Satellite A500 - 1C0 - Bluetooth monitor does not start

Similar Questions

• Error 1079 / base OS Windows 8 / Bluetooth service does not start

  Error 1079 / base OS Windows 8 / Bluetooth service does not start - I tried service.msc-> selecting Bluetooth support Service-> properties-> log on-> This account-(Administrator) / (NT AUTHORITY\LocalService) / / but nothing works, I had searched a lot on this problem but there is no solution to the problem of basic windows 8 (built in) only for win 7 and windows server... .but not for the basic version of windows 8 that I have...

  Now when I click to start the Bluetooth support service it always says error 1079...

  Hello

  Please, try the steps here to solve this problem:

  http://www.kapilarya.com/services-failed-to-start-in-Windows-8-1

  Hotfix applies to Windows 8 too and you must only put NT AUTHORITY\LocalService on the properties of the service.

  Hope this helps, good luck :)

• Satellite A200-1 body weight does not start

  Hello

  I have a Toshiba Satellite A200-1BW model that frooze all to use and would not start again.
  I have checked all the power drive options very well.

  I have the blue AC power led on and the orange light but pc does nothing. I tried to power up without battery with AC, but always the same question.
  No fans don't come on etheir. PC won't in the start-up phase, and nothing appears on the screen that is constantly empty.

  I don't get the HDD 200 GB startng so I swapped it for a work of identical spare but the pc still does not start.

  My only conclusions are that I have a dead motherboard or a power problem internal.

  Its the real frist problem I've had with this laptop so am just checking to see if anyone out there has had the same problem or knows all the patches, I have not tried.

  Yes, that sounds like a serious hardware failure.
  Looks like the motherboard, GPU, or another party on the mobo may be defective.

  What about RAM modules? Did you check both?
  Please do

  Otherwise if there s no RAM issues then you will need a professional technician help.
  At the moment I put t see any other solution you :(

• Satellite L505 - 10 M - fan does not start

  I have a problem with my Satellite L505 - 10 M.

  Suddenly the fan does not start over and because of this, the laptop get quickly overheated and stops. I installed Windows 7 top me, quite some time ago, and this time it was 2 weeks ago while it just happened this evening. I have not installed anything new and nor I did something special with him, he just does not start fan more.

  I checked this forum, cannot find anything either, searched and could not find any problems with Linux and the fan, but not Windows (it does not start at the start of the bios either).

  If anyone has a thought, a similar experience or a solution, it would be really useful

  Greetings,
  JanPieterz

  Hey Buddy,

  You have installed Windows 7 Microsoft disc or Toshiba Recovery disk?

  Well, if the fan doesn't start anymore, you can t a lot and I think that the fan needs to be replaced.
  What you can do is load default settings in the BIOS (press F9 key in the configuration of the BIOS) and save settings. Also clean your laptop using a jet of compressed air, maybe the fan will be blocked by the dust.

  If he doesn t it work s time to contact a technician for laptop. If your laptop is under warranty, the repair will be free. :)

• Satellite L850: Catalyst Control Center does not start

  Hello, I have an AMD 7670 m dedicated graphics card and when I install the AMD display drivers downloaded from the toshiba site, the Catalyst control does not start and he also seem to have problems with the usb ports and my wireless stops working for some reason any.

  Is that what I can do on it or am that I better use the downloaded drivers directly from AMD? Thank you

  Maybe stupid question now, but why do you need it? Have you been preinstalled OS with your laptop or you bought for laptop computer without an operating system preinstalled?

  What model do you have exactly (L850-xxx)?

• Fan of Satellite U500 - 11 c sometimes does not start running Win 7 64 bit

  Hello

  I have two Toshiba Satellite U500 - 11 c on Windows 7 Home Premium 64-bit. Sometimes, after a new start of Windows, the fans start and just run a few seconds sometimes. When this occurs, the CPU temperature gets very hot (do not know exactly how much). I found a way to return to a behavious normal just unplug the power cable and reconnect it just a second or two after.

  Two laptop computers have the latest Bios and drivers of Toshiba. Somehow, it's the same behavious as under Linux.

  With these experiences, I just thought that Toshiba laptop are not well properly handle ACPI Fans and tempartures. Is it really inevitable?

  I hope that this feedback can help...

  Hi mate

  Cooling modules are controlled by the fan which is stored in the BIOS table.
  Fan table contains details and information when and how fast a fans should run.

  Besides computers laptop Toshiba supports protection against overheating. This protection monitors the temperature, and if the temperature is too high, the laptop turns off automatically.

  If the laptop does not turn off automatically then I suppose that the temperature is not too high

• Satellite A500-17 x - wifi does not work - not found in Device Manager

  Hi people,

  I need help please.

