios laptop so I decided to open my laptop but suddenly I have not found all the batteries inside...
After I opened my laptop, that was the time I started to encounter the error message...

Dear friend

Now the situation is more complicated. To be honest, that certain parts of your reports are not logical for me to be discussing this.

As you know in the BIOS boot options where you can set the boot sequence there. With other words, you can define which device should be the first, second and so on. To start notebook BIOS check this defined order and try to start the operating system. If the first boot device is not found for some second reason for notebook control device. If there is no portable bootable option check the following.

This message PXE occurs when the laptop cannot find the boot device and try to start the LAN (network card) device. Why does this happen? I put t know what the problem is here.
At this point, I have to say that I m really confused when you say that you can continue to windows after this message appears on the screen. How do you do that? Can you start preinstalled OS now or not?

BIOS password
This method with the removal of battery can run on desktop computers, but with laptops is the history a little bit different. If you are not able to remove or change the password of the BIOS, then you have a big problem. Now this can be done by only authorized service.

Tags: Toshiba

Similar Questions

  • Satellite A350D-113 - where can I download the older BIOS

    Any person, where can I download older version of BIOS for my satellite a350d?
    Here in dl driver toshiba there is only this "updated" version, but I need the original.

    Hello

    You won't find any older version of BIOS for this Toshiba laptop.
    You can always download the latest version of the BIOS from the page of the European driver Toshiba

    Perhaps the Toshiba ASP might help you guys should have access to older versions of BIOS

    Get in touch with local ASP and apply for assistance

  • Satellite A350D-20F - where can I find the first BIOS?

    Hello.

    Anyone know where to find the original BIOS for Toshiba Satellite A350D-20f and I don't mean version 1.5 Toshiba support page?

    Hello

    The first version of BIOS and all the old versions are no longer available. You can download the latest version on the Toshiba page.

    Usually new versions of BIOS solve problems then it of not possible to go back to the old version.
    Why do you want to go down there?

    Welcome them

  • Satellite A100: Error power USB from standby after update BIOS 5.20

    Hello

    I have problems of USB power since the upgrade my BIOS to 5.2 days on receipt of an email from Toshiba, advise the upgrade

    I got a 100 - 200 PSAA8E Windows XP Media Edition since the upgrade of the BIOS to 5.20 I get message error power but only when the computer comes out of standby

    The error message tells me that "a USB device has exceeded the limits of its hub port power.

    I have nothing connected to one of the USB ports

    I talked to guys tech at length to Toshiba, but they can't seem to explain or correct the problem - a same thought it could be a motherboard problem, but cut which like the timing is too coincidental to be something other than the upgrade of the BIOS.

    If anyone knows a fix, so I would be grateful - is - it possible to find a previous BIOS and roll back from 5.20

    I guess if it's the BIOS, then when they deliver another it will correct itself?

    Comments appreciated

    Phil

    Hello Phil

    Maybe again the stupid question, but I also want to know why you made the decision to do the BIOS update? Is there a particular reason or you just want to have laptop with the latest version of the BIOS.

  • ERROR POPS UP EVERYTIME I OPEN AND IT SAYS WINDOWS IMAGE ACQUISITION SERVICE IS MISSING

    MISTAKE TO REPLACE ON VISTA

    Hello

    1. When you receive the error message?

    2. did you of recent changes on the computer?

    3. do you have a printer or a scanner connected to the computer?

    Method 1

    Check and make sure that theAcquisition of Image Windows (WIA) service is running on the computer.

    one), click Start-Run, type "services.msc", click on OK.

    (b) when loading the Services window, go to the "Service Acquisition of Image Windows (WIA), double click on it to open it,

    (c) make sure that the "Startup Type" says "automatic". " If it isn't, use the drop down menu to change.

    (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

    Method 2

    If the previous step fails, see if any third-party program installed on the computer is causing the error message.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite C650 - 1 TC not to start properly and keyboard problem

    Dear forumers, hope you can help me help my mother :-)

    She has a Satellite C650-1 CT part No... PSC08E-03M001EN.
    Unfortunately, she was not able to use it because there was a power failure after she left on the mode 'sleep'.

    It starts and pressing f2 or f12 works. 95% + of the keyboard does not work.
    The arrow keys work only half the time and there is no way top select any option.

    I read the link below, but there is no option for 'repair your computer' and so I do not know what to do next.

    http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

    The laptop goes in a loop "the installation program starts services.

    Help is greatly appreciated!

    > It starts and pressing f2 or f12 works. 95% + of the keyboard does not work.
    > The arrow keys work only half the time and there is no way top select any option.

    You are able to use the external USB keyboard?
    Connect the external keyboard and check if you can select the recovery of HARD drive menu option.
    In case of malfunction of the internal keyboard, using the external USB keyboard should work.

    But if you will not be able to perform HARD drive recovery, even if the external USB keyboard is connected,
    I recommend you use the recovery disk.

    Have you created the recovery disc in the past?
    Do you have any other Microsoft Windows installation disc clean?

  • Satellite P200 - 10 c - places to find drivers and BIOS update

    Hello

    I have a Toshiba P200 - 10 c, and I can't find drivers for my laptop.
    In particular, I want to find the last update of the BIOS of my laptop.

    Could you help me?

    Satellite P200 - 10 c part of the PSPBGE series.
    The drivers can be found here:
    http://www.Toshiba.EU/innovation/download_drivers_bios.jsp?service=EU

    Choose product type archives to get drivers for the older models.

  • Runtime errors, weird invites you to download and weird problems, play games.

    Alright. Start with, I use Microsoft Security Essentials, Ad-aware, Spybot and keep Windows Defender up. I do not download music or movies or games. I keep it updated with the latest definitions and run full scans every two days.

    That said, there is a problem somewhere and I don't know what it is or how to fix it. Everything started when I opened a session on Yahoo! one day and noticed that it would allow me to open a message. AIM has simply refused to let me comment, too. In fact, any time when I needed a small window or application to appear, such as small pop window Yahoo! Insider-up news or screen beta for Starcraft 2, World of Warcraft news page, he tried to open it in a full window of Firefox.

    Try to connect on Yahoo! would cause future guests wondering where and if I wanted to save some files. Including an element called NAVCAN, iexplore.dll, various applications of the page and what you have. It's like infrastructure, the computer uses to distribute correctly these things disappeared.

    I don't know where I'm supposed to put, where they are supposed to go or how to get these files from data lost to go where they are supposed to be. When I go to start > maintenance and then select one of the options to try and use it, it loads a bit and then tells me Microsoft Vista had a runtime error c ++.

    I run Windows Vista 32, I think as an nation edition/standard.

    Wut do? :(

    Hello

    I suggest you try the following steps to refine the question

    Step 1: Put the computer in a clean boot and a test to see if the problem persists

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not the computer to start normal follow step 7 in the link.

    You can check with Yahoo and AOL about unable to access messages\Emails

    http://help.Yahoo.com/l/us/Yahoo/helpcentral/

    http://help.AOL.com/help/microsites/microsite.do

    To correct errors, download and install the latest Visual C++ runtime

    Microsoft Visual C++ Runtime Library

    http://support.Microsoft.com/kb/967060

    (Follow the method 3 in the above link)

    To check your version of Windows
    http://www.Microsoft.com/security/updates/CheckVersion.aspx

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite M50: Looking for an update of drivers and BIOS

    I brought my laptop Hong Kong model number: 7F014

    I'm looking for updates for my drivers and including any update of the BIOS... but there isn't any driver available for download or in HK from Toshiba site or its dealer Knight-itech...

    can someone help me?

    THX!

    [Edited by: admin on 21 January 06 11:12]

    Hi William,.

    You can try the drivers from the web site of Toshiba UK:

    http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK

    You can also get updates of BIOS, but make sure they are compatible with your model.

    Kind regards

  • Help! XP and BIOS problems! Satellite 2410

    Hi all

    I had trouble with XP Pro for a while and finally decided to reinstall XP Pro - easier said than done!

    My questions are:
    (1) how to access the bios so it starts from the CD?
    (2) once it reboots from the CD can just reinstall XP?

    Any help and advice is greatly appreciated!

    Thank you

    Trash

    Hi George,.

    Normally by pressing ESC when starting poster system BIOS load progress. You can try pressing and tenuous F2 which normally brings you to the CONFIGURATION of the BIOS screen and hold F12 that will take you to the SELECTION of BOOT menu, F8 will bring you to the boot option screen where you can select mode without FAILURE etc.

    Try to press F12 when the Toshiba start screen appears and see if you get the boot selection menu.

    HTH

  • Satellite A350D-201 - the video card is broken

    Satellite A350D-201 video card beat HD 3650 and it's on sale on eBay (ATI HD3650 512 MB K000065590 KTKAA LS - 4571P K000065580), not the new.

    The seller grants a 1 month warranty.
    What problems can be? (BIOS and others).

    A long time ago I ve changed GPU on old Satellite M70 and everything went well.
    What can be wrong?
    Only problem I see maybe you can t do it on the right way. If you are not experienced with this stuff I m afraid you can damage something.
    You want to do this alone?

  • Need Win XP drivers for Satellite A350D-10O

    Hallo,

    I need xp drivers for my Satellite A350D-10O?
    Can someone help me with this problem?

    Thanks for the reply

    Hello

    I think that the Satellite A350D-10O was equipped with the ATI Mobility Radeon HD 3650 graphics card.

    You can find Win XP drivers in the Satellite P300 series for example.

    Media v8.477 driver ATI ATI Mobility Radeon HD 34xx/36xx of chips.

    It should support your card too!

  • Satellite L750D - update BIOS 2.1 and its problem

    Hello

    I have little problem. I was downloaded from your website 2.1 BIOS for Toshiba Satellite L750D (PSK32E).