  My wireless adapter does not work.
  It worked perfectly until I connected to a wired connection in a hotel I was staying in and since then I can not connect to my wireless router.

  I tried restoring the tosystem several times to old dates, but it has not solved the problem. When I restart the computer laptop and go into devices and printers, I thought that the computer needs to be troubleshooted.

  The program runs and try to install the driver for the Wlan but returns with errors. Namely, windows could not load the driver or can verify the digital signature.

  There is also no icon in the network for lan wlan connections only. When I use the radar in connectivity doctor tells me that the WiFi network is disabled but I can't understand how to activate it.

  When I start in safe mode and go to Device Manager I see the wireless network adapter, but when I try to install the driver I leave safe mode and restart. I did and then the WiFi network is displayed in the Device Manager but when I try to load the driver, I thought that the driver is updated and then the adapter disappears from the Device Manager.

  I'm so frustrated at this point and I'm very close to a full erase and start over.

  I also tried to reload and load the default configuration settings in the installation program, but didn't make any difference.

  My laptop is a Satellite A500-17 x with windows 7 64 bit.
  The WiFi network is Realtek RTL8192E Wireless Lan 802.11 PCI - ENIC

  Hello

  Go to BIOS (press F2) and set it to default settings.
  Save the changes and restart the device.
  Then try to reinstall the WLan driver again.

  If that does not help, download the most recent and updated BIOS to BIOS first day.
  Then, restart the device and try reinstalling the Wlan driver.

  Last but not least you could test the WLan feature on laptop running with factory settings current (after using the Toshiba Recovery)

  PS: in order to use the WiFi network you must use the FN + F8 key combination and must turn on the WLan (in front of the laptop) switch to position.

• Satellite A500-1f5 - FN key does not work with Win 7 64 bit

  Hello

  The FN key does not work

  I have the installer: added value package + Flash Cards Support utility

  Laptop model: Satellite A500-1f5

  WIN 7 64 bit

  Thank you

  Hello

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

  or remove the vap utility and support of flashcard and download:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Then install the utiliy and flashcard Vap, support.

• Satellite A500-17 x - micro does not work after BIOS update

  I have a Toshiba Satellite A500-17 x which I have just updated the BIOS to version 2, as recommended by the tempro software. Now with the new update my microphone does not work. Where can I download a copy of the old BIOS?

  ({I used winphlash64 in advanced mode to restore the original backup, it does to the computer, but it just gives the new bios to}) Thank you rich

  Hello

  BIOS cannot be demoted in windows mode.
  Even if you use an older version of BIOS update, you will get an error message saying that the latest BIOS version is already installed. So, forget the downgrade.

  By the way: I put t think the update of the BIOS assigned the microphone.

  Go to control panel of-> sound-> recording tab.
  Here you will see all the available recording devices (micro)

  Activate the microphone it (in this case the people with reduced mobility) and set its default value.

  Where it works: reinstall the audio driver.

• Satellite A135 black screen and does not start

  I have a Satellite A135 with windows vista and I have not used in more than a year.
  I went to use it today and it turns on but the screen is blank. I can't even see not the bios.

  I tried the usual things, connect to a monitor, removed the chip of ram from the back and tried another one, I also tried power alternative only with no luck.

  All the ideas it might be.

  Thanks for the help

  Hello

  If the BIOS page does not appear, then it s a serious question.
  Seems that the motherboard is dead.

  In my opinion, a technician should check this section first, and perhaps you will need a new

  Motherboards are parties, then perhaps it s not an option for you

• Satellite L650D-10J - Windows 7 does not start

  Hello

  I have a Toshiba Satellite L650D-10J, Windows 7 64 bit, 4 GB RAM and it do not start Windows 7. He begins to see you logo startup Toshiba etc and then it goes to black and it loads Bootmanager of Windows with the following message;

  + A problem on your computer has occurred during communication with a device that is connected. +

  + This error can be caused by an external storage device as a drive external USB, the device in use, or damaged hardware such as a hard drive or CD-ROM drive disconnect that is damaged. Make sure that all removable storage is properly connected, and then restart your computer. +

  + Contact the hardware manufacturer, if you still see this error. +

  + Status: 0xc00000e9 +.
  + Info: an unexpected I / O error has occurred. +
  (it has been translated by the Dutch there are some sentences that are incorrect.)

  I tried to download a Windows 7 recovery disk, it burned on DVD. It works, I'll get to choose where he was working to correct (I get an error) or use a Windows 7 from disc (does not work). And if I start it in safe mode I see that it stops and freezes to the file; Disk.sys

  Someone at - it an idea?