    I have been updating BIOS 2.1 and start the problem with the sound. When I start the game, music or else minutes 2 first sound plays correctly but then it stops without reason. No noise at all. I've been reinstalled op system but the problem is still there.

    Sound works for 2 minutes only then is completely off. Each application to start with sound plays 2 minutes and stop all silent is. I did a probe on my laptop the mother she s a computer portable twin. I have updated bios same problem 2 minutes and then no sound. My OS is win 8 64 pro my laptop mother is with win 7 x 64 premium.

    Two BIOS updated ver 2.1 on L750D and the problem is the same. Please fix the BIOS.

    The BIOS seems to be very old. I was released nearly 1.5 years ago, so to be honest, I doubt that his and BIOS problem.

    I had the similar problem with my other laptop equipped with a Realtek sound card.
    The sound appeared after connection and remove the headphone jack
    But I could solve this latest installation updated audio driver the Realtek driver page.

    But it seems that your Satellite does not support Realtek audio chip but the Conexant audio chip.
    Therefore, the solution could not be useful for you.

    However, I think that you need to update the audio driver. I recommend you google for driver Conexant SmartAudio HD and test the latest version of the driver available.
    On the internet, I find the Conexant SmartAudio HD driver version 8.65.9.51 for Win 7 / 8 Win / Win 8.1
    Not quite sure if this is the latest version, but you can test it.

    To manually update your driver:

    1. go into the Device Manager (right click on my computer, choose manage and then find Device Manager in the left panel)
    2. right click on the device you want to update and choose Update driver software
    3. choose Select the location of the new driver manually and navigate to the folder where you downloaded the driver

  • After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

    After installing IOS 9.3 for Ipad3. I can't activate iPad by Apple ID display error meassage «e-mail cannot be used to unlock the iPad»

    If you see the lock of Activation screen after update your iOS device, you want to try the following:

    -Restart your iOS device and try to connect again.

    -Visit appleid.apple.com and log in to ensure that your password is correct.  If you change something here, only to change your password.  Try to connect again on the iPhone.

    -Connect on iTunes on a computer and put your Apple ID and password when it prompts you (as it did on your iOS device).

    -ICloud.com check in the settings.  If you see your iOS device listed, remove account (do not erase or hit lost mode). Restart your device and try to reconfigure.

    -These measures should solve most of the problems.  For someone else, you will need to contact Apple (1-800-MY-APPLE or getsupport.apple.com).

    I hope that helps!

  • Satellite A305 - error message keep appearing from

    Hello, I have a Satellite A305-S6857 laptop
    A few days ago to XP downgrade Vista. It worked well but suddenly yesterday when I restart windows,.

    * the system has recovered from a mistake of the serosa

    A log of this error has been created

    For more information about this error, click here * so I clicked and it said

    error signature
    BCCode: 1000007e BCP1: C0000005 BCP2: BA430F76 BCP3: BA513C94
    BCP4: BA513990 OSVer: 5_1_2600 SP: 3_0 product: 256_1

    So I simply ignored, did cancel but it keep poping up and I made reports but it did not work either.
    So I restart again but still the same. Every time I have restart this pop-up.

    So I googled on this topic and I've done something and I think after I did uninstall and reinstall a driver GMA an another error message too. It says * the Publisher could not be verified. are you sure you want to run this software? * and I say yes, he shows me another one same thing 3times.

    It's really annoying and after that I got a few messages pop up, my computer has become slow and sometimes it stopped

    help me guys...

    > He says that the Publisher could not be verified. are you sure you want to run this software?
    Maybe something wrong with the graphics card driver or other software which is not certified by Microsoft

    Did you use some third-party software, tools and 3rd applications?
    Have you installed the drivers from Toshiba or other websites of third 3rd page?

    Check the msconfig-> Start up tab and take a look at the list of background processes.
    If there are some applications that are not known to you, then turn it off.

    In the worst cases, you need to reinstall the OS.

Maybe you are looking for

  • AT & T and iOS 10

    Since the update to IOS 10, my att Air iPad constantly loses service

  • Photoanalysisd process overheating my Mac on macOS Sierra

    Hello world!! I just upgraded to macOS SIerra in the Air of my Mac and I noticed that a process called 'photoanalysisd' is currentlu taken almost 90% of my CPU and overheat my Mac Anyone know what do do this process and whether he can be killed? (tri

  • VERY slow photo - does not load

    I have constant problems with Apple TV.  I have the latest model and the software. Photos will generally display thumbnails of all the pictures, but I can't ever see when selected.  She just a spinning top trying to load them and never stops and it n

  • Recovery system causing problems with the size of the screen.

    Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, wi

  • How to use a container in a StackLayout space remaining

    My root container has a StackLayout with orientation presentation TopToBottom. It contains two containers. The 2nd container contains or pushbuttons so its height adjusts automatically by Cascades. I want the first container to occupy all the space r