  Greetings,

  Hello

  And have you connected an external USB device as says the error message? If Yes, remove all USB devices and try to restart your laptop.

  If you can t start in safe mode, your operating system is confusing upward and the only option to get rid of it is to reinstall Windows.

  You use the preinstalled version of Windows 7 in Toshiba? If yes go to the start menu Windows by pressing the F8 button where you can select the safe mode, etc. and choose Advanced repair my computer option. Then select Toshiba HDD recovery and factory settings are restored. Also see this article on HARD drive recovery:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R01.htm

  If disk HARD recovery doesn't work, you need an original Toshiba recovery disc. If you didn t create this drive just order a new one here:
  https://backupmedia.Toshiba.EU/landing.aspx
  ?

• Satellite A100 - BIOS and Windows does not start after the BIOS update

  Hello, I extend my Satellite A100 laptop BIOS.

  After update, I can't start my laptop and the BIOS will not start.

  You see the Toshiba logo?

  Was there a power failure when you updated the BIOS?

  Try to remove the battery and the adapter and leave for a few hours. You can also try reinstalling the RAM.

  If this does not help, you will need to send it to a Service Center for repair.

• Satellite A500-138 - lighting buttons does not work even in the BIOS

  Hello.

  I'm just curious to know if anyone else has a problem with the (play/pause excatly) multimedia keyboard backlight? Mine died today, and there is nothing I can do to make it work again.

  The key still works, but when I turn on the backlight, backlight on everyone, but the play/pause (the backlight of the other keys work, touchpad and Satellite logo too).

  I use Windows 7, but the problem persists even in the BIOS.

  I think the backlight of the button is just dead.

  I have to admit I'm really disappointed with this laptop. Config is great, design and are also involved, but I can just take the couine noise that makes C2D (RMClock, one utility, I know that to solve this problem, does not recognize the A500 motherboard) and the fan almost never works to 70%, and now that the backlight...

  If the backlight of the multimedia key stops working after 3 weeks of use, which will be in the future? It's too scary to think ;)

  I was really excited by Toshiba, but day after day I come to the conclusion, that it is the first and the last laptop that I bought at Toshiba - never had similar problems on other laptops, same nonames.

  Of course, I know that I can has sent for fix, I guarantee (and wait about a month to get a backlight fixed stupid). But why hell not the backlight stoped working, if LEDs vitality is long as hell? It can mean two things: I really don't have a chance, or Toshiba did not pay too much attention to detail during production A500s. And after 3 weeks of use, I fear that the second option is much more likely...

  Then, someone has a feeling similar to this topic? And someone has a problem with backlight?

  Hello

  He damage of s to hear that your light has stopped working, but I think that it s just a software problem.
  I have a Satellite A500 equipped with buttons of enlightenment and everything works great with Vista and XP I m very satisfied.
  Unfortunately until that yet I didn't test with Win 7.

  I doubt you want to send this laptop for ASP, as I said, there seems to be a software problem and you can find it easily
  You must set the notebook to factory settings I mean that you must use the recovery disc in order to get the same State as on the first day of purchase

  Moreover, I visited the European driver of Toshiba page and, unfortunately, I didn't see no Win 7 drivers for this series at this time
  I guess that Windows 7 drivers will be released in the near future.
  So I wonder how you came to the button illumination because this feature requires the Toshiba driver and tools as well as the drivers aren't there?  :|

• My Satellite L50 - A - 1 9 does not start

  My laptop can start. The power button does not work and there is not all the light signals when connected to load. Any thoughts? How can I remove the battery.

  The laptop is L50 - A satellite - 1 9

  Hello

  On your model of laptop, you can't remove battery. It is placed under the hood and it should be removed by authorized personnel only.
  But your model has the force to close the holes that you can also use to reset the laptop. How it works, you can read on https://aps2.toshiba-tro.de/kb0/TSB3C03JR0000R01.htm

  Please test. I hope this will help you

• Satellite S50-B-12Z - recovery does not start

  Hi guys.

  I have Toshiba Satellite S50-B-12Z
  I can't start the recovery.

  When I press the 0 key starting system, information about recovery happens.
  I answer YES to the question if I want to continue the recovery and after this system appears as normal takes just a bit longer.

  What will happen? I remember I managed to enter the recovery menu once but can't remember how.

  I taught maybe I deleted the partition by mistake, but partition magic shows he's still there (not used status).

  Any ideas why menu recovery will not come to the top?

  Hold F12 for power up to display the start menu.

  If "HDD Recovery" is not found, or its load fails, this means that the recovery partition has a problem.

  You can order on the site of Toshiba recovery disks